水相中微波辐射下芳基硫醚衍生物的铜催化合成

开展了水相中硫脲与碘代芳烃反应生成芳基硫醚衍生物的微波辅助合成研究。 高效地合成了一系列的芳基硫醚衍生物,最高收率达到90%。     

羟基磷灰石负载锰催化溴苯的Suzuki反应

以羟基磷灰石(HAP)负载Mn作为催化剂(MnHAP)催化溴苯与苯硼酸的Suzuki交叉偶联反应.以氟离子交换羟基磷灰石的羟基(MnFAP)后,催化剂的活性显著提高,在优化的反应条件下能得到约70%的产率.进一步考察了溶剂和不同取代基的影响.结果表明,MnFAP作用下溶剂极性对反应有很大影响,当溶剂DMF/H2O比例为1/3时产率最高.对于不同取代基取代的溴代芳烃或苯硼酸,可以得到中等产率(18%~46%)的偶联产物.     

Photohomolysis and Photoheterolysis in Aryl Sulfonates and Aryl Phosphates

The photochemical behaviour of selected aryl sulfonates and phosphates (ArOX) in polar and nonpolar media has been investigated by laser flash photolysis (LFP) experiments. Two main pathways have been identified, namely the photohomolysis of the ArO−X bond or the photoheterolysis of the Ar−OX bond depending on the nature of the leaving group (OX) and on the nature of the substituents on the aromatic ring. In nonpolar solvents the esters are quite photostable due to an efficient triplet deactivation. In polar solvents, the homolytic fragmentation of the ArO−S bond from the exited singlets was found in aryl sulfonates bearing moderately electron-donating groups as well as electron-withdrawing groups. In electron-rich aryl phosphates and sulfonates photoheterolysis of the Ar−OP/Ar−OS bond took place as the exclusive pathway.     

镍催化环丁酮肟酯与芳基锌试剂的Negishi偶联反应

发展了一种镍催化环丁酮肟酯和芳基锌试剂之间Negishi偶联的方法.镍既作为亚胺自由基的引发剂,也作为芳基锌试剂与烷基自由基偶联反应的催化剂在反应中起作用.本方法可避免使用剧毒的氰化物,且具有很广的底物适应性和官能团兼容性,因此可能是一种具有潜在吸引力的高效合成烷基腈类化合物的新策略.初步的机理研究显示,该反应极可能经历自由基历程.     

Pd-Catalysed Decarbonylation Free Approach to Carbonylative Esterification of 5-HMF to Its Aryl Esters Synthesis Using Aryl Halides and Oxalic Acid as C1 Source

A decarbonylation free, polystyrene-supported, Pd (Pd@PS)-catalysed carbonylative esterification of the hydroxy group of 5-hydroxymethyl furfural (5-HMF) to its corresponding aryl esters has been developed. The use of Pd@PS, oxalic acid as CO source, and aryl halides was first explored for the aryl ester of 5-HMF synthesis. Here, we investigated the vital role of a polystyrene support to avoid the commonly known decarbonylation of 5-HMF. The reaction exhibits vast substrate scope with comparably good yield and catalyst recyclability.     

Dehalogenation of Aryl Halides Catalyzed by Montmorillonite Immobilized Bimetal Catalyst in Aqueous System

A novel bisupported bimetal catalyst PVP-PdCl2-FeSO4/Al-Mont-PEG600 was prepared by immobilization of PVP (poly (N-vinyl-2-pyrrolidone)) supported bimetallic catalyst using alumina pillared inartificial montmorillonite as the carrier. This catalyst has good dehalogenation activity and selectivity to aryl halides-o-chlorotoluene in aqueous system in the presence of phase transfer catalyst (PEG) and sodium formate as hydrogen source. The catalyst also shows good reusability.     

Synthesis of Phenols: Organophotoredox/Nickel Dual Catalytic Hydroxylation of Aryl Halides with Water

A highly effective hydroxylation reaction of aryl halides with water under synergistic organophotoredox and nickel catalysis is reported. The OH group of the resulting phenols originates from water, following deprotonation facilitated by an intramolecular base group on the ligand. Significantly, aryl bromides as well as less reactive aryl chlorides served as effective substrates to afford phenols with a wide range of functional groups. Without the need for a strong inorganic base or an expensive noble‐metal catalyst, this process can be applied to the efficient preparation of diverse phenols and enables the hydroxylation of multifunctional pharmaceutically relevant aryl halides.     

Palladium‐Catalyzed Amination of Aryl Sulfides with Anilines

A combination of a palladium–NHC catalyst and potassium hexamethyldisilazide enables the amination of aryl sulfides with anilines to afford a wide variety of diarylamines. The reaction conditions are versatile enough for the reaction of even bulky ortho‐substituted aryl sulfides. This amination can be applied to the modular synthesis of N‐aryl carbazoles from the corresponding ortho‐bromothioanisoles. As aryl sulfoxides undergo extended Pummerer reactions to afford ortho‐substituted aryl sulfides, the Pummerer products are thus useful substrates for the amination to culminate in efficient syntheses of a 2‐anilinobenzothiophene and an indole as proof‐of‐principle of the utility of the extended Pummerer reaction/amination cascade.     

Direct N‐Arylation of Azaheterocycles with Aryl Halides under Ligand‐free Condition

A simple and efficient C? N cross‐coupling method of aryl halides with various heterocycles was reported, by using 10 mol% of CuI as catalyst and 1.2 equiv. NaH as base. Aryl iodides, aryl bromides and many substituted aryl chlorides could efficiently react with heterocycles, providing variety of N‐arylated products in good to excellent yields. The ligand‐free catalyst system was stable in air and could be readily reused.     

Palladacycle-Catalyzed Carbonylation of Aryl Iodides or Bromides with Aryl Formates

An efficient palladacycle-catalyzed aromatic carbonylation reaction of aryl formates with aryl iodides or bromides has been developed. Commercially available and easily prepared aryl formates were employed as carbonyl sources without the use of external carbon monoxide. The present catalytic system shows broad functional group tolerance and affords aryl benzoate derivatives in good to excellent yields.     

一锅法合成芳(杂环)胺亚甲基双膦酸四乙酯

以I₂为催化剂,原甲酸三乙酯、芳(杂环)胺和亚磷酸二乙酯为原料,室温无溶剂条件下,一锅合成了系列芳(杂环)胺亚甲基双膦酸四乙酯,收率96%~99%。 当I₂物质的量分数为5%时,产物收率最高。 本方法底物适用范围广,操作简单。 I₂作为催化剂,安全高效。     

XiDehalogenation of Aryl Halides Catalyzed by MontK10 Immobilized PVP-Pd-Sn Catalyst in Aqueous System

Catalytic dehalogenation of organic halides is of great value to the organic synthesis and for the preventing of environmental pollution. Although, in recent years, there are many reports describing dehalogenation of organic halides in the literature1,2,3, most of them were carried out in the organic system,only few examples4,5 of dehalogenation were carried out in aqueous system. The toxic aryl halides may contaminate and harm human being seriously through food chain. Therefore, it is of utmo…     

钯催化偶联-消去法合成芳基末端炔的研究进展

钯催化偶联-消去法合成芳基末端炔的研究进展;芳炔;偶联反应;钯催化剂;合成;综述     

Suzuki Reaction of Aryl Bromides Using a Phosphine-Free Magnetic Nanoparticle-Supported Palladium Catalyst

A palladium catalyst immobilized on superparaganetic nanoparticles was prepared with a palladium loading of 0.30 mmol/g. The catalyst was characterized using X-ray diffraction, scanning electron microscopy, transmission electron microscopy, vibrating sample magnetometry, thermogravimetric analysis, Fourier transform infrared, atomic absorption spectrophotometry, and nitrogen adsorption. The immobilized palladium catalyst was an efficient catalyst without added phosphine ligands for the Suzuki cross-coupling reaction of several aryl bromides with phenylboronic acid. The recovery of catalyst was simply by magnetic decantation in the presence of a magnet. The immobilized palladium catalyst can be reused many times without significant degradation in catalytic activity. No leaching of active palladium species into the reaction solution was detected.     

镍催化转移缩聚合成全氟环丁基芳基醚聚合物

研究了通过镍催化转移缩聚的方法来合成全氟环丁基芳基醚聚合物.首先,我们以对溴苯酚和1,2-二溴四氟乙烷为起始原料,通过两步反应得到对溴三氟乙烯基芳基醚,进一步加热环化二聚得到单体1,2-二(4-溴苯氧基)六氟环丁烷.该二聚物再与异丙基格氏试剂发生镁交换反应,生成格氏试剂中间体,在催化剂Ni(dppe)Cl2的存在下发生镍催化转移缩聚生成聚合物.研究了反应时间、温度和单体投料比对催化缩聚反应的影响.     

A General Palladium‐Catalyzed Hiyama Cross‐Coupling Reaction of Aryl and Heteroaryl Chlorides

A general palladium‐catalyzed Hiyama cross‐coupling reaction of aryl and heteroaryl chlorides with aryl and heteroaryl trialkoxysilanes by a Pd(OAc)₂/ L2 catalytic system is presented. A newly developed water addition protocol can dramatically improve the product yields. The conjugation of the Pd/ L2 system and the water addition protocol can efficiently catalyze a broad range of electron‐rich, ‐neutral, ‐deficient, and sterically hindered aryl chlorides and heteroaryl chlorides with excellent yields within three hours and the catalyst loading can be down to 0.05 mol % Pd for the first time. Hiyama coupling of heteroaryl chlorides with heteroaryl silanes is also reported for the first time. The reaction can be easily scaled up 200 times (100 mmol) without any degasification and purification of reactants; this facilitates the practical application in routine synthesis.     

芳甲酸氰基芳甲酯的合成

芳甲酸氰基芳甲酯是重要的有机合成中间体,其现有合成方法采用剧毒氰化物为氰源来合成。 本研究以K₄[Fe(CN)₆]为绿色氰化试剂,芳酰氯为原料,采用一锅两步反应合成芳甲酸氰基芳甲酯。 通过改变第二步反应温度、反应时间、硼氢化钠和催化剂的用量获得最佳反应条件,以61.7%~80.3%的产率合成了10种芳甲酸氰基芳甲酯(2a~2j),产物结构通过傅里叶变换红外光谱仪(FTIR)、核磁共振波谱仪(NMR)分析确认。 根据实验结果,提出了可能的反应机理。 该法避免了对剧毒氰化剂的使用,具有产率高、操作简单、后处理方便等优点。     

Room-Temperature Bismuth-Catalyzed Bis-arylation of Carbonyl Compounds with Aryl Ethers and Phenols

Using Bi2（SO4）3 as the catalyst and TMSCl as the additive, a wide variety of aldehydes, ketones, and acetals were smoothly condensed with aryl ethers at room temperature to provide the corresponding diarylmethanes and triarylmethanes selectively in good to excellent yields.     

An Efficient and General Method for Formylation of Aryl Bromides with CO2 and Poly(methylhydrosiloxane)

The formylation of aryl halides with CO₂ to generate aryl aldehydes is challenging. Herein, we report a novel synthesis of aryl aldehydes by formylation of aryl bromides with CO₂ and a waste silane, poly(methylhydrosiloxane) (PMHS). It has been discovered that a simple combination of 1,3‐bis(diphenyphosphino)propane (DPPP)‐chelated Pd catalyst, Pd(DPPP)Cl₂, with 1,8‐diazabicyclo[5.4.0]undec‐7‐ene (DBU) is able to effectively catalyze the reaction, leading to aryl aldehydes in moderate to excellent yields, and without any by‐products in most cases. Moreover, this route could be extended to the formylation of aryl iodides with high efficiency. This approach is simple, less costly, and environmentally friendly, and also widens the applications of CO₂ to form value‐added chemicals by the construction of new C?C bonds.     

Copper-Catalyzed Coupling of Thiourea with Aryl Iodides:The Direct Synthesis of Aryl Thiols

A general, economical and efficient protocol for the direct copper‐catalyzed coupling of thiourea with aryl iodides is developed and it will be potentially applied in large‐scale industry as a preferred process.