Voltammetry with a Fluoride-Selective Electrode with Solid-Phase Reference System

Experimental results obtained in a study of the voltammetric response of an all-solid fluoride-selective electrode based on LaF₃ (Eu²⁺ 0.8 mol %), LaF₃ (Sr²⁺ 5 mol %) and CeF₃ (Sr²⁺ 5 mol %) single crystals brought in contact with Ag, Bi, and Sn metal samples are presented. The method of cathodic inversion voltammetry was applied to study the reduction of La³⁺ and Ce³⁺-cations from the rigid sublattice of solid electrolytes, which determines the threshold of the electrochemical stability of a membrane. Anodic inversion voltammetry was used to investigate the characteristics of solid-phase generation of metal fluorides at the interface between the fluoride-selective electrode and metals.     

Enzymatic detection of glucose using fluoride-selective electrodes with polymeric membranes

The feasibility of using polymeric membrane fluoride-selective electrodes based on zirconium(IV) 5,10,15,20-tetraphenylporphyrin as a detector in a flow-injection analysis (FIA) system for glucose determination was examined. The optimization of enzymatic reactions, FIA system configuration and enzyme-immobilization process was performed. It was shown that the resulting flow-injection system exhibits good working parameters, such as reproducibility, linear range of glucose concentration (3 × 10⁻³–10⁻¹ M), sampling rate (60 samples per minute) and lifetime (over 1 month). The performance of the polymeric membrane electrode was similar to that of a crystalline LaF₃ electrode. The results of glucose determination in synthetic samples with the proposed system show good agreement with real glucose concentrations.     

Effect of the Electrode Material on the Reduction of La<Superscript>3+</Superscript> and Ce<Superscript>3+</Superscript> in Fluoride-Conducting Solid Electrolytes

The reduction of immobile cations La³⁺ and Ce³⁺ in fluoride-conducting solid electrolytes (FSE) LaF₃ (Eu²⁺ 0.8 mol %), LaF₃ (Sr²⁺ 5 mol %), and CeF₃ (Sr²⁺ 5 mol %) in contact with Ag, Bi, Si, La, Ce, and Sm working electrodes is studied by chronoamperometry and voltammetry with linear potential scan. Discovered is linear dependence of initial segments of potentiostatic transients of cathodic current on t ^1/2 at FSE interfaces with Ag, Bi, La, Ce, and Sm. The dependence is due to diffusion-controlled instantaneous nucleation of Ln and Ce. The La³⁺ and Ce³⁺ reduction at the FSE/Ag interface is reversible in a narrow region. The reduction and oxidation of La³⁺ and Ce³⁺ (cations of the FSE rigid lattice) at the FSE/Me (Me = La, Ce and Sm, Bi, Si) interface is irreversible and involves a chemical reaction.__________Translated from Elektrokhimiya, Vol. 41, No. 5, 2005, pp. 662–672.Original Russian Text Copyright © 2005 by Turaeva, Kot, Urchukova, Murin.     

An improved selective fluoride electrode

The major cause of failure for an Orion Research 9409A fluoride-selective electrode observed in routine use in our laboratory is loss of contact with the LaF₃ crystal. Opening the electrode and replacing the electrolyte restores electrodes that suffer from this effect.     

Synthesis of highly fluorescent LaF3:Ln/LaF3 core/shell nanocrystals by a surfactant-free aqueous solution route

A surfactant-free aqueous solution route has been established for the synthesis of LaF₃:Ln³⁺/LaF₃ core/shell nanocrystals (Ln=Ce, Tb, Nd) heated at 75 °C at ambient pressure. All the as-prepared nanocrystals with spherical shape have an average size around 20 nm, and consist of well crystallized hexagonal phases. The X-ray photoelectron spectra was used to confirm that the LaF₃ shells have coated the LaF₃:Ce³⁺, Tb³⁺ cores. Compared with that of the original cores under the same conditions, the emission intensity of the LaF₃:Ce³⁺, Tb³⁺/LaF₃ and LaF₃:Nd³⁺/LaF₃ core/shell nanocrystals increased significantly of 120% and 60%, respectively. The quantum yield of the LaF₃:Ce³⁺, Tb³⁺/LaF₃ core/shell nanocrystals reached about 27% in aqueous solution. These results indicate that a significant reduction of the quenching from the surface of the core nanocrystals can be obtained by the synthesis of the core/shell structures, and this method can provide more desirable lanthanide-doped nanocrystals for potential biological applications.     

Effect of the electrode material on the oxygen reduction at the nonstoichiometric lanthanum fluoride/electrode interface

The voltammetry method with a linear potential scan is used for investigating the effect the electrode material (Ni, Co, electrodes on the basis of cobalt oxides modified with carbon) exerts on the reduction of gaseous oxygen at interfaces solid fluoride-conducting electrode LaF₃:Eu²⁺/electrode, O₂, and conjugated processes. Properties of the modified electrodes are characterized by the impedance spectroscopy, scanning electron microscopy, and x-ray photoelectron spectroscopy methods. The oxygen reaction is irreversible at the LaF₃:Eu²⁺|Ni (or Co) interfaces. At the interface of LaF₃:Eu²⁺ with modified electrodes Co (C n at %), where n = 5 and 9, mobile forms of oxygen are reversible and the reduction of gaseous and chemisorbed oxygen is controlled by diffusion with different effective kinetic parameters.     

Influence of alkaline earth oxides on thermal stability of oxyfluoride glass

A new type of glass from the Na₂O–MeO–Al₂O₃–SiO₂–LaF₃ system where MeO = MgO, CaO, BaO and SrO has been studied. The aim of the investigation was to determine, by means of thermal techniques (DTA and DSC), the influence of alkaline earth ions additions on its thermal stability and the ability of LaF₃ phase to crystallization. The effect of LaF₃ crystallization was analyzed in connection with glass composition expressed by the Al₂O₃/(MeO + Na₂O + 3La₂F₆) ratio varying from 0.4 to 0.8 for the alkaline earth admixtures. The compositions of the glasses have been designed so as to make it possible to define the effect of the charge of the ion modifiers (Na⁺, Me²⁺, La³⁺) on the alumina position in the framework of the glass. Two series of glasses were obtained with a different F⁻ content. The formation of LaF₃ depends directly on the strength of the network and can be control by the Al₂O₃/modifiers ratio as well as the content of fluorine ions. Generally, it can be stated that transparent glass-ceramic with nanocrystallization of LaF₃ can be obtained for Al₂O₃/(Na₂O + MeO + 3La₂F₆) ≤0.6 in the examined glasses. The more the ionicity of the alkaline earth ions the greater the tendency for the crystallization of Me₂LaF₇ and MeF₂. In the glass structure the substitution of oxygen ions by F⁻ ions facilitated the crystallization of LaF₃. Simultaneously, it influenced the thermal stability of the aluminosilicate network and induced the crystallization of appropriate silicates during the heat treatment.     

Electrochemical Behavior of the LaF3:Eu2+/Me Interface (Me = Sm,Ce, Gd,V, Ag)

The electrochemical behavior of the LaF₃ : Eu²⁺| interface (Me = Sm, Ce, Gd, V, Ag) is studied using stripping voltammetry. Current–voltage curves for cells Ag, AgCl|KCl and KF|LaF₃ : Eu²⁺|Sm (or Ce) may be viewed as background curves for analyzing solid-phase reactions with other metallic electrodes. The substrate material is found to affect properties of interfaces LaF₃ : Eu²⁺/Gd (or V), which are characterized either by solid-phase reactions involving the fluoride ion of a solid electrolyte or by reactions involving oxygen. Regularities, obtained for silver in contact with LaF₃ : Eu²⁺, link electrochemical signals of the reaction of the silver fluoride formation with the contact area.     

Oxygen reduction at the interface of nonstoichiometric fluoride single crystals with metal electrodes

Electrochemical measurements are carried out on three-phase boundaries LaF₃:Eu²⁺/Me, oxygen gas, where Me = Ti, Be, Ta, Au and also on the boundaries of CeF₃:Sr²⁺ with Ag-supported Ag and Bi microelectrodes by the methods of linear scan voltammetry, chronoamperometry, and cyclic voltammetry. The conditions beneficial for reduction of oxygen gas, transformations of chemisorbed oxygen, and the appearance of its mobile forms are considered. Results on the interaction of gaseous oxygen with metals in contact with LaF₃:Eu²⁺ single crystals are generalized. The correlation is found between the oxygen reduction potential and the difference of electronegativities Δχ Me-O. The relationship is revealed between the oxygen reduction potential and the Me-Me bond energy by taking into account the structural factor f/k _n, where f is the number of binding electrons and k _n is the coordination number.     

Electrochemical formation of a low-dimensional phase on the boundary between the LaF<Subscript>3</Subscript>:Eu<Superscript>2+</Superscript> single crystal and the metal

The kinetics of the formation of a new phase at the interface between the LaF₃:Eu²⁺ single crystal and the (Sn, Bi, or Sb) metallic electrodes was studied using potentiostatic transient measurements and voltammetry with a linear variation of voltage. A comparison of the theoretical and experimental reduced transients that define two-dimensional instantaneous nucleation on a plot of I/I _m vs. t/t _m and three-dimensional growth of the instantaneous and progressive types of nucleation on a plot of I ²/I _m² vs. t/t _m showed that the model was not fully consistent with the experiment. The dependence of the stationary current logI _A(max) of the potentiostatic transients on 1/η during the formation of the intermediate phase on the boundaries of LaF₃:Eu²⁺|Sn and LaF₃:Eu²⁺|Bi was found to be linear, which corresponds to two-dimensional nucleation and growth of the new phase.     

Interphase-exchange processes at the interface of fluorine-conducting solid electrolyte with alkaline solutions

Kinetics of fluorideion exchange at the interface between a LaF₃:Eu²⁺ single crystal and solution with different pF and pH is studied by the galvanostatic and potentiometric methods and also by impedance spectroscopy. Anodic galvanostatic transients are linearized in the coordinates ln (η–η_max) vs. t, which suggests that the exchange rate in alkaline solutions is limited by surface diffusion of fluorine adions. The surface concentration of fluorine adions с ₀ and the surface diffusion flow ν ₀ are assessed. Impedance spectroscopy studies of the exchange processes indicate that the charge-transfer resistance R _F and the heterogeneous reaction resistance R _P increase with the increase in the рН of the fluoride-containing solution and also with the increase in the time of exposure of the fluoride-selective electrode membrane in a neutral solution with pH 6.4 and the high (pF 2) content of fluorides.     

Die Bildungskonstanten der Wasserstoff—Fluor-Komplexe in konzentrierten Salzlösungen

Zusammenfassung Die Bildungskonstanten von HF und HF2^–in NaClO₄-Medien wurden aus Messungen mit einer Chinhydron- und einer LaF₃-Membranelektrode bestimmt. Die Bildungskonstanten bei den Ionenstärken 1–, 2–, 3– und 4M werden mit Hilfe einesDebye—Hückel-Ansatzes als Funktion der Ionenstärke dargestellt. Durch Extrapolation auf unendliche Verdünnung werden die thermodynamischen Bildungskonstanten bei 25°C erhalten. Die mit Hilfe der Chinhydronelektrode und der LaF₃-Membranelektrode erhaltenen Ergebnisse werden verglichen und kritisch gewertet.

---

Stability constants of hydrogen fluorides in concentrated salt media; Measurements with aLaF ₃-membrane electrode

Formation constants of HF and HF2^– in NaClO₄ media were determined from measurements with a quinhydrone and a LaF₃-membrane electrode. The formation constants at 1,2,3, and 4M ionic strength are presented as a function of the ionic strength through aDebye—Hückel approximation. Extrapolation to infinite dilution gives the thermodynamic stability constants at 25°C. The results obtained from measurements with a quinhydrone and a LaF₃-membrane electrode are compared and critically evaluated.

---

---

Mit 3 Abbildung     

Kinetics of intermediate phase growth at the interface of fluoride-conducting solid electrolytes with metal electrodes

The effect of the reference electrode (Ag, AgCl∣KF + KCl or Sn, SnF₂) on the kinetics of new phase growth at interfaces formed by LaF₃:Eu²⁺ or CeF₃:Sr²⁺ single crystal solid electrolytes with metal electrodes of Ag and Bi is studied by chronoamperometry and linear scan voltammetry. It is shown that when a solid-phase reference electrode is used, the current transients reflect hindrances associated with instantaneous two- or three-dimensional nucleation as well as limitations for fluoride ion diffusion in the solid electrolyte.     

Colour tuneability and white light generation in Yb<Superscript>3+</Superscript>–Ho<Superscript>3+</Superscript>–Tm<Superscript>3+</Superscript> co-doped SiO<Subscript>2</Subscript>–LaF<Subscript>3</Subscript> nano-glass-ceramics prepared by sol–gel method

Nanostructured transparent glass-ceramics with composition of 95SiO₂–5LaF₃ co-doped with 0.3Yb³⁺, 0.1Ho³⁺ and 0.1Tm³⁺ (mol%) were synthesized by thermal treatment of precursor sol–gel derived glasses. X-ray diffraction and transmission electron microscopy analysis point out the precipitation of hexagonal LaF₃ nanocrystals with diameter ranging from 11 to 20 nm in these nano-glass-ceramics. White light generation by means of efficient blue, green and red up-conversion luminescence under infrared excitation at 980 nm was observed and involved mechanisms were analyzed. Colour tuneability is achieved by varying the up-conversion emission ratios as a function of pump power.     

Spatially selected synthesis of LaF3 and Er-doped CaF2 crystals in oxyfluoride glasses by laser-induced crystallization

Oxyfluoride glasses with a small amount of NiO are prepared using a conventional melt quenching technique, and the spatially selected crystallization of LaF₃ and CaF₂ crystals is induced on the glass surface by irradiations of continuous wave lasers with a wavelength of λ=1064 or 1080 nm. Dots and lines including LaF₃ crystals are patterned by heat-assisted (300 °C) laser irradiations (λ=1064 nm) with a power of P=1 W and an irradiation time of 10 s for dots and a scanning speed of S=5 μm/s for lines. Lines consisting of CaF₂ crystals are also patterned in an ErF₃-doped oxyfluoride glass by laser irradiations (λ=1080 nm) with a power of P=1.7 W and a scanning speed of S=2 μm/s, and the incorporation of Er³⁺ ions into CaF₂ crystals is confirmed from micro-photoluminescence spectrum measurements. It is proposed that the lines patterned by laser irradiations in this study are consisted of the composite of LaF₃ or CaF₂ nanocrystals and SiO₂-based oxide glassy phase. It is demonstrated that a combination of Ni²⁺-dopings and laser irradiations is effective in spatially selected local crystallizations of fluorides in oxyfluoride glasses.     

Dynamic response of the fluoride ion-selective electrode

The dynamic response of the fluoride-selective electrode is shown to result from four distinct processes: ion diffusion, an undefined reaction, LaF3 dissolution and a calibration drift. Empirical equations are derived which describe the time—e.m.f. relationship over times of the order of days. Dissolution of LaF₃ is shown to be a minor factor in determining the lower limit for measurement of fluoride concentration. The calibration drift process is the main obstacle. The time to thermodynamic equilibrium when the fluoride concentration is reduced becomes very long. A model is given for the calibration drift process. This model explains many of the anomalies reported in the literature for the behaviour of the fluoride-selective electrode. A much more detailed understanding of the calibration drift process is a prerequisite to general application of the fluoride electrode to the measurement of very low concentrations of fluoride.     

Superionic Transport in Fluoride Composites and Glasses

Data on previous conductimetric studies of ionic transport in fluoride composites and vitreous materials are compiled. The F^- conductivity of composites 21SrF₂ · 79LaF₃ (content, mol %) and 34NaF · 66PbF₂ reaches 0.007 S cm^-1 at 500 K and that of glasses based on InF₃ and PbF₂, 6 × 10^-5 S cm^-1 at 400 K, which exceeds that of -PbF₂ and LaF₃ crystals.     

Thermal annealing of LaF3:Eu3+ nanocrystals synthesized by a solvothermal method and their luminescence properties

In this work, we used a low temperature solvothermal method to synthesize Eu³⁺-doped LaF₃ (LaF₃:Eu³⁺) nanocrystals. The effect of thermal annealing on their phase structures and luminescence properties was studied. Transformation from LaF₃ to LaOF was observed after the annealing, and the initial transformation process was studied using a rapid thermal annealing technique. It was found that a sufficiently high annealing temperature is required for the transformation of LaF₃ to LaOF. LaOF phase started to be formed after annealing at 500 °C for as short as 5 min, and higher annealing temperatures and longer annealing time led to a larger amount of LaOF formed. With the increase of the formation of LaOF, the luminescence was greatly enhanced. Strong O^2? → Eu³⁺ charge transfer band was present in these samples annealed at 500 °C and higher temperatures, and greatly enhanced ⁷F₀ → ⁵D₂ transition of Eu³⁺ was also observed.     

An all-solid-state polymeric membrane Pb-selective electrode with bimodal pore C60 as solid contact

An all-solid-state polymeric membrane Pb²⁺ ion-selective electrode (Pb²⁺-ISE) based on bimodal pore C₆₀ (BP-C₆₀) as solid contact has been developed. A BP-C₆₀ film can be readily formed on the surface of a glassy carbon electrode by electrochemical deposition. Cyclic voltammetry and electrochemical impedance spectroscopy have been employed to characterize the BP-C₆₀ film. The large double layer capacitance and fast charge-transfer capability make BP-C₆₀ favorable to be used as solid contact for developing all-solid-state ISEs. The all-solid-state BP-C₆₀-based Pb²⁺-ISE shows a Nernstian response in the range from 1.0 × 10⁻⁹ to 1.0 × 10⁻³ M with a detection limit of 5.0 × 10⁻¹⁰ M. The membrane electrode not only displays an excellent potential stability with the absence of a water layer between the ion-selective membrane and the underlying BP-C₆₀ solid contact, but also is insensitive to interferences from O₂, CO₂ and light. The proposed solid-contact Pb²⁺-ISE has been applied to determine Pb²⁺ in real water samples and the results agree well with those obtained by anodic stripping voltammetry.     

Effect of LaF<Subscript>3</Subscript> admixture on thermal stability of borosilicate glasses

Oxyfluoride glass-ceramics based on the aluminosilicate glass-matrix with the nano-phase of fluoride is an interesting material for optoelectronics. A new glass from the SiO₂–B₂O₃–Na₂O–LaF₃ system in which nanocrystallization of LaF₃ could be obtained as well is presented. Thermal stability of glass and the crystalline phases formed upon heat treatment were determined by DTA/DSC and XRD methods, respectively. The effect of the glass composition on thermal stability was investigated by the SEM method. It has been found that the addition of LaF₃ increases the tendency to decomposition of the borosilicate glass. In glasses with the ratio B₂O₃/(Na₂O+3La₂F₆)<1 it is possible to obtain the immersed crystallization of LaF₃ in transparent glassy matrix. The process is preceded by LaOF formation. Glasses with the composition B₂O₃/(Na₂O+3La₂F₆)≥1 revealed the tendency to La(BSiO₅) crystallization.