Synthesis and NMR characterization of 6‐Phenyl‐6‐deoxy‐2,3‐di‐O‐methylcellulose

Cellulose ( 1 ) was converted for the first time to 6‐phenyl‐6‐deoxy‐2,3‐di‐O‐methylcellulose ( 6 ) in 33% overall yield. Intermediates in the five‐step conversion of 1 to­ 6 were: 6‐O‐tritylcellulose ( 2 ), 6‐O‐trityl‐2,3‐di‐O‐methylcellulose ( 3 ), 2,3‐di‐O‐methylcellulose ( 4 ); and 6‐bromo‐6‐deoxy‐2,3‐di‐O‐methylcellulose ( 5 ). Elemental and quantitative carbon‐13 analyses were concurrently used to verify and confirm the degrees of substitution in each new polymer. Gel permeation chromotography (GPC) data were generated to monitor the changes in molecular weight (DP_w) as the synthesis progressed, and the compound average decrease in cellulose DP_w was ～ 27%. Differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA) were used to characterize the decomposition of all polymers. The degradation temperatures ( °C) and percent char at 500 °C of cellulose derivatives 2 to 6 were 308.6 and 6.3%, 227.6 °C and 9.7%, 273.9 °C and 30.2%, 200.4 °C and 25.6%, and 207.2 °C and 27.0%, respectively. The glass transition temperature (T_g) of­6‐O‐tritylcellulose by dynamic mechanical analysis (DMA) occurred at 126.7 °C and the modulus (E′, Pa) dropped 8.9 fold in the transition from ?150 °C to + 180 °C (6.6 × 10⁹ to 7.4 × 10⁸ Pa). Modulus at 20 °C was 3.26 × 10⁹ Pa. Complete proton and carbon‐13 chemical shift assignments of the repeating unit of the title polymer were made by a combination of the HMQC and COSY NMR methods. Ultimate non‐destructive proof of carbon–carbon bond formation at C6 of the anhydroglucose moiety was established by generating correlations between resonances of CH₂6 (anhydroglucose) and C1′, H2′, and H6′ of the attached aryl ring using the heteronuclear multiple‐bond correlation (HMBC) method. In this study, we achieved three major objectives: (a) new methodologies for the chemical modification of cellulose were developed; (b) new cellulose derivatives were designed, prepared and characterized; (c) unequivocal structural proof for carbon–carbon bond formation with cellulose was derived non‐destructively by use of one‐ and two‐dimensional NMR methods. Copyright © 2002 John Wiley & Sons, Ltd.     

Layer‐by‐layer Assembled Multilayers of Graphene/Mono‐(6‐amino‐6‐deoxy)‐β‐cyclodextrin for Detection of Dopamine

Graphene/mono‐(6‐amino‐6‐deoxy)‐β‐cyclodextrin multilayer films composed of graphene sheet (GS) and mono‐(6‐amino‐6‐deoxy)‐β‐cyclodextrin (NH₂‐β‐CD) were fabricated easily by two steps. First, negatively charged graphene oxide (GO) and positively charged mono‐(6‐amino‐6‐deoxy)‐β‐cyclodextrin (NH₂‐β‐CD) were layer‐by‐layer (LBL) self‐assembled on glassy carbon electrode (GCE) modified with a layer of poly(diallyldimethylammonium chloride) (PDDA). Then graphene/mono‐(6‐amino‐6‐deoxy)‐β‐cyclodextrin (GS/NH₂‐β‐CD) multilayer films were built up by electrochemical reduction of graphene oxide/mono‐(6‐amino‐6‐deoxy)‐β‐cyclodextrin (GO/NH₂‐β‐CD). Combining the high surface area of GS and the active recognition sites on β‐cyclodextrin (β‐CD), the GS/NH₂‐β‐CD multilayer films show excellent electrochemical sensing performance for the detection of DA with an extraordinary broad linear range from 2.53 to 980.05 µmol·L^?1. This study offers a simple route to the controllable formation of graphene‐based electrochemical sensor for the detection of DA.     

The Stereoselective Total Synthesis of (6S)‐5,6‐Dihydro‐6‐[(2R)‐2‐hydroxy‐6‐phenylhexyl]‐2H‐pyran‐2‐one via Prins Cyclization

The stereoselective total synthesis of an antiproliferative and antifungal α‐pyrone natural product (6S)‐5,6‐dihydro‐6‐[(2R)‐2‐hydroxy‐6‐phenylhexyl]‐2H‐pyran‐2‐one is described. The key steps involved are the Prins cyclization, Mitsunobu reaction, and ring‐closing metathesis reaction.     

New Chiral Ligand N—Toluenesulfony1—2,2‘—dimethoxy—6,6’—di—aminobiphenyl for Catalytic Asymmetric Transfer Hydrogenation of Ketones

A new chiral ligand N‐p‐toluenesulfonyl‐2,2′‐dimethoxy‐6,6′‐diaminobiphenyl (Ts‐DMBDPPA) was prepared from 2,2′‐dimethoxy‐6,6′‐diaminobiphenyl via N‐tosylation. Its Ru(II) complex was effective catalysts for catalytic asymmetric transfer hydrogenation of aromatic ketones (with ee's up to 69.3%).     

Lithium‐Ionen‐Technologie und was danach kommen könnte

The efficient and effective storage of electrical energy with batteries is key for sustainable energy supply and emission free mobility. At present, lithium ion technology is the “best” high energy density battery and the first choice for use in electric vehicle applications, whereas for stationary storage of electricity a large number of battery technologies, including lithium ion batteries (LIB) , are in competition to each other. Even though the LIB is one step ahead of other battery technologies at the moment, this race is still open. Several new battery chemistries, such as lithium/sulfur, metal/air, sodium, magnesium and dual ion battery technologies are discussed as replacement or complementary technologies to lithium ion. The hope for improved and better battery technologies of the future is still high.     

Photocyclodimerization of 5‐Methyl‐2H‐pyran‐3(6H)‐one

The structures of the main products resulting from photocyclodimerization of the title compound 2 and of other 3‐methyl‐substituted ‘oxacyclohex‐2‐en‐1‐ones’ (=dihydropyranones) were determined by X‐ray crystallography. In connection, the ¹³C‐NMR chemical shifts of the cyclobutane C‐atoms of these dimers allow a clear differentiation between head‐to‐head and head‐to‐tail regioisomers, all structurally related to those of isophorone ( 1 ).     

A One‐Pot Biginelli Synthesis of 6‐Unsubstituted 5‐Aroylpyrimidin‐2(1H)‐ones and 6‐Acetyl‐1,2,4‐triazin‐3(2H)‐ones

The three‐component Biginelli‐like cyclocondensation reaction of enamines 1 , urea, and aldehydes in dioxane/acetic acid efficiently afforded the corresponding 6‐unsubstituted 3,4‐dihydropyrimidin‐2(1H)‐ones 2 in good yields (Scheme 1, Table). The corresponding reaction of azaenamine (=hydrazone) 7 with benzaldehyde and urea afforded 6‐acetyl‐1,2,4‐triazin‐3(2H)‐ones in good yields (Scheme 3).     

Fabrication of poly(2‐oxy‐6‐naphthoyl) particles by direct polycondensation of 2‐hydroxy‐6‐naphthoic acid

Morphology control of poly(2‐oxy‐6‐naphthoyl) (PON) was examined by using reaction‐induced crystallization of oligomers during direct polycondensation of 2‐hydroxy‐6‐naphthoic acid with p‐toluenesulfonyl chloride and N,N‐dimethylformamide in pyridine. PON particles were obtained of which the diameter was in the range of 8.0–8.3 µm. The particles were comprised of many lamellae and exhibited spherulitic morphology. They possessed high crystallinity evaluated from wide‐angle X‐ray scattering (WAXS). Formation mechanism of the particles was clarified from the results of morphology observation, yield, density and WAXS. When the number average degree of polymerization of the oligomers exceeded a critical value of ca. 4–5, they were precipitated to form lamellae. The lamellae grew to spherulites through screw dislocation with continuous precipitation of the oligomer from the solution. Finally, further polymerization occurred gradually in the precipitates. Copyright © 2005 John Wiley & Sons, Ltd.     

Stereoselective Total Synthesis of Iso‐Cladospolide B and the 12 Membered‐Macrolactone (6S,12R)‐6‐Hydroxy‐12‐methyloxacyclododecane‐2,5‐dione

Total syntheses of iso‐cladospolide B ( 1 ) and the 12‐membered macrolactone (6S,12R)‐6‐hydroxy‐12‐methyloxacyclododecane‐2,5‐dione ( 2 ), a non‐natural product, were achieved from a common intermediate starting from commercially available 1,9‐nonane diol.     

Crystallographic report: Thallium(18‐crown‐6) hexafluorophosphate, [Tl(18‐crown‐6)](PF6)

Thallium(18‐crown‐6) hexafluorophosphate was prepared and its structure was determined by X‐ray diffraction analysis. The Tl⁺ ion is surrounded by six oxygen atoms of 18‐crown‐6 and three fluorine atoms of , forming a sandwiched structure. If the three Tl–F interactions were considered significant, the coordination number in the title compound would be nine. Copyright © 2003 John Wiley & Sons, Ltd.     

Rigid diol bearing 6‐6‐6 fused ring system derived from naturally occurring myo‐inositol and its polyaddition with diisocyanates

Naturally occurring myo‐inositol was developed into a highly rigid diol by converting its 3,4‐ and 1,6‐vicinal diols in trans configuration into the corresponding butane‐2,3‐diacetals. The resulting diol bearing 6‐6‐6 fused ring system, in which conformational change is strictly suppressed, was combined with diisocyanates to perform polyadditions. The resulting polyurethanes were analyzed by differential scanning calorimetry, and it was found that their glass transition temperatures were much higher than those of the previously reported myo‐inositol‐derived polyurethanes, which were synthesized from a myo‐inositol‐derived diol bearing 5‐6‐5 fused ring system. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 3798–3803     

Synthesis of 6‐Alkylidene‐5,6‐dihydro‐4H‐1,3‐thiazine Derivatives via the Cyclization of N‐3‐Bromo‐3‐alkenylthioamides

By the treatment of N‐3‐bromo‐3‐alkenylthioamides with sodium hydroxide in DMF‐H₂O in the presence of tetra‐butylammonium bromide, series of 6‐alkylidene‐5,6‐dihydro‐4H‐1,3‐thiazine derivatives were prepared in moderate to good yields. The cyclization is supposed to proceed via both the intramolecular vinylic nucleophilic substitution and the elimination‐addition mechanisms (formation of acetylenic intermediates) in a competitive manner.     

An Oxidative Rearrangement of 6‐Phenylbicyclo[3.2.0]heptan‐6‐ol to 1,1′‐Biphenyl‐Carbaldehydes: A Mechanistic Study

Acid‐catalyzed rearrangement of 6‐phenylbicyclo[3.2.0]heptan‐6‐ol gave 1,1′‐biphenyl and 1,1′‐biphenyl‐carbaldehydes in small amounts as well as the expected rearrangement products. A detailed study of the reaction mechanism revealed that the conversion occurs via an oxidative process through the consecutive formation of cycloheptadienes, cycloheptatrienes, and 1,1′‐biphenyls. The acid‐catalyzed rearrangement of 6‐phenylbicyclo[3.2.0]hept‐2‐en‐6‐ols gave 1‐ and 2‐phenylcycloheptatrienes directly, from which 1,1′‐biphenyl and 1,1′‐biphenyl‐carbaldehydes were obtained by oxidation.     

Ultrasound‐Assisted Wittig Reaction: A Short,Efficient Synthesis of 2‐Methoxy‐6‐Alkyl‐1,4‐Benzoquinones

A short, efficient synthesis of 2‐methoxy‐6‐alkyl‐1,4‐benzoquinones is described. Ultrasound‐assisted Wittig reaction of alkyltriphenyl phosphonium bromides with o‐vanillin in basic aqueous conditions followed by reduction with Na/n‐BuOH gave 2‐methoxy‐6‐alkylphenols. Oxidation of 2‐methoxy‐6‐alkylphenols with Fremy's salt produced the title compounds.     

Synthesis and Cytotoxic Evaluation of Novel 1,2,3‐Triazole‐4‐Linked (2E,6E)‐2‐Benzylidene‐6‐(4‐nitrobenzylidene)cyclohexanones

This work describes the synthesis of novel 1,2,3‐triazole‐4‐linked (2E,6E)‐2‐benzylidene‐6‐(4‐nitrobenzylidene)cyclo‐hexanones starting from cyclohexanone. 1‐(Cyclohex‐1‐en‐1‐yl)piperidine, the enamine from cyclohexanone and piperidine, reacted with 4‐nitrobenzaldehyde to obtain 2‐(4‐nitrobenzylidene)cyclohexanone. Condensation of the latter compound with (prop‐2‐yn‐1‐yloxy)benzaldehyde derivatives under acidic conditions gave (4‐nitrobenzylidene)‐[(prop‐2‐yn‐1‐yloxy)‐benzylidene]cyclohexanones. Finally, ‘click reaction’ of these derivatives and various organic azides led to the title compounds. All compounds were examined by MTT assay for cytotoxic activity in one human breast cancer cell line, MDA‐MB‐231.