FTIR studies of CO adsorption on Rh-Ge/Al2O3 catalysts prepared by surface redox reactions

A series of bimetallic Al2O3-supported Rh-Ge catalysts was prepared by surface redox reactions under controlled hydrogen atmosphere. The surface properties of these catalysts were probed via in-situ FTIR spectroscopic studies of adsorbed CO and were compared to those of monometallic Rh catalysts that had undergone similar treatments. The results indicate that Ge addition results in the formation and stabilization of smaller rhodium ensembles at the expense of larger Rh0 surfaces. A charge-transfer mechanism from Ge to Rh is also inferred by the IR results for the high Ge loading samples. Air exposure of the catalysts leads to an irreversible segregation of the two metals and formation of large Rh crystallites.     

A study of thoria on the surface of gamma-Al2O3

The dispersion of thoria on the surface of gamma-Al2O3 and the surface properties of ThO2/gamma-Al2O3 samples, as well as the influence of the loading amount of thoria on the reduction behavior of copper oxide species, have been studied using XRD, XPS, FTIR, and TPR. The results indicate that the dispersion capacity of thoria, like that of ceria, is much lower than for two other tetravalent metal oxides, zirconia and titania, and the surface adsorption amount of the carbonyl compound and H2O slightly increases with increasing thoria loading. The different thoria loadings can influence the reduction behavior of the dispersed copper oxide by comparing the TPR results of CuO/ThO2/gamma-Al2O3 samples. In addition, the lower dispersion capacities of thoria and ceria on gamma-Al2O3 are tentatively discussed by considering the structural stability of the two oxides.     

FTIR studies of CO adsorption on Al2O3- and SiO2-supported Ru catalysts

The adsorption of CO on Al2O3- and SiO2-supported Ru catalysts has been investigated through FTIR spectroscopy. Deconvolution of the spectra obtained reveals the presence of 11 distinct bands in the case of Ru/Al2O3 and 10 bands in the case of Ru/SiO2, which were assigned to different carbonyl species adsorbed on reduced as well as partially oxidized Ru sites. Although most of these bands on both supports are similar, they exhibit substantial differences in terms of stability. In general, the analogous CO species on Ru/Al2O3 are adsorbed stronger than those on Ru/SiO2, with the most stable species observed being a dicarbonyl adsorbed on metallic Ru (i.e., Ru0(CO)2). Following sintering of the Ru, the ratio of multicarbonyl to monocarbonyl adsorption is reduced substantially because of the lack of isolated sites or small Ru clusters that enable the formation of multicarbonyl species via oxidative disruption. Finally, in the presence of O2, the main features observed correspond to monocarbonyl, dicarbonyl, and tricarbonyl species adsorbed on partially oxidized Run+. The intensities of all bands decrease drastically at temperatures above 210 degrees C because of the onset of CO oxidation, which results in substantially reduced surface coverage.     

Density functional theoretical calculations for a Co2/gamma-Al2O3 model catalyst: structures of the gamma-Al2O3 bulk and surface and attachment sites for Co2+ ions

First-principle density functional theory (DFT) calculations on the electronic state and structure of a [Co2+]2/gamma-Al2O3 model catalyst have been performed in relation to catalysis for unique NO-CO reactions on a Co2+ ensemble/gamma-Al2O3 catalyst. The DFT calculations reveal that a bulk structure of gamma-Al2O3 is energetically most favorable when aluminum vacancies are evenly dispersed at octahedral sites, and that the (110) plane is exposed as a top-most layer by its neutrality. Two Co2+ ions on the (110) surface are supported adjacently to each other in a tetrahedral symmetry. The calculations also demonstrate that the vacant d orbitals of the two Co2+ ions are directed toward each other, which brings about an adsorbate-adsorbate interaction between two molecules which adsorb on each of the Co2+ ions. This may be an origin of the unique aspect of Co2+ ensemble/gamma-Al2O3 catalysis.     

Adsorption and protonation of CO2 on partially hydroxylated gamma-Al2O3 surfaces: a density functional theory study

Adsorption and protonation of CO2 on the (110) and (100) surfaces of gamma-Al2O3 have been studied using density functional theory slab calculations. On the dry (110) and (100) surfaces, the O-Al bridge sites were found to be energetically favorable for CO2 adsorption. The adsorbed CO2 was bound in a bidentate configuration across the O-Al bridge sites, forming a carbonate species. The strongest binding with an adsorption energy of 0.80 eV occurs at the O3c-Al5c bridge site of the (100) surface. Dissociation of water across the O-Al bridge sites resulted in partially hydroxylated surfaces, and the dissociation is energetically favorable on both surfaces. Water dissociation on the (110) surface has a barrier of 0.42 eV, but the same process on the (100) surface has no barrier with respect to the isolated water molecule. On the partially hydroxylated gamma-Al2O3 surfaces, a bicarbonate species was formed by protonating the carbonate species with the protons from neighboring hydroxyl groups. The energy difference between the bicarbonate species and the coadsorbed bidentate carbonate species and hydroxyls is only 0.04 eV on the (110) surface, but the difference reaches 0.97 eV on the (100) surface. The activation barrier for forming the bicarbonate species on the (100) surface, 0.42 eV, is also lower than that on the (110) surface (0.53 eV).     

Pure component spectral analysis of surface adsorbed species measured under real conditions. BTEM-DRIFTS study of CO and NO reaction over a Pd/gamma-Al2O3 catalyst

The adsorption of NO and CO was studied on an alumina-supported palladium catalyst by in situ diffuse reflectance infrared spectroscopy (DRIFTS). The temperature range was 50-160 degrees C and a wide variety of partial pressures was used. The band-target entropy minimization (BTEM) algorithm was applied to the DRIFTS data sets resulting in the pure component spectra of numerous species adsorbed on both the Pd (primarily a variety of Pd-CO and Pd-NO species, in various oxidation states and coordinations) and alumina surface species (i.e. nitrates, nitrites, carbonates, bicarbonates, formates, and isocyanates) as well as gas phase species. Twenty seven previously known species were identified as well as three new and previously unreported or previously unassigned spectra. The present study indicates that BTEM can be meaningfully applied to Pd/Al2O3 DRIFTS in order to provide enhanced spectroscopic analysis. Moreover, the present results are compared in detail with the recent BTEM analysis of CO and NO adsorption on Pt/Al2O3 using DRIFTS (Phys. Chem. Chem. Phys. 2008, 10, 3535).     

Spectral reconstruction of surface adsorbed species using band-target entropy minimization. Application to CO and NO reaction over a Pt/gamma-Al2O3 catalyst using in situ DRIFT spectroscopy

The adsorption of NO and CO was studied on an alumina-supported platinum catalyst by in situ diffuse reflectance infrared Fourier-transform spectroscopy (DRIFTS). The temperature range was 50-160 degrees C and a wide variety of partial pressures was used. The band-target entropy minimization (BTEM) algorithm was applied to the DRIFTS data sets resulting in the pure component spectra of numerous species adsorbed on both the Pt (primarily a variety of Pt0-CO and Pt2+ -CO species) and alumina surface (i.e. nitrates, nitrites, bicarbonates, isocyanates) as well as gas-phase species. Thirty-one previously known species were identified as well as 6 new and previously unreported or previously unassigned spectra. The present results indicate that BTEM analysis of DRIFTS data is a very promising tool for the study of heterogeneous catalytic in situ spectroscopic data.     

O2-coverage-dependent CO oxidation on reduced TiO2(110): A first principles study

First principles periodic slab calculations based on gradient-corrected density functional theory have been performed to investigate CO oxidation on rutile TiO2(110) at varying O2 coverages (theta = 1, 2, and 3, where theta is defined as the number of O2 per oxygen vacancy). For each coverage we only present the reaction of CO with oxygen species in the most stable configuration. Our results show a significant variation in the oxidation activation energy with O2 coverage.     

Some peculiarities in the specific adsorption of phosphate ions on hematite and gamma-Al2O3 as reflected by radiotracer studies

The specific adsorption of radiolabeled phosphate ions from perchlorate supporting electrolyte onto gamma-Al2O3 and hematite powder has been investigated. The pH dependence of the adsorption of phosphate species was compared with that of sulfate ions. It was demonstrated that in contrast to the behavior of sulfate ions the pH dependence of phosphate ions goes through a maximum. On the other hand, it was found that the reversible adsorption of phosphate ions is accompanied by the formation of strongly chemisorbed species. Results obtained from a study of the competitive adsorption of sulfate and phosphate ions at various pH values are reported and interpreted. An attempt is made to correlate the experimental findings with the models for anion adsorption reported in the literature.     

Rapid monitoring of the nature and interconversion of supported catalyst phases and of their influence upon performance: CO oxidation to CO2 by gamma-Al2O3 supported Rh catalysts

Spatially and temporally resolved energy-dispersive EXAFS (EDE) has been utilised in situ to study supported Rh nanoparticles during CO oxidation by O2 under plug-flow conditions. Three distinct phases of Rh supported upon Al2O3 were identified by using EDE at the Rh K-edge during CO oxidation. Their presence and interconversion are related to the efficiency of the catalysts in oxidising CO to CO2. A metallic phase is only found at higher temperatures (>450 K) and CO fractions (CO/O2 > 1); an oxidic phase resembling Rh2O3 dominates the active catalyst under oxygen-rich conditions. Below about 573 K, and in CO-rich environments, high proportions of isolated Rh(I)(CO)2 species are found to co-exist with metallic Rh nanoparticles. Alongside these discrete situations a large proportion of the active phase space comprises small Rh cores surrounded by layers of active oxide. Confinement of Rh to nanoscale domains induces structural lability that influences catalytic behaviour. For CO oxidation over Rh/Al2O3 there are two redox phase equilibria alongside the chemistry of CO and O adsorbed upon extended Rh surfaces.     

Aberration-corrected STEM imaging of Ag on gamma-Al2O3.

Ag on gamma-alumina is a promising catalyst for hydrocarbon selective catalytic reduction in lean-burn gasoline and diesel engines for transportation applications. Although much is known about the mechanism of NOx reduction and the various intermediates, little agreement exists on the nature of the active silver species. In the present work, aberration-corrected STEM has provided new information about the nature of Ag on alumina both as impregnated and following treatments at various temperatures with exposure to simulated exhaust gas. Ex situ techniques have provided new insights into the evolution of Ag on alumina following exposure to temperature and simulated exhaust gas.     

Characterization of Pd-Cu alloy nanoparticles on gamma-Al2O3-supported catalysts

Cu-Pd/Al2O3 bimetallic catalysts have been characterized by XRD, TEM, and EDX techniques. The surface structure has been investigated by FT-IR spectroscopy of low-temperature adsorbed CO in the reduced and in the oxidized state. Evidence has been provided of the formation of Cu-Pd alloy nanoparticles, both of the alpha-phase (disordered fcc) and of the beta-phase (ordered CsCl-type). IR spectra suggest that Cu likely decorates the edges while Pd mostly stays at the main faces. Part of copper disperses as Cu+ on the support even after reduction. The presence of copper seems to modify strongly the sate of oxidized Pd centers in oxidized high-Pd content materials. The redox chemistry of the system, where Pd is reduced more easily than Cu, appears to be very complex.     

Anion specific adsorption on Fe2O3 and AlOOH nanoparticles in aqueous solutions: comparison with hematite and gamma-Al2O3

The specific adsorption of radiolabeled sulfate and phosphate ions from perchlorate supporting electrolyte onto nano-AlOOH and nano-Fe(2)O(3) powder has been investigated. The pH dependence of the adsorption of anions onto nanopowders was compared with that of the same ions onto gamma-Al(2)O(3) and hematite. It was demonstrated that the character of the pH dependence of the adsorption is very similar in the comparable cases. It was found, however, that in contrast to the behavior of gamma-Al(2)O(3), nano-AlOOH dissolves at a significant rate at low pH values (pH<2). Thus the study of the pH dependence of the anion adsorption encounters difficulties at these pH values. Disregarding this fact, it can be concluded that no special effects can be observed in the anion adsorption onto the nano-oxides studied.     

Structure of CO2 adsorbed on the KCl(100) surface

The structure and dynamics of the adsorbate CO(2)/KCl(100) from a diluted phase to a saturated monolayer have been investigated with He atom scattering (HAS), low-energy electron diffraction (LEED), and polarization dependent infrared spectroscopy (PIRS). Two adsorbate phases with different CO(2) coverage have been found. The low-coverage phase is disordered at temperatures near 80 K and becomes at least partially ordered at lower temperatures, characterized by a (2√2×√2)R45° diffraction pattern. The saturated 2D phase has a high long-range order and exhibits (6√2×√2)R45° symmetry. Its isosteric heat of adsorption is 26 ± 4 kJ mol(-1). According to PIRS, the molecules are oriented nearly parallel to the surface, the average tilt angle in the saturated monolayer phase is 10° with respect to the surface plane. For both phases, structure models are proposed by means of potential calculations. For the saturated monolayer phase, a striped herringbone structure with 12 inequivalent molecules is deduced. The simulation of infrared spectra based on the proposed structures and the vibrational exciton approach gives reasonable agreement between experimental and simulated infrared spectra.     

Computational studies on polymer adhesion at the surface of gamma-Al2O3. I. The adsorption of adhesive component molecules from the gas phase

We calculate the minimum energy paths and reaction energies of the adsorption of the epoxide adhesive components diglycidylesterbisphenol A (DGEBA), diethyltriamine (DETA), and the adhesion promoter 3-aminopropylmethoxysilane (AMEO) at two different sites on a model of the native Al2O3 surface, using the nudged elastic band algorithm in conjunction with self-consistent charge-density functional based tight binding. Our results show that the chosen combination of methods is well suited to obtain an overview of the reaction mechanisms and kinetics of the adsorption of organic molecules on inorganic surfaces. The obtained MEP-s show that there is preference for the adsorption of the adhesion promoter, AMEO, over the resin, DGEBA, while the adsorption of the curing agent, DETA, is unfavorable. Our approach also gives an insight into the ranges of the mechanical and electronic influences of the adsorption process on the interface, which neither full ab initio methods nor force field approaches can provide. These results will help to develop a quantum mechanics-molecular mechanics multiscale embedding scheme for more detailed studies of organic/inorganic hybrid interface reactions.     

A study on the stability of O2 on oxometalloporphyrins by the first principles calculations

The authors investigated the interaction of oxometalloporphyrins (MO(por))--specifically, MoO(por), WO(por), TiO(por), VO(por), and CrO(por)--with O(2) by using first principles calculations. MoO(por) and WO(por) undergo reactions with O(2); on the other hand, TiO(por), VO(por), and CrO(por) do not. Next, they compared the interaction of MoO(por) and WO(por) with O(2). Activation barriers for the reactions of MoO(por) and WO(por) with a side-on O(2) are small. For MoO(por)(O(2)), the activation barrier for the reverse reaction that liberates O(2) is also small; however, that for WO(por)(O(2)) is large. The experimental results that photoirradiation with visible light or heating of Mo (VI)O(tmp)(O(2)) regenerates Mo (VI)O(tmp) by liberating O(2) while W (VI)O(tmp)(O(2)) does not [J. Tachibana, T. Imamura, and Y. Sasaki, Bull. Chem. Soc. Jpn. 71, 363 (1998)] are explained by the difference in activation barriers of the reverse reactions. This means that bonds formed between the W atom and O(2) are stronger than those between the Mo atom and O(2). The bond strengths can be explained by differences in the energy levels between the highest occupied molecular orbital of MoO(por) and WO(por), which are mainly formed from the a orbitals of the central metal atom and pi(*) orbitals of O(2).     

The adsorption of CO2, H2CO3, HCO3− and CO32− on Cu2O (111) surface: First‐principles study

The adsorption of CO₂, and its derivatives, H₂CO₃, HCO, and CO, on Cu₂O (111) surface has been investigated by first‐principles calculations based on the density functional theory at B3LYP hybrid functional level. The Cu₂O (111) surface has been modeled using an embedded cluster method,in which the quantum clusters plus some ab initio ion model potentials were inserted in an array of point charges. On the surface, H₂CO₃ was dissociated into an H⁺ and an HCO ion. Among the CO₂ species, HCO was the only activated species on the surface. The results suggest that the reduction of CO₂ on Cu₂O (111) surface can start from the form of HCO. © 2011 Wiley Periodicals, Inc. Int J Quantum Chem, 2011     

FTIR spectroscopy combined with isotope labeling and quantum chemical calculations to investigate adsorbed bicarbonate formation following reaction of carbon dioxide with surface hydroxyl groups on Fe2O3 and Al2O3

FTIR spectroscopy combined with isotope labeling experiments and quantum chemical calculations is used to investigate the adsorption of carbon dioxide on hydroxylated metal oxide surfaces. In particular, transmission FTIR spectra following CO2 adsorption on hydroxylated nanoparticulate Fe2O3, alpha-Al2O3, and gamma-Al2O3 particles at 296 K are reported. As expected, reaction of CO2 with these surfaces results in the formation of adsorbed bicarbonate and carbonate. In this study, the vibrational spectrum of the bicarbonate product is analyzed in detail through the use of isotope labeling experiments and quantum chemical calculations. The experimental and calculated vibrational frequencies of adsorbed HC16O3-, DC16O3-, HC18O3-, HC16O18O2-, and HC18O16O2- indicate that bicarbonate bonds to the surface in a bridged structure. There is some evidence from the mixed isotope experiments that following initial nucleophilic attack of OH, the formation of the final bicarbonate structure involves a proton transfer. On the basis of energetic considerations, the proton transfer mechanism most likely occurs through an intermolecular process involving either coadsorbed hydroxyl groups and/or carbonate.     

Inhibition of CO oxidation on RuO2(110) by adsorbed H2O molecules

Catalytic CO oxidation on the RuO(2)(110) surface was studied at 300 K by scanning tunneling microscopy (STM), high-resolution electron-energy-loss spectroscopy (HREELS), and thermal desorption spectroscopy (TDS). Upon repeatedly exposing the surface to several 10 L of CO and O(2) at 300 K, STM shows that unreactive features accumulate with each CO and O(2) titration run. HREELS and TDS show formation of increasing amounts of H(2)O, retarded formation of O-cus atoms and incomplete removal of CO-bridge molecules during O(2) dosing, and a changing ratio of single- and double-bonded CO-bridge molecules. It is concluded that H(2)O (presumably from the residual gas) is accumulating at the Ru-cus sites thus blocking them, so that the dissociative adsorption of oxygen is prevented and the CO oxidation reaction is suppressed. Some 10% CO- bridge remains on the surface even during oxygen exposure. Consistent with this interpretation, deactivation of the surface is suppressed at 350 K, at the onset of H(2)O desorption.