Femtosecond time-resolved two-photon photoemission studies of electron dynamics in metals

Electron-hole excitation and relaxation in the bulk, at interfaces, and surfaces of solid state materials play a key role in a variety of physical and chemical phenomena that are important for surface photochemistry, particle-surface interactions, and device physics. Information on charge carrier relaxation in metals can be obtained through analysis of linewidths measured by photoemission and related techniques, which give an estimate of the upper limit for electron and hole relaxation; however, many factors can contribute to spectral broadening, thus it is difficult to extract specific information on electronic relaxation processes. With femtosecond lasers it is possible to probe directly in a time-resolved fashion the charge carrier dynamics in metals by a variety of linear and nonlinear optical techniques. Femtosecond time-resolved two-photon photoemission has attracted particularly strong interest because it incorporates many of the surface analytical capabilities of photoemission and inverse photoemission — the traditional probes for surface and bulk band structures of solid state materials — with time-resolution that is approaching the fundamental response of electrons to optical excitation. Advances in the direct measurements of electron-hole excitation, charge carrier relaxation, and dynamics of intrinsic and adsorbate induced surface states are reviewed. With femtosecond lasers it also is possible to probe a variety of coherent phenomena, and even to control the charge carrier dynamics in metals through the optical phase of the excitation light. Pioneering experiments in this new field also are discussed.     

Instantaneous vibrational frequencies of diffusing and desorbing adsorbates: CO/Pt(111)

Electronic excitation of metal by intense laser pulses stimulates nuclear motions of adsorbates through nonadiabatic coupling, resulting in diffusion and desorption of adsorbates. These processes take place via precursor states: adsorbates whose vibrational modes with respect to substrate are highly excited. This paper reports the dynamics of precursor states of CO on Pt(111) probed by use of infrared-visible sum frequency generation with phase-sensitive detection, which allows us to obtain the second-order nonlinear susceptibility and thus the vibrational response function. Without pump pulses at 400 nm, the inverse Fourier transformation of the vibrational response function reveals a free induction decay of vibrational polarization of C-O stretching created by a short infrared pulse. The free induction decay is perturbed when an intense 400-nm pump pulse following the infrared pulse is irradiated, because diffusion and desorption of CO are induced by the pump pulse. The time evolution of instantaneous C-O stretching frequency retrieved from the perturbed free induction decay shows a redshift followed by a rapid reverse shift when the fluence of pump pulse is high enough to desorb CO. This indicates that the frustrated modes of CO is first substantially excited and then the parallel momentum of CO is converted to the normal one through mutual collisions, leading to substantial excitation of the external stretching mode of CO.     

CO oxidation reaction on Pt(111) studied by the dynamic Monte Carlo method including lateral interactions of adsorbates

The dynamics of adsorbate structures during CO oxidation on Pt(111) surfaces and its effects on the reaction were studied by the dynamic Monte Carlo method including lateral interactions of adsorbates. The lateral interaction energies between adsorbed species were calculated by the density functional theory method. Dynamic Monte Carlo simulations were performed for the oxidation reaction over a mesoscopic scale, where the experimentally determined activation energies of elementary paths were altered by the calculated lateral interaction energies. The simulated results reproduced the characteristics of the microscopic and mesoscopic scale adsorbate structures formed during the reaction, and revealed that the complicated reaction kinetics is comprehensively explained by a single reaction path affected by the surrounding adsorbates. We also propose from the simulations that weakly adsorbed CO molecules at domain boundaries promote the island-periphery specific reaction.     

Two-photon photoemission spectroscopy study of 1,3-butadiene on Cu(111): electronic structures and excitation mechanism

The characteristics of 1,3-butadiene (C(4)H(6)) adsorbed on Cu(111) were investigated with temperature-programmed desorption (TPD) and two-photon photoemission spectroscopy (2PPE). Dosed at 90 K, the work function drops by 0.4 eV and TPD provides no evidence for dissociation, but there are four coverage-dependent local maxima located at 195, 135, 121, and 115 K. From the 2PPE spectra, three unoccupied electronic states of the C(4)H(6)-Cu(111) system were identified: the LUMO (pi(1)*, 2a(u)), LUMO + 1 (pi(2)*, 2b(g)), and LUMO + 2 (sigma*, 7b(u)), lying 1.3, 3.4, and 4.8 eV above the Fermi level, respectively. Although the excitation mechanisms for the LUMO and LUMO + 1 are substrate mediated, the excitation of the LUMO + 2 is attributed to intramolecular excitation.     

Femtosecond dynamics of Cu(CD3OD)

We report the femtosecond nuclear dynamics of Cu(CD3OD) van der Waals clusters, investigated using photodetachment-photoionization spectroscopy. Photodetachment of an electron from Cu-(CD3OD) with a 150 fs, 398 nm laser pulse produces a vibrationally excited neutral complex that undergoes ligand reorientation and dissociation. The dynamics of Cu(CD3OD) on the neutral surface is interrogated by delayed femtosecond resonant two-photon ionization. Analysis of the resulting time-dependent signals indicates that the nascent Cu(CD3OD) complex dissociates on two distinct time scales of 3 and 30 ps. To understand the origins of the observed time scales, complimentary studies were performed. These included measurement of the photoelectron spectrum of Cu-(CD3OD) as well as a series of calculations of the structure and the electronic and vibrational energies of the anion and neutral complexes. Based on the comparisons of the experimental and calculated results for Cu(CD3OD) with those obtained from earlier studies of Cu(H2O), we conclude that the 3 ps time scale reflects the energy transfer from the rotation of CD3OD in the complex to the dissociation coordinate, while the 30 ps time scale reflects the energy transfer from the excited methyl torsion states to the dissociation coordinate.     

Vibrational lineshapes of adsorbates: the role of substrate electronic excitations

The vibrational spectrum of an atom or molecule adsorbed on a metallic surface is influenced by the dynamic interaction between the localized oscillator and the continuum of electron-hole pair excitations in the solid. Features of an exactly soluble model for this interacting system are presented, the local spectral function is obtained in terms of calculable level shift and broadening functions, and some prototypical numerical results are displayed and discussed.     

Femtosecond study of Cu(H(2)O) dynamics

The short-time nuclear dynamics of Cu(H(2)O) is investigated using femtosecond photodetachment-photoionization spectroscopy and time-dependent quantum wave packet calculations. The Cu(H(2)O) dynamics is initiated in the electronic ground state of the complex by electron photodetachment from the Cu(-)(H(2)O) complex, where hydrogen atoms are oriented toward Cu. Several time-resolved resonant multiphoton ionization schemes are used to probe the ensuing reorientation and dissociation. Immediately following photodetachment, the neutral complex is far from its minimum energy geometry and possesses an internal energy comparable to the Cu-H(2)O dissociation energy and undergoes both large-amplitude H(2)O motion and dissociation. Dissociation is observed to occur on three distinct time scales: 0.6, 8, and 100 ps. These results are compared to the results of time-dependent J=0 wave packet calculations, propagating the initial anion vibrational wave functions on the ground-state potential of the neutral complex. An excellent agreement is obtained between the experimental results and the ionization signals derived from the calculated probability amplitudes. Related experiments and calculations are carried out on the Cu(D(2)O) complex, with results very similar to those of Cu(H(2)O).     

Cu单原子修饰对Fe(111)表面CO吸附性能及电子性质调变的第一性原理研究

采用密度泛函理论方法研究了Cu单原子修饰对Fe(111)表面CO吸附性能和电子性质的调变作用,其中,Cu单原子修饰研究了吸附和取代两种方式。结果表明,CO在Cu修饰的Fe(111)面吸附能力都会变弱,一是Cu原子自身提供的位点对CO的吸附较弱;二是Cu会使其附近的Fe对CO的吸附变弱。分析电子性质表明,Cu作用于Fe表面后,会导致Cu附近Fe原子部分电子向Cu原子转移,进而削弱了Fe与吸附分子间电子交互作用而改变Fe原子的吸附能力。故Cu原子改性Fe表面可以很好地调变CO的吸附、解离及后续反应催化活性,这为进一步探究Cu改性Fe表面的合成气催化反应机理提供了基础信息。     

Structure and dynamics of excited electronic states at the adsorbate/metal interface: C6F6/Cu(111)

Excited state electron transfer at the adsorbate/metal interface represents a key step in molecular electronic devices. The dynamics of such processes are governed by ultrafast energy relaxation which can be probed directly by time-resolved two-photon photoemission (2PPE). Using 2PPE spectroscopy we investigate the energetics and lifetimes of the unoccupied electronic states of C6F6 adsorbed on Cu(111) as a model system for electron transfer at organic/metal interfaces. With increasing C6F6 layer thickness we find a pronounced decrease in the energetic position of the lowest unoccupied state, which is accompanied by a strong increase in its lifetime as well as a decrease in the effective electron mass. The frequently employed dielectric continuum model which describes delocalized (quantum well) states within adsorbate layers does not give a consistent explanation of these findings. By adsorption of Xe overlayers onto C6F6/Cu(111) we can show that, even for one monolayer of C6F6, the excited state must be localized predominantly inside the C6F6 layer and thus originates from a molecular state (presumably an antibonding sigma* orbital). With increasing coverage this state becomes more delocalized within the adsorbate layer, which reduces the coupling to the metal substrate and thus enhances the excited state lifetime.     

Determination of band curvatures by angle-resolved two-photon photoemission in thin films of C60 on Ag(111)

The thickness-dependent interfacial band structure was determined for thin films of C(60) on Ag(111) by angle-resolved two-photon photoemission spectroscopy. Dispersions of molecular-orbital derived bands (HOMO, LUMO+1, and LUMO+2) were acquired, and limits were placed on their possible effective masses. A group theoretic approach is also incorporated to further understand the properties of these states. The HOMO, LUMO+1, and LUMO+2 bands possess (best-fit) effective masses of -7 m(e), -7 m(e), and -12 m(e), respectively. These values are consistent with theoretical calculations, averaged over the closely spaced subbands for each state, and provide practical limits on the effective fundamental charge-transport properties of C(60) films.     

Femtosecond dynamics of Cu(H(2)O)(2)

The ultrafast relaxation dynamics of Cu(H(2)O)(2) is investigated using femtosecond photodetachment-photoionization spectroscopy. In addition, stationary points on the Cu(H(2)O)(2) anion, neutral, and cation potential energy surfaces are characterized by ab initio electronic structure calculations. Electron photodetachment from Cu(-)(H(2)O)(2) initiates the dynamics on the ground-state potential energy surface of neutral Cu(H(2)O)(2). The resulting Cu(H(2)O)(2) complexes experience large-amplitude H(2)O reorientation and dissociation. The time evolution of the Cu(H(2)O)(2) fragmentation products is monitored by time-resolved resonant multiphoton ionization. The parent ion, Cu(+)(H(2)O)(2), is not detected above background levels. The rise to a maximum of the Cu(+) signal from Cu(-)(H(2)O)(2), and the decay of the Cu(+)(H(2)O) signal from Cu(-)(H(2)O)(2) have similar tau approximately 10 ps time dependences to the corresponding signals from Cu(-)(H(2)O), but display clear differences at very short and long times. The experimental observations can be understood in terms of the following picture. Prompt dissociation of H(2)O from nascent Cu(H(2)O)(2) gives rise to a vibrationally excited Cu(H(2)O) complex, which dissociates to Cu+H(2)O due to coupling of H(2)O internal rotation to the dissociation coordinate. This prompt dissociation removes all intra-H(2)O vibrational excitation from the intermediate Cu(H(2)O) fragment, which quenches the long time vibrational predissociation to Cu+H(2)O previously observed in analogous experiments on Cu(-)(H(2)O).     

Self-assembly of L-tryptophan on Cu(111) studied by low-temperature scanning tunneling microscopy

The self-assembly of L-tryptophan on Cu(111) is investigated by an ultrahigh vacuum scanning tunneling microscope (STM) at 4.4 K. A series of novel supramolecular structures have been prepared with different annealing temperatures.     

Self-assembly of l-tryptophan on Cu(111) studied by low-temperature scanning tunneling microscopy

The self-assembly of l-tryptophan on Cu(111) is investigated by an ultrahigh vacuum scanning tunneling microscope (STM) at 4.4 K. When deposited onto the substrate at around 120 K with a coverage of 0.1 monolayer, molecular trimers, tetramers, hexamers, and chains coexist on Cu(111). Then almost all molecules self-assemble into chiral hexamers after being annealed at room temperature. When increasing molecular coverage to the full layer, a new type of chain is observed on the surface. Based on the high-resolution STM images at sub-molecular level, we suggest that the l-tryptophan molecules are present in neutral, zwitterionic or anionic states in these structures.     

Charge transfer dynamics of 3,4,9,10-perylene-tetracarboxylic-dianhydride molecules on Au(111) probed by resonant photoemission spectroscopy

Charge transfer dynamics across the lying-down 3,4,9,10-perylene-tetracarboxylic-dianhydride (PTCDA) organic semiconductor molecules on Au(111) interface has been investigated using the core-hole clock implementation of resonant photoemission spectroscopy. It is found that the charge transfer time scale at the PTCDA∕Au(111) interface is much larger than the C 1s core-hole lifetime of 6 fs, indicating weak electronic coupling between PTCDA and the gold substrate due to the absence of chemical reaction and∕or bonding.     

Electron solvation and solvation-induced crystallization of an ammonia film on Ag(111) studied by 2-photon photoemission

Intermolecular interaction plays a crucial role in electron solvation in the condensed phase. Here, we present a femtosecond time-resolved and angle-resolved 2-photon photoemission (2PPE) study on the dynamics of electron solvation in a 2-dimensional ammonia film on a metal substrate. While the weakly chemisorbed first monolayer (ML) supports delocalized image-potential (IP) states that resemble those of the bare Ag(111) substrate, an additional monolayer localizes the IP state with a larger binding energy obtained through a pre-solvation process. Structural disorder in the metastable ammonia films (>2 ML) leads to a prominent photoelectron peak that is attributed to the long-lived trapped electron state (e(T)) located at 1.5 eV above the Fermi level. Photoinduced crystallization of the metastable phase, verified by the recovery of a delocalized IP state, is suggested to result from inelastic scattering between interfacial electrons and disordered ammonia molecules.     

Electron affinity levels of benzene and azabenzenes on Cu(111) and Au(110) revealed by inverse photoemission

We have studied the first two unoccupied molecular orbitals of benzene and s-triazine and the three lowest π levels of pyridine and pyrazine adsorbed on Cu(111) and Au(110) using inverse photoemission. We have found a close one-to-one correspondence for the affinity levels in the gas phase and after adsorption onto the metallic substrates with the adsorbates exhibiting a uniform Coulomb relaxation of about 1 eV. While the lowest affinity orbitals of pyridine, pyrazine and s-triazine are observed between 2.2 and 3.7 eV above the Fermi level E_F the e_2u orbital of benzene has been found at 4.6 eV on Cu(111) and at 4.8 eV on Au(110).     

Two-dimensional infrared surface spectroscopy for CO on Cu(100): detection of intermolecular coupling of adsorbates

Surface-specific infrared signals obtained by subjecting the system to two infrared laser pulses are calculated for an admixture of CO and isotopic CO on Cu(100) by using molecular dynamics simulation based on a stability matrix formalism. The two-dimensional profiles of the signals in the frequency domain show both diagonal and cross peaks. The former peaks mainly arise from the overtones of the CO and isotopic CO, while the latter represent the couplings between those. As temperature is increased, the phases of cross peaks in a second-order infrared response function change significantly, while those of diagonal peaks are unchanged. The authors show that the phase shifts are originated from the potential anharmonicities due to the electronic interaction between adsorbates. Using a model with two dipole moments, they find that the frustrated rotational mode activated with temperature has effects on the anharmonicity. These results indicate that two-dimensional infrared surface spectroscopy reveals the anharmonic couplings between adsorbates and surface atoms or between adsorbates which cannot be observed in first-order spectroscopy.     

A novel bonding geometry of CO on Cu(311) as determined by angle-resolved photoemission spectroscopy

Angle-resolved photoemission spectroscopy has revealed a previously unobserved bonding geometry for CO adsorbed on the Cu(311) surface. In this new bonding mode the CO molecular axis is parallel to the (311) plane and lies along the step direction.     

First-principles study on the adhesive and electronic property of c-BN(111)/Cu(111) interface

The interface properties of c-BN/Cu composite play an important role in its application. In this work, we employed first-principles calculation to investigate the bonding properties and electronic characteristics of the c-BN(111)/Cu(111) interface. The adhesion properties, partial density of states (PDOS), charge density, and charge density difference of different interfaces were analyzed. The results show that the interface of B-termination “OT” stacking mode is the most stable one. The density of states at the c-BN(111)/Cu(111) interface is similar to that of c-BN bulk phase, indicating that the electronic states of the c-BN layer are not affected by the Cu atoms. The PDOS diagram shows that the 2p orbital of B atoms and the 2p orbital of N atoms are hybridized in the c-BN layer. Besides, 2p orbital of B(N) atoms and 3d orbital of Cu atoms are hybridized in the interface. The covalent bonds and ionic bonds in the interface of N-termination and B-termination OT stacking mode structures are stronger than that of “SL” and “TL” stacking mode. So, the OT stacking mode has larger adhesive energy. Furthermore, Cu and c-BN can form a good coherent interface, which can be used to prepare c-BN/Cu composites and functional materials with excellent mechanical properties.     

Adsorbed structures of 4,4'-bipyridine on Cu(111) in acid studied by STM and IR

The adsorption of 4,4'-bipyridine (BiPy) on Cu(111) has been investigated in 0.1 M HClO4 by cyclic voltammetry, electrochemical scanning tunneling microscopy (STM), and surface-enhanced infrared adsorption spectroscopy (SEIRAS). Cyclic voltammetry showed the double layer region extending from -0.2 to 0.26 V and a pair of redox waves superposing on hydrogen evolution wave at more negative potentials. Diprotonated BiPy, BiPyH2(2+), is adsorbed flat on the Cu(111) (1 x 1) surface and forms a well-ordered monolayer with a (3 x 4) symmetry in the double-layer potential region. At more negative potential, BiPyH2(2+) is reduced to its monocation radical, BiPyH2(*+), and forms another well-ordered structure in which the radicals are stacked in molecular rows with a face-to-face self-dimer as the building unit. The SEIRA spectra of both BiPyH2(2+) and BiPyH2(*+) are dominated by gerade modes which should be IR-inactive for the centrosymmetric species. The breakdown of the selection rule of IR absorption is ascribed to the vibronic coupling associated with charge transfer between BiPyH2(2+) and the surface and between the radicals.