Electron-stimulated reactions in thin D2O films on Pt(111) mediated by electron trapping

We have measured the electron-stimulated desorption (ESD) of D(2), O(2), and D(2)O, the electron-stimulated dissociation of D(2)O at the D(2)O/Pt interface, and the total electron-stimulated sputtering in thin D(2)O films adsorbed on Pt(111) as a function of the D(2)O coverage (i.e., film thickness). Qualitatively different behavior is observed above and below a threshold coverage of approximately 2 monolayers (ML). For coverages less than approximately 2 ML electron irradiation results in D(2)O ESD and some D(2) ESD, but no detectible reactions at the water/Pt interface and no O(2) ESD. For larger coverages, electron-stimulated reactions at the water/Pt interface occur, O(2) is produced and the total electron-stimulated sputtering of the film increases. An important step in the electron-stimulated reactions is the reaction between water ions (generated by the incident electrons) and electrons trapped in the water films to form dissociative neutral molecules. However, the electron trapping depends sensitively on the water coverage: For coverages less than approximately 2 ML, the electron trapping probability is low and the electrons trap preferentially at the water/vacuum interface. For larger coverages, the electron trapping increases and the electrons are trapped in the bulk of the film. We propose that the coverage dependence of the trapped electrons is responsible for the observed coverage dependence of the electron-stimulated reactions.     

Interaction of coadsorbed CH3Cl and D2O layers on Pd(111) studied by sum frequency generation

Adsorption of methyl chloride and coadsorption of CH3Cl and D2O on Pd(111) surfaces at T=100 K have been studied under ultrahigh-vacuum conditions using femtosecond sum frequency generation (SFG) spectroscopy in the spectral regions of CH and OD bands. On the bare Pd(111) substrate, the CH3Cl coverage dependence of the resonant SFG signal is consistent with a progressive molecular rearrangement starting at half saturation followed by the growth of two ordered monolayers in which the molecular axes are perpendicular to the surface. When CH3Cl is adsorbed on top of predeposited D2O on Pd(111), the SFG signals as a function of the CH3Cl exposure indicate that methyl chloride is adsorbed onto D2O through hydrogen bonding. On the contrary when the adsorption order is reversed the strong decrease of the CH3 signal as a function of the D2O exposure is explained by assuming that water molecules penetrate inside the CH3Cl layers, leading to the formation of disordered CH3Cl clusters. In all cases a nonresonant contribution due to molecular adsorption is observed and it shows a dependence upon surface structure and coverage significantly different from that of the resonant vibrational bands.     

吸附氢气后的钯团簇在氧化亚铜表面上的稳定性研究

为了探究吸附H2后的Pdn团簇在Cu2O（111）完整表面和铜缺陷表面上的稳定性,计算了负载在Cu2O（111）完整表面和铜缺陷表面上的Pdn（n=1-4）对H2分子的最稳定吸附结构;利用在给定H2压力和温度下Pdn / Cu2O表面吸附H2的相图揭示了Pdn团簇在Cu2O（111）两个表面的变化情况。结果表明,在吸附了H2分子以后,Pdn团簇更倾向于保持原有的结构,且随着Pd团簇的增大,吸附H2的数量也逐渐增长。     

The properties of ion-water clusters. II. Solvation structures of Na+, Cl-, and H+ clusters as a function of temperature

Ion-water-cluster properties are investigated both through the multistate empirical valence bond potential and a polarizable model. Equilibrium properties of the ion-water clusters H+(H2O)100, Na+(H2O)100, Na+(H2O)20, and Cl-(H2O)17 in the temperature region 100-450 K are explored using a hybrid parallel basin-hopping and tempering algorithm. The effect of the solid-liquid phase transition in both caloric curves and structural distribution functions is investigated. It is found that sodium and chloride ions largely reside on the surface of water clusters below the cluster melting temperature but are solvated into the interior of the cluster above the melting temperature, while the solvated proton was found to have significant propensity to reside on or near the surface in both the liquid- and solid-state clusters.     

The identification of a solvated electron pair in the gaseous clusters of Na(-)(H2O)n and Li(-)(H2O)n

By first principles calculations, we explore the possibility that Na(-)(H(2)O)(n) and Li(-)(H(2)O)(n) clusters, which have been measured previously by photoelectron experiments, could serve as gas-phase molecular models for the solvation of two electrons. Such models would capture the electron-electron interaction in a solution environment, which is missed in the well-known anionic water clusters (H(2)O)(n) (-). Our results show that by n = 10, the two loosely bound s electrons in Li(-)(H(2)O)(n) are indeed detached from lithium, and they could exist in either the singlet (spin-paring) or the triplet (spin-coupling) state. In contrast, the two electrons would prefer to stay on the sodium atom in Na(-)(H(2)O)(n) and on the surface of the cluster. The formation of a solvated electron pair and the variation in solvation structures make these two cluster series interesting subjects for further experimental investigation.     

Adsorption and dissociation of H2O2 on Pt and Pt-alloy clusters and surfaces

The adsorption of H(2)O(2) on Pt and Pt-M alloys, where M is Cr, Co, or Ni, is investigated using density functional theory. Binding energies calculated with a hybrid DFT functional (B3PW91) are in the range of -0.71 to -0.88 eV for H(2)O(2) adsorbed with one of the oxygen atoms on top Pt positions of Pt(3), Pt(2)M, and PtM(2), and enhanced values in the range of -0.81 to -1.09 eV are found on top Ni and Co sites of the Pt(2)M clusters. Adsorption on top sites of Pt(10) yields a weaker binding of -0.48 eV, whereas on periodic Pt(111) and Pt(3)Co(111) surfaces, H(2)O(2) generally dissociates into two OH radicals. On the other hand, attempts to attach H(2)O(2) on bridge sites cause spontaneous dissociation of H(2)O(2) into two adsorbed OH radicals, suggesting that stable adsorptions on bridge sites are not possible for any of the clusters or extended surfaces that are being studied. We also found that the water-H(2)O(2) interaction reduces the strength of the adsorption of H(2)O(2) on these clusters and surfaces.     

Hydrated magnesium cations Mg+(H2O)n, n ≈ 20-60, exhibit chemistry of the hydrated electron in reactions with O2 and CO2

Ion-molecule reactions of Mg(+)(H(2)O)(n), n ≈ 20-60, with O(2) and CO(2) are studied by Fourier-transform ion cyclotron resonance (FT-ICR) mass spectrometry. O(2) and CO(2) are taken up by the clusters. Both reactions correspond to the chemistry of hydrated electrons (H(2)O)(n)(-). Density functional theory calculations predicted that the solvation structures of Mg(+)(H(2)O)(16) contain a hydrated electron that is solvated remotely from a hexa-coordinated Mg(2+). Ion-molecule reactions between Mg(+)(H(2)O)(16) and O(2) or CO(2) are calculated to be highly exothermic. Initially, a solvent-separated ion pair is formed, with the hexa-coordinated Mg(2+) ionic core being well separated from the O(2)(?-) or CO(2)(?-). Rearrangements of the solvation structure are possible and produce a contact-ion pair in which one water molecule in the first solvation shell of Mg(2+) is replaced by O(2)(?-) or CO(2)(?-).     

Adsorption, vibration, and diffusion of O atoms on Rh low-index and (711) stepped defective surfaces

The adsorption, vibration, and diffusion of O atoms on Rh(100), Rh(111), Rh(110), and Rh(711) surfaces were studied using the 5-parameter Morse potential (5-MP) of interaction between an adatom and a metal surface cluster. Our theoretical calculations provide information about adsorption sites, adsorption geometry, binding energy, and eigenvibration. Our results agreed very well with experimental results. Four major results follow. First, the theoretical calculation showed that on the Rh(100) surface the 4-fold hollow site is the only adsorption site. Second, on the O-Rh(111) system, the 3-fold hollow site is the stable adsorption site. Third, on the Rh(110) surface at low coverage, the O atom is adsorbed preferably on the pseudo-3-fold site, while with increasing coverage, the O atom is adsorbed not only on the pseudo-3-fold site but also on the long bridge site. Last, as for the Rh(711) stepped surface, the 3-fold site on the (111) step is metastable, whereas the 4-fold sites on the (100) terrace are stable, which enables the O atoms to diffuse easily from the 3-fold to the 4-fold site at low coverage. Therefore, the O atoms are adsorbed preferrably on the stable 4-fold sites of the (100) terrace and then later as coverage increases on the metastable 3-fold site of the (110) step.     

The solvation of two electrons in the gaseous clusters of Na- (NH3)n and Li- (NH3)n

Alkali metal ammonia clusters, in their cationic, neutral, and anionic form, are molecular models for the alkali-ammonia solutions, which have rich variation of phases with the solvated electrons playing an important role. With two s electrons, the Na(-)(NH(3))(n) and Li(-)(NH(3))(n) clusters are unique in that they capture the important aspect of the coupling between two solvated electrons. By first principles calculations, we demonstrate that the two electrons are detached from the metal by n = 10, which produces a cluster with a solvated electron pair in the vicinity of a solvated alkali cation. The coupling of the two electrons leads to either the singlet or triplet state, both of which are stable. They are also quite distinct from the hydrated anionic clusters Na(-)(H(2)O)(n) and Li(-)(H(2)O)(n), in that the solvated electrons are delocalized and widely distributed among the solvent ammonia molecules. The Na(-)(NH(3))(n) and Li(-)(NH(3))(n) series, therefore, provide another interesting type of molecular model for the investigation of solvated electron pairs.     

Cux (x=1-4)团簇在CeO2(111)表面的吸附

用基于密度泛函理论的第一性原理方法研究了Cu团簇(Cu_x, x=1-4)在CeO₂(111)表面的吸附. 研究发现当团簇比较小时(x=2, 3), 倾向于平铺表面; 当x=4时, Cu团簇在CeO₂(111)表面以三维的四面体结构吸附较为稳定, 从Cu 3d到Ce 4f的电荷转移使Cu团簇带正电荷. 由二维的菱形结构到三维的四面体结构的转变势垒为1.05 eV, 并且其中一个Cu原子直接迁移到另外三个Cu原子的空位顶部的转变路径比较有利. 在Cu团簇与CeO₂的相互作用过程中, Cu-O和Cu-Cu相互作用的竞争最终决定了Cu团簇在CeO₂上的形貌. 这种CeO₂(111)负载的带正电的三维Cu团簇将对水分解, 进而对水煤气反应具有高的催化活性.     

Interfaces of ionic liquids and transition metal surfaces-adsorption, growth, and thermal reactions of ultrathin [C1C1Im][Tf2N] films on metallic and oxidised Ni(111) surfaces

Ultrathin films of the ionic liquid 1,3-dimethylimidazolium bis(trifluoromethylsulfonyl)imide ([C(1)C(1)Im][Tf(2)N]) were deposited on differently terminated Ni(111) single crystal surfaces. The initial wetting behaviour, the growth characteristics, the molecular arrangement at the interface, and thermal reactivity were investigated using angle-resolved X-ray photoelectron spectroscopy (ARXPS). On clean Ni(111), the initial growth occurs in a layer-by-layer mode. At submonolayer coverages up to at least 0.40 ML, a preferential arrangement of the IL ions in a bilayer structure, with the imidazolium cations in contact with the Ni surface atoms and the anions on top of the cation, is deduced. For higher coverages, a transition to a checkerboard-type arrangement occurs, which is most likely due to repulsive dipole-dipole interactions in the first layer. An overall preference for a checkerboard-type adsorption behaviour, i.e., anions and cations adsorbing next to each other, is found on the oxygen-precovered O(√3×√3)R30° Ni(111) surface. The thermal stability of adsorbed IL layers on Ni(111) and on a fully oxidised Ni(111) surface was studied by heating the layers to elevated temperatures. For clean Ni(111) reversible adsorption takes place. For the oxidised surface, however, only cation-related moieties desorb, starting at ~450 K, while anion-related signals remain on the surface up to much higher temperatures.     

Comparative FTIR spectroscopy of HX adsorbed on solid water: Ragout-jet water clusters vs ice nanocrystal arrays

In addition to revealing the stretch-mode bands of the smallest mixed clusters of HCl and HBr (HX) with water, the ragout-jet FTIR spectra of dense mixed water-acid supersonic jets include bands that result from the interaction of HX with larger water clusters. It is argued here that low jet temperatures prevent the water-cluster-bound HX molecules from becoming sufficiently solvated to induce ionic dissociation. The molecular nature of the HX can be deduced directly from the observed influence of changing from HCl to HBr and from replacing H2O with D2O. Furthermore, the band positions of HX are roughly coincidental with bands assigned to molecular HCl and HBr adsorbed on ice nanocrystal surfaces at temperatures below 100 K. It is also interesting that the HX band positions and widths approximate those of HX bound to the surface of amorphous ice films at <60 K. Though computational results suggest the adsorbed HX molecules observed in the jet expansions are weakly distorted by single coordination with surface dangling-oxygen atoms, on-the-fly trajectories indicate that the cluster skeletons undergo large-amplitude low-frequency vibrations. Local HX solvation, the extent of proton sharing, and the HX vibrational spectra undergo serious modulation on a picosecond time scale.     

Electronic relaxation dynamics of water cluster anions

The electronic relaxation dynamics of water cluster anions, (H(2)O)(n)(-), have been studied with time-resolved photoelectron imaging. In this investigation, the excess electron was excited through the p<--s transition with an ultrafast laser pulse, with subsequent electronic evolution monitored by photodetachment. All excited-state lifetimes exhibit a significant isotope effect (tau(D)2(O)/tau(H)2(O) approximately 2). Additionally, marked dynamical differences are found for two classes of water cluster anions, isomers I and II, previously assigned as clusters with internally solvated and surface-bound electrons, respectively. Isomer I clusters with n > or = 25 decay exclusively by internal conversion, with relaxation times that extrapolate linearly with 1/n toward an internal conversion lifetime of 50 fs in bulk water. Smaller isomer I clusters (13 < or = n < or = 25) decay through a combination of excited-state autodetachment and internal conversion. The relaxation of isomer II clusters shows no significant size dependence over the range of n = 60-100, with autodetachment an important decay channel following excitation of these clusters. Photoelectron angular distributions (PADs) were measured for isomer I and isomer II clusters. The large differences in dynamical trends, relaxation mechanisms, and PADs between large isomer I and isomer II clusters are consistent with their assignment to very different electron binding motifs.     

Hydrogen bonding interactions of pyridine*+ with water: stepwise solvation of distonic cations

The solvation energies of the pyridine*+ radical cation by 1-4 H2O molecules were determined by equilibrium measurements in a drift cell. The binding energies of the pyridine*+(H2O)n clusters are similar to the binding energies of protonated pyridine-water clusters, (C5H5NH+)(H2O)n, which involve NH+..OH2 bonds and different from those of the solvated benzene radical cation-water clusters, C6H6*+(H2O)n, which involve CHdelta+..OH2 bonds. These relations indicate that the observed pyridine*+ ions have the distonic *C5H4NH+ structures that can form NH+..OH2 bonds. The observed thermochemistry and ab initio calculations show that these bonds are not affected significantly by an unpaired electron at another site of the ion. Similar observations also identify the 2-fluoropyridine*+ distonic ion. The distonic structure is also consistent with the reactivity of pyridine*+ in H atom transfer, intra-cluster proton transfer and deprotonation reactions. The results present the first measured stepwise solvation energies of distonic ions, and demonstrate that cluster thermochemistry can identify distonic structures.     

O与O2在Au团簇上吸附的密度泛函理论研究

采用基于密度泛函理论(DFT)的Dmol³程序系统研究了O原子与O₂在 Au₁₉与Au₂₀团簇上的吸附反应行为. 结果表明: O在Au₁₉团簇顶端洞位上的吸附较Au₂₀强; 在侧桥位吸附强度相近. O与O₂在带负电Au团簇上吸附较强, 在正电团簇吸附较弱. 从O―O键长看, 当金团簇带负电时, O―O键长较长, 中性团簇次之, 正电团簇中O―O键长较短, 因而O₂活化程度依次减弱. 电荷布居分析表明, Au团簇带负电时, O与O₂得电子数较中性团簇多, 而团簇带正电时, 得电子数较少. 差分电荷密度(CDD)表明, O₂与Au团簇作用时, 金团簇失电子, O₂的π^*轨道得电子, 使O―O键活化. O₂在Au₁₉^-团簇上解离反应活化能为1.33 eV, 较中性团簇低0.53 eV; 而在Au₁₉⁺上活化能为2.27 eV, 较中性团簇高0.41 eV, 这与O₂在不同电性Au₁₉团簇O―O键活化规律相一致.     

The mechanism of emerging catalytic activity of gold nano-clusters on rutile TiO2(110) in CO oxidation reaction

This paper reveals the fact that the O adatoms (O(ad)) adsorbed on the 5-fold Ti rows of rutile TiO(2)(110) react with CO to form CO(2) at room temperature and the oxidation reaction is pronouncedly enhanced by Au nano-clusters deposited on the above O-rich TiO(2)(110) surfaces. The optimum activity is obtained for 2D clusters with a lateral size of ～1.5 nm and two-atomic layer height corresponding to ～50 Au atoms∕cluster. This strong activity emerging is attributed to an electronic charge transfer from Au clusters to O-rich TiO(2)(110) supports observed clearly by work function measurement, which results in an interface dipole. The interface dipoles lower the potential barrier for dissociative O(2) adsorption on the surface and also enhance the reaction of CO with the O(ad) atoms to form CO(2) owing to the electric field of the interface dipoles, which generate an attractive force upon polar CO molecules and thus prolong the duration time on the Au nano-clusters. This electric field is screened by the valence electrons of Au clusters except near the perimeter interfaces, thereby the activity is diminished for three-dimensional clusters with a larger size.     

Solvation of excess electrons in LiF ionic pair matrix: evidence for a solvated dielectron from ab initio molecular dynamics simulations and calculations

Ab initio molecular dynamics simulations and first-principles calculations reveal the existence of a solvated dielectron species, (2e)s, in an LiF ionic matrix. The nature of the solvation mechanism and the stability of the species was explored. In addition to electrostatic interactions, a hole-orbital coupling among solvent molecules may significantly enhance the stability of the solvated electrons and govern the extent of electron solvation. This hole-orbital coupling is different from either an electrostatic coupling or conventional chemical bonding, and it may be described as a transition between them.     

CH3O decomposition on PdZn(111), Pd(111), and Cu(111). A theoretical study

Methanol steam re-forming, catalyzed by Pd/ZnO, is a potential hydrogen source for fuel cells, in particular in pollution-free vehicles. To contribute to the understanding of pertinent reaction mechanisms, density functional slab model studies on two competing decomposition pathways of adsorbed methoxide (CH(3)O) have been carried out, namely, dehydrogenation to formaldehyde and C-O bond breaking to methyl. For the (111) surfaces of Pd, Cu, and 1:1 Pd-Zn alloy, adsorption complexes of various reactants, intermediates, transition states, and products relevant for the decomposition processes were computationally characterized. On the surface of Pd-Zn alloy, H and all studied C-bound species were found to prefer sites with a majority of Pd atoms, whereas O-bound congeners tend to be located on sites with a majority of Zn atoms. Compared to Pd(111), the adsorption energy of O-bound species was calculated to be larger on PdZn(111), whereas C-bound moieties were less strongly adsorbed. C-H scission of CH(3)O on various substrates under study was demonstrated to proceed easier than C-O bond breaking. The energy barrier for the dehydrogenation of CH(3)O on PdZn(111) (113 kJ mol(-)(1)) and Cu(111) (112 kJ mol(-)(1)) is about 4 times as high as that on Pd(111), due to the fact that CH(3)O interacts more weakly with Pd than with PdZn and Cu surfaces. Calculated results showed that the decomposition of methoxide to formaldehyde is thermodynamically favored on Pd(111), but it is an endothermic process on PdZn(111) and Cu(111) surfaces.     

Oxygen adsorption on Al (111) surface interstitial site calculated by density functional theory

The adsorption possibilities of oxygen atoms at Al (111) surface for different oxygen atom coverages (Θ) from 0.25 to 1 ml have been studied using first principles based on density functional theory with generalized gradient approximation. The results show that the interstitial sites on Al (111) surface are relatively stable, in which binding energies are 0.6 ～ 1 eV/atom lower than those on surface face centered cubic (fcc) sites for the different coverages. The binding energy and work function of the oxygen‐adsorbed surface increase with the oxygen atom coverage. Moreover, the oxygen atom at one tetrahedral site of Al (111) subsurface becomes more and more unstable with the decrease of the coverage, and it moves up to the Al (111) surface hexagonal close packed (hcp) site at Θ = 0.25. All the octahedral absorption sites are also unstable in relatively lower coverages (Θ = 0.5 and 0.25). The bond length and overlap population between Al and O, including the relaxation effects on the oxygen atom coverage are discussed. Copyright © 2010 John Wiley & Sons, Ltd.