Hazard analysis of tetrahydrofuran and dimethylsulfoxide mixture solvents for efficient use in reaction processes

Organic solvents are often used in mixture solvent systems to optimize synthetic reactions. However, they may also produce unexpected effects, some of which may be hazardous and cause a runaway reaction and/or lead to an accident. Thus, the proper accident scenarios and thermal risk assessment models are needed to use mixture solvents more safely and efficiently. For chemical process safety, Stoessel suggests the systematic assessment of accident scenarios. However, if scenarios are changed by the properties of mixture solvents, Stoessel’s concept does not cover them. Our previous study evaluated characteristic scenarios of mixture solvents based on Stoessel’s model. In this study, as a characteristic scenario pattern, we focused on the energy release of the solvent and the material derived from degraded solvent and investigated them experimentally using tetrahydrofuran (THF) and dimethylsulfoxide (DMSO) as a representative mixture solvent. From hazard and scenario identification of THF and DMSO, we assumed that THF peroxide and DMSO play roles in energy release. THF containing peroxide and DMSO were mixed, and thermal analysis and chemical composition analysis were performed. Our results indicated that DMSO promotes the decomposition of THF peroxide, and the decomposition temperature of DMSO decreases upon mixing with degraded THF. Therefore, we verified the scenario pattern of energy release of solvent and the material derived from degraded solvent.     

Solute-solvent interactions in acid-base dissociation: nine protonated nitrogen bases in water-DMSO solvents

A titration method utilizing glass electrodes and silver-silver chloride electrodes in a cell without liquid junction has been used to determine the acidic dissociation constants at 15, 25, and 35°C of nine protonated nitrogen bases in mixtures of water and dimethyl sulfoxide (DMSO). The mole fraction of DMSO in the mixed solvents was 0.2, 0.4, 0.6, and 0.8. The cell was calibrated with HCl (molality=0.01 mole-kg^?1) in the mixed solvents, and the ionic strength and chloride molality remained substantially unchanged during the titration with added base. This method minimizes the errors resulting from the formation of AgCl ₂ ^? in the media rich in DMSO. The pK _a of all the protonated bases passes through a minimum at a solvent composition close to that at which H₂O-DMSO mixtures display a maximum solvent structure. The results are discussed in terms of the preferential solvation of ions by the two types of solvent molecules. They are consistent with the hypothesis that increased solvent structure is accompanied by increased desolvation of the cation acids.     

Thermochemical properties of 2,4-dinitroanisole in N-methyl pyrrolidone and dimethyl sulfoxide

The thermochemical properties of 2,4-dinitroanisole (DNAN) in N-methy pyrrolidone (NMP) and dimethyl sulfoxide(DMSO) were studied using a RD496-2000 Calvet microcalorimeter at four different temperatures. The heat effects were measured for DNAN dissolved in NMP and DMSO and the relationships between the heat effects and the amounts of the substance were determined. The molar enthalpies and the differential molar enthalpies of dissolution processes were also obtained from the experimental data. The corresponding kinetic equations describing the two dissolution processes at different temperatures were discussed.     

The role of cations in homogeneous succinoylation of mulberry wood cellulose in salt-containing solvents under mild conditions

The role of two cations [tetraethylammonium⁺ (TEA⁺) and tetrabutylammonium⁺ (TBA⁺)] in the homogeneous succinoylation of mulberry wood (MW) cellulose in dimethyl sulfoxide (DMSO)/tetraethylammonium chloride (TEACl) and DMSO/tetrabutylammonium fluoride (TBAF) was investigated using the intrinsic viscosity and two-dimensional nuclear Overhauser effect NMR spectroscopy (2D NOESY). The intrinsic viscosity of MW cellulose solution strongly depends on the salt dosage for both TEACl and TBAF, indicating that the increase in the hydrodynamic size of cellulose chains was caused by the interactions between salts and cellulose, which promotes the solvation process of cellulose in solution. Two-dimensional NOESY spectra reveal that cations bind to cellobiose in DMSO by the interactions between α-methylene groups of TEA⁺ (or TBA⁺) and C1/C1′ groups of cellobiose, and the intensities of the respective crosspeaks increase with increasing TEACl dosage from 5 to 10 mg/ml, but no change was present with TBAF at the same concentration range. Taking cellobiose as a model compound for cellulose, it can be expected that TEA⁺ (or TBA⁺) and cellulose form polyelectrolyte-like complexes. The degree of substitution (DS) of homogeneous succinoylation of MW cellulose benefits from the interactions between TEA⁺ (or TBA⁺) and cellulose evidenced by FT-IR spectra and CP/MAS ¹³C NMR spectra. The DS of the succinylated cellulose declines at TBAF concentrations higher than 11 wt% probably because of the steric hindrance effects of TBA⁺.     

Facile formation of stimuli-responsive,fluorescent and magnetic nanoparticles based on cellulose stearoyl ester via nanoprecipitation

In comparison to stimuli-responsive, multi-functional nanoparticles (NPs) from synthetic polymers, such NPs based on sustainable, naturally occurring polysaccharides are still scarce. In the present study, stable stimuli-responsive, fluorescent and magnetic NPs were fabricated using cellulose stearoyl esters (CSEs) consisting of cellulose and stearoyl groups. The multifunctional NPs with the average diameters between 80 and 250 nm were obtained after facile nanoprecipitation using CSE solutions containing Fe₃O₄-NPs. Using the aqueous solution of fluorescent rhodamine B as precipitant, NPs with rhodamine B on NP surface were obtained. Rhodamine B could be released depending on the temperature. In comparison, stearoylaminoethyl rhodamine B can be encapsulated in CSE-NPs, which renders obtained NPs reversible fluorescence in response to UV illumination and heat treatment.     

Quantitative estimation of the conditions of titrating hydroxyanthraquinones in nonaqueous solvents

In order to determine the optimum conditions of potentiometric titration, an investigation has been made of the relative acidities of 13-hydroxyanthraquinones in water, methanol, acetone (ac), dimethylformamide (DMFA), and dimethyl sulfoxide (DMSO) on the basis of a calculation of the indices of the relative acidity constants (pK_a) by Henderson's method. The existence of a relationship between pK_a in water and pK_a in acetone, dimethylformamide, and dimethyl sulfoxide has been established which is characterized by the linear equations $$pK_a^{DMSO} = 1.54pK_a^{H_2 O} + 11.88$$ , $$pK_a^{DMFA} = 1.38pK_a^{H_2 O} + 8.50$$ , $$pK_a^{ac} = 1.11pK_a^{H_2 O} + 10.26$$ . The sequence of neutralization of the hydroxyls in the titration of polyhydroxy-anthraquinones has been determined from the pK_a values in DMSO and the results of a calculation of electronic structures by the Pariser-Parr-Pople method. A quantitative evaluation of the conditions of titration in the five solvents on the basis of indices of the titration constants (pK_t) has shown that the optimum conditions for the quantitative determination by potentiometric titration are achieved in dimethyl sulfoxide.     

Impact of PS/SiO2 morphologies on the SERS activity of PS/SiO2/Ag nanocomposite particles

To understand the relationship between the morphology of carboxyl-functionalized polystyrene/silica (PS/SiO₂) nanocomposite microspheres and the surface-enhanced Raman scattering (SERS) performance of PS/SiO₂/Ag nanocomposite particles, core-shell and raspberry-like PS/SiO₂ composite microspheres were used as templates to prepare PS/SiO₂/Ag nanocomposite particles. The core-shell and raspberry-like structured PS/SiO₂ templates were prepared via in situ sol-gel reaction by hydrolysis tetraethyl orthosilicate (TEOS) in alkali solution. Silver nanoparticles (10–50 nm) were loaded on the PS/SiO₂ templates’ surface by chemical reduction. The morphology and structure of the PS/SiO₂/Ag particles were characterized by TEM, SEM, X-ray diffraction (XRD), and ultraviolet-visible (UV-vis) spectroscopy. Rhodamine 6G (R6G) was selected as a model chemical to study the enhancement performance of substrate constructed by PS/SiO₂/Ag nanocomposite. Results indicated that the PS/SiO₂/Ag nanocomposite prepared based on the core-shell templates showed higher SERS activity. The beneficial effect was associated with a lower specific area of core-shell structure and the larger average diameter of nanosilvers than that of the raspberry-like templates.     

A new synthesis of bicyclic N,O- and N,S-enaminals by the anionic cyclization of alk-4-ynals with amino alcohols and amino thiols

A reaction of alk-4-ynals with aliphatic amino alcohols or 2-aminoethanethiol in the system DMSO—KOH gives bicyclic N,O- and N,S-enaminals: 6-methylidenehexahydro-2H-pyrrolo[2,1-b][1,3]oxazines, 5-methylidenehexahydropyrrolo[2,1-b]oxazoles, or 5-methyl-idenehexahydropyrrolo[2,1-b]thiazoles. The reaction proceeds through the formation of equilibrium mixtures of the corresponding imines and monocyclic aminals with subsequent 5-exodig-cyclization catalyzed by the superbasic system DMSO-KOH.     

A direct hydrogen-1 and phosphorus-31 nuclear magnetic resonance cation solvation study of Al(ClO4)3, Ga(ClO4)3, In(ClO4)3, UO2(ClO4)2, and UO2(NO3)2 in water-acetone-dimethylsulfoxide and water-acetone-hexamethylphosphoramide mixtures

A competitive solvation study of Al(ClO₄)₃, Ga(ClO₄)₃, In(ClO₄)₃, UO₂(ClO₄)₂, and UO₂(NO₃)₂ in water-acetone-dimethylsulfoxide (DMSO) and water-acetone-hexamethylphosphoramide (HMPT) mixtures has been carried out by direct H¹ and P³¹ nuclear magnetic resonance (NMR) techniques. At low temperature, proton and ligand exchange are slow enough in these systems to permit the observation of signals for bulk and coordinated molecules of water and the organic bases (DMSO and HMPT). Both DMSO and HMPT compete effectively with water for coordination sites in the Al³⁺, Ga³⁺, and In³⁺ systems, with steric effects dominating the HMPT results. Both Al³⁺ and In³⁺ are able to bind a maximum of two to three HMPT molecules, for example. In contrast, UO²⁺ is solvated selectively by the organic molecules to the allowed maximum of 4 molecules per cation. H¹ and P³¹ NMR spectral results support the formation of only the mono-, tri-, and tetra-HMPT solvation complexes.     

Microwave synthesis of secondary phosphines and phosphine oxides from red phosphorus and allyl(methoxy)benzenes in KOH-DMSO

Bis[1-(methoxyphenyl)propan-2-yl]phosphines and bis[1-(methoxyphenyl)propan-2-yl]phosphine oxides were synthesized by phosphorylation of allyl(methoxy)benzenes in the system red phosphorus-KOH · 0.5 H₂O-DMSO under microwave irradiation.     

Heat of reaction and curing of epoxy resin

The heat of reaction and kinetics of curing of diglycidyl ether of bisphenol-A (DGEBA) type of epoxy resin with catalytic amounts of ethylmethylimidazole (EMI) have been studied by differential power-compensated calorimetry as a part of the program for the study of process monitoring for composite materials. The results were compared with those from 1∶1 and 1∶2 molar mixtures of DGEBA and EMI. A method of determination of heat of reaction from dynamic thermoanalytical instruments was given according to basic thermodynamic principles. The complicated mechanism, possibly involving initial ionic formation, has also been observed in other measurements, such as by time-domain dielectric spectroscopy. The behavior of commercially available DGEBA resin versus purified monomeric DGEBA were compared. The melting point of purified monomeric DGEBA crystals is 41.4 °C with a heat of fusion of 81 J/g. The melt of DGEBA is difficult to crystallize upon cooling. The glass transition of purified DGEBA monomer occurs around ?22 °C with aΔC _p of 0.60 J/K/g.     

Bromo dimethyl sulfoxide osmium(II) complexes. Molecular structure of cis,fac-[OsBr2(dmso-S)3(dmso-O)]

Bromo dimethyl sulfoxide osmium(II) complexes were synthesized: trans-[OsBr₂(dmso-S)₄] (1) was obtained by the reaction of K₂[OsBr₆] with DMSO in the presence of SnBr₂ at 100°C and cis,fac-[OsBr₂(dmso-S)₃(dmso-O)] (2) was prepared by thermal isomerization of 1 in a DMSO solution at 150°C. The coordination mode of DMSO molecules was determined by IR and ¹H and ¹³C NMR spectroscopy. X-ray diffraction analysis showed that compound 2 crystallizes in the monoclinic system, space group P2₁/n; a = 8.4711(5) Å, b = 27.7876(15) Å, c = 8.5569(5) Å, β = 115.7110(10)°; Z = 4. The coordination polyhedron of osmium is a distorted octahedron; the osmium environment is formed by two cis-arranged bromine atoms and three fac-S-coordinated and one O-coordinated DMSO molecules. The interconversion of complexes in solutions was studied by UV/Vis and ¹H and ¹³C NMR spectroscopy. In chloroform and DMSO, complex 2 isomerizes to cis-[OsBr₂(dmso-S)₄] and (in the light) to 1. The complexes trans-[OsX₂(dmso-d₆)₄], where X = Cl, Br, were isolated from DMSO-d ₆ and characterized by the IR spectra.     

Dehydrogenation of 4-aryl(hetaryl) spinacine derivatives with dimethyl sulfoxide

Aromatization of 4-aryl(hetaryl)tetrahydroimidazo[4,5-c]pyridine-6-carboxylic acids and their lithium salts by the action of dimethyl sulfoxide has been revealed for the first time. Heating of these compounds in DMSO for 5–7 h at 90–95°C leads to the formation of 4-aryl(hetaryl)imidazo[4,5-c]pyridine derivatives as a result of dehydrogenation and decarboxylation. Heating of the corresponding lithium salts generated in situ (DMSO, 90–95°C, 3–5 h) affords difficultly accessible 4-aryl(hetaryl)imidazo[4,5-c]pyridine-6-carboxylic acids.     

Structural and thermal properties of HDPE/n-AlN polymer nanocomposites

High-density polyethylene (HDPE) containing various volume fractions (0–20 vol%) of aluminum nitride nanoparticles (n-AlN) is prepared by melt mixing. Structural and morphological characterizations of the prepared composites are carried out by X-ray diffraction (XRD), high-resolution transmission electron microscopy (HR-TEM), and atomic force microscopy (AFM). Thermal stability and degradation kinetics of HDPE/AlN (nano) composites are investigated by Thermogravimetric analysis (TG). HR-TEM micrographs confirm fairly uniform dispersion of AlN nanoparticles, as well as the existence of long interconnected chain-like aggregates. AFM images also confirm homogeneous dispersion of n-AlN in the polymer matrix. Roughness analysis from the AFM data indicates the presence of substantial undulation from the mean surface level. Thermogravimetric data indicate small improvement in the thermal stability of the composites. Kinetic parameters, viz., the activation energy (E _a), frequency factor (A), and reaction order (n) are estimated using the isoconversional methods of Kissinger, Flynn–Wall–Ozawa (FWO), KAS, and Friedman. Activation energies (E _a) calculated by the above four models display nearly similar features and are enhanced by the presence of AlN nanoparticles. Kinetics of degradation of HDPE-AlN (nano) composites follows a first-order reaction.     

On synthesis of Fe2SiO4/SiO2 and Fe2O3/SiO2 composites through sol–gel and solid-state reactions

Major processing factors in forming Fe₂SiO₄/SiO₂ and Fe₂O₃/SiO₂ powders via sol–gel synthesis followed by solid-state reactions are investigated. The results clearly indicate that the chemical compositions of the precursors, the ratio of the precursors, the nature of the catalyst used, and the gas atmosphere during solid-state reactions can all affect the outcome of the reaction product(s). The formation of Fe₂SiO₄/SiO₂ is enhanced by using the precursor iron(III) acetylacetonate as the Fe source with the precursor ratio of iron(III) acetylacetonate to tetraethyl orthosilicate being 1:1 and the addition of formic acid. Otherwise, crystalline Fe and Fe₃C are formed in place of Fe₂SiO₄. By altering the gas atmosphere during solid-state reactions from argon to oxygen, the reaction products change from Fe₂SiO₄/SiO₂ to Fe₂O₃/SiO₂. All of the observed phenomena can be rationalized via the degree of mixing of the Fe–O and Si–O domains at the molecular level in the gel network during sol–gel reactions and the presence of a reducing or oxidizing atmosphere during the solid-state reaction.     

Influence of the bridging coordination of DMSO on the exchange interaction character in the binuclear copper(II) complex with the nonsymmetrical exchange fragment

The binuclear copper(II) complex [Cu₂L(CH₃COO)] (I), where L^3? is the azomethine trianion based on 3-methyl-4-formyl-1-phenylpyrazol-5-one and 1,3-diaminopropan-2-ol, and its DMSO adduct (II) in which the DMSO molecule acts as an additional bridging ligand are synthesized. The structure of complex II is determined by X-ray diffraction analysis, and the structure parameters of the coordination unit of complex I are determined by EXAFS spectroscopy. The μ²-coordination of the DMSO molecule in compound II results in a change in the sign of the exchange interaction parameter. In complex I, the antiferromagnetic exchange interaction (2J = ?169 cm^?1) occurs between the copper(II) ions. The exchange interaction of the ferromagnetic type (2J = 174 cm^?1) is observed in complex II. The quantum-chemical calculations of the magnetic exchange parameters by the density functional theory method show that the role of the DMSO molecule as a switch of the exchange interaction character is exclusively the stabilization of the “broken” conformation of the metallocycles.     

A photoionization study of the van der Waals molecule C2H4 · HCl

The dissociation energy of the C₂H₄ · HCl van der Waals complex was determined to be 3.18±0.73 kcal mol^?1 by a dissociative photoionization technique. C₂H₄ · HCl was produced by free expansion of a 1:4 mixture of C₂H₄ in HCl and the clusters were ionized with tunable synchrotron radiation. The photoionization efficiency function of (C₂H₄ · HCl)⁺ from C₂H₄ · HCl was determined between 600 and 1,300 Å and the onset for (C₂H₄ · HCl)⁺ was established as 1,163±2 Å = 10.66±0.02 eV; these values give ΔH _f ⁰ (C₂H₄ · HCl) = ?10.7±0.7 kcal mol^?1 and ΔH _f ⁰ (C₂H₄·HCl⁺)=235.1±0.9 kcal mol^?1. A complex ion dissociation energyD ₀(C₂H₄ · HCl⁺) = ?0.3±0.9 kcal mol^?1 was calculated from the results. The major features on the PIE curve for C₂H₄ · HCl⁺ can be analyzed in terms of the known energetic features of C₂H ₄ ⁺ and HCl. An extended energy diagram for the C₂H₄ + HCl system is presented.     

Thermal decomposition of polymethylmethacrylate synthesized with anionic catalysts

TG and DTA data are used to show that the thermal decomposition of polymethylmethacrylate (PMMA) synthesized with anionic catalysts depends on the nature of the catalyst. It is found that the thermal stability of PMMA obtained by using anionic amide catalysts is higher than that of radical PMMA and of PMMA obtained with other anionic catalysts, and depends on the temperature of polymerization and on the molecular weight of the polymer.     

Effect of Cl substituent in the aromatic tetracycline ring on its reactivity with solvated electrons

Decomposition yields of tetracycline hydrochloride /TC.HCl/ and chlorotetracycline hydrochloride /ClTC?HCl/ in methanol solution saturated with Ar or N₂O were determined. Rate constants of the reaction e_s with some antibiotics were obtained: $$\begin{gathered} k/e_s^ - + ClTC \cdot HCl/ = 2 \cdot 49 \times 10^8 dm^3 \cdot mole^{ - 1} \cdot s^{ - 1} ; \hfill \\ k/e_s^ - + TC \cdot HCl/ = 2 \cdot 86 \times 10^8 dm^3 \cdot mole^{ - 1} \cdot s^{ - 1} \cdot \hfill \\ \end{gathered} $$ On the basis of the diffence between decomposition yields: ΔG=G_?TC.HCl^?G?ClTC.HCl′ 7-C?Cl group decomposition yield and the rate constant $$k/e_s^ - + Cl - C - 7/ = 7 \cdot 94 \times 10^8 dm^3 \cdot mole^{ - 1} \cdot s^{ - 1} $$ were determined. It was demonstrated by¹H NMR that the radical formed by degradation of 7-C?Cl group is recombined with the H atoms leading to ClTC.HCl being converted into tetracycline hydrochloride /TC.HCl/.