Synthesis, characterization and photoluminescence of tin oxide nanoribbons and nanowires

In this work we report the successful formation of tin oxide nanowires and tin oxide nanoribbons with high yield and by using simple cheap method. We also report the formation of curved nanoribbon, wedge-like tin oxide nanowires and star-like nanowires. The growth mechanism of these structures has been studied. Scanning electron microscope was used in the analysis and the EDX analysis showed that our samples is purely Sn and O with ratio 1:2. X-ray analysis was also used in the characterization of the tin oxide nanowire and showed the high crystallinity of our nanowires. The mechanism of the growth of our1D nanostructures is closely related to the vapor–liquid–solid (VLS) process. The photoluminescence PL measurements for the tin oxide nanowires indicated that there are three stable emission peaks centered at wavelengths 630, 565 and 395 nm. The nature of the transition may be attributed to nanocrystals inside the nanobelts or to Sn or O vacancies occurring during the growth which can induce trapped states in the band gap.     

Preparation and luminescence study of Eu(III) titanate nanotubes and nanowires using carbon nanotubes as removable templates

Eu(III) titanate nanotubes and nanowires have been successfully synthesized by solvothermal method using carbon nanotubes (CNTs) as removable templates. The products were characterized by X-ray diffraction spectroscopy, transmission electron microscopy, energy-dispersive X-ray spectrometry, thermogravimetric and differential thermal analysis. It is demonstrated that CNTs are fully coated with an amorphous Eu₂(TiO₃)₃ layer, which is about 10 nm thick and almost continuous and uniform. After the Eu₂(TiO₃)₃/CNTs composites have been calcined at various temperatures, Eu₂(TiO₃)₃ nanotubes and nanowires are obtained by removing the CNTs templates. The diameter of the Eu₂(TiO₃)₃ nanotubes is 40–60 nm, which is consistent with that of CNTs. Both nanotubes and nanowires have a narrow distribution of diameters. The fluorescence properties of the Eu₂(TiO₃)₃ nanotubes and nanowires calcined at various temperatures have been investigated. The results indicate that when the Eu₂(TiO₃)₃/CNTs composites were calcined at 700 °C for 5 h, the Eu₂(TiO₃)₃ nanotubes obtained can be effectively excited by 395 nm light, and exhibit strong red emission around 616 nm. It is very interesting to discover that a few residual carbons doped in Eu₂(TiO₃)₃ nanotubes and many oxygen vacancies could promote the intensity of red emission peak of Eu³⁺ ions. In addition, Eu₂(TiO₃)₃ nanowires calcined at 900 °C for 5 h also have a strong red emission peak due to many oxygen vacancies and defects formed on the surface of the nanowires and inside them.     

Preparation of few-layer graphene-capped boron nanowires and their field emission properties

Large-area boron nanowire(BNW) films were fabricated on the Si(111) substrate by chemical vapor deposition(CVD). The average diameter of the BNWs is about 20 nm, with lengths of 5–10 μm. Then, graphene-capped boron nanowires(GC-BNWs) were obtained by microwave plasma chemical vapor deposition(MPCVD). Characterization by scanning electron microscopy indicates that few-layer graphene covers the surface of the boron nanowires. Field emission measurements of the BNWs and GC-BNW films show that the GC-BNW films have a lower turn-on electric field than the BNW films.     

Synthesis and characterization of PbS nanorods and nanowires

 A surfactant assisted solvotermal approach for the controllable synthesis of PbS nanowires and nanorods is applied. The synthesis is based on decomposition of lead thiocyanate in boiling benzyl alcohol with Cetyl trimethyl ammonium bromide used as a surfactant. Nanowires of PbS (about 2–3 μm with an average diameter of 30–50 nm) and nanorods (200–300 nm in length with an axial ratio of 4–5) were synthesised. The nanostructures were characterized by high resolution transmission electron microscopy (HR-TEM), scanning electron microscopy (SEM), selected area electron diffraction (SAED) and X-ray diffraction analysis. The experimental results indicate that the reaction duration and concentration of surfactant play key roles in determining the final morphologies of PbS blocks building and also in their crystallinity. A possible mechanism for creation of PbS nanowires and nanorods is discussed.     

Photocatalytic characterization of silica coated titania nanoparticles with tunable coatings

Photocatalytic experiments were conducted using the silica coated titania nanoparticles with tunable coatings to photocatalytically degrade methyl orange in water solutions. When the silica loading on titania nanoparticles was 4.67 wt%, the silica coating layer was incomplete and the photocatalytic activity of coated nanoparticles was higher than titania nanoparticles. However, when the silica loading on titania nanoparticles increased to 9.33 wt%, the thickness of silica coatings was 1.5 nm and the photocatalytic activity of coated nanoparticles sharply decreased. When the silica loading on titania nanoparticles increased to 25.19 wt%, the coated nanoparticles still exhibited a certain photacatalytic activity due to the porosity of silica coatings. The change of the effective tiania surface area available for methyl orange caused by silica coatings and the dispersion stability were used to explain the difference in photocatalytic activity.This revised version was published online in August 2005 with a corrected issue number.     

Observation of carbon‐facilitated phase transformation of titanium dioxide forming mixed‐phase titania by confocal Raman microscopy

Confocal Raman microscopy, a relatively new and advanced technique, is found to be suitable for imaging the chemical morphology below the submicrometer scale. It has been employed to probe the phase transformation of carbon‐containing titania (TiO₂) nanopowder and titania thin film subjected to laser annealing. The observation of phase transformation from the anatase phase to the rutile phase at high laser power annealing is attributed to carbon inclusion inside or on the surface of titania. Upon annealing, carbon could react with the oxygen of titania and create oxygen vacancies favoring the transformation from the anatase to the rutile phase. This study provides evidence for the carbon‐assisted phase transformation for creating carbon‐containing mixed‐phase titanium dioxide by laser annealing. We explicitly focus on the presence of carbon in the phase transformation of TiO₂ using confocal Raman microscopy. In all of the investigated samples, mixed anatase/rutile phases with carbon specifically was found at the rutile site. X‐ray diffraction (XRD), scanning electron microscopy (SEM) and energy‐dispersive spectroscopy (EDS) studies have been performed in addition to Raman mapping to verify the mixed‐phase titania formation. Copyright © 2010 John Wiley & Sons, Ltd.     

Synthesis and electrical characterization of tungsten oxide nanowires

Tungsten oxide nanowires of diameters ranging from 7 to 200~nm are prepared on a tungsten rod substrate by using the chemical vapour deposition (CVD) method with vapour--solid (VS) mechanism. Tin powders are used to control oxygen concentration in the furnace, thereby assisting the growth of the tungsten oxide nanowires. The grown tungsten oxide nanowires are determined to be of crystalline W₁₈O₄₉. I--V curves are measured by an \textit{in situ} transmission electron microscope (TEM) to investigate the electrical properties of the nanowires. All of the I--V curves observed are symmetric, which reveals that the tungsten oxide nanowires are semiconducting. Quantitative analyses of the experimental I--V curves by using a metal--semiconductor--metal (MSM) model give some intrinsic parameters of the tungsten oxide nanowires, such as the carrier concentration, the carrier mobility and the conductivity.     

Preparation of silica nanowires using porous silicon as Si source

This very paper is focusing on the preparation of silica nano-wires via annealing porous silicon wafer at 1200 °C in H₂ atmosphere and without the assistant metal catalysts. X-ray diffraction, X-ray energy dispersion spectroscopy, scanning electron microscopy, high-resolution transmission electron microscopy and selected area diffraction technology have been employed for characterizing the structures, the morphology and the chemical components of the nano-wires prepared, respectively. It is found that the diameter and the length of the nano-wires were about 100 nm and tens micron, respectively. Meanwhile, it is also necessary to be pointed out that silica NWs only formed in the cracks of porous wafers, where the stress induced both by the electro-chemical etching procedure for the porous silicon preparation and nanowires growth procedure is believed to be lower than that at the center of the island. Therefore, a stress-driven mechanism for the NWs growth model is proposed to explain these findings.     

Preparation and characterization of oriented silica nanowires

Large-scale of oriented closely packed silica nanowire bunches have been synthesized by using large size (1-10 μm in diameter), low melting point tin droplets as catalyst on silicon wafers at 980 °C. Scanning electron microscopy (SEM) and transmission electron microscopy (TEM) analyses show that the amorphous silica nanowires have lengths of 50-100 μm and diameters of 100-200 nm. Unlike any previous observed results using high melting point metal (such as gold and iron) as catalyst, the Sn catalyst growth exhibits many interesting phenomena. Each Sn ball can simultaneously catalyze the growth of many silica nanowires, which is quite different from the conventional vapor-liquid-solid process.     

TiO_2晶型及其相变的高温拉曼光谱研究

本文测量了锐钛矿型和金红石型TiO2常温至1923K的高温拉曼光谱,观察了锐钛矿型TiO2在1373K～1473K间发生相变,不可逆转化为金红石型TiO2,分析了特征峰随温度变化的规律以及两种结构相的温度依赖性。并为不同晶型TiO2的研究、生产和应用提供重要的实验依据。     

Growth and mechanism of titania nanowires

Anatase and rutile-phase titania nanowires have been prepared via an efficient molten salt-assisted and novel pyrolysis route, respectively. The growth of anatase nanowires is parallel to [010] direction. The anatase titanium oxide nanowires are obtained by exchange reaction between Na₂TiO₃ and HCl, whereas the formation of rutile titania nanowires is conventional vapor-liquid-solid growth mechanism.     

有机-ZnO纳米线混合光电二极管特性

采用水热法制备了1维ZnO纳米线,并通过改变ZnO纳米线的取向（横向和竖直）和不同的P型半导体材料,制备了不同的有机-ZnO纳米线混合光电二极管。通过改变光照与非光照的条件下并在光照条件下改变光电二极管与光源的距离,对所制备的光电二极管的相关特性进行研究。结果表明：采用水热技术能够制备高质量的ZnO纳米线;当光电二极管两端通正向电压时,光照时的电流大于非光照时的电流,当通反向电压时,结果则相反;同时,光电流还与光照强度有关,光照强度越大,光电流越大。     

有机-ZnO纳米线混合光电二极管特性

采用水热法制备了1维ZnO纳米线,并通过改变ZnO纳米线的取向（横向和竖直）和不同的P型半导体材料,制备了不同的有机-ZnO纳米线混合光电二极管。通过改变光照与非光照的条件下并在光照条件下改变光电二极管与光源的距离,对所制备的光电二极管的相关特性进行研究。结果表明:采用水热技术能够制备高质量的ZnO纳米线;当光电二极管两端通正向电压时,光照时的电流大于非光照时的电流,当通反向电压时,结果则相反;同时,光电流还与光照强度有关,光照强度越大,光电流越大。     

Electronic structures and optical properties of TiO2:Improved density-functional-theory investigation

TiO2 has been recently used to realize high-temperature ferromagnetic semiconductors.In fact,it has been widely used for a long time as white pigment and sunscreen because of its whiteness,high refractive index,and excellent optical properties.However,its electronic structures and the related properties have not been satisfactorily understood.Here,we use Tran and Blaha＇s modified Becke-Johnson（TB-mBJ） exchange potential（plus a local density approximation correlation potential） within the density functional theory to investigate electronic structures and optical properties of rutile and anatase TiO2.Our comparative calculations show that the energy gaps obtained from mBJ method agree better with the experimental results than that obtained from local density approximation（LDA） and generalized gradient approximation（GGA）,in contrast with substantially overestimated values from many-body perturbation（GW） calculations.As for optical dielectric functions（both real and imaginary parts）,refractive index,and extinction coefficients as functions of photon energy,our mBJ calculated results are in excellent agreement with the experimental curves.Our further analysis reveals that these excellent improvements are achieved because mBJ potential describes accurately the energy levels of Ti 3d states.These results should be helpful to understand the high temperature ferromagnetism in doped TiO2.This approach can be used as a standard to understand electronic structures and the related properties of such materials as TiO2.     

Electronic structures and optical properties of TiO₂:Improved density-functional-theory investigation

TiO2 has been recently used to realize high-temperature ferromagnetic semiconductors.In fact,it has been widely used for a long time as white pigment and sunscreen because of its whiteness,high refractive index,and excellent optical properties.However,its electronic structures and the related properties have not been satisfactorily understood.Here,we use Tran and Blaha’s modified Becke-Johnson(TB-mBJ) exchange potential(plus a local density approximation correlation potential) within the density functional theory to investigate electronic structures and optical properties of rutile and anatase TiO2.Our comparative calculations show that the energy gaps obtained from mBJ method agree better with the experimental results than that obtained from local density approximation(LDA) and generalized gradient approximation(GGA),in contrast with substantially overestimated values from many-body perturbation(GW) calculations.As for optical dielectric functions(both real and imaginary parts),refractive index,and extinction coefficients as functions of photon energy,our mBJ calculated results are in excellent agreement with the experimental curves.Our further analysis reveals that these excellent improvements are achieved because mBJ potential describes accurately the energy levels of Ti 3d states.These results should be helpful to understand the high temperature ferromagnetism in doped TiO2.This approach can be used as a standard to understand electronic structures and the related properties of such materials as TiO2.     

镍锰铁氧体纳米线阵列的制备与表征

采用真空负压灌注技术, 结合溶胶-凝胶法在多孔氧化铝模板的纳米孔洞中成功制备了平均直径为80 nm左右的Ni_{1- x}Mn_xFe₂O₄(x=0, 0.25, 0.5, 0.75) 纳米线阵列. XRD结果显示所制备的纳米线阵列为立方尖晶石结构, SEM和TEM的结果表明纳米线是由大量不同晶体取向的亚微晶粒联接组成. 磁测量结果显示, 随着Mn掺杂浓度的增加, 饱和磁化强度先增加而后减小, 这种变化与离子在尖晶石结构中的替代、占位变化有关. 相比于块体材料的NiFe₂O₄, 由于非线性磁结构比例的增加, 导致了线体NiFe₂O₄的饱和磁化强度降低.     

基于涂覆石墨烯的三根电介质纳米线的THz波导的模式特性分析

研究了一种基于涂覆石墨烯的三根电介质纳米线的THz波导,采用多极方法对这种波导所支持的5种低阶模的有效折射率的实部和传播长度进行了解析分析.结果表明,通过改变工作频率、中间纳米线半径、纳米线之间的间距以及石墨烯的费米能,可以有效地调节波导的模式特性.当工作频率从30 THz增加到40 THz时,这些模式的有效折射率的实部增大,传播长度减小,并且在变化的过程中会出现交叉现象.当中间纳米线的半径从25 nm增加到75 nm时,除了模式3和模式4基本不受影响,其他模式有效折射率的实部增大,传播长度变化各不相同.当纳米线之间的间距从10 nm增加到50 nm时,除了模式3和模式4基本不受影响,其他模式有效折射率的实部减小,传播长度增大,并且在变化的过程中会出现交叉现象.当石墨烯的费米能从0.4 eV增加到1.2 eV时,有效折射率的实部减小,传播长度增大.计算表明,多极法得到的结果与有限元方法得到的结果完全一致.本研究可以为基于涂覆石墨烯的电介质纳米线的THz波导的设计、制作和应用提供理论基础.     

Preparation and characterization of CdS/Si coaxial nanowires

CdS/Si coaxial nanowires were fabricated via a simple one-step thermal evaporation of CdS powder in mass scale. Their crystallinities, general morphologies and detailed microstructures were characterized by using X-ray diffraction, scanning electron microscope, transmission electron microscope and Raman spectra. The CdS core crystallizes in a hexagonal wurtzite structure with lattice constants of a=0.4140 nm and c=0.6719 nm, and the Si shell is amorphous. Five Raman peaks from the CdS core were observed. They are 1LO at 305 cm⁻¹, 2LO at 601 cm⁻¹, A₁-TO at 212 cm⁻¹, E₁-TO at 234 cm⁻¹, and E₂ at 252 cm⁻¹. Photoluminescence measurements show that the nanowires have two emission bands around 510 and 590 nm, which originate from the intrinsic transitions of CdS cores and the amorphous Si shells, respectively.     

Preparation and characterization of carbon nanotubes encapsulated GaN nanowires

A novel two-step catalytic reaction is developed to synthesize gallium nitride nanowires encapsulated inside carbon nanotubes (GaN@CNT). The nanowires are prepared from the reaction of gallium metal and ammonium using metals or metal alloys as a catalyst. After the formation of the nanowires, carbon nanotubes are subsequently grown along the nanowires by chemical vapor deposition of methane. The structural and optical properties of pure GaN nanowires and GaN@CNT are characterized using scanning electron microscopy, transmission electron microscopy, X-ray diffraction, energy dispersive X-ray spectroscopy and Raman spectroscopy. The results show that GaN nanowires are indeed encapsulated inside carbon nanotubes. The field emission studies show that the turn-on field of GaN@CNT is higher than that of carbon nanotubes, but substantially lower than that of pure GaN nanowires. This work provides a wide route toward the preparation and applications of new one-dimensional semiconductor nanostructures.     

微流控技术制备ZnO纳米线阵列及其气敏特性

利用微流控技术在微通道中制备了Zn O纳米线阵列,通过X射线衍射和扫描电子显微镜分别对纳米线的物相和表面形貌进行了表征.结果发现,合成的Zn O纳米线具有良好的c轴择优取向性和结晶度.同时,对Zn O纳米线阵列在丙酮、甲醇和乙醇气体中的气敏特性进行了研究,测试结果表明:在最佳工作温度(475?C)下,纳米线阵列对200 ppm(1 ppm=10-6)丙酮气体的最大灵敏度可达8.26,响应恢复时间分别为9和5 s;通过与传统水热法制备的Zn O纳米线的气敏性能相比较发现,基于微流控技术制备的纳米线阵列具有更高的灵敏度和更快的响应恢复速度.最后,从材料表面氧气分子得失电子的角度对Zn O纳米线气敏机理进行了讨论.