Polarizable model of water with field-dependent polarization

The polarizable charge-on-spring model of water with three Gaussian charges developed by the present authors [A. Baranyai and P. T. Kiss, J. Chem. Phys. 133, 144109 (2010)] was studied. We introduced an analytic function for the polarizability in terms of the local electric field. Following theoretical suggestions, the polarizability decreases from its experimental gas-phase value, in our approach, toward a high-field threshold. Using this modified polarizability, we reparameterized the model by calculating its dielectric constant and obtained good estimates of density and internal energy for ambient water, hexagonal ice, and water cluster properties. Mimicked by the new model, we studied liquid water under the impact of homogeneous static electric field in the rage of 0-2.5 V/?. Both the density and the average dipole moment increase with the strength of the electric field. However, the internal energy shows a minimum at ~0.35 V/?. At this field strength, the model starts ordering into a crystal structure. At higher fields the liquid forms a crystalline structure which is a special version of cubic ice.     

Structure, thermodynamics, and liquid-vapor equilibrium of ethanol from molecular-dynamics simulations using nonadditive interactions

We present a molecular-dynamics simulation study of the bulk and liquid-vapor interfacial properties of ethanol using a polarizable force field based on the fluctuating charge (FQ) formalism, as well as the nonpolarizable CHARMM22 force field. Both models are competitive with respect to the prediction of ambient liquid properties such as liquid density, enthalpy of vaporization, dielectric constant, and self-diffusion constants. The polarizable model predicts an average condensed-phase dipole moment of 2.2 D associated with an induced liquid-phase dipole moment of 0.6 D; though qualitatively in agreement with earlier nonadditive models as well as recent Car-Parinello calculations, the current FQ model underestimates the condensed-phase dipole moment. In terms of liquid structure, both models are in agreement with recent neutron-diffraction results of liquid ethanol structure, although the polarizable model predicts the hydroxyl-hydrogen-hydroxyl-hydrogen structure factor in closer agreement with the experimental data. In terms of interfacial properties, both models predict ambient surface tension to within 4% of the experimental value of 22.8 dyncm, while overestimating the surface excess entropy by almost a factor of 2. Both models display the characteristic preferential orientation of interfacial molecules. The polarizable model allows for a monotonic variation of the average molecular dipole moment from the bulk value to that of the vapor phase. Consequently, there is a dramatic difference in the surface potential predicted by the polarizable and nonpolarizable models. The polarizable model estimates a surface potential of -209+/-3 mV, while the nonpolarizable model yields a value of -944+/-10 mV. Finally, based on the vapor-liquid equilibrium simulation data from several temperatures, we estimate the critical properties of both models. As observed with other FQ models for associating fluids (such as water and methanol), and counter to what one would anticipate by modeling more physically the electrostatic response to local environment, the current FQ model underestimates the critical temperature and overestimates the critical density of ethanol; moreover, the FQ model is, in this respect, equivalent to the underlying fixed-charge model. These results further suggest the need to revisit polarizable models in terms of quantitative vapor-liquid equilibrium prediction.     

Charge-on-spring polarizable water models revisited: from water clusters to liquid water to ice

The properties of two improved versions of charge-on-spring (COS) polarizable water models (COS/G2 and COS/G3) that explicitly include nonadditive polarization effects are reported. In COS models, the polarization is represented via a self-consistently induced dipole moment consisting of a pair of separated charges. A previous polarizable water model (COS/B2), upon which the improved versions are based, was developed by Yu, Hansson, and van Gunsteren. To improve the COS/B2 model, which overestimated the dielectric permittivity, one additional virtual atomic site was used to reproduce the water monomer quadrupole moments besides the water monomer dipole moment in the gas phase. The molecular polarizability, residing on the virtual atomic site, and Lennard-Jones parameters for oxygen-oxygen interactions were varied to reproduce the experimental values for the heat of vaporization and the density of liquid water at room temperature and pressure. The improved models were used to study the properties of liquid water at various thermodynamic states as well as gaseous water clusters and ice. Overall, good agreement is obtained between simulated properties and those derived from experiments and ab initio calculations. The COS/G2 and COS/G3 models may serve as simple, classical, rigid, polarizable water models for the study of organic solutes and biopolymers. Due to its simplicity, COS type of polarization can straightforwardly be used to introduce explicit polarization into (bio)molecular force fields.     

Statistical mechanically averaged molecular properties of liquid water calculated using the combined coupled cluster/molecular dynamics method

Liquid water is investigated theoretically using combined molecular dynamics (MD) simulations and accurate electronic structure methods. The statistical mechanically averaged molecular properties of liquid water are calculated using the combined coupled cluster/molecular mechanics (CC/MM) method for a large number of configurations generated from MD simulations. The method includes electron correlation effects at the coupled cluster singles and doubles level and the use of a large correlation consistent basis set. A polarizable force field has been used for the molecular dynamics part in both the CC/MM method and in the MD simulation. We describe how the methodology can be optimized with respect to computational costs while maintaining the quality of the results. Using the optimized method we study the energetic properties including the heat of vaporization and electronic excitation energies as well as electric dipole and quadrupole moments, the frequency dependent electric (dipole) polarizability, and electric-field-induced second harmonic generation first and second hyperpolarizabilities. Comparisons with experiments are performed where reliable data are available. Furthermore, we discuss the important issue on how to compare the calculated microscopic nonlocal properties to the experimental macroscopic measurements.     

Dielectric Relaxation Around a Charged Colloidal Cylinder in an Electrolyte

The polarizability and corresponding dielectric relaxation of the Debye-Hückel (DH) atmosphere surrounding a charged rod-like polyelectrolyte immersed in an ionic solution of a symmetrical electrolyte is determined following the method developed by J. A. Fornés [Phys. Rev. E 57, 2110 (1998)]. Several formulas are given to estimate the DH atmosphere parameters, namely, the polarizability at zero frequency, alpha(0), the relaxation time, tau, the cloud capacitance, C, the average displacement of the ionic cloud, delta, the square root dipole moment quadratic fluctuation, (1/2), and the thermal fluctuating field, (1/2). The Poisson-Boltzmann equation is solved numerically to apply the theory to a highly charged polyelectrolyte such as DNA in solution, although formulas valid for the DH approximation are also given. A dispersion in the polarizability and correspondingly in the dielectric constant of these solutions in the microwave region is predicted. For instance, considering a DNA length of 1000 ?, with its reduced linear charge density xi(0)=4.25 and ionization factor gamma=0.5, immersed in a NaCl solution (40 mM), we predict a polarizability of the DH atmosphere at zero frequency alpha(0) of 1x10(-33) Fm(2) ( approximately 6.1x10(6)) times greater than the mean value of the polarizability of water) and the corresponding fluctuating dipole moment p of 2.1x10(-27) Cm ( approximately 600 times greater than the permanent dipole moment of water molecule). The relaxation time and the average displacement of the ionic cloud are tau=1.6 ns and delta=14. ?, respectively. This displacement is produced by the thermal fluctuating field, which, in this case, at room temperature is (1/2)=2 x10(6) V/m. Copyright 2000 Academic Press.     

The coupling constant polarizability and hyperpolarizabilty of 1J(NH) in N-methylacetamide, and its application for the multipole spin-spin coupling constant polarizability/reaction field approach to solvation

We present a benchmark study of a combined multipole spin-spin coupling constant (SSCC) polarizability/reaction field (MJP/RF) approach to the calculation of both specific and bulk solvation effects on SSCCs of solvated molecules. The MJP/RF scheme is defined by an expansion of the SSCCs of the solvated molecule in terms of coupling constant dipole and quadrupole polarizabilities and hyperpolarizabilities derived from single molecule ab initio calculations. The solvent electric field and electric field gradient are calculated based on data derived from molecular dynamics (MD) simulations thereby accounting for solute-solvent dynamical effects. The MJP/RF method is benchmarked against polarizable QM/MM calculations for the one-bond N-H coupling constant in N-methylacetamide. The best agreement between the MJP/RF and QM/MM approaches is found by truncating the electric field expansion in the MJP/RF approach at the linear electric field level. In addition, we investigate the sensitivity of the results due to the choice of one-electron basis set in the ab initio calculations of the coupling constant (hyper-)polarizabilities and find that they are affected by the basis set in a way similar to the coupling constants themselves.     

Electrochromism and Solvatochromism

The position and the intensity of electronic bands are influenced by an electric field. Pronounced changes in the position of absorption bands are mainly due to the dipole moment of the molecule in the ground state and the change in the dipole moment during the excitation process, and pronounced changes in intensity are due to the field dependence of the transition moment, which can be described by the transition polarizability. The effect of an external electric field on the optical absorption (electrochromism) of suitable molecules can be used to determine the dipole moment in the ground state, the change in dipole moment during the excitation process, the direction of the transition moment of the electronic band, and certain components of the transition polarizability tensor. These data largely determine the strong solvatochromism (solvent-dependence of the position and intensity of electronic bands), which is observed in particular with molecules having large dipole moments. Smaller contributions to solvatochromism result from dispersion interactions, which predominate in the case of nonpolar molecules. The models developed have been experimentally checked and verified by a combination of electro-optical absorption measurements (influence of an external electric field on absorption) and investigation of the solvent-dependence of the electronic bands.     

Classical and quantum mechanical/molecular mechanical molecular dynamics simulations of alanine dipeptide in water: comparisons with IR and vibrational circular dichroism spectra

We have implemented the combined quantum mechanical (QM)/molecular mechanical (MM) molecular dynamics (MD) simulations of alanine dipeptide in water along with the polarizable and nonpolarizable classical MD simulations with different models of water. For the QM/MM MD simulation, the alanine dipeptide is treated with the AM1 or PM3 approximations and the fluctuating solute dipole moment is calculated by the Mulliken population analysis. For the classical MD simulations, the solute is treated with the polarizable or nonpolarizable AMBER and polarizable CHARMM force fields and water is treated with the TIP3P, TIP4P, or TIP5P model. It is found that the relative populations of right-handed alpha-helix and extended beta and P(II) conformations in the simulation trajectory strongly depend on the simulation method. For the QM/MM MD simulations, the PM3/MM shows that the P(II) conformation is dominant, whereas the AM1/MM predicts that the dominant conformation is alpha(R). Polarizable CHARMM force field gives almost exclusively P(II) conformation and other force fields predict that both alpha-helical and extended (beta and P(II)) conformations are populated with varying extents. Solvation environment around the dipeptide is investigated by examining the radial distribution functions and numbers and lifetimes of hydrogen bonds. Comparing the simulated IR and vibrational circular dichroism spectra with experimental results, we concluded that the dipeptide adopts the P(II) conformation and PM3/MM, AMBER03 with TIP4P water, and AMBER polarizable force fields are acceptable for structure determination of the dipeptide considered in this paper.     

The Role of Computational Chemistry in the Experimental Determination of the Dipole Moment of Molecules in Solution

The methods for the experimental determination of electric dipole moment of molecules in solution from measurements of dielectric permittivity and refractive index are traditionally based on the classical Onsager model. In this model the molecular solute is approximated as a simple polarizable point dipole inside a spherical or ellipsoidal cavity of a dielectric medium representing the solvent. However, the inadequacies of the model resulting from the assumption of a simple shape of the cavity, for the evaluation of the cavity field effect, and from the uncertainty of the polarizability of the molecular solute influences the results and hampers the comparison with the electric dipole moments computed from quantum chemical solvation models. In this article we propose a new method for the experimental determination of the electric dipole moment in solution in which information from the Polarizable Continuum Model calculations are used in place of the Onsager model. The new method overcomes the limitations of this latter model regarding both the cavity field effect and the polarizability of the molecular solutes, and thus allows a coherent comparison between experimental and computed dipole moments of solvated molecules. © 2019 Wiley Periodicals, Inc.     

A polarizable electrostatic model of the N‐methylacetamide dimer

Our previously developed polarizable electrostatic model is applied to isolated N‐methylacetamide (NMA) and to three hydrogen‐bonded configurations of the NMA dimer. Two versions of the model are studied. In the first one (POL1), polarizability along the valence bonds is described by induced bond charge increments, and polarizability perpendicular to the bonds is described by cylindrically isotropic induced atomic dipoles. In the other version (POL2), the induced bond charge increments are replaced by induced atomic dipoles along the bonds. The parameterization is done by fitting to ab initio MP2/6‐31++G(d,p) electric potentials. The polarizability parameters are determined by subjecting the NMA molecule to various external electric fields. POL1 turns out to be easier to optimize than POL2. Both models reproduce well the ab initio electric potentials, molecular dipole moments, and molecular polarizability tensors of the monomer and the dimers. Nonpolarizable models are also investigated. The results show that polarization is very important for reproducing the electric potentials of the studied dimers, indicating that this is also the case in hydrogen bonding between peptide groups in proteins. © 2001 John Wiley & Sons, Inc. J Comput Chem 22: 1933–1943, 2001     

Calculation of molecular electric polarizabilities and dipole moments. II. The LiH molecule

We use a variation–perturbation method to calculate the electric polarizabilities and the electric dipole moment of the LiH molecule. We obtain 4.455 for the perpendicular polarizability and 4.001 (×10^?24 cm³) for the parallel polarizability. Our result for the electric dipole moment at equilibrium nuclear distance is 5.866, which is in excellent agreement with the experimental value 5.828 debye units.     

Electrostatic properties of aqueous salt solution interfaces: a comparison of polarizable and nonpolarizable ion models

The effects of ion force field polarizability on the interfacial electrostatic properties of approximately 1 M aqueous solutions of NaCl, CsCl, and NaI are investigated using molecular dynamics simulations employing both nonpolarizable and Drude-polarizable ion sets. Differences in computed depth-dependent orientational distributions, "permanent" and induced dipole and quadrupole moment profiles, and interfacial potentials are obtained for both ion sets to further elucidate how ion polarizability affects interfacial electrostatic properties among the various salts relative to pure water. We observe that the orientations and induced dipoles of water molecules are more strongly perturbed in the presence of polarizable ions via a stronger ionic double layer effect arising from greater charge separation. Both anions and cations exhibit enhanced induced dipole moments and strong z alignment in the vicinity of the Gibbs dividing surface (GDS) with the magnitude of the anion induced dipoles being nearly an order of magnitude larger than those of the cations and directed into the vapor phase. Depth-dependent profiles for the trace and z z components of the water molecular quadrupole moment tensors reveal 40% larger quadrupole moments in the bulk phase relative to the vapor which mimics a similar observed 40% increase in the average water dipole moment. Across the GDS, the water molecular quadrupole moments increase nonmonotonically (in contrast to the water dipoles) and exhibit a locally reduced contribution just below the surface due to both orientational and polarization effects. Computed interfacial potentials for the nonpolarizable salts yield values 20-60 mV more positive than pure water and increase by an additional 30-100 mV when ion polarizability is included. A rigorous decomposition of the total interfacial potential into ion monopole, water and ion dipole, and water quadrupole components reveals that a very strong, positive ion monopole contribution is offset by negative contributions from all other potential sources. Water quadrupole components modulated by the water density contribute significantly to the observed interfacial potential increments and almost entirely explain observed differences in the interfacial potentials for the two chloride salts. By lumping all remaining nonquadrupole interfacial potential contributions into a single "effective" dipole potential, we observe that the ratio of quadrupole to "effective" dipole contributions range from 2:1 in CsCl to 1:1.5 in NaI, suggesting that both contributions are comparably important in determining the interfacial potential increments. We also find that oscillations in the quadrupole potential in the double layer region are opposite in sign and partially cancel those of the "effective" dipole potential.     

Electric parameters of photosystem II particles — electric light scattering study

Electric light scattering and microelectrophoresis were applied to investigate the electric moments (permanent dipole moment and electric polarizability and electrophoretic mobility of envelope-free chloroplasts and photosystem II (PS II particles. The effect of the removal of the extrinsic polypeptides (18, 24 and 33 kDa) on the electric moments was also studied. A significant difference was observed between the orientation behaviour of chloroplasts and PS II preparations. The data indicate that the permanent and induced dipole moments contribute to the orientation of the PS II particles, whereas chloroplasts possess induced dipole moment only.

NaCl and Tris treatments of PS II preparations influence both the transverse permanent dipole moment and the electric polarizability of PS II particles. The increase in the electrophoretic mobility of PS II particles on removal of the extrinsic proteins corresponds to an increase in the electric polarizability value, demonstrating its interfacial nature.     

Water polarizability in condensed phase: ab initio evaluation by cluster approach

The polarizability of a water molecule in liquid is evaluated via ab initio and density functional calculations for water clusters. This work has considerably improved our previous effort [J Chem Phys 1999, 110, 11987] to attain quantitative accuracy for polarizability. The calculations revealed that the water polarizability in the liquid is reduced from that in the gaseous phase by 7-9%. These results suggest significant implications for polarizable water models.     

Electric properties of hydrogen iodide: Reexamination of correlation and relativistic effects

The electric dipole moment and the static dipole polarizability of the hydrogen iodide molecule were studied using sophisticated correlated and relativistic methods. Both scalar and spin–orbit relativistic effects were carefully accounted for. We conclude that the large differences between the theoretical and experimental dipole moment, the dipole moment derivative and the polarizability cannot be reconciled by improved account of electron correlation and relativistic effects. The most striking difference between theory and experiment is observed for the polarizability anisotropy. We believe that experimental data, namely the experimental dipole moment (the most recent value is 0.176 au as compared to our best theoretical estimate, 0.154±0.003 au), the parallel polarizability (44.4 and 38.47±0.05 au) and the anisotropy (11.4 and 2.33±0.05 au) must be inaccurate. Experimental and theoretical perpendicular polarizability components (33.0 and 36.14±0.05 au,) and the mean polarizability (36.8 and 36.92±0.05 au) agree better. Our vibrationally corrected relativistic CCSD(T) results represent the most sophisticated predictions of electric properties of HI obtained so far.Contribution to the Björn Roos Honorary Issue     

Benchmarking the multipole shielding polarizability/reaction field approach to solvation against QM/MM: applications to the shielding constants of N-methylacetamide

We present a benchmark study of a combined multipole shielding polarizability/reaction field (MSP/RF) approach to the calculation of both specific and bulk solvation effects on nuclear magnetic shielding constants of solvated molecules. The MSP/RF scheme is defined by an expansion of the shielding constants of the solvated molecule in terms of electric field and field gradient property derivatives derived from single molecule ab initio calculations. The solvent electric field and electric field gradient are calculated based on data derived from molecular dynamics simulations, thereby accounting for solute-solvent dynamical effects. The MSP/RF method is benchmarked against polarizable quantum mechanics/molecular mechanics (QM/MM) calculations. The best agreement between the MSP/RF and QM/MM approaches is found by truncating the electric field expansion in the MSP/RF approach at the linear electric field level which is due to the cancelation of errors. In addition, we investigate the sensitivity of the results due to the choice of one-electron basis set in the ab initio calculations of the property derivatives and find that these derivatives are affected by the basis set in a way similar to the shielding constants themselves.     

Conformational simulations of aqueous solvated alpha-conotoxin GI and its single disulfide analogues using a polarizable force field model

The solution conformation of alpha-conotoxin GI and its two single disulfide analogues are simulated using a polarizable force field in combination with the molecular fragmentation quantum chemical calculation. The polarizability is explicitly described by allowing the partial charges and fragment dipole moments to be variables, with values coming from the linear-scaling energy-based molecular fragmentation calculations at the B3LYP/6-31G(d) level. In comparison with the full quantum chemical calculations, the fragmentation approaches can yield precise ground-state energies, dipole moments, and static polarizabilities for peptides. The B3LYP/6-31G(d) charges and fragment-centered dipole moments are introduced in calculations of electrostatic terms in both AmberFF03 and OPLS force fields. Our test calculations on the gas-phase glucagon (PDB code: 1gcn) and solvated alpha-conotoxin GI (PDB code: 1not) demonstrate that the present polarization model is capable of describing the structural properties (such as the relative conformational energies, intramolecular hydrogen bonds, and disulfide bonds) with accuracy comparable to some other polarizable force fields (ABEEM/MM and OPLS-PFF) and the quantum mechanics/molecular mechanics (QM/MM) hybrid model. The employment of fragment-centered dipole moments in calculations of dipole-dipole interactions can save computational time in comparison with those polarization models using atom-centered dipole moments without much loss of accuracy. The molecular dynamics simulations using the polarizable force field demonstrate that two single disulfide GI analogues are more flexible and less structured than the native alpha-conotoxin GI, in agreement with NMR experiments. The polarization effect is important in simulations of the folding/unfolding process of solvated proteins.     

Physical properties of small water clusters in low and moderate electric fields

Likely candidates for the lowest minima of water clusters (H(2)O)(N) for N ≤ 20 interacting with a uniform electric field strength in the range E ≤ 0.6 V/? have been identified using basin-hopping global optimization. Two water-water model potentials were considered, namely TIP4P and the polarizable Dang-Chang potential. The two models produce some consistent results but also exhibit significant differences. The cluster internal energy and dipole moment indicate two varieties of topological transition in the structure of the global minimum as the field strength is increased. The first takes place at low field strengths (0.1 V/? 10) usually forming helical structures.