Microwave Induced Synthesis of 3‐Aryl‐6‐(6‐/8‐substituted 4‐chloroquinoline‐3‐yl) ‐ s ‐triazolo [3,4‐b] −1,3,4‐thiadiazoles

The condensation of 4‐amino‐3‐aryl‐5‐mercapto‐1, 2, 4‐triazoles (1a‐f) with 6‐/8‐substituted 1,4‐dihydro‐4‐oxo‐quinoline‐3‐carboxylic adds (2a‐d) in the presence of phosphorus oxychloride on refluxng or under microwave irradiation gave twenty four novel 3‐aryl‐6‐ (6‐/8‐substituted 4‐chloroquinoline‐3‐yl)‐s‐triazolo[3,4‐b]‐1, 3,4‐thiadiazoles (4a‐x), Considerable increase in the reaction rate has been observed with improved yields under microwave irradiation. The structures of the compounds synthesized were determined by elemental analyses, IR, ¹H NMR and MS spectra. Their spectral properties and the reaction mechanism were also discussed. The preliminary biological test showed that some of compounds bad moderate antibacterial activities.     

Synthesis of (−)‐3‐Carene‐2,5‐dione via Allylic Oxidation of (+)‐3‐Carene

Activated carbon‐supported CuCl₂ (CuCl₂/AC) is a heterogeneous catalyst for the liquid‐phase selective allylic oxidation of (+)‐3‐carene with tert‐butyl hydroperoxide (TBHP) and O₂ to produce (?)‐3‐carene‐2,5‐dione. The possible reaction mechanism and the effects of different factors on the allylic oxidation were investigated. The optimal conditions are as follows: reaction temperature, 45 °C; molar ratio of CuCl₂ to (+)‐3‐carene, 1%; volume ratio of (+)‐3‐carene to TBHP, 1:3; and reaction time, 12 h. Under the optimal conditions, the conversion of (+)‐3‐carene reached 100%, whereas the selectivity for (?)‐3‐carene‐2,5‐dione reached 78%. The CuCl₂/AC catalyst was characterized via X‐ray diffraction, and the chemical structure of the target compound was identified via infrared spectroscopy, proton nuclear magnetic resonance spectroscopy, mass spectrometry, and optical analysis.     

Synthesis and Antibacterial Activity of 3‐(5‐Methylisoxazol‐3‐yl) −1,2,4‐triazolo [3,4‐b]‐1,3,4‐thiadiazine Derivatives

The condensed products 2‐10 of 4‐amino‐5‐mercapto‐3‐(5‐methylisoxazol‐3‐yl)‐l,2,4‐triazole (1) with chloroacetaldehyde, 2‐bromocyclohexanone, chloranil, ωbromo‐ω‐(1H‐1, 2,4‐triazol‐l‐yl)acetophenone, 2‐bromo‐4′‐substituted acetophenones and 2‐bromo‐6′‐methoxy‐2′‐acetonaphthone were described. The antibacterial activities were also evaluated.     

A Fast Assembly of （-）-Epigallocatechin-3-gallate [（-）-EGCG] via Intra- and Inter-molecular Mitsunobu Reaction

This paper described a concise construction of （-）-EGCG （1f） （with an overall yield of 20% for seven steps based on the starting cinnamyl alcohol derivative 3）, featuring asymmetric dihydroxylation （ADH）, intra- and inter-molecular Mitsunobu reaction as key steps. Our strategy disclosed herein constitutes a new effective general synthetic approach toward the analogues of （-）-EGCG （1f）.     

Natural (−)‐Vasicine as a Novel Source of Optically Pure 1‐Benzylpyrrolidin‐3‐ol

A facile and scalable methodology for the preparation of optically active (3S)‐1‐benzylpyrrolidin‐3‐ol ( 3 ), an important drug precursor, is reported. Starting from the naturally occurring alkaloid (?)‐vasicine ( 1 ), a major alkaloid of the plant Adhatoda vasica, 3 was obtained in 84% overall yield (Scheme 3).     

A Practical and Enantiospecific Synthesis of (−)‐(R)‐ and (+)‐(S)‐Piperidin‐3‐ols

A highly enantiospecific, azide‐free synthesis of (?)‐(R)‐ and (+)‐(S)‐piperidin‐3‐ol in excellent yield was developed. The key step of the synthesis involves the enantiospecific ring openings of enantiomerically pure (R)‐ and (S)‐2‐(oxiran‐2‐ylmethyl)‐1H‐isoindole‐1,3(2H)‐diones with the diethyl malonate anion and subsequent decarboxylation.     

Synthesis and Antiproliferative Activity of 6‐Ferrocenyl‐3‐Substituted 7H‐1,2,4‐Triazolo[3, 4‐b]‐1,3,4‐Thiadiazines

Five new 6‐ferrocenyl‐3‐substituted 7H‐1,2,4‐triazolo[3, 4‐b]‐1,3,4‐thiadiazines ( 3a‐e ) have been synthesized and characterized on the basis of elemental analyses and spectral data. The antiproliferative activities were examined in two human cell lines (BJ and HT 1080) with the acid phosphatase assay. The results showed that all compounds could reduce cell viability. The significant difference between the two cell lines was that fibrosarcoma HT 1080 cells could indeed be more susceptible to the compounds than the normal fibroblast BJ cells.     

Synthesis of 6‐Alkylidene‐5,6‐dihydro‐4H‐1,3‐thiazine Derivatives via the Cyclization of N‐3‐Bromo‐3‐alkenylthioamides

By the treatment of N‐3‐bromo‐3‐alkenylthioamides with sodium hydroxide in DMF‐H₂O in the presence of tetra‐butylammonium bromide, series of 6‐alkylidene‐5,6‐dihydro‐4H‐1,3‐thiazine derivatives were prepared in moderate to good yields. The cyclization is supposed to proceed via both the intramolecular vinylic nucleophilic substitution and the elimination‐addition mechanisms (formation of acetylenic intermediates) in a competitive manner.     

Formation of [Bi11]3−, A Homoatomic,Polycyclic Bismuth Polyanion,by Pyridine‐Assisted Decomposition of [GaBi3]2−

Until now, polycyclic bismuth polyanions have not been known—thus discriminating bismuth from its lighter congeners. However, the synthesis of [K([2.2.2]crypt)]₃(Bi₁₁)?2 py?tol, allows us to present the first structurally characterized homoatomic, polycyclic bismuth polyanion, which exhibits the [P₁₁]^3? “ufosan” structure. It was obtained upon treatment of [K([2.2.2]crypt)]₂(GaBi₃)?en with the solvent pyridine. The binary Zintl anion [GaBi₃]^2? decomposes under oxidative coupling of pyridine molecules and release of H₂ to form the title compound. The unprecedented reaction, its products and by‐products were investigated by means of spectroscopy, spectrometry, and DFT studies. All findings reveal the specific reaction conditions to be crucial for the formation of the [Bi₁₁]^3? ion—and indicate the possibility of the generation and isolation of further, large bismuth polyanions.     

Layer‐by‐layer Assembled Multilayers of Graphene/Mono‐(6‐amino‐6‐deoxy)‐β‐cyclodextrin for Detection of Dopamine

Graphene/mono‐(6‐amino‐6‐deoxy)‐β‐cyclodextrin multilayer films composed of graphene sheet (GS) and mono‐(6‐amino‐6‐deoxy)‐β‐cyclodextrin (NH₂‐β‐CD) were fabricated easily by two steps. First, negatively charged graphene oxide (GO) and positively charged mono‐(6‐amino‐6‐deoxy)‐β‐cyclodextrin (NH₂‐β‐CD) were layer‐by‐layer (LBL) self‐assembled on glassy carbon electrode (GCE) modified with a layer of poly(diallyldimethylammonium chloride) (PDDA). Then graphene/mono‐(6‐amino‐6‐deoxy)‐β‐cyclodextrin (GS/NH₂‐β‐CD) multilayer films were built up by electrochemical reduction of graphene oxide/mono‐(6‐amino‐6‐deoxy)‐β‐cyclodextrin (GO/NH₂‐β‐CD). Combining the high surface area of GS and the active recognition sites on β‐cyclodextrin (β‐CD), the GS/NH₂‐β‐CD multilayer films show excellent electrochemical sensing performance for the detection of DA with an extraordinary broad linear range from 2.53 to 980.05 µmol·L^?1. This study offers a simple route to the controllable formation of graphene‐based electrochemical sensor for the detection of DA.