Reversible Thermally Responsive and Luminescent Coil–Rod–Coil Triblock Copolymers

A functional coil–rod–coil triblock copolymer containing a terfluorene unit as the rigid segment and poly(N‐isopropylacrylamide) (PNIPAAm) as the flexible block was successfully synthesized via reversible addition–fragmentation chain‐transfer (RAFT) polymerization using terfluorene‐based dithioester as the RAFT agent. The temperature‐responsive optical properties were investigated with the aid of dynamic light scattering and fluorescence techniques. Additionally, the relationship between the optical properties and the reversible phase transition of the doping system formed by blending the copolymer with tetraphenylporphine tetrasulfonic acid was studied. Above the lower critical solution temperature, the energy transfer efficiency decreased as a result of the globule–to–coil transition from PNIPAAm segments. The result indicates that these copolymers have a potential to be used as responsive fluorescent probes in facile detection of dye‐labeled biopolymers.

     

Zweifach phosphonylierte Triphenylphosphane – neue Liganden mit ausgezeichneter Wasserlöslichkeit

Triphenylphosphine Diphosphonates – New Ligands with Excellent Water‐Solubility A highly selective method for the functionalization of triarylphosphines with phosphonate moieties has been developed. New ligands with excellent solubility in water, such as the previously unknown triphenylphosphine‐diphosphonates PhP[3‐C₆H₄–PO₃Na₂]₂ and PhP[4‐C₆H₄–PO₃Na₂]₂, are accessible by this efficient synthesis route.     

Aluminum/Nitrogen Cycles and an Open Cage with Al–H and N–H Functions

The cyclic tert‐butyl‐amino alane dimer [tBu–N(H)AlH₂]₂ ( 1 ) was obtained from reaction between alane with tert‐butylamine and its boranate derivative [tBu–N(H)–Al(BH₄)₂)]₂ ( 2 ) subsequently from 1 by hydride/chloride exchange using PbCl₂ followed by reaction with LiBH₄. Both compounds form four‐membered Al₂N₂ cycles with typical Al–N bond lengths of 1.940(5) Å ( 1 ) and 1.945(5) Å ( 2 ) as found from X‐ray diffraction analysis. The tert‐butyl substituents at the nitrogen atoms may be situated at the same side of the ring (cis) or at opposite sides (trans). For compound 1 both isomers are present in solution, showing particular temperature dependent NMR shifts. In the solid both compounds 1 and 2 adopt the trans arrangement. When 1 is reacted with PbCl₂ in half of the molarity ratio used for 2 , surprisingly the novel compound 3 , a zwitterion, can be obtained: [(tBu–N)(Al–H)₃(tBu–N(H))₃Cl((H)N–tBu)₃(Al–H)₂(Al–Cl)(N–tBu)]⁺[(tBu–N)(tBu–N(H))(AlCl₂)₂]^–. X‐ray structure analysis reveals that the anion is made of a tert‐butyl amino aluminum dichloride dimer (central Al₂N₂ ring) with one of the two nitrogen atoms being deprotonated. The cationic counterpart consists of three entities: (i) There is a first seco‐norcubane like Al₃N₄ basket with tert‐butyl groups at the nitrogen atoms, two hydride and one chloride ligand at the aluminum atoms and three hydrogen atoms on the open side of the basket, all pointing in the same direction; (ii) There is a second similar Al₃N₄ basket with the same substituent pattern except that all aluminum atoms have exclusively hydrogen ligands; (iii) Both baskets coordinate a central chloride through the six protons at the open nitrogen face of the baskets in such a way that the chloride lies in the center of a H₆ trigonal anti‐prism [mean H–Cl–H = 56.1(9)°]. As each of the open cages has a positive charge the overall charge by combination with the chloride adds to +1. The structure of the cationic part of 3 is unprecedented in AlN polycycles.     

Amphiphilic conetworks. II. Novel two‐step synthesis of poly[2‐(dimethylamino)ethyl methacrylate]–polyisobutylene,poly(N‐isopropylacrylamide)–polyisobutylene,and poly(N,N‐dimethylacrylamide)–polyisobutylene hydrogels

Amphiphilic polymer conetworks consisting of hydrophilic poly[2‐(dimethylamino)ethyl methacrylate], poly(N‐isopropylacrylamide), or poly(N,N‐dimethylacrylamide) and hydrophobic polyisobutylene chains were synthesized with a novel two‐step procedure. In the first step, a methacrylate‐multifunctional polyisobutylene crosslinker was prepared by the cationic copolymerization of isobutylene with 3‐isopropenyl‐α,α‐dimethylbenzyl isocyanate. In the second step, the methacrylate‐multifunctional polyisobutylene crosslinker, with a number‐average molecular weight of 8200 and an average functionality of approximately 4 per chain, was copolymerized radically with 2‐(dimethylamino)ethyl methacrylate, N‐isopropylacrylamide, or N,N‐dimethylacrylamide into transparent amphiphilic conetworks containing 42–47 mol % hydrophilic monomer. The synthesized conetworks were characterized with solid‐state ¹³C NMR spectroscopy and differential scanning calorimetry. The amphiphilic nature of the conetworks was proved by swelling in both water and n‐heptane. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 6378–6384, 2006     

Interpnictogen Compounds with Polarised Phosphorus–Element Bonds

Metathesis of chloro‐substituted N‐heterocyclic phosphanes, arsanes, and stibanes with lithium tetraethylphospholide or ‐arsolide gave interpnictogen compounds 2 – 4 with As–P or Sb–P bonds, respectively. The products were characterised by analytical and spectroscopic data and single‐crystal X‐ray diffraction studies. All compounds feature central E–E′ bonds that are notably longer (5–12 %) than standard bond lengths, and the As–P bond in the isomers 2 and 3 which are merely distinguished by formal exchange of the pnictogen atoms between both rings differ by some 4 pm. The observed structural features suggest that compounds 2 – 4 may, like the corresponding diphosphanes, be perceived as adducts of Lewis‐pairs which are held together by a dative interpnictogen bond.     

Synthesis and characterization of a novel organic–inorganic hybrid salt and its application as a highly effectual Brønsted–Lewis acidic catalyst for the production of N,N′‐alkylidene bisamides

In this research, a novel organic–inorganic hybrid salt, namely, N¹,N¹,N²,N²‐tetramethyl‐N¹,N²‐bis(sulfo)ethane‐1,2‐diaminium tetrachloroferrate ([TMBSED][FeCl₄]₂) was prepared and characterized by Fourier‐transform infrared spectroscopy (FT‐IR), energy‐dispersive X‐ray spectroscopy (EDX), elemental mapping, field emission scanning electron microscopy (FE‐SEM), X‐ray diffraction (XRD), thermal gravimetric (TG), differential thermal gravimetric (DTG), and vibrating‐sample magnetometry (VSM) analyses. Catalytic activity of the hybrid salt was tested for the synthesis of N,N′‐alkylidene bisamides through the reaction of benzamide (2 eq.) and aromatic aldehydes (1 eq.) under solvent‐free conditions in which the products were obtained in high yields and short reaction times. The catalyst was superior to many of the reported catalysts in terms of two or more of these factors: the reaction medium and temperature, yield, time, and turnover frequency (TOF). [TMBSED][FeCl₄]₂ is a Brønsted–Lewis acidic catalyst; there are two SO₃H groups (as Brønsted acidic sites) and two tetrachloroferrate anions (as Lewis acidic sites) in its structure. Highly effectiveness of the catalyst for the synthesis of N,N′‐alkylidene bisamides can be attributed to synergy of the Brønsted and Lewis acids and also possessing two sites of each acid.     

Application of Suzuki–Miyaura and Buchwald–Hartwig Cross‐coupling Reactions to the Preparation of Substituted 1,2,4‐Benzotriazine 1‐Oxides Related to the Antitumor Agent Tirapazamine

Many 1,2,4‐benzotriazine 1,4‐dioxides display the ability to selectively kill the oxygen‐poor cells found in solid tumors. As a result, there is a desire for synthetic routes that afford access to substituted 1,2,4‐benzotriazine 1‐oxides that can be used as direct precursors in the synthesis of 1,2,4‐benzotriazine 1,4‐dioxides. Here we describe the use of Suzuki–Miyaura and Buchwald–Hartwig cross‐coupling reactions for the construction of various 1,2,4‐benzotriazine 1‐oxide analogs bearing substituents at the 3‐position, 6‐position, and 7‐position.