Direct Fabrication of Nanodomes‐Combined Surface Relief Gratings on Azobenzene Polymer Films with Controlled Shapes and Sizes

In this study, we present nanodomes‐combined surface relief gratings (SRGs) of azopolymer films with controlled shapes and sizes. We investigate the effect of the polarization mode of light interference on leading nanodomes in the conventional SRG patterns. In addition, we also systematically study the relationship between Bragg distance of light interference and shapes of nanodomes. From this, we explain the anisotropic self‐assembled behavior nanodomes in photoaddressable azopolymer films regarding polarization modes as well as spatial confinement effect. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2019 , 57, 731–737     

One‐pot synthesis of polymer/inorganic hybrids: toward readily accessible,low‐loss,and highly tunable refractive index materials and patterns

The realization that modulated light pulses can be transported in a confined fashion over long distances within a structure that comprises a controlled spatial distribution of the refractive index n—as in optical fibres and waveguides—has, without doubt, underpinned the telecommunications revolution witnessed during the 20th century. The refractive index n, quantifying how light propagates in a given medium, as a consequence, has become one of the most important materials properties in designing photonics products. The other key characteristic for most optical and photonic applications is the amount of light that is absorbed by a material, expressed as the extinction coefficient κ. Although a range of organic/inorganic hybrid materials have been advanced with tunable refractive index, only a few systems combine a high n, sufficiently low κ and straightforward sample preparation to allow simple fabrication of highly transparent, low‐loss structures. Here, we present a hybrid material that can be readily produced in water via a one‐pot synthesis directly from commercially available, low‐cost precursors. Moreover, our hybrid material can be solution‐processed, yielding systems of an extinction coefficient <0.01, and a refractive index, which can be controlled to adopt values between 1.5 to at least 2.1. Unprecedentedly, simple post‐deposition procedures such as thermal annealing or irradiation with high‐intensity UV‐light allow adjusting n also after film fabrication, offering an exceptional degree of freedom in designing and tailoring also more complex photonic architectures or planar wave‐guides, for example, through creation of in‐plane refractive index patterns. As a proof‐of‐concept, we demonstrate fabrication of waveguides based on local heating. The versatility of our materials is further illustrated by the production of lenses and dielectric filters of ～100% reflectivity in a given wavelength regime. © 2011 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 000: 000–000, 2011     

Photosensitive Azopolymer Brushes via Atom Transfer Radical Polymerization for Protein Sensing

Novel photosensitive azopolymer brushes were synthesized via surface initiated atom transfer radical polymerization using initiator self‐assembled on Au surface. The chemical structures of azobenzene derivatives were confirmed by Fourier transform infrared spectroscopy (FTIR) and nuclear magnetic resonance spectroscopy (NMR). The surface morphology of azopolymers via atom transfer radical polymerization (ATRP) for different time was investigated by atomic force microscopy (AFM). Additionally, the photoisomerization of azopolymer was measured by ultraviolet‐visible spectroscopy (UV‐Vis). The results indicate that such azopolymers can undergo trans‐cis‐trans photoisomerization efficiently by photo‐irradiation with UV light. Furthermore, this photoisomerization property could also induce the reversible adsorption of bovine serum albumin (BSA) adsorption on azopolymer brush surfaces. This adsorption kinetics of the reversible process can be measured by surface plasmon resonance (SPR) spectroscopy in situ. It suggests that the protein biochips could be regenerated safely by UV irradiation rather than by being rinsed with chemical reagents.     

Apparent depth‐dependent modulus and hardness of polymers by nanoindentation: Investigation of surface detection error and pressure effects

Nanoindentation is a widely used technique to characterize the mechanical properties of polymeric materials at the nanoscale. Extreme surface stiffening has been reported for soft polymers such as poly(dimethylsiloxane) (PDMS) rubber. Our recent work [J. Polym. Sci. Part B Polym. Phys. 2017 , 55, 30–38] provided a quantitative model which demonstrates such extreme stiffening can be associated with experimental artifacts, for example, error in surface detection. In this work, we have further investigated the effect of surface detection error on the determination of mechanical properties by varying the sample modulus, instrument surface detection criterion, and probe geometry. We have examined materials having Young's moduli from ∼2 MPa (PDMS) to 3 GPa (polystyrene) using two different nanoindentation instruments (G200 and TI 950) which implement different surface detection methods. The results show that surface detection error can lead to apparent large stiffening. The errors are lower for the stiffer materials, but can still be significant if care is not taken to establish the range of the surface detection error in a particular experimental situation. We have also examined the effect of pressure beneath the probe on the nanoindentation‐determined modulus of polystyrene with different probe geometries. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2018 , 56, 414–428     

Fabrication and optical characterization of imprinted broad‐band photonic films via multiple gradient UV photopolymerization

A structured broad‐band photonic film is fabricated by a novel method using multiple gradient UV‐induced polymerization in the presence of cholesteric liquid crystals (CLCs). Here, imprinting and broadening of the reflection band of chiral nematic mesophase cells are achieved via controlled UV polymerization. The intensity gradient of UV light is modified by the distance between UV lamp and sample cell, which affects the polymerization rate and leads to the formation of imprinted helical constructions with different pitches. In this study, a comparison of new design process with traditional UV polymerization process is carried out. After seven cycles of gradient UV polymerization, the imprinted photonic construction exhibited a broadened reflection band and Bragg reflection, even for isotropic materials. Because of this, the reflection bandwidth showed a 70% improvement. Additionally, two stacked imprinted cells with different pitches can reflect incident light with a bandwidth over the visible wavelength range of 480–680 nm. A broad‐band photonic polymer film can be imprinted using multiple gradient UV photopolymerization in the presence of CLCs. Forming a UV intensity gradient and controlling the rate of photopolymerization are key factors in broadening the reflection band. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2017, 55, 1427–1434     

High‐throughput characterization of pattern formation in symmetric diblock copolymer films

Surface‐pattern formation in thin block copolymer films was investigated by utilizing a high‐throughput methodology to validate the combinatorial measurement approach and to demonstrate the value of the combinatorial method for scientific investigation. We constructed measurement libraries from images of subregions of block copolymer films having gradients in film thickness and a range of molecular mass, M. A single gradient film covers a wide range of film morphologies and contains information equivalent to a large number of measurements of films having a fixed thickness, h. Notably, the scale of the surface patterns is generally much larger than the molecular dimensions so that the interpretation of the patterns is more subtle than ordering in bulk block copolymer materials, and there is no predictive theory of this type of surface‐pattern formation. We observed a succession of surface patterns that repeat across the film with increasing h [extended smooth regions, regions containing circular islands, labyrinthine (“spinodal”) patterns, holes, and smooth regions again]. The extended smooth regions and the labyrinthine patterns appear to be novel features revealed by our combinatorial study, and these patterns occurred as bands of h that were quantized by integral multiples of the bulk lamellar period, L_o. The magnitude of the height gradient influenced the width of the bands, and the smooth regions occupied an increasing fraction of the film‐surface area with an increasing film gradient. The average size of the spinodal patterns, λ, was found to scale as λ ～ L or λ ～ M^?1.65 and reached a limiting size at long annealing times. The hole and island features had a size comparable to λ, and their size likewise decreased with increasing M. The smooth regions were attributed to an increase in the surface‐chain density in the outer brushlike block copolymer layer with increasing h, and the scaling of λ with M was interpreted in terms of the increasing surface elasticity with M. © 2001 John Wiley & Sons, Inc. J Polym Sci Part B: Polym Phys 39: 2141–2158, 2001     

Laser emission in a 3D nanoporous polymer replica of amorphous blue phase III

Wide‐temperature polymer stabilized cubic blue phases (BPI and BPII) facilitated the emergence of practically feasible band‐edge BP lasers. However, the mysterious “blue fog” amorphous BPIII always remained elusive in terms of its applicability to photonic devices due to its random amorphous structure devoid of photonic bandgaps and due to the difficulty in effectively identifying and stabilizing it for practical applications. We present the first photonic device based on amorphous BPIII by demonstrating that a three‐dimensional BPIII polymer scaffold or template, when infiltrated with liquid crystal and laser dye, forms a system where random lasing action is generated due to multiple scattering events occurring in the nanoporous and disordered polymer replica of BPIII. This study represents a facile approach for the development of photonic devices which favorably exploit unique polymer network morphologies for laser emission. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2018 , 56, 551–557     

RAFT‐based synthesis and the gelation property of telechelic polymers that can immobilize biomacromolecules

Telechelic polymers, macromolecules having two reactive end groups, can serve as building blocks for constructing polymers or polymeric materials that have complex architectures. Among the telechelic polymers, polymers bearing hydroxyl groups at two terminals have been used as components for preparation of functional materials. In the present study, RAFT polymerization of both N‐acryloylmorphorin and N‐succinimidyl acrylate by using a newly synthesized dithiobenzoate‐type chain transfer agent bearing hydroxyl groups at both terminals (HECPHD) was reported. After the acryloylation of the hydroxyl terminals of the obtained polymer, gelation was observed. Furthermore, the polymer could react with a protein via the conjugation of the succinimidyl esters‐containing polymers to the amino groups present on the protein surface. The results show that activated esters‐bearing polymers with hydroxyl groups at both terminals can be used as building blocks for constructing polymeric materials for an immobilization of biomacromolecules. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55 , 1356–1365     

Materials for the preparation of polymer pen lithography tip arrays and a comparison of their printing properties

Polymer Pen Lithography (PPL) uses an array of polymeric tips, typically composed of poly(dimethyl siloxane), to transfer ink onto a surface and create patterns of soft molecules with micrometer to nanometer feature dimensions. In this study, tip arrays were fabricated from poly(methyl methacrylate), poly([methyl methacrylate]‐co‐[butyl methacrylate]), and poly(3‐mercaptopropylmethylsiloxane), and used to pattern 1‐mercaptohexadecanoic acid onto Au surfaces to determine the fidelity of pattern transfer by PPL as a function of the mechanical properties of the materials. It was found that the dependence between the applied force and feature edge length correlates directly to the mechanical properties of each of the polymers used to fabricate the tip arrays, where stiffer polymers have a reduced dependence between the applied force and feature size. This study demonstrates that PPL tip arrays can be composed of a wide variety of materials whose choice is determined by the desired printing application. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Fabrication of Gold Nano‐Structures with Azopolymer Templates

Fabrication of gold nano‐patterns has been demonstrated employing surface relief structures created on films of an azobenzene‐functionalized polymer as templates. The surface relief templates were photoinscribed on the azopolymer films in one‐step with two laser beams. Thin layers of gold were over‐coated on the polymer templates by thermal evaporation. Gold lines of a few hundred nanometer width were successfully fabricated by pyrolyzing the azobenzene polymer. Sub‐micron gold dots were also created. The resulting gold structures exhibited the same periodicity as the polymer templates.     

Fluorinated comblike homopolymers: The effect of spacer lengths on surface properties

A series of polyacrylate monomers with F‐alkylalkyl [F(CF₂)_n(CH₂)_n′] side groups were prepared by free‐radical polymerization. The effect of the chemical structure on the surface properties of poly(ethylene terephthalate)s was evaluated by variations in the relative length of the fluorocarbon and hydrocarbon units in the side group. The resulting polymers were quite surface‐active in the solid state. The surface and bulk organization was investigated by X‐ray photoelectron spectroscopy analysis. A strong correlation between the bulk organization and surface properties of the polymers was established. The outmost layer, formed from trifluoromethyl groups and some ester functions, suggests that the side chain is arranged irregularly in the polymer–air interface. The length of the lateral chain governs this organization: long fluorinated chains and short hydrocarbon spacers are essential elements of the molecular design for such low‐surface‐energy materials. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 3737–3747, 2005     

Fabrication of fluorescent holographic micropatterns based on the rare earth complexes using azobenzene‐containing poly(aryl ether)s as macromolecular ligands

In this work, on the basis of photoinduced surface relief gratings (SRGs) with the rare earth complexes using azo‐polymers as macromolecular ligands, a series of novel materials for fabricating rewritable fluorescent two‐dimensional micropatterns, whose color can be easily adjusted by changing the species of the rare earth ions, are demonstrated. The rare earth complexes are prepared using a series of poly(aryl ether)s containing azobenzene chromophores and carboxyl group as macromolecular ligands and 1,10‐phenanthroline as co‐ligands. The fluorescence properties of the rare earth complexes and the influence of the contents of azobenzene chromophores on the fluorescent intensity are investigated by means of fluorescence excitation and emission spectroscopy. By exposing the films of the rare earth complexes to an interference pattern laser beam, SRGs can be formed on the films. Under the excitation, fluorescent patterns of the SRGs can be observed by the measurement of fluorescence microscopy. © 2015 Wiley Periodicals, Inc. J. Polym. Sci. Part A: Polym. Chem. 2015 , 53, 936–943     

High refractive index hyperbranched polyvinylsulfides for planar one‐dimensional all‐polymer photonic crystals

We report on the growth and characterization of one‐dimensional (1D) planar all‐polymer photonic crystals (PhC) with high dielectric contrast (Δn = 0.3) prepared by spin coating using hyperbranched polyvinylsulfide polymers (HB‐PVS) as high refractive index material and cellulose acetate as low refractive index material. Solution processable HB‐PVS show a near ultraviolet absorption inducing an increased refractive index in the visible‐near infrared (n = 1.68, λ = 1000 nm). HBPVS:Cellulose Acetate Distributed Bragg Reflectors show a very clear fingerprint of the photonic band gap possessing the expected polarized dispersion properties as a function of the incidence angle. Moreover, engineered microcavities tuned on the weak fluorescence spectrum of the HB‐PVS show directional fluorescence enhancement effects due to spectral redistribution of the emission oscillator strength. The combination of all these properties testifies the high optical quality of the obtained photonic structures thus indicating HB‐PVS as an interesting material for the preparation of such PhC. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2016 , 54, 73–80     

Surface engineering the cellular microenvironment via patterning and gradients

Cell organization, proliferation, and differentiation are impacted by diverse cues present in the cellular microenvironment. As a result, the surface of a material plays an important role in cellular function. Synthetic surfaces may be augmented by physical as well as chemical means. In particular, patterning and interfacial gradients may be utilized to mitigate the cellular response. Patterning is advantageous as it affords control over a range of feature sizes from several nanometers to millimeters. Gradients exist in vivo, for instance in stem cell niches, and the ability to create interfacial gradients in vitro can provide valuable insights into the influence of a series of minute surface changes on a single sample. This review focuses on fabrication methods for generating micro‐ and nanoscale surface patterns as well as interfacial gradients, the impact of these surface modifications on the cellular response, and the advantages and challenges of these surfaces in in vitro applications. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys., 2013     

Modulation of spontaneous emission characteristics of Alq3 in three‐dimensional PMMA photonic crystals

The effect of the photonic stop bands (PSBs) on the spontaneous emission from tris(8‐hydroxyquinolinato)aluminum (Alq3) doped in the beads of polymethylmethacrylate opal photonic crystals (PCs) is investigated in detail. The structure of PSBs in PCs has been analyzed. The steady emission data exhibits that the first‐ and second‐order PSB could effectively influence the spectral characteristics of Alq3 through changing the incident angles. The emission dynamic data is also investigated by using the Kohlrausch strengthened exponential model, which shows that the emission decay rate of Alq3 can be decelerated as the PSB of PC approaches the emission peak of Alq3. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2014 , 52, 842–847     

Patterning of spontaneous rolling thin polymer films for versatile microcapillaries

We investigate the spontaneous rolling of polydimethylsiloxane (PDMS) thin films and demonstrate the fabrication of capillaries with topographical and chemical patterns on the inner wall. Thin films of PDMS are either coated by a layer of hard material or have their surface hardened by plasma oxidation. They are then driven out of equilibrium by selective solvent swelling in vapor phase resulting in a tubular rolled‐up system. The inner diameter of those is measured as a function of layer thickness for different solvents and capping types. Those results are shown to be in good agreement with Timoshenko theory. Before rolling, the future inner surface can be characterized and functionalized. We demonstrate topographical and chemical patterning, respectively by embossing and microcontact printing. These methods are very simple and can easily produce cylindrical capillaries with inner diameter between 20 and some hundreds of microns with fully functionalized inner surface, overcoming many difficulties encountered in conventional soft lithography techniques. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2017 , 55, 721–728     

Preparation of polymer optical fibers doped with nonlinear optical active organic chromophores

We synthesized two novel organic nonlinear optical chromophores—chiral S(+)‐N‐[p‐(4‐nitrostyryl) phenyl] prolinol and non‐chiral [p‐(4‐nitrostyryl) phenyl] piperdine—as potential laser‐active dyes for photonic applications. Both materials show good optical transmittance in the telecommunication frequency region, desirable solubility in acrylic polymer optical fiber matrices, and attractive fluorescence properties that are advantageous for laser‐gain materials and devices. Subsequently, these two chromophores were incorporated into poly(methyl methacrylate) and poly(ethyl methacrylate) and drawn into polymer optical fibers. The relevant properties of these organic dye‐doped fibers have been studied, revealing essential attributes of laser‐active characteristics. © 2001 John Wiley & Sons, Inc. J Polym Sci Part B: Polym Phys 39: 1794–1801, 2001     

A soft lithography method to generate arrays of microstructures onto hydrogel surfaces

Materials bearing microscale patterns on the surface have important biomedical applications such as scaffolds in tissue engineering, drug delivery systems, sensors, and actuators. Hydrogels are an attractive class of materials that has excellent biocompatibility, biodegradability, and tunable mechanical properties that meet the requirements of the aforementioned applications. Generating patterns of intricate microstructures onto the hydrogel surfaces, however, is challenging due to properties such as the crosslinking density, low mechanical strength, adhesion, or chemical incompatibility of hydrogels with various molds. Here, we report the use of a soft lithography technique to successfully transfer arrays of micropillars onto a poly(2‐hydroxyethyl methacrylate)‐based hydrogel. The swelling of the hydrogel in solvents, such as phosphate‐buffered saline, deionized water, 60% ethanol, and absolute ethanol, facilitates the reproducible replication of the pattern. Furthermore, the micropillar pattern promotes the attachment of HeLa cells onto this hydrogel which is not inherently adhesive when unpatterned. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2018 , 56, 1144–1157     

Calculation of scattering-patterns of ordered nano- and mesoscale materials

Analytical expressions for the scattering patterns of ordered nano- and mesoscopic materials are derived and compared to measured scattering patterns. Ordered structures comprising spheres (fcc, bcc, hcp, sc, and bct), cylinders (hex and sq), lamellae (lam) and vesicles, as well as bicontinuous cubic structures (Ia3d, Pn3m, and Im3m) are considered. The expressions take into account unit cell dimensions, particle sizes and size distributions, lattice point deviations, finite domain sizes, orientational distributions, core/shell-structures as well a variety of peak shapes. The expressions allow to quantitatively describe, model and even fit measured SAXS and SANS-patterns of ordered or oriented micellar solutions, lyotropic phases, block copolymers, colloidal solutions, nanocomposites, photonic crystals, as well as mesoporous materials.