A Pretreatment Method for GC–MS Determination of Endocrine Disrupting Chemicals in Mollusk Tissues

Automatic soxhlet extraction followed by silica gel cartridge cleanup process was developed as a pretreatment method for GC–MS determination of seven endocrine disrupting chemicals in mollusk tissues. Operation parameters including extraction time, adsorption flow rate and elution flow rate were optimized as 140 min, 2 mL min^?1 and 2 mL min^?1, respectively. Thirty percent dichloromethane in n-hexane and 70% dichloromethane in n-hexane were used as elution solvents in turn. Recovery rates were 93.7, 91.7, 84.5, 83.3, 88.4, 81.2, and 79.7% for nonylphenols (NPs), bisphenol A (BPA), 17α-ethynylestradiol (EE2), estrone (E1), 17α-estradiol (17α-E2), 17β-estradiol (E2), and estriol (E3), respectively. Acceptable relative standard derivations ranged from 8.5 to 12.1%. Method detection limits ranged from 0.27 to 0.68 ng g^?1 dry weight (dw), and quantitative detection limits ranged from 0.62 to 1.26 ng g^?1 dw. The method was successfully applied to five mollusk species in Dapeng Bay of China to verify its practicability, and NPs, BPA, EE2, E1 and 17α-E2 were detected in the range from 1.6 to 131.5 ng g^?1 dw.     

A Novel Derivatization Method Coupled with GC–MS for the Simultaneous Determination of Chloropropanols

A sensitive and rapid derivatization method for the simultaneous determination of chloropropanols [1,3-dichloropropan-2-ol (1,3-DCP), 2,3-dichloropropan-1-ol (2,3-DCP) and 3-chloropropane-1,2-diol (3-MCPD)] has been developed. The three chloropropanols were silylated with 1-trimethylsilylimidazole and then determined by GC–MS. n-Undecane was used as the internal standard. The limits of detection (LOD) were 0.20, 0.10, 0.14 μg kg^?1 for 1,3-DCP, 2,3-DCP and 3-MCPD, respectively. The three compounds behaved >0.999 of linearity and satisfactory precision with the relative standard deviation (RSD) <10%. The excellent validation data suggested that this method was more effective than heptafluorobutyrylimidazole derivatization, and 1-trimethylsilylimidazole was considered as a promising silylating reagent to be widely applied to measurements of chloropropanols in real samples.     

Derivatization Method for Determination of Nitrosamines by GC�CMS

Gas chromatography/low-resolution mass spectrometry with electron impact source was applied to detect eight nitrosamines (NAs). NAs were first denitrosated by a mixed solution of hydrobromic and acetic acids, followed by sulfonylation with p-toluenesulfonyl chloride. Variables affecting the denitrosation and sulfonylation, such as temperature, time, pH and reagent concentration, were optimized. Comparison of the determination of NAs with and without derivatization was performed. Results showed that better chromatographic behavior and larger mass response were obtained after derivatization, and instrumental detection limits ranged from 0.016 to 0.053 ng, a nearly 20-fold decrease of those without derivatization. The proposed method provided an alternative to performing accurate qualitative and quantitative analysis of NAs with expensive high-resolution mass spectrometry or thermal energy analyzer.     

Simultaneous Derivatization and Dispersive Liquid–Liquid Microextraction for Fatty Acid GC Determination in Water

Simultaneous derivatization and dispersive liquid–liquid microextraction technique for gas chromatographic determination of fatty acids in water samples is presented. One hundred microlitre of ethanol:pyridine (4:1) were added to 4 mL aqueous sample. Then a solution containing 0.960 mL of acetone (disperser solvent), 10 μL of carbon tetrachloride (extraction solvent) and 30 μL of ethyl chloroformate (derivatization reagent) were rapidly injected into the aqueous sample. After centrifugation, 1 μL sedimented phase with the analytes was analyzed by gas chromatography. The effects of extraction solvent type, derivatization, extraction, and disperser solvents volume, extraction time were investigated. The calibration graphs were linear up to 10 mg L^?1 for azelaic acid (R ² = 0.998) and up to 1 mg L^?1 for palmitic and stearic acids (R ² = 0.997). The detection limits were 14.5, 0.67 and 1.06 μg L^?1 for azelaic, palmitic, and stearic acids, respectively. Repeatabilities of the results were acceptable with relative standard deviations (RSD) up to 13%. A possibility to apply the proposed method for fatty acids determination in tap, lake, sea, and river water was demonstrated.     

Determination of flurbiprofen in pharmaceutical preparations by GC–MS

This article describes a gas chromatography–mass spectrometry (GC–MS) method for the determination of flurbiprofen in pharmaceutical preparations. The method is based on the derivatization of flurbiprofen with N-methyl-N-(trimethylsilyl)trifluoroacetamide (MSTFA). For GC–MS, electron ionization mode (EI = 70 eV) and selected ion monitoring (SIM) mode were used for quantitative analysis (m/z 180 for flurbiprofen). Calibration curve was linear between the concentration range of 0.25–5.0 μg/mL. Intra- and inter-day precision values for flurbiprofen were less than 3.64, and accuracy (relative error) was better than 2.67%. The mean recovery of flurbiprofen was 99.4% for pharmaceutical preparations. The limits of detection and quantification of flurbiprofen were 0.05 and 0.15 μg/mL, respectively. No interference was found from tablet excipients at the selected assay conditions. Also, the method was applied for the quality control of five commercial flurbiprofen dosage forms to quantify the drug and to check the formulation content uniformity.     

Determination of steroid hormones in blood by GC–MS/MS

This paper presents the development, optimization and validation of a methodology to determine nine key steroid hormones (viz. pregnenolone, progesterone, dehydroepiandrosterone, androstenedione, testosterone, dihydrotestosterone, estrone, 17α-estradiol and 17β-estradiol) expressed in the steroidogenesis in biological fluids. The analytical method allows for the determination of steroid hormones in blood plasma and serum down to 0.08–0.16 ng/mL for estrogens, 0.20–0.36 ng/mL for androgens and 0.36–0.43 ng/mL for progestagens. These limits of detection were obtainable using a two-step solid-phase clean-up for fractionation and elimination of interfering lipids (fatty acids, phospholipids, glycerides and sterols) from the steroid hormones. The accuracy of the method was 50–112% in the range 0.10 to 2.00 ng/mL.     

Simultaneous Analysis of Lipid-Soluble Constituents of Erxian Decoction by GC–MS

Erxian Decoction (EXD), a traditional Chinese medicine formula mainly composed of six Chinese herbs, was originally developed for menopausal syndromes and had been practiced since the 1950s in China. Previous studies only focused on the water-soluble compounds involved in EXD by LC or TLC. This study analyzed the whole profile of the volatile constituents contained in EXD to supplement its quality evaluation method. Several EXD samples were extracted with chloroform and ethyl acetate, respectively, to get the lipid-soluble chloroform and ethyl acetate fractions and compared their gas chromatographic profiles by GC–MS. The EXD samples were hydrolyzed with hydrochloric acid in a water-bath at 100 °C, neutralized with 40% NaOH, and finally extracted with ethyl acetate and chloroform for the quantification of the total sarsasapogenins contained in EXD. A total of 56 compounds belonging to a variety of natural product categories such as aromatic phenols, terpenes, fatty acids, ketones, esters, and aldehydes, etc. were identified from the chloroform and ethyl acetate extracts by using the online EI–MS characterization. The GC–MS method showed a linear response for sarsasapogenin quantification with r = 0.994. The intra-day and inter-day variations of precision and accuracy of the assay were less than 5%. This developed GC–MS method could thus be successfully applied for the identification of lipid-soluble constituents derived from EXD, and also for the accurate quantification of the total sarsasapogenins contained in the acid hydrolyzed EXD samples.     

Simultaneous Determination of Tamsulosin and Dutasteride in Human Plasma by LC–MS–MS

A sensitive and selective liquid chromatographic tandem mass spectrometric (LC–MS–MS) method was developed for simultaneous identification and quantification of tamsulosin and dutasteride in human plasma, which was well applied to clinical study. The method was based on liquid–liquid extraction, followed by an LC procedure with a Gemini C-18, 50 mm × 2.0 mm (3 μm) column and using methanol:ammonium formate (97:3, v/v) as the mobile phase. Protonated ions formed by a turbo ionspray in positive mode were used to detect analytes and internal standard. MS–MS detection was by monitoring the fragmentation of 409.1 → 228.1 (m/z) for tamsulosin, 529.3 → 461.3 (m/z) for dutasteride and 373.2 → 305.3 (m/z) for finasteride (IS) on a triple quadrupole mass spectrometer. The lower limit of quantification for both tamsulosin and dutasteride was 1 ng mL^?1. The proposed method enables the unambiguous identification and quantification of tamsulosin and dutasteride for clinical drug monitoring.     

Simultaneous Determination of Atenolol and Chlorthalidone by LC–MS–MS in Human Plasma

A simple, sensitive, selective and rapid liquid chromatography–tandem mass spectrometry method was developed and validated for the simultaneous separation and quantitation of atenolol and chlorthalidone in human plasma using metoprolol and hydrochlorothiazide as internal standard. Following solid phase extraction, the analytes were separated by an isocratic mobile phase on a reversed-phase C₁₈ column and analyzed by MS in the multiple reaction-monitoring mode (atenolol in positive and chlorthalidone in the negative ion mode). The limit of quantitation for this method was 10 and 15 ng mL^?1 and the linear dynamic range was generally 10–2,050 ng mL^?1 and 15–3,035 ng mL^?1 for atenolol and chlorthalidone, respectively.     

New Procedure for the Determination of 3-Nitrotyrosine in Plasma by GC–ECD

A method suitable for the determination of 3-nitrotyrosine, a well known marker of nitro-oxidative stress, in plasma by GC–ECD has been investigated. After deproteinisation, SPE and LC separation, 3-nitrotyrosine was derivatised by a single-step procedure to the corresponding N-heptafluorobutyryl heptafluorobutyl ester and analysed. The precision and reliability of the procedure were assured by using 4-nitrophenylalanine as internal standard and a diverter valve to protect the detector. The method was applied to the analysis of volunteers’ plasma samples.     

LC–MS/MS Method for the Simultaneous Determination of Free Urinary Steroids

Cortisol homeostasis is implicated in hypertension and metabolic syndrome. Two enzymes modulate cortisol availability; 11β-hydroxysteroid dehydrogenase type 1 (11β-HSD1) preferentially converts inactive cortisone to cortisol, whereas 11β-hydroxysteroid dehydrogenase type 2 (11β-HSD2) converts cortisol to cortisone. In contrast, 5α and 5β reductases inactivate cortisol by conversion to its tetrahydrometabolites: tetrahydrocortisol, allo-tetrahydrocortisol and tetrahydrocortisone. A subtle local increase in cortisol can be detected by measuring 24-h urine metabolites, LC–MS/MS being the reference method. The 11β-HSD2 activity is assessed based on the cortisol/cortisone ratio, and the 11β-HSD1 activity on the (tetrahydrocortisol + allo-tetrahydrocortisol)/tetrahydrocortisone ratio. To better understand hypertension and/or metabolic syndrome pathogenesis a method for simultaneous determination of cortisol, cortisone, tetrahydrocortisol, allo-tetrahydrocortisol and tetrahydrocortisone was developed and validated in an LC coupled with the new detector AB Sciex QTrap^® 4500 tandem mass spectrometer. The steroids were extracted from 1 mL urine, using cortisol-D4 as internal standard. The quantification range was 0.1–120 ng/mL for cortisol and cortisone, and 1–120 ng/mL for tetrahydrometabolites, with >89 % recovery for all analytes. The coefficient of variation and accuracy was <10 %, and 85–105 %, respectively. Our LC–MS/MS method is accurate and reproducible in accordance with Food and Drug Administration guidelines, showing good sensitivity and recovery. This method allows the assessment of 11β-HSD2 and 11β-HSD1 activities in a single analytical run providing an innovative tool to explain etiology of misclassified essential hypertension and/or metabolic syndrome.     

Determination of Volatile Nitrosamines in Latex Products by HS-SPME–GC–MS

Nitrosamines which have been detected in various latex products are carcinogens. The method for determination of volatile nitrosamines in latex products was developed using a combination of headspace solid phase micro-extraction (HS-SPME) and gas chromatography–mass spectrometry (GC–MS). A carboxen/polydimethylsiloxane (CAR/PDMS) fiber was used for HS-SPME involving the following variables: (1) agitation conditions, (2) extraction temperature (3) extraction time, and (4) salt concentration. The instrument performances of three detection systems including GC combined thermal energy analyzer, nitrogen chemiluminescence detector and MS were evaluated. The agitation conditions including magnetic stirring and ultrasonication were investigated by the comparison of extraction efficiency of HS-SPME for nitrosamines. Obtained optimal detection conditions of nitrosamines were HS-SPME at 45 °C for 60 min assisted with magnetic stirring and saturated NaCl followed by GC–MS. To evaluate this method performance, the commercial products including eleven latex products (gloves, balloons and condoms) and four liquid silicone nipples were analyzed with the method. The results revealed that the method is suitable for simple and effective determination of nitrosamines in latex products. The advantage of this HS-SPME–GC–MS method is simple treatment, fast analysis, adequate sensitivity and without organic solvent.

     

Simultaneous Determination of 42 Pesticides and Herbicides in Chicken Eggs by UHPLC–MS/MS and GC–MS Using a QuEChERS-Based Procedure

A quick, easy, cheap, rugged, effective, and safe (QuEChERS)-based method has been validated for the extraction of 42 pesticides and herbicides including organophosphorus pesticides (OPPs), carbamate pesticides (CBs), herbicides (HBs), organochlorine pesticides (OCPs), and synthetic pyrethroid pesticides (PYRs) from chicken eggs. The QuEChERS-based extraction procedure was followed by cleanup steps using C18 and primary secondary amine sorbents. The supernatant was analyzed by ultra-high performance liquid chromatography–tandem mass spectrometry (UHPLC–MS/MS) and gas chromatography–mass spectrometry (GC–MS). The OPPs, CBs, and HBs were quantified by UHPLC–MS/MS, while the OCPs and PYRs were detected by GC–MS. The limits of quantification ranged from 0.01 to 8.5 μg kg⁻¹, and the analyte recoveries were in the range of 64.9–123.2 %. Furthermore, the repeatabilities (intra-day and inter-day) were good, and linear matrix-matched calibration curves were obtained. Acetochlor was identified in concentrations ranging from 0.27 to 0.44 μg kg⁻¹ in four samples from 80 chicken eggs. The method was successfully demonstrated for the fast and reliable analysis of pesticides and herbicides in chicken egg samples.

     

GC–MS Determination of Sucralose in Splenda

Sucralose (1,6-dichloro-1,6-dideoxy-β-d-fructofuranosyl-4-chloro-4-deoxy-α-d-galactopyranoside) is a high-intensity non-nutritive sweetener derived from sucrose. Determination of sucralose in food is important to ensure consistent product quality. The authors have developed a new method for determination of sucralose. The sucralose was converted into its trimethylsilyl (TMS) ether and qualitative and quantitative analysis were achieved by GC–MS and GC–FID, respectively, using myo-inositol ester as the internal standard. A good linear relationship between response and amount of sucralose TMS ether was obtained in the range 0.005–0.06 mg mL^?1 (r = 0.9994). The detection limit was 0.25 ng.     

GC–MS Determination of Atenolol Plasma Concentration after Derivatization with N-methyl-N-(trimethylsilyl)trifluoroacetamide

An analytical procedure was developed and validated for the determination of atenolol in human plasma. Atenolol and metoprolol (internal standard) were extracted from human plasma with a mixture of chloroform and butanol at basic pH. The extracts were derivatized with N-methyl-N-(trimethylsilyl)trifluoroacetamide and analyzed by GC–MS. Calibration curves were linear over the concentration range 15–250 ng mL^?1. Intra- and inter-day precision values for atenolol in human plasma were less than 7.4, and accuracy (relative error) was better than 6.4%. Recovery of atenolol from human plasma averaged 90.46%. The limits of detection (LOD) and quantitation (LOQ) of atenolol were 5.0 and 15 ng mL^?1. This method was successfully applied to six patients with hypertension who had been given an oral tablet of 50 mg atenolol.     

Improved Method for the Determination of Cyanuric Acid in Animal Feed by GC–MS

A specific and sensitive analytical method for the quantitative determination of cyanuric acid in animal feed was developed. Sample preparation involved the diethylamine/acetonitrile/water extraction of feed using sonication and shaking. The extract was subjected to clean-up by dual solid phase extraction using mixed mode anionic and cationic extraction cartridges. After removal of clean-up solvent, cyanuric acid was converted to a tert-butyldimethylsilyl derivative and was determined by gas chromatography–mass spectrometry in the selected ion monitoring mode. ¹³C ₃ ¹⁵ N₃-cyanuric acid was employed as the internal standard. The calibration curve was found to be linear up to 4 mg kg^?1. LOD and LOQ were determined to be 0.06 to 0.4 mg kg^?1 for fish and chicken feed. The mean recovery of cyanuric acid was 96 to 98% with relative pooled standard deviation of 1.8–7.4% in the range of 0.5 to 100 mg kg^?1 for fish and chicken feed. The validated method was applicable for analysing cyanuric acid in animal feed.     

Determination of Six Resorcylic Acid Lactones in Feed by GC–MS

A method was developed to simultaneously detect six resorcylic acid lactones in feed by GC–MS. Samples were extracted with methanol followed by a two step liquid–liquid extraction and an HLB SPE clean-up. The samples were derivatized with BSTFA + TMCS (99/1; v/v) and determined by GC–MS. For all analytes, the ranges of recoveries were 81.2–98.2%, with RSDs of 3.2–15.2%, and the LODs were 0.2–0.6 μg kg⁻¹.