Thermal desorption of the PO radical from polycrystalline Pt surfaces

The PO radical was detected to desorb from polycrystalline Pt surfaces during the catalytic decomposition of dimethyl methyl phosphonate and trimethyl phosphite above 1100 K using the laser-induced fluorescence technique. The activation energy for the desorption of adsorbed PO radicals, PO(a) → PO(g), was determined to be 59±2 kcal/mol in the temperature range 1100–1350 K at different radical source pressures. The mechanisms for PO production from these two catalytic reactions are briefly discussed.     

Stability, thermal homolysis and intermediate phases of solid hydroazafullerene C59HN

Density functional (DFT) calculations, high-temperature electron paramagnetic resonance (EPR) and transmission electron microscopy (TEM) results suggest that thermal homolysis of C59HN involves a remarkably stable intermediate C59N-C59HN* structure characterised by charge redistribution from a C59N* radical to a bonded C59HN.     

Reaction of thianthrene and phenoxathiin cation radicals with 2,3-dimethyl-2-butene. Chemical and electrochemical studies

Thianthrene cation radical tetrafluoroborate (Th*+ BF4-) has been found to add to 2,3-dimethyl-2-butene (DMB) at 0 degrees C and -15 degrees C. The adduct, 2,3-dimethyl-2,3-(5,10-thianthreniumdiyl)butane ditetrafluoroborate (12), was isolated at -15 degrees C, and its 1H NMR spectrum was recorded at that temperature. The adduct was stable in CD3CN solution at -15 degrees C but decomposed slowly at 0 degrees C and quickly at 23 degrees C, forming the salt of 2,4,4,5,5-pentamethyl-2-oxazoline (8) with loss of thianthrene (Th). These results explain why earlier attempts to prepare 12 and detect its formation at room temperature with NMR spectroscopy were not successful. Reaction of Th*+ with DMB was followed with cyclic voltammetry and was found to exhibit redox catalysis in which Th was regenerated. With the faster scanning techniques of cyclic voltammetry, the formation of 12 was detectable, with a reduction potential of about -1.0 V at 25 degrees C and 3 degrees C. The observed reduction potential was in harmony with reduction potentials of a number of other, stable monoadducts. Thus, the redox catalysis involved the rapid formation of 12 and its rapid decomposition into 8 and Th, the newly formed Th being responsible for the observed enhanced oxidation currents. In contrast, 8 appears to be formed directly by oxidation of DMB by PO*+PF6-.     

Solvent and temperature gradients in separation of synthetic oxyethylene-oxypropylene block (co)polymers using high-temperature liquid chromatography

Chromatographic behavior of synthetic block (co)oligomer samples (EO)n(PO)m(EO)n and (PO)n(EO)m(PO)n with different distribution of propylene oxide (PO) and ethylene oxide (EO) monomer units was investigated on three types of stationary phases on zirconium dioxide support: Zr-PS (polystyrene), Zr-carbon, and Zr-carbon C18. The effects of the distribution and sequence of the oxyethylene and oxypropylene monomer units on the chromatographic retention depend on the type of the stationary phase, but are strongly affected by the organic modifier (methanol or ACN) in aqueous-organic mobile phase. Special attention was focused on the influence of the mobile-phase composition on the separation according to the EO and PO distribution. Zirconia-based columns are stable at elevated temperatures and can be used in high-temperature LC (HTLC); hence, we investigated the temperature effects on the chromatographic behavior up to 90 degrees C. The applications of solvent and temperature gradients were compared on the zirconia stationary phases in the RP mode.     

Steady-state photocatalytic epoxidation of propene by O2 over V2O5SiO2 photocatalysts

A silica-supported, lowly loaded vanadium oxide (V2O5/SiO2) photocatalyst promotes the photocatalytic epoxidation of propene with O2 at steady state in a flow reactor system. Very little deep oxidation of propene into CO2 takes place over V2O5/SiO2, in contrast to the results obtained over a TiO2 photocatalyst in which total oxidation is the main path. With each loading, the sums of the selectivities into propene oxide (PO) and propanal (PA) at steady state were almost the same. The monomeric VO4 tetrahedral species dispersed on SiO2 yield PO under UV irradiation. The less dispersed vanadium oxide species on SiO2 promote the isomerization of PO into PA. We utilized a flow reactor system in which the short contact time reduced the isomerization and resultant decomposition of PO over the catalyst surface.     

Electronic isomerism (electromerism) of 6,8-di-tert-butyl-3H-phenoxazin-3-one oxime radical

Russian Chemical Bulletin - A radical stable at room temperature was prepared by the oxidation of a toluene solution of 6,8-di-(tert-butyl)-3H-phenoxazin-3-one oxime with lead oxide PbO2. The...     

自由基C59N及双体(C59N)2的理论研究

用INDO系列方法对自由基C59N及双体(C59N)2进行了理论研究,结果表明: N的掺入使C60笼发生畸变, N向笼外突出, 碳氮6-6键上的C自旋密度较大, 两C59N自由基在这个碳上以C-C单键连接形成双体为C2h, C2v对称性。其中C2v构型更稳定, 且N与附近的三个碳均以单键连接。理论计算的电子光谱与实验吻合较好。(C59N)2易分解为单体C59N。     

Microenvironmental and conformational structure of triblock copolymers in aqueous solution by 1H and 13C NMR spectroscopy

1H and 13C nuclear magnetic resonance (NMR) spectra of poly(ethylene oxide)-poly(propylene oxide)-poly(ethylene oxide) (PEO-PPO-PEO) triblock copolymers in D2O solutions have been systematically investigated. The detailed assignments of various 1H and 13C NMR signals are presented. The hyperfine structure of PO -CH2- protons was clearly assigned, the arising reason of this hyperfine structure was attributed to the influence of the chiral center of -CHCH3- groups and the direct coupling between the PO -CH2- and -CH3 protons. The external standard 2,2-dimethyl-2-silapentane-5-sulfonate sodium salt (DSS) was firstly applied in this system. Accurate chemical shift values referenced to the external standard DSS were obtained. 1H NMR chemical shift of PO -CH2- and -CH3 signals shows a larger decrease in ppm values than that of EO -CH2- signal with the increase of PPO/PEO ratio or temperature indicating that PO segments exist in a more hydrophobic microenvironment. A new resonance signal assigned to the PO -CH2- protons appeared when the temperature is above the CMT, which is attributed to the breakdown of the intra-molecular (C-H)...O hydrogen bond between the PO -CH2- protons and the ester oxygens. The breakdown of this intra-molecular hydrogen bond may result in a decrease of gauche conformers of the PPO chain. The increase of 13C NMR chemical shift of block copolymers validates this conformational change assumption. It can be inferred that the amount of gauche conformers decreases whereas that of trans conformers increases in both PO and EO chains when elevating the PPO/PEO ratio or temperature. The observed 13C NMR chemical shifts of PO segments show a bigger increase than those of EO segments, supporting the formation of a nonpolar microenvironment around PO segments.     

Interaction between cationic, anionic, and non-ionic surfactants with ABA block copolymer Pluronic PE6200 and with BAB reverse block copolymer Pluronic 25R4

The interaction in aqueous solution between either the normal block copolymer poly(ethylene oxide)-poly(propylene oxide)-poly(ethylene oxide): Pluronic PE6200 [(EO)(11)-(PO)(28)-(EO)(11)], or the reverse block copolymer poly(propylene oxide)-poly(ethylene oxide)-poly(propylene oxide): Pluronic 25R4 [(PO)(19)-(EO)(33)-(PO)(19)] and the surfactants sodium decylsulfate, C(10)OS, decyltrimethyl ammonium bromide, C(10)TAB, and pentaethylene glycol monodecyl ether, C(10)E(5), was investigated and the aggregation behavior of these surfactants with Pluronics was compared. Surface tension measurements show that Pluronics in their non-aggregated state better interact with the anionic surfactant C(10)OS than with cationic and non-ionic ones. The presence of the two Pluronics induces the same lowering of the aggregation number of C(10)OS as shown by fluorescence quenching measurements. The number of polymer chains necessary to bind each C(10)OS aggregate has been estimated to be approximately 6 for PE6200 and approximately 2 for 25R4. Furthermore, this surfactant also induces the same increment in the gyration radius of the polymers as revealed by viscosimetry. Calorimetric results have been reasonably reproduced by applying a simple equilibrium model to the aggregation processes.     

Theoretical study of propylene epoxidation heterogeneous-homogeneous mechanism over MoOx/SiO2 catalyst

The green direct propylene (C₃H₆) epoxidation on MoO_x is well studied by experimental methods, but detailed molecular reaction mechanism studies using in-silico experiments method are few. Here, the different oxidation heterogeneous-homogeneous pathways for MoO_x/SiO₂ catalyst are calculated, mainly involving Mo=O on di-oxo tetracoordinate MoO_x, allyl peroxy (C₃H₅OO•), and allyloxy (C₃H₅O•) radicals. The results show that, for surface reaction mechanism with Mo=O, the barriers of propylene oxide (PO) and acetone generation are too high; in comparison, the byproduct acrolein is more beneficial product with a lower barrier. In heterogeneous-homogeneous pathways, the desorbed allyl (C₃H₅•) from the surface can easily combine with O₂ to synthesize C₃H₅OO• radical, and in the partial oxidation of propylene with C₃H₅OO• as an oxidant, PO is more beneficial with a low barrier compared to byproducts such as propanal, acetone, acetaldehyde, etc. These indicate that (a) gas-phase free radical reactions have important effects on PO generation, in which C₃H₅OO• is the main active species; (b) on MoO_x surface, Mo=O is difficult to be used as the active O species for PO production. Further research is needed on other active sites such as Mo-O-Mo or defective sites.     

Tin-centered radical and cation: stable and free

The first stable stannyl radical (tBu2MeSi)3Sn* (1) has been synthesized by the reaction of tBu2MeSiNa with SnCl2-dioxane in diethyl ether. The X-ray crystal structure and electron paramagnetic resonance (EPR) data of this radical show that 1 has a planar geometry, being a pi-radical in both the solid and the liquid states. One-electron oxidation of 1 with Ph3C+.B(C6F5)4- in benzene quantitatively produced the corresponding cation (tBu2MeSi)3Sn+.B(C6F5)4- (2), representing the stable free stannylium ion that has been fully characterized by X-ray analysis and NMR data. Being free, 2 features a record downfield shifted resonance for stannylium ions: +2653 ppm.     

1,2-dithiin annelated with bicyclo[2.2.2]octene frameworks. One-electron and two-electron oxidations and formation of a novel 2,3,5,6-tetrathiabicyclo[2.2.2]oct-7-ene radical cation with remarkable stability owing to a strong transannular interaction

A stable derivative of 1,2-dithiin annelated with bicyclo[2.2.2]octene frameworks 4 was synthesized as red crystals by the reaction of a dilithiated dimer of bicyclo[2.2.2]octene with elemental sulfur in 59% yield. The cyclic voltammetry of 4 in CH(2)Cl(2) at -78 degrees C showed two reversible oxidation waves at E(1/2) +0.18 V and +0.72 V versus Fc/Fc(+), indicating that the radical cation and dication of 4 are stable under these conditions. Upon chemical one-electron oxidation of 4 in a rather low concentration (4.0 x 10(-4) M) with a 1.5 equiv of SbCl(5) in CH(2)Cl(2), a radical cation 4.+ was formed, whose spin distribution was determined by ESR spectroscopy and by the results of theoretical calculations (UB3LYP/6-31G). The electronic absorption spectrum of 4.+ in CH(2)Cl(2) exhibited a maximum absorption at 428 nm (epsilon = 2.3 x 10(3)), which was hypsochromically shifted from that of neutral 4 (469 nm). When the radical cation 4.+ was produced in higher concentration (0.06 M) in CH(2)Cl(2), a disproportionation was found to take place to give a SbCl(6)(-) salt of remarkably stable radical cation 5.+ having a novel 2,3,5,6-tetrathiabicyclo[2.2.2]oct-7-ene structure. In the X-ray structure of 5.+SbCl(6)(-), the transannular distance (2.794(3) A) between the sulfur atoms was found to be less than the sum of the van der Waals radii of a sulfur atom (3.70 A), suggesting the existence of a bonding interaction between the two disulfide linkages. The theoretical calculations (UB3LYP/6-31G) suggested that this transannular interaction could be described as the resonance between the limiting structures, each of them having a two-center three-electron bond between two sulfur atoms belonging to two different disulfide linkages: thus, both the spin and positive charge are equally delocalized to the four sulfur atoms, causing a great stabilization of 5.+. On the other hand, the 1,2-dithiin radical cation 4.+ was found to readily react with triplet oxygen with subsequent rearrangement to give the 1,2-dithiolium derivative 6+ having a carboxyl group. Finally, the reaction of 4 with an excess amount of SbF(5) gave the corresponding dication 4(2+), which was found to be a 6pi aromatic system on the basis of the results of NMR measurement and theoretical calculations.     

在Au／TS—1上原位再生H2O2用于丙烯环氧化反应研究

在液相条件下,对Au/TS-1催化氧化和氢气和原位再生H2O2用于丙烯的环氧化进行了研究。结果表明,氧气的存在促进了丙烯的加氢,同时分子氧的活化也离不开氢气;只有在氢气和共存时,丙烯环氧化的反应才能进行,丙烯的加氢和分子氧的活化发生在同一活性中心上。在液相条件下环氧丙烷（PO）收率比在气相条件下得到的高。     

Study on Chemisorption, Catalytic Behavior, and Stability of Supported Au Catalyst for the Propylene Epoxidation Reaction

The supported Au/TiO2 and Au/TiO2-SiO2 catalysts were prepared by deposition precipitation method. The TPD study reveals that propylene oxide competes with propylene to be adsorbed on the same adsorptive center-Tin site on the surface of the catalyst and that the adsorbing capacity of the catalyst for propylene oxide is larger than that for propylene. Catalytic behavior for propylene epoxidation with H2 and O2 was tested in a micro-reactor. Under typical conditions, the selectivity for propylene oxide is over 87%. The TG curves show that PO successive oxidation cause carbon deposition on the active center and deactivation of the Au catalysts. Because the amounts of Tin site decrease significantly, and consequently the separation between Tin sites increases, the Au/TiO2-SiO2 catalyst is more stable than Au/TiO2.     

双金属催化环氧化物聚合动力学研究

研究了双金属氰化络合催化剂DMC催化环氧丙烷聚合的动力学 .用测定反应过程体系压力变化来决定聚合的起始速率 ,发现聚合反应速率正比于催化剂用量C ,单体浓度M的平方 .该实验规律可以从单体参与链引发的动力学特点解释 .考察了温度对聚合反应速率的影响并求得了表观活化能为 5 9 1kJ·mol- 1 ,该值与环氧聚合的卟啉铝、稀土络合物等催化体系接近 .     

Reactions of fullerenes with reactive methylene organophosphorus reagents: efficient synthesis of organophosphorus group substituted C60 and C70 derivatives

Treatment of C70 with cycloalkylaminomethylenebisphosphonates in the presence of NaH gave corresponding C70 dimers 1 in good yield, while the methanofullerenes, C70>CH(PO3Et2) (3) and C70>C(PO3Et2)2 (4) or C60>CH(PO3Et2) (5) and C60>C(PO3Et2)2 (6), were obtained, respectively, by the reaction of C70 or C60 with tetraethyl methylenediphosphonate in the presence of NaH. Diethyl cyanomethylphosphonate reacted with C60 or C70 under similar conditions to afford C60>C(PO3Et2)CN (7) and C70>C(PO3Et2)CN (8). Furthermore, the presence of weak electronic interactions between two fullerene cages of fullerene dimers was demonstrated by cyclic voltammetry. A radical mechanism was proposed for the formation of the fullerene derivatives on the basis of the ESR studies.     

Deviation between the chemistry of Ce(IV) and Pu(IV) and routes to ordered and disordered heterobimetallic 4f/5f and 5f/5f phosphonates

The heterobimetallic actinide compound UO(2)Ce(H(2)O)[C(6)H(4)(PO(3)H)(2)](2)·H(2)O was prepared via the hydrothermal reaction of U(VI) and Ce(IV) in the presence of 1,2-phenylenediphosphonic acid. We demonstrate that this is a kinetic product that is not stable with respect to decomposition to the monometallic compounds. Similar reactions have been explored with U(VI) and Ce(III), resulting in the oxidation of Ce(III) to Ce(IV) and the formation of the Ce(IV) phosphonate, Ce[C(6)H(4)(PO(3)H)(PO(3)H(2))][C(6)H(4)(PO(3)H)(PO(3))]·2H(2)O, UO(2)Ce(H(2)O)[C(6)H(4)(PO(3)H)(2)](2)·H(2)O, and UO(2)[C(6)H(4)(PO(3)H)(2)](H(2)O)·H(2)O. In comparison, the reaction of U(VI) with Np(VI) only yields Np[C(6)H(4)(PO(3)H)(2)](2)·2H(2)O and aqueous U(VI), whereas the reaction of U(VI) with Pu(VI) yields the disordered U(VI)/Pu(VI) compound, (U(0.9)Pu(0.1))O(2)[C(6)H(4)(PO(3)H)(2)](H(2)O)·H(2)O, and the Pu(IV) phosphonate, Pu[C(6)H(4)(PO(3)H)(PO(3)H(2))][C(6)H(4)(PO(3)H)(PO(3))]·2H(2)O. The reactions of Ce(IV) with Np(VI) yield disordered heterobimetallic phosphonates with both M[C(6)H(4)(PO(3)H)(PO(3)H(2))][C(6)H(4)(PO(3)H)(PO(3))]·2H(2)O (M = Ce, Np) and M[C(6)H(4)(PO(3)H)(2)](2)·2H(2)O (M = Ce, Np) structures, as well as the Ce(IV) phosphonate Ce[C(6)H(4)(PO(3)H)(PO(3)H(2))][C(6)H(4)(PO(3)H)(PO(3))]·2H(2)O. Ce(IV) reacts with Pu(IV) to yield the Pu(VI) compound, PuO(2)[C(6)H(4)(PO(3)H)(2)](H(2)O)·3H(2)O, and a disordered heterobimetallic Pu(IV)/Ce(IV) compound with the M[C(6)H(4)(PO(3)H)(PO(3)H(2))][C(6)H(4)(PO(3)H)(PO(3))]·2H(2)O (M = Ce, Pu) structure. Mixtures of Np(VI) and Pu(VI) yield disordered heterobimetallic Np(IV)/Pu(IV) phosphonates with both the An[C(6)H(4)(PO(3)H)(PO(3)H(2))][C(6)H(4)(PO(3)H)(PO(3))]·2H(2)O (M = Np, Pu) and An[C(6)H(4)(PO(3)H)(2)](2)·2H(2)O (M = Np, Pu) formulas.     

Adducts of thianthrene- and phenoxathiin cation radical salts with symmetrical alkynes. Structure and formation of cumulenes on alumina leading to alpha-diketones, alpha-hydroxyalkynes, and alpha-acetamidoalkynes

[reaction: see text] Thianthrene cation radical tetrafluoroborate (Th*+ BF4-) added to 2-butyne, 3-hexyne, 4-octyne, and 5-decyne in MeCN to form trans bisadducts R(Th+)C=C(Th+)R, where R = Me, Et, Pr, Bu (7a-d). Phenoxathiin cation radical tetrafluoroborate (PO*+ BF4-) added similarly to the last three alkynes to form adducts R(PO+)C=C(PO+)R, 8b-d. Cyclic monoadducts were not found. The trans structures of 7 and 8 were deduced with X-ray crystallography (7c) and NMR spectroscopy. When solutions of adducts in CHCl3 and MeCN were deposited on activated alumina, elimination of thianthrene (Th) and phenoxathiin (PO) occurred almost quantitatively. Detailed studies with (7b-d) indicated that a cumulene (15) was formed by the elimination of Th and that 15 was subsequently converted into small amounts of other products. In CHCl3, these products were the respective alkyne, thianthrene 5-oxide, an alpha-diketone (11), an alpha-hydroxyalkyne (12), and hydrogen. The same products were formed in MeCN along with an alpha-acetamidoalkyne (13). The formation of 15 and products derived from it is explained and was confirmed by preparation and reactions of 2,3,4-hexatriene.     

Oxidation of aromatic compounds: XVI. Radical cations derived from acetylenic compounds with electron-withdrawing groups: Reactions and ESR parameters

One-electron oxidation of aryl-substituted acetylenes ArC≡CX where X is an electron-withdrawing group gives different products, depending on the X substituent. Acetylenic substrates with medium-strength electron-withdrawing substituents, X = CO₂R, COAr, COR, PO(OEt)₂, give rise to tetrasubstituted ethenes X(ArCO)C=C(COAr)X. Compounds with strong electron-withdrawing groups (X = COCF₃, COCO₂R, CN) are converted into furan derivatives. Probable mechanisms of transformations of ArC≡CX radical cations into the final products are discussed. Radical cations derived from disubstituted acetylenes were characterized by ESR spectroscopy.