A comparative study of two polymorphs of bis(1‐hydroxy‐2‐methylpropan‐2‐aminium) carbonate

Alkanolamines have been known for their high CO₂ absorption for over 60 years and are used widely in the natural gas industry for reversible CO₂ capture. In an attempt to crystallize a salt of (RS)‐2‐(3‐benzoylphenyl)propionic acid with 2‐amino‐2‐methylpropan‐1‐ol, we obtained instead a polymorph (denoted polymorph II) of bis(1‐hydroxy‐2‐methylpropan‐2‐aminium) carbonate, 2C₄H₁₂NO⁺·CO₃²⁻, (I), suggesting that the amine group of the former compound captured CO₂ from the atmosphere forming the aminium carbonate salt. This new polymorph was characterized by single‐crystal X‐ray diffraction analysis at low temperature (100 K). The salt crystallizes in the monoclinic system (space group C2/c, Z = 4), while a previously reported form of the same salt (denoted polymorph I) crystallizes in the triclinic system (space group P, Z = 2) [Barzagli et al. (2012). ChemSusChem, 5 , 1724–1731]. The asymmetric unit of polymorph II contains one 1‐hydroxy‐2‐methylpropan‐2‐aminium cation and half a carbonate anion, located on a twofold axis, while the asymmetric unit of polymorph I contains two cations and one anion. These polymorphs exhibit similar structural features in their three‐dimensional packing. Indeed, similar layers of an alternating cation–anion–cation neutral structure are observed in their molecular arrangements. Within each layer, carbonate anions and 1‐hydroxy‐2‐methylpropan‐2‐aminium cations form planes bound to each other through N—H…O and O—H…O hydrogen bonds. In both polymorphs, the layers are linked to each other via van der Waals interactions and C—H…O contacts. In polymorph II, a highly directional C—H…O contact (C—H…O = 156°) shows as a hydrogen‐bonding interaction. Periodic theoretical density functional theory (DFT) calculations indicate that both polymorphs present very similar stabilities.     

Two new isostructural mercury(II) complexes involving the N‐heterocyclic 1‐[(benzotriazol‐1‐yl)methyl]‐1H‐1,3‐imidazole ligand: syntheses,structures and properties

The unsymmetrical N‐heterocyclic ligand 1‐[(benzotriazol‐1‐yl)methyl]‐1H‐1,3‐imidazole (bmi) has three potential N‐atom donors and can act in monodentate or bridging coordination modes in the construction of complexes. In addition, the bmi ligand can adopt different coordination conformations, resulting in complexes with different structures due to the presence of the flexible methylene spacer. Two new complexes, namely bis{1‐[(benzotriazol‐1‐yl)methyl]‐1H‐1,3‐imidazole‐κN ³}dibromidomercury(II), [HgBr₂(C₁₀H₉N₅)₂], and bis{1‐[(benzotriazol‐1‐yl)methyl]‐1H‐1,3‐imidazole‐κN ³}diiodidomercury(II), [HgI₂(C₁₀H₉N₅)₂], have been synthesized through the self‐assembly of bmi with HgBr₂ or HgI₂. Single‐crystal X‐ray diffraction shows that both complexes are mononuclear structures, in which the bmi ligands coordinate to the Hg^II ions in monodentate modes. In the solid state, both complexes display three‐dimensional networks formed by a combination of hydrogen bonds and π–π interactions. The IR spectra and PXRD patterns of both complexes have also been recorded.     

Synthesis,structure and cytotoxicity of new 2‐[(3‐aminopropyl)dimethylsilyl]‐5‐furfural diethylacetals and 2‐[(3‐aminopropyl)dimethylsilyl]‐5‐phenylfurans

Novel 2‐[(3‐aminopropyl)dimethylsilyl]‐5‐furfural diethylacetals and 2‐[(3‐aminopropyl)di‐methylsilyl]‐5‐phenylfurans have been synthesized by a hydrosilylation reaction of aliphatic and heterocyclic N‐allylamines in the presence of the Speier's catalyst. The effects of the structure of the amine and nature of organic substituent at the furan ring on the cytotoxicity of the new compounds have been studied. Copyright © 2013 John Wiley & Sons, Ltd.     

N,N,N‐Trimethyl‐5‐[(2,3,5,6‐tetrafluorophenoxy)carbonyl]pyridin‐2‐aminium trifluoromethanesulfonate a precursor for the synthesis of 2,3,5,6‐tetrafluorophenyl 6‐[18F]‐fluoronicotinate

The synthesis, recrystallization, and X‐ray deterimination of N,N,N‐trimethyl‐5‐[(2,3,5,6‐tetrafluorophenoxy)carbonyl]pyridin‐2‐aminium trifluoromethanesulfonate (PyTFP‐precursor), C₁₅H₁₃F₄N₂O₂⁺·CF₃SO₃⁻, is described. This triflate salt precursor is required for the synthesis of 2,3,5,6‐tetrafluorophenyl 6‐[¹⁸F]‐fluoronicotinate ([¹⁸F]FPyTFP), a prosthetic group used to radiolabel peptides for positron emission tomography (PET), as peptides are increasingly being used as PET‐imaging probes in nuclear medicine. Radiolabeling of peptides is typically done using a `prosthetic group', a small synthon to which the radioisotope is attached in the first step, followed by attachment to the peptide in the second step. During the synthesis of the PyTFP‐precursor, displacement of a Cl atom with trimethylamine gas and anion replacement with a triflate counter‐ion is critical, as incomplete replacement would hinder radioisotopic incorporation of nucleophilic fluorine‐18 and result in diminished radiochemical yields. The structural determination of the PyTFP‐precursor by X‐ray crystallography helped confirm the anion exchange of chloride with triflate.     

Indium(III) Chloride‐Catalyzed Conversion of {[(Benzyloxy)carbonyl]amino}‐Substituted Sulfones with 2‐[(Trimethylsilyl)oxy]furan: A Facile Access to γ‐Butenolactone Derivatives Containing a Protected Amino Group

Treatment of {[(benzyloxy)carbonyl]amino}‐substituted sulfones 1 with 2‐[(trimethylsilyl)oxy]furan ( 2 ) in the presence of InCl₃ as a catalyst at room temperature produced the γ‐butenolactone derivatives 3 and 4 containing a protected amino group (Scheme 1). The products were formed in high yields (81–92%) within 3–10 h favoring the anti‐isomer 3 .     

A Novel and Efficient Synthesis of 3‐[(4,5‐Dihydro‐1H‐pyrrol‐3‐yl)carbonyl]‐2H‐chromen‐2‐ones (=3‐[(4,5‐Dihydro‐1H‐pyrrol‐3‐yl)carbonyl]‐2H‐1‐benzopyran‐2‐ones)

An efficient one‐pot synthesis of 3‐[(4,5‐dihydro‐1H‐pyrrol‐3‐yl)carbonyl]‐2H‐chromen‐2‐one (=3‐[(4,5‐dihydro‐1H‐pyrrol‐3yl)carbonyl]‐2H‐1‐benzopyran‐2‐one) derivatives 4 by a four‐component reaction of a salicylaldehyde 1 , 4‐hydroxy‐6‐methyl‐2H‐pyran‐2‐one, a benzylamine 2 , and a diaroylacetylene (=1,4‐diarylbut‐2‐yne‐1,4‐dione) 3 in EtOH is reported. This new protocol has the advantages of high yields (Table), and convenient operation. The structures of these coumarin (=2H‐1‐benzopyran‐2‐one) derivatives, which are important compounds in organic chemistry, were confirmed spectroscopically (IR, ¹H‐ and ¹³C‐NMR, and EI‐MS) and by elemental analyses. A plausible mechanism for this reaction is proposed (Scheme 2).     

Polymerization of conjugated 5‐[(5‐ethynyl‐1‐naphthyl)ethynyl]‐N,N‐dimethylnaphthalen‐1‐amine with rhodium and palladium complexes

The monomer 5‐[(5‐ethynyl‐1‐naphthyl)ethynyl]‐N,N‐dimethylnaphthalen‐1‐amine was satisfactory obtained through the heterocoupling reaction of 5‐ethynyl‐N,N‐dimethylnaphthalen‐1‐amine and 4‐(5‐iodo‐1‐naphthyl)‐2‐methyl‐3‐butyn‐2‐ol catalyzed by a palladium–copper system, followed by acetone elimination. Poly{5‐[(5‐ethynyl‐1‐naphthyl)ethynyl]‐N,N‐dimethylnaphthalen‐1‐amine} was obtained through the reaction of the acetylene monomer with homogeneous rhodium and palladium catalyst complexes. The structure of the polymers always showed a trans–cisoidal chain configuration on the basis of IR and NMR spectra. Moreover, only for the rhodium catalyst complex in methanol was a dimeric product isolated in a very low yield, having a conjugated terminal ene–yne structure, which permitted the consideration of a metallated chain‐transfer intermediate in the polymer propagation. The mass determination of the polymers, by osmometry and gel permeation chromatography techniques, showed low average molecular weights. The kinetics of the catalyzed polymerization were analyzed. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 2038–2047, 2007     

Embryotoxicity studies of tri‐n‐butyltin(IV) complexes of 5‐[(E)‐2‐(aryl)‐1‐diazenyl]‐2‐hydroxybenzoic acid and 2‐[(E)‐2‐(3‐formyl‐4‐hydroxyphenyl)‐1‐diazenyl] benzoic acid on sea urchin development

The toxicity studies of free 5‐[(E)‐2‐(aryl)‐1‐diazenyl]‐2‐hydroxybenzoic acid and 2‐[(E)‐2‐(3‐formyl‐4‐hydroxyphenyl)‐1‐diazenyl]benzoic acid and their tri‐n‐butyltin(IV) complexes were evaluated by using sea urchin early developmental stages as recommended model organisms for toxicity tests. The novel complexes, as the parent tri‐n‐butyltin(IV) chloride (TBTCl), caused mitosis block and induced high embryonic mortality in sea urchin. Copyright © 2005 John Wiley & Sons, Ltd.     

Synthesis and characterization of near‐monodisperse electron acceptor homopolymers of 2‐[(3,5‐dinitrobenzoyl)oxy]ethyl methacrylate

Homopolymers of 2‐(trimethylsiloxy)ethyl methacrylate of degrees of polymerization from 5 to 50 were synthesized by group transfer polymerization in tetrahydrofuran (THF) using 1‐methoxy‐1‐(trimethylsiloxy)‐2‐methyl propene as the initiator and tetrabutylammonium bibenzoate as the catalyst. These polymers were first converted to poly[2‐(hydroxy)ethyl methacrylate]s by removal of the trimethylsilyl‐protecting groups by acidic hydrolysis, and subsequently transformed to poly{2‐[(3,5‐dinitrobenzoyl)oxy]ethyl methacrylate}s by reaction with 3,5‐dinitrobenzoyl chloride in the presence of triethylamine. Gel permeation chromatography in THF and proton nuclear magnetic resonance (¹H NMR) spectroscopy in CDCl₃ and d₆ dimethyl sulfoxide were used to characterize the polymers in terms of their molecular weight and composition. The molecular weights were found to be close to the values expected from the polymerization stoichiometry and the molecular weight distributions were narrow, with polydispersity indices around 1.1. The hydrolysis and reesterification steps were found to be almost quantitative for all polymers. Differential scanning calorimetry and thermal gravimetric analysis were also employed to measure the glass transition temperatures (T_g 's) and decomposition temperatures, which were determined to be approximately 80 and 320 °C, respectively. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 1457–1465, 2000     

A helical zinc(II) coordination polymer assembled from 1,3‐bis[(pyridin‐3‐yl)methoxy]benzene and benzene‐1,4‐dicarboxylic acid

In catena‐poly[[aqua[1,3‐bis(pyridine‐3‐ylmethoxy)benzene‐κN]zinc(II)]‐μ₂‐benzene‐1,4‐dicarboxylato‐κ²O¹:O⁴], [Zn(C₈H₄O₄)(C₁₈H₁₆N₂O₂)(H₂O)]_n, each Zn^II centre is tetrahedrally coordinated by two O atoms of bridging carboxylate groups from two benzene‐1,4‐dicarboxylate anions (denoted L²⁻), one O atom from a water molecule and one N atom from a 1,3‐bis[(pyridin‐3‐yl)methoxy]benzene ligand (denoted bpmb). (Aqua)O—H...N hydrogen‐bonding interactions induce the formation of one‐dimensional helical [Zn(L)(bpmb)(H₂O)]_n chains which are interlinked through (aqua)O—H...O hydrogen‐bonding interactions, producing two‐dimensional corrugated sheets.     

A new one‐dimensional ZnII coordination polymer based on 2‐[(1H‐imidazol‐1‐yl)methyl]‐1H‐benzimidazole and benzene‐1,2‐dicarboxylate

Multidentate N‐heterocyclic compounds form a variety of metal complexes with many intriguing structures and interesting properties. The title coordination polymer, catena‐poly[zinc(II)‐bis{μ‐2‐[(1H‐imidazol‐1‐yl)methyl]‐1H‐benzimidazole}‐κ²N³:N^3′;N^3′:N³‐zinc(II)‐bis(μ‐benzene‐1,2‐dicarboxylato)‐κ²O¹:O²;κ³O¹,O^1′:O²], [Zn₂(C₈H₄O₄)₂(C₁₁H₁₀N₄)₂]_n, has been synthesized by the reaction of Zn(NO₃)₂ with 2‐[(1H‐imidazol‐1‐yl)methyl]‐1H‐benzimidazole (imb) and benzene‐1,2‐dicarboxylic acid (H₂bdic) under hydrothermal conditions. There are two crystallographically distinct imb ligands [imb(A) and imb(B)] in the structure which adopt very similar coordination geometries. The imb(A) ligand bridges two symmetry‐related Zn1 ions, yielding a binuclear [(Zn1)₂{imb(A)}₂] unit, and the imb(B) ligand bridges two symmetry‐related Zn2 ions resulting in a binuclear [(Zn2)₂{imb(B)}₂] unit. The above‐mentioned binuclear units are further connected alternately by pairs of bridging bdic²⁻ ligands, forming an infinite one‐dimensional chain. These one‐dimensional chains are further connected through N—H...O hydrogen bonds, leading to a two‐dimensional layered structure. In addition, the title polymer exhibits good fluorescence properties in the solid state at room temperature.     

Well‐controlled radical copolymerization of styrene with 2‐[(perfluorononenyl)oxy] ethyl methacrylate and characterization of its copolymers

The atom transfer radical copolymerization of styrene with 2‐[(perfluorononenyl)oxy] ethyl methacrylate was performed in benzotrifluoride at 100 °C in the presence of 1‐bromoethyl benzene (1‐BrEB), cuprous bromide (CuBr), and α,α′‐bipyridine (bpy; [1‐BrEB]₀/[CuBr]₀/[bpy]₀ = 1/1/3). The experimental results demonstrate that this polymerization proceeded in a living fashion, producing fluorinated random copolymers with narrow polydispersities, controlled molecular weights, and desired unit ratios. The compositions of the copolymers were calculated from ¹H NMR spectra. The monomer reactivity ratios were obtained with the Skeist integral method. The copolymers were characterized by gel permeation chromatography, Fourier transform infrared, and differential scanning calorimetry. The solid surface characteristics of the copolymers were evaluated with contact‐angle measurements. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 2670–2676, 2001     

Molecular structures of 3‐[(2,2,3,3‐tetrafluoropropoxy)methyl]‐ and 3‐[(2,2,3,3,3‐pentafluoropropoxy)methyl]pyridinium saccharinates

The salts 3‐[(2,2,3,3‐tetrafluoropropoxy)methyl]pyridinium saccharinate, C₉H₁₀F₄NO⁺·C₇H₄NO₃S⁻, (1), and 3‐[(2,2,3,3,3‐pentafluoropropoxy)methyl]pyridinium saccharinate, C₉H₉F₅NO⁺·C₇H₄NO₃S⁻, (2), i.e. saccharinate (or 1,1‐dioxo‐1λ⁶,2‐benzothiazol‐3‐olate) salts of pyridinium with –CH₂OCH₂CF₂CF₂H and –CH₂OCH₂CF₂CF₃meta substituents, respectively, were investigated crystallographically in order to compare their fluorine‐related weak interactions in the solid state. Both salts demonstrate a stable synthon formed by the pyridinium cation and the saccharinate anion, in which a seven‐membered ring reveals a double hydrogen‐bonding pattern. The twist between the pyridinium plane and the saccharinate plane in (2) is 21.26 (8)° and that in (1) is 8.03 (6)°. Both salts also show stacks of alternating cation–anion π‐interactions. The layer distances, calculated from the centroid of the saccharinate plane to the neighbouring pyridinium planes, above and below, are 3.406 (2) and 3.517 (2) Å in (1), and 3.409 (3) and 3.458 (3) Å in (2).     

The six‐membered‐ring azomethine N‐((E)‐{5‐[(E)‐(pyridin‐3‐ylimino)methyl]thiophen‐2‐yl}methylidene)pyridin‐3‐amine

The title compound, C₁₆H₁₂N₄S, forms a three‐dimensional layered network structure via intermolecular hydrogen bonding and π‐stacking. The azomethine molecule adopts the thermodynamically stable E regioisomer and the pyridine substituents are antiperiplanar. The mean planes of the pyridine rings and the azomethine group to which they are connected are twisted by 27.27 (5) and 33.60 (5)°. The electrochemical energy gap of 2.3 eV based on the HOMO–LUMO energy difference is in agreement with the spectroscopically derived value.     

A new one‐dimensional CdII coordination polymer with a two‐dimensional layered structure incorporating 2‐[(1H‐imidazol‐1‐yl)methyl]‐1H‐benzimidazole and benzene‐1,2‐dicarboxylate ligands

The N‐heterocyclic ligand 2‐[(1H‐imidazol‐1‐yl)methyl]‐1H‐benzimidazole (imb) has a rich variety of coordination modes and can lead to polymers with intriguing structures and interesting properties. In the coordination polymer catena‐poly[[cadmium(II)‐bis[μ‐benzene‐1,2‐dicarboxylato‐κ⁴O¹,O^1′:O²,O^2′]‐cadmium(II)‐bis{μ‐2‐[(1H‐imidazol‐1‐yl)methyl]‐1H‐benzimidazole}‐κ²N²:N³;κ²N³:N²] dimethylformamide disolvate], {[Cd(C₈H₄O₄)(C₁₁H₁₀N₄)]·C₃H₇NO}_n, (I), each Cd^II ion exhibits an irregular octahedral CdO₄N₂ coordination geometry and is coordinated by four O atoms from two symmetry‐related benzene‐1,2‐dicarboxylate (1,2‐bdic²⁻) ligands and two N atoms from two symmetry‐related imb ligands. Two Cd^II ions are connected by two benzene‐1,2‐dicarboxylate ligands to generate a binuclear [Cd₂(1,2‐bdic)₂] unit. The binuclear units are further connected into a one‐dimensional chain by pairs of bridging imb ligands. These one‐dimensional chains are further connected through N—H…O hydrogen bonds and π–π interactions, leading to a two‐dimensional layered structure. The dimethylformamide solvent molecules are organized in dimeric pairs via weak interactions. In addition, the title polymer exhibits good fluorescence properties in the solid state at room temperature.     

Crystallographic report: Bis{4‐[N,N‐bis(2‐cyanoethyl)amino]pyridine} dichlorozinc(II)

In (C₁₁H₁₂N₄)₂ZnCl₂, the zinc(II) center is coordinated by the pyridine nitrogen atoms of two 4‐[N,N‐bis(2‐cyanoethyl)amino]pyridine ligands and two chlorine atoms in a tetrahedral geometry. Copyright © 2004 John Wiley & Sons, Ltd.     

Weak hydrogen and halogen bonding in 4‐[(2,2‐difluoroethoxy)methyl]pyridinium iodide and 4‐[(3‐chloro‐2,2,3,3‐tetrafluoropropoxy)methyl]pyridinium iodide

To enable a comparison between a C—H…X hydrogen bond and a halogen bond, the structures of two fluorous‐substituted pyridinium iodide salts have been determined. 4‐[(2,2‐Difluoroethoxy)methyl]pyridinium iodide, C₈H₁₀F₂NO⁺·I⁻, (1), has a –CH₂OCH₂CF₂H substituent at the para position of the pyridinium ring and 4‐[(3‐chloro‐2,2,3,3‐tetrafluoropropoxy)methyl]pyridinium iodide, C₉H₉ClF₄NO⁺·I⁻, (2), has a –CH₂OCH₂CF₂CF₂Cl substituent at the para position of the pyridinium ring. In salt (1), the iodide anion is involved in one N—H…I and three C—H…I hydrogen bonds, which, together with C—H…F hydrogen bonds, link the cations and anions into a three‐dimensional network. For salt (2), the iodide anion is involved in one N—H…I hydrogen bond, two C—H…I hydrogen bonds and one C—Cl…I halogen bond; additional C—H…F and C—F…F interactions link the cations and anions into a three‐dimensional arrangement.     

Solid‐State Characterization of 2‐[(2,6‐Dichlorophenyl)amino]‐Benzaldehyde: An Experimental and Theoretical Investigation

The solid‐state properties of 2‐[(2,6‐dichlorophenyl)amino]‐benzaldehyde (DCABA ) were investigated. Unlike its precursor diclofenac acid, for which three polymorphs are currently known, only one crystalline form of DCABA was found. It was further characterized by other spectroscopic and spectrometric methods including IR , Raman, and UV –vis spectroscopy and powder X‐ray diffraction (PXRD ). The thermal behavior of the crystalline form was studied by differential scanning calorimetry (DSC ). Theoretical studies, including Hirshfeld surface analysis and conformational energy searches, were performed to provide insight into the factors contributing to the stability of the crystal and to assess the possibility of additional polymorphs. The full characterization of this compound can help fast and accurate identification of DCABA both in dosage forms and in the environment.     

(E)‐3‐{4‐[(7‐Chloroquinolin‐4‐yl)oxy]‐3‐methoxyphenyl}‐1‐(4‐methylphenyl)prop‐2‐en‐1‐one: a ladder‐like structure resulting solely from π–π stacking interactions

In the title compound, C₂₆H₂₀ClNO₃, the quinoline fragment is nearly orthogonal to the adjacent aryl ring, while the rest of the molecular skeleton is close to being planar. The crystal structure contains no hydrogen bonds of any sort, but there are two π–π stacking interactions present. One, involving the quinoline ring, links molecules related by inversion, while the other, involving the two nonfused aryl rings, links molecules related by translation, so together forming a ladder‐type arrangement     

Counter‐anion role in the formation of two supramolecular complexes: [Ag2(DPP)2](ClO4)2·CH3CN and [Ag2(DPP)2(NO3)2] {DPP is N‐[(diphenylphosphanyl)methyl]pyridin‐4‐amine}

The title compounds, bis{μ‐N‐[(diphenylphosphanyl)methyl]pyridin‐4‐amine‐κ²N¹:P}disilver bis(perchlorate) acetonitrile monosolvate, [Ag₂(C₁₈H₁₇N₂P)₂](ClO₄)₂·CH₃CN, (1), and bis{μ‐N‐[(diphenylphosphanyl)methyl]pyridin‐4‐amine‐κ²N¹:P}bis[(nitrato‐κ²O,O)silver], [Ag₂(C₁₈H₁₇N₂P)₂(NO₃)₂], (2), each contain disilver macrocyclic [Ag₂(C₁₈H₁₇N₂P)₂]²⁺ cations lying about inversion centres. The cations are constructed by two N‐[(diphenylphosphanyl)methyl]pyridin‐4‐amine (DPP) ligands linking two Ag⁺ cations in a head‐to‐tail fashion. In (1), the unique Ag⁺ cation has a near‐linear coordination geometry consisting of one pyridine N atom and one P atom from two different DPP ligands. Two ClO₄⁻ anions doubly bridge two metallomacrocycles through Ag...O and N—H...O weak interactions to form a chain extending in the c direction. The half‐occupancy acetonitrile molecule lies with its methyl C atom on a twofold axis and makes a weak N...Ag contact. In (2), there are two independent [Ag(C₁₈H₁₇N₂P)]⁺ cations. The nitrate anions weakly chelate to each Ag⁺ cation, leading to each Ag⁺ cation having a distorted tetrahedral coordination geometry consisting of one pyridine N atom and one P atom from two different DPP ligands, and two chelating nitrate O atoms. Each dinuclear [Ag₂(C₁₈H₁₇N₂P)₂(NO₃)₂] molecule acts as a four‐node to bridge four adjacent equivalent molecules through N—H...O interactions, forming a two‐dimensional sheet parallel to the bc plane. Each sheet contains dinuclear molecules involving just Ag1 or Ag2 and these two types of sheet are stacked in an alternating fashion. The sheets containing Ag1 all lie near x = , , etc, while those containing Ag2 all lie near x = 0, 1, 2 etc. Thus, the two independent sheets are arranged in an alternating sequence at x = 0, , 1, etc. These two different supramolecular structures result from the different geometric conformations of the templating anions which direct the self‐assembly of the cations and anions.