Thermodynamic Properties of Alanylpeptide Buffer Systems and Their Potential as Standards in Biological Applications

The second dissociation constants pK ₂of the NH₃ ⁺charge center of the alanylpeptides, alanylglutamine (Ala–Gln), alanylleucine (Ala–Leu), alanylglycine (Ala–Gly), and DL-alanyl–DL-methionine (DL-Ala–DL-Met) were determined at ten temperatures in the range, 5–50°C. These pK ₂values were calculated from the emf of cells containing buffer solutions of these dipeptides. A cell of the type described by Harned and Ehlers,⁽¹⁾utilizing hydrogen and silver–silver bromide electrodes was used. The thermodynamic quantities, H^o, S^o, and C_p ^owere derived from the temperature coefficients of the dissociation constants. The pK ₂values at 25°C, 8.2105 ( Ala–Gln), 8.2668 ( Ala–Leu), 8.2940 ( Ala–Gly), and 8.3054 ( DL-Ala–DL-Met). These values show that different substituent groups on the -carbon atom (which include polar and nonpolar groups), have a small effect on the dissociation of the NH₃ ⁺charge center. These compounds were also found to be suitable as buffers in the pH range(7–9). The thermodynamics of the solute–solvent interaction is interpreted in terms of the mixture model.⁽²⁾     

Dissociation quotients of succinic acid in aqueous sodium chloride media to 225°C

The first and second molal dissociation quotients of succinic acid were measured potentiometrically with a hydrogen-electrode, concentration cell. These measurements were carried out from 0 to 225°C over 25° intervals at five ionic strengths ranging from 0.1 to 5.0 molal (NaCl). The dissociation quotients from this and two other studies were combined and treated with empirical equations to yield the following thermodynamic quantities for the first acid dissociation equilibrium at 25°C: log K_1a=–4.210±0.003; H _1a ⁰ =2.9±0.2 kJ-mol^–1; S _1a ⁰ =–71±1 J-mol^–1-K^–1; and C _p1a ⁰ =–98±3 J-mol^–1-K^–1; and for the second acid dissociation equilibrium at 25°C: log K_2a=–5.638±0.001; H _2a ⁰ = –0.5±0.1 kJ-mol^–1; S _2a ⁰ =–109.7±0.4 J-mol^–1-K^–1; and C _p2a ⁰ = –215±8 J-mol^–1-K^–1.     

Calorimetric determination of thermodynamic quantities for chemical reactions in the system CO2−NaOH−H2O from 225 to 325°C

The phase equilibrium CO₂(g)=CO₂(aq) and the aqueous reactions CO ₃ ^2– +H⁺=HCO ₃ ^– , HCO ₃ ^– +H⁺=CO₂(aq)+H₂O, and Na⁺+CO ₃ ^2– =NaCO ₃ ^– were studied from 225 to 325°C using a flow calorimetric technique. Heats of mixing of gaseous CO₂ with liquid H₂O and with aqueous NaOH solutions were measured at these temperatures. Log K, H, S, and C_p values were determined for these reactions from the heat of mixing data. Equations for these thermodynamic quantities valid at infinite dilution (I=0) and 12.4 MPa are given as a function of temperature from 225 to 325°C. The log K and H values agree well with literature values at these temperatures for the first and third reactions, but not for the second reaction. No previous results have been reported for the fourth reaction at high temperatures. The isocoulombic reaction principle is tested using the log K values determined in this study. This principle is found to be valid for the reactions where each charge on one side of the equation is balanced on the other side by a charge of the same sign and magnitude, but not for the reaction where two single negative charges (HCO ₃ ^– and OH^–) are balanced by one double negative charge (CO ₃ ^2– ).Presented at the Second International Symposium on Chemistry in High Temperature Water, Provo, UT, August 1991.Taken in part from the Ph.D. Dissertation of X. Chen, Brigham Young University, 1991.     

Partial molal heat capacity of aqueous ferrous chloride from measurements of integral heats of dilution

Heats of dilution of concentrated aqueous solutions (4.43 moles-kg^–1) of FeCl₂ were measured at 15, 25, and 35°C. The heat capacities of these concentrated solutions were also measured at the same temperatures. From these data the partial molal heat capacity, C _p2 ⁰ (FeCl₂, aq, 298.15°K)=–2.56±30 J–°K^–1–mole^–1, was calculated. The partial molal heat capacity of Fe²⁺(aq), –2±30 J-°K^–1-mole^–1, was correlated with the correspondence principle equations of Criss and Cobble.     

Dissociation quotients of oxalic acid in aqueous sodium chloride media to 175°C

The first and second molal dissociation quotients of oxalic acid were measured potentiometrically in a concentration cell fitted with hydrogen electrodes. The emf of oxalic acid-bioxalate solutions was measured relative to an HCl standard solution from 25 to 125°C over 25^o intervals at nine ionic strengths ranging from 0.1 to 5.0 molal (NaCl). The molal dissociation quotients and available literature data were treated in the all anionic form by a five-term equation that yielded the following thermodynamic quantities at infinite dilution and 25°C: logK_1a=–1.277±0.010, H _1a ^o =–4.1±1.1 kJ-mol^–1, S _1a ^o =38±4 J-K^–1-mol^–1, and C _p,1a ^o =–168±41 J-K^–1-mol^–1. Similar measurements of the bioxalate-oxalate system were made at 25^o intervals from 0 to 175°C at seven ionic strengths from 0.1 to 5.0m. A similar regression of the experimentally-derived and published equilibrium quotients using a seven-term equation yielded the following values at infinite dilution and 25°C: logK_2a=–4.275±0.006, H _2a ^o =–6.8±0.5 kJ-mol^–1, S _2a ^o =–105±2 J-K^–1-mol^–1, and C _p,2a ^o =–261±12 J-K^–1-mol^–1.     

Electrosurface and Ion-Selective Properties of Track-Etched Nanofilters: The Effect of Polyvalent Metal Adsorption

The effect of polyvalent metal adsorption on the performance and ion selectivity of poly(ethylene terephthalate) track-etched membranes with pores of 10 nm in diameter was studied. Membrane samples were prepared from the track-etched membranes with pores of 20 nm in diameter by thermal shrinkage. It was shown that an effective pore diameter decreases and selectivity of track-etched membranes increases upon filtration of Al(NO₃)₃ and Cr(NO₃)₃ solutions. The results obtained are explained by ion adsorption leading to the formation of complexes between polyvalent metals and carboxyl groups on the pore surface that is confirmed by IR spectroscopy data. The study of electrosurface properties of modified membranes and the dependence of ion selectivity of track-etched membranes on the concentration of Al³⁺ ions in 10^–2 M KCl solution indicates the decrease of membrane negative surface charge resulted from Al³⁺ adsorption and membrane charge reversal at Al³⁺ concentration in a solution higher than 10^–6 M. The dependences of the ion selectivity on pH and Al³⁺ concentration C _Al in a solution are similar. At pH < 3 and C _Al > 10^–6 M, the _1–2 > _1–1 > _2–1 ion selectivity series characteristic of the initial negatively charged membranes for the 1–1, 1–2, and 2–1 electrolyte solutions is reversed into the _2–1 > _1–1 > _1–2 series characteristic of positively charged membranes.     

Nature of the Chemical Bond and the Mutual Influence of Ligands in Co(III) Dioximinates

The results of MWG calculations of the electronic structures of real Co(III) complexes [Co(HD)₂L¹L²] ⁿ were used to analyze the electron density distribution and to determine the charges on atoms and configurations, where nis the charge of the complex and HD is the acid residue of dimethylglyoxime (H₂D); L¹= NH₃at L²= NH₃, Cl^–, Br^–, or I^–and L¹= L²= Cl^–; and L¹= H₂O or NO^– ₂at L²= NO^– ₂, with self-consistency over all atoms of the system and over d, s, and pconfigurations of cobalt. The mutual influence of the ligands (trans- and cis-) was shown to be determined by the atomic charges and bond orders on the axial coordinate and in the equatorial plane of the complex. The following order of the trans-effect was proposed: I^–> Br^–> Cl^–> NO^– ₂> NH₃> H₂O. The effects of the electronic factors on distorsion and conformational processes in the complexes were discussed.     

Dissociation quotients of malonic acid in aqueous sodium chloride media to 100°C

The first and second molal dissociation quotients of malonic acid were measured potentiometrically in a concentration cell fitted with hydrogen electrodes. The hydrogen ion molality of malonic acid/bimalonate solutions was measured relative to a standard aqueous HCl solution from 0 to 100°C over 25° intervals at five ionic strengths ranging from 0.1 to 5.0 molal (NaCl). The molal dissociation quotients and available literature data were treated in the all anionic form by a seven-term equation. This treatment yielded the following thermodynamic quantities for the first acid dissociation equilibrium at 25°C: logK _1a =-2.852±0.003, H _1a ^/o =0.1±0.3 kJ-mol^–1, S _1a ^o =–54.4±1.0 J-mol^–1-K^–1, and C _p,1a ^o =–185±20 J-mol^–1-K^–1. Measurements of the bimalonate/malonate system were made over the same intervals of temperature and ionic strength. A similar regression of the present and previously published equilibrium quotients using a seven-term equation yielded the following values for the second acid dissociation equilibrium at 25°C: logK_2a=–5.697±0.001, H _2a ^o =–5.13±0.11 kJ-mol^–1, S _2a ^o =–126.3±0.4 J-mol^–1-K^–1, and C _p,2a ^o =–250+10 J-mol^–1-K^–1.Presented at the Second International Symposium on Chemistry in High Temperature Water, Provo, UT, August 1991.     

Pseudohalogen compounds of astatine: Synthesis and characterization of At/I/-tricyanomethanide-and At/I/-azide-compounds

Reactions of At//⁺, At^o.H₂O, AtCl ₂ ^– and AtBr₂ with the pseudohalogenides tricyanomethanide and azide are described. Information on the compound formation of astatine with C/CN/ ₃ ^– and N ₃ ^– could be obtained on the basis of electromigration investigations under variation of the conditions /composition of the electrolyte, pH, exchange reactions of ligands/. For the reaction: [At/H₂O/C/CN/₃]+C/CN/ ₃ ^– [At/C/CN/₃/₂]+H₂O at 301 K and u=0.075 mol.l^–1 K₂=/675±25/ [1.mol^–1] and u^o=–/3.50±0.10/×10^–4 [cm².s^–1.V^–1]. According to this astatine/I/-tricyanomethanide is classified between AtI ₂ ^– and At/SCN/ ₂ ^– . First investigations in azid-containing systems confirm the formation of astatine/I/-azide-compounds. Their composition is probably At/N₃/ ₂ ^– . There is no dependence of the ion mobility of astatine/I/-azide in the investigated range on azide concentration which is due to its high stability.     

Thermodynamics of aqueous gallium chloride. Apparent molar volumes and heat capacities at 25°C

Apparent molar volumes and heat capacities of aqueous GaCl₃ have been measured at 25°C in binary GaCl₃ solutions up to 3 mol-kg^–1, and in ternary GaCl₃-HCl solutions, containing 0.1345 mol-kg^–1 HCl to suppress hydrolysis, up to a concentration of 1 mol-kg^–1 GaCl₃. Using the Pitzer interaction model for the excess properties, and using ridge regression for the derivation of physically meaningful regression parameters, the measurements yield the following results for the standard molar properties and Pitzer parameters at 25°C: V⁰(GaCl₃)=12.85 cm³-mol^–1; ₀ ^v (GaCl₃)=1.10×10^–4 kg-mol^–1–J^–1–cm^–3; _v ¹ (GaCl₃)=2.12×10^–3 kg–mol^–1–J^–1–cm³; Cv(GaCl₃)=1.34×10^–5 kg²–J^–1–cm³; V^o(GaOHCl₂)=13.84 cm³–mol^–1; C _o ^p (GaCl₃)=–480.8 J–K^–1–mol^–1; _J ⁰ (GaCl₃)=–8.02×10^–6 kg–mol^–1–K^–2; _J ¹ (GaCl₃)=0.73×10^–4 kg–mol^–1–K^–2; C_J(GaCl₃)=–2.52×10^–6 kg²-mol^–2-K^–2; C _p ⁰ (GaOHCl₂)=20.4 J-K^–1-mol^–1. The latter parameter has only mathematical significance, its physical meaning is unclear. Comparison of the present experimental results for the standard molar properties of Ga³⁺ with semi-empirical correlations casts doubt upon the general validity of these correlation methods for trivalent cations.     

Binding constants of calcium and/or magnesium electrolytes and aggregation numbers in oil-in-water type microemulsions formed by an amphoteric surfactant

The effects of anti-symmetric electrolytes (CaCl₂, Ca(SCN)₂, MgCl₂, and/or Mg(SCN)₂) and pH on the phase behavior, the -potential, the hydrodynamic diameter and the surface charge density of an oil-inwater type (O/W-type) microemulsion formed in solutions of an amphoteric surfactant (N ,N -dimethyl-N -lauroyllysine, DMLL)/n-octane/1-pentanol/brine have been examined. The formation of the microemulsion in the presence of CaCl₂ and/or Ca(SCN)₂ is of Winsor-type with an increase in the concentration of 1-pentanol. Particularly, microemulsion is not formed by the addition of Ca(SCN)₂ in a pH region less than 2.6. The -potential and the surface charge density of the microemulsion in the presence of CaCl₂ decrease with an increase in pH and show slightly positive values in the isoelectric region (pH 5-7), while, in the presence of Ca(SCN)₂, the -potential and the surface charge density show negative values in the same region at which the net charge of DMLL molecules becomes almost zero. The hydrodynamic diameters in the presence of CaCl₂ show a maximum value around pH 2.5, whereas, in the presence of Ca(SCN)₂, the minimum value is around pH 5.5. Similar tendencies are recognized in results for the -potential, the hydrodynamic diameter and the surface charge density of the O/W-type microemulsion in the presence of MgCl₂ and Mg(SCN)₂. A new formula to estimate the binding constants (K) of Ca²⁺, Mg²⁺, Cl^–, and SCN^– to the hydrophilic groups in DMLL molecules and the adsorption density of DMLL molecules on the oil/water interface (N) in the presence of antisymmetric electrolytes has been derived.K for Ca²⁺, Mg²⁺, Cl^–, and SCN^– was found to beK _Ca=0.12M^–1,K _Mg=0.14 M^–1,K _Cl=0.0084±0.0016 M^–1, respectively.N for DMLL molecules in the presence of CaCl₂, Ca(SCN)₂, MgCl₂ and/or Mg(SCN)₂ was found to be 0.50 nm^–2, 0.38 nm^–2, 0.44 nm^–2, and 0.47 nm^–2, respectively; and the surfactant (DMLL) numbers per O/W-type microemulsion droplet change from a few hundreds to a few thousands with changing pH. The larger the hydrodynamic diameter of the O/W-type microemulsion, the greater the number of DMLL molecules adsorbed on the O/W-type microemulsion surfaces.     

UV-Visible and IR Spectroelectrochemical Studies of FeVO4 Sol-Gel Films for Electrochromic Applications

The sol-gel synthesis route, in combination with dip-coating deposition, was used for the preparation of FeVO₄ films. TEM measurements of Fe/V (1 : 1)-oxide films heated at 400°C reveal that the films consist of a triclinic FeVO₄-I and an orthorhombic FeVO₄-II phases with a grain size of up to 50 nm. The electrochromic properties of the films were tested in 1 M LiClO₄/propylene carbonate (PC) using various electrochemical techniques and in-situ UV-visible spectroelectrochemical measurements. The best compromise between the charge capacity per film thickness (Qd^–1 = –0.14 mC cm^–2 nm^–1), electrochemical stability (>1000 cycles) and optical modulation (T_vis = 0.15) was achieved in the potential range of 4.80 to 1.80 V vs. Li, which suggests that FeVO₄ films can be used as counter-electrodes in electrochromic devices.Extensive IR-spectroscopy studies of FeVO₄ films in charged/discharged states revealed the following spectra changes: (i) small charging (–0.01 mC cm^–2 nm^–1) leads to a variation in the intensity of all the vibrational bands without shifting their frequencies, (ii) higher chargings bring about the intensity and frequency changes of bridging V—O···Fe and V···O···Fe stretchings showing that vanadium, and probably also iron, are involved in the insertion/extraction processes, (iii) below 500 cm^–1 broad absorption appears due to the Li⁺—O modes, which also remained in the IR spectra of discharged (bleached) states revealing the irreversible lithiation, and (iv) charging to –0.30 and –0.50 mC cm^–2 nm^–1 leads to the amorphisation of the film structure.     

Multinuclear macromolecule metal complexes 2. Preparation and characterization of Prussian blue and its analogs bonded to pofy(vinylamine hydrochloride)

Prussian blue and its analogs bonded to poly(vinylamine hydrochloride) (PVAm · HCl) containing Fe^II or Fe^III and M²⁺ (M=Fe, Co, Cu) in a 11 molar ratio were obtained by the reaction of [Fe(CN)₆] ^n– (n=3,4) with M²⁺ ion-PVAm · HCl mixture in aqueous solution. Under a limited polymer concentration (T_VAm/T_Fe over 10), these polymer complexes thus obtained were stable and soluble in water. By casting these solutions, colored films can be produced. The formation of Prussian blue and its analogs bonded to PVAm · HCl was also investigated by the Benesi-Hildebrand method. The molar extinction coefficients of intervalence charge transfer (Fe^IIFe^III, Co^IIFe^III, Fe^IICu^II) band for MFe(CN)₆]^(n–2)– bound to PVAm · HCl (M=Fe, Co, Cu) were found to be 10,100–9601 · mol^–1 · cm^–1 at 25 C. The formation constants were found to be in the range of 10⁷ to 10¹⁰ M^–1. The changes of enthalpy (H) and entropy (S) were found to be in the range of –10.4 to –22.5 kJ · mol^–1 and 5.7 to 52.9 J · K^–1 mol^–1 respectively, at 25C.     

Heat capacities of concentrated multicomponent aqueous electrolyte solutions at various temperatures

The specific heat capacities of the aqueous multicomponent system NaCl +KCl+MgCl₂+CaCl₂ with ionic strength between 8.3 and 9.6 (resembling Dead Sea waters) were measured between 15°C and 45°C. The obtained data were fitted to an empirical equation as a function of concentration and temperature. The thermodynamic functions of the studied multicomponent system were found to be strongly influenced by changes in MgCl₂ concentrations. The application of Young's rule to such concentrated systems was checked at 25°C. The calculated (by Young's rule) specific heat capacitiesC _p and apparent molar heat capacities C_p, of these multicomponent electrolyte solutions were in reasonable agreement with the measured values (–0.008 J-g^–1-K^–1 and –2.6 J-mol^–1-K^–1, respectively).     

IR-Spektren des p-Methylbenzamidoxims

Zusammenfassung Die IR-Spektren des p-Methylbenzamidoxims (pMB), des O-Benzoyl-pMB und des deuteriertenpMB (ND₂, OD) wurden in festem Zustand und in Lösung untersucht. Die Moleküle der festen und der gelösten Verbindungen sind durch Wasserstoffbindungen O–H...O verbrückt. Die Absorption der Valenzschwingungen der NH₂-Gruppe liegt im Bereichv _as=3505–3520 cm^–1,v _s=3370–3416 cm^–1. Die Valenzschwingungen der freien OH-Gruppe sind bei 3620 cm^–1 (in CCl₄), die der verbrückten OH-Gruppen—bei 3160–3280 cm^–1. Die KraftkonstantenF _NH, der N–H-Abstand und die Änderung der Positivladung am Stickstoffatom q wurden aus den IR-Daten berechnet.

---

IR-spectra of p-methyl benzamidoxime

The IR-spectra of p-methyl benzamidoxime (pMB), O-benzoyl-pMB and deuteratedpMB (ND₂, OD) were studied in the solid state and in solution. The molecules of the solid and of the dissolved compounds are bridged by hydrogen bondings O–H...O. The absorption of the valence vibrations of the group NH₂ are found to be in the rangev _as=3505–3520 cm^–1 andv _s=3370–3416 cm^–1. The valence vibrations of the free OH-group are found to be at 3620 cm^–1 (in CCl₄) and those of the bridged OH-groups at 3160–3280 cm^–1. The force constantsF _NH, the distance between the atoms N–H, and the change of the positive charge of the nitrogen atom q were calculated from IR-data.

     

Kinetics and mechanism of base hydrolysis oftrans-bis(Hmalonato)bis(ethylenediamine)cobalt(III) ion

Summary The kinetics of the first step of base hydrolysis oftrans-bis(Hmalonato)bis(ethylenediamine)cobalt(III) [malH^–=HO₂CCH₂CO ₂ ^– ] has been investigated in the 15–35° C range, I=0.3 mol dm^–3 (NaClO₄) and [OH^–]=0.015–0.29 mol dm^–3. The rate law is given by –d In[complex]_T/dt=k₁[OH^–] and at 30° C, k₁=8.5×10^–3 dm³ mol^–1s^–1, H=117.0±7.0 kJ mol^–1 and S=99.0±24.0 JK^–1mol^–1. The activation parameters data are consistent with the SN₁ cb mechanism.     

The first ionization constant from 25 to 200°C and 2000 bar for orthophosphoric acid

The ionization constant of orthophosphoric acid, determined by conductivity measurements, decreased from 7.11×10^–3 at 25°C to 6.2×10^–4 mol-kg^–1 at 200°C. The pressure effect to 2000 bar was also measured and the ratio K₂₀₀₀/K₁ is 2.7 at 25°C and 3.7 at 200°C. The standard partial molar volume change for the ionization at 1 bar, , changes from –16.1 at 25°C to –33.3 cm³-mol^–1 at 200°C. The partial molar compressibility change for the ionization, , varies from –3.8×10^–3 to –8.3×10^–3 cm³-mol^–1 bar^–1 over the same temperature range.     

Kinetics and mechanism of the acid-catalyzed hydrolysis of [carbonatoethylenediamine(L)2cobalt(III)]+ ions

The kinetics of acid-catalyzed hydrolysis of the [Co(en)(L)₂(O₂CO)]⁺ ion (L = imidazole, 1-methylimidazole, 2-methylimidazole) follows the rate law –d[complex]/dt = {k ₁ K[H⁺]/(1 + K[H⁺])}[complex] (15–30 or 25–40 °C, [H⁺] = 0.1–1.0 M and I = 1.0 M (NaClO₄)). The reaction course consists of a rapid pre-equilibrium protonation, followed by a rate determining chelate ring opening process and subsequent fast release of the one-end bound carbonato ligand. Kinetic parameters, k ₁ and K, at 25 °C are 5.5 × 10^–2 s^–1, 0.44 M^–1 (ImH), 5.1 × 10^–2 s^–1, 0.54 M^–1 (1-Meim) and 3.8 × 10^–3 s^–1, 0.74 M^–1 (2-MeimH) respectively, and activation parameters for k ₁ are H₁ = 43.7 ± 8.9 kJ mol^–1, S₁ = –123 ± 30 J mol^–1 deg^–1 (ImH), H₁ = 43.1 ± 0.3 kJ mol^–1, S₁ = –125 ± 1 J mol^–1 deg^–1 (1-Meim) and H₁ = 64.2 ± 4.3 kJ mol^–1, S₁ = –77 ± 14 J mol^–1 deg^–1 (2-MeimH). The results are compared with those for similar cobalt(III) complexes.     

Electrokinetic properties of mixed solutions of dodecyldimethylamine oxide and sodium dodecyl sulfate: specific adsorption effects of small ions

Electrophoretic light-scattering measurements and potentiometric titrations were carried out on aqueous mixtures of dodecyldimethylamine oxide and sodium dodecyl sulfate. The electrophoretic mobility and the surface charge density of the micelles were always negative, ranging from –2.5 to –3.1×10^–4 cm²V^–1s^–1, and –0.033 to –0.045 cm^–2, respectively, for all surfactant mixing ratios, indicating the specific adsorption of Cl^–, in addition to Na⁺, on micelles. The solution pH, as well as the aggregation number previously reported, displayed maxima at intermediate surfactant mole fractions, that is, the non-ideal behavior. The fractional adsorption of Na⁺ per surfactant molecule in the micelles increased gradually with mixing fraction up to 0.82 atX=[SDS]/([SDS]+[C₁₂DAO])=1, while that of Cl^– decreased from 0.25 atX=0 to zero atX>0.4.