粘贴压电层功能梯度材料Timoshenko梁的热过屈曲分析

研究了上下表面粘贴压电层的功能梯度材料Timoshenko梁在升温及电场作用下的过屈曲行为。在精确考虑轴线伸长和一阶横向剪切变形的基础上,建立了压电功能梯度Timoshenko层合梁在热-电-机械载荷作用下的几何非线性控制方程。其中,假设功能梯度的材料性质沿厚度方向按照幂函数连续变化,压电层为各向同性均匀材料。采用打靶法数值求解所得强非线性边值问题,获得了在均匀电场和横向非均匀升温场内两端固定Timoshenko梁的静态非线性屈曲和过屈曲数值解。并给出了梁的变形随热、电载荷及材料梯度参数变化的特性曲线。结果表明,通过施加电压在压电层产生拉应力可以有效地提高梁的热屈曲临界载荷,延缓热过屈曲发生。由于材料在横向的非均匀性,即使在均匀升温和均匀电场作用下,也会产生拉-弯耦合效应。但是对于两端固定的压电-功能梯度材料梁,在横向非均匀升温下过屈曲变形仍然是分叉形的。     

功能梯度材料板件三维分析的半解析梯度有限元法

将半解析有限元与梯度有限元相结合,形成一种半解析梯度有限元来求解功能梯度材料板件问题。该方法兼有有限元法的适应性强、程序统一,半解析有限元法的节省单元与计算工作量,梯度有限元法的适应构件内部材料性能任意梯度分布等特点,并实现用一维数值计算给出构件三维分析结果。算例分析表明了方法的精度、功能与上述特点,充分揭示了功能梯度材料板件力学响应的三维形态。半解析梯度有限元法可推广应用到其他功能梯度材料面结构的各类分析中。     

非保守功能梯度弹性组合曲梁的精确模型及其数值解

基于直法线假设,采用可伸长梁的几何非线性理论,建立了功能梯度材料弹性组合曲梁受切线均布随从力作用下的静态大变形数学模型。该模型不仅计及了轴线伸长,同时也精确地考虑了梁的初始曲率对变形的影响以及轴向变形与弯曲变形之间的耦合效应。用打靶法数值求解了由金属和陶瓷两相材料所构成的一种FGM组合曲梁在沿轴线均布切向随动载荷作用下的非线性平面弯曲问题,给出了不同梯度指标下FGM弹性曲梁随载荷参数大范围变化的平衡路径,并与金属和陶瓷两种单相材料曲梁的相应特性进行了比较。     

Free vibration analysis of functionally graded material beams based on Levinson beam theory

Free vibration response of functionally graded material (FGM) beams is studied based on the Levinson beam theory (LBT). Equations of motion of an FGM beam are derived by directly integrating the stress-form equations of elasticity along the beam depth with the inertial resultant forces related to the included coupling and higherorder shear strain. Assuming harmonic response, governing equations of the free vibration of the FGM beam are reduced to a standard system of second-order ordinary differential equations associated with boundary conditions in terms of shape functions related to axial and transverse displacements and the rotational angle. By a shooting method to solve the two-point boundary value problem of the three coupled ordinary differential equations, free vibration response of thick FGM beams is obtained numerically. Particularly, for a beam with simply supported edges, the natural frequency of an FGM Levinson beam is analytically derived in terms of the natural frequency of a corresponding homogenous Euler-Bernoulli beam. As the material properties are assumed to vary through the depth according to the power-law functions, the numerical results of frequencies are presented to examine the effects of the material gradient parameter, the length-to-depth ratio, and the boundary conditions on the vibration response.     

Bending of functionally graded piezoelectric rectangular plates

By introducing two displacement functions as well as two stress functions, two independent state equations with variable coefficients are derived from the three-dimensional theory equations of piezoelasticity for transverse isotropy. A laminated approximation is used to transform the state equations to those with constant coefficients in each sub-layer. The bending problem of a functionally graded rectangular plate is then analyzed based on the state equations. Numerical results are presented and the effect of material gradient index is discussed. Supported by the National Natural Sciences Foundation of China (No. 10002016).     

Sound radiation of a functionally graded material cylindrical shell in water by mobility method

Based on the fundamental dynamic equations of functionally graded material (FGM) cylindrical shell, this paper investigates the sound radiation of vibrational FGM shell in water by mobility method. This model takes into account the exterior fluid loading due to the sound press radiated by the FGM shell. The FGM cylindrical shell was excited by a harmonic line radial force uniformly distributing along the generator. The FGM shell equations of motion, the Helmholtz equation in the exterior fluid medium and the continuity equation at fluid-shell interface are used in this vibroacoustic problem. The expressions of sound radiation efficiency and sound field of the FGM shell have been derived by mobility method. Radiation efficiency, modal mobility and the directivity pattern of the sound field are solved numerically. In particular, radiation efficiency and directivity pattern with various power law index are analyzed.     

Thermal shock resistance behavior of a functionally graded ceramic: Effects of finite cooling rate

This work presents a semi-analytical model to explore the effects of cooling rate on the thermal shock resistance behavior of a functionally graded ceramic (FGC) plate with a periodic array of edge cracks. The FGC is assumed to be a thermally heterogeneous material with constant elastic modulus and Poisson's ratio. The cooling rate applied at the FGC surface is modeled using a linear ramp function. An integral equation method and a closed form asymptotic temperature solution are employed to compute the thermal stress intensity factor (TSIF). The thermal shock residual strength and critical thermal shock of the FGC plate are obtained using the SIF criterion. Thermal shock simulations for an Al₂O₃/Si₃N₄ FGC indicate that a finite cooling rate leads to a significantly higher critical thermal shock than that under the sudden cooling condition. The residual strength, however, is relatively insensitive to the cooling rate.     

复杂形状及开孔功能梯度板的三维分析

In this paper, the basic formulae for the semi-analytical graded FEM on FGM members are derived. Since FGM parameters vary along three space coordinates, the parameters can be integrated in mechanical equations. Therefore with the parameters of a given FGM plate, problems of FGM plate under various conditions can be solved. The approach uses 1D discretization to obtain 3D solutions, which is proven to be an effective numerical method for the mechanical analyses of FGM structures. Examples of FGM plates with complex shapes and various holes are presented.     

Crack propagation in a functionally graded plate under thermal shock

Summary Thermal cracking in a ceramic/metal functionally graded plate is discussed. When a functionally graded plate is cooled from high temperature, curved or straight crack paths are experimentally observed on the ceramic surface. One of the reasons that make the crack paths to differ are the thermal or mechanical conditions. In order to clarify the influence of these conditions on the crack path, the crack propagation is simulated using finite element method. Received 29 September 1998; accepted for publication 2 August 1999     

Thermal vibration of functionally graded porous nanocomposite beams reinforced by graphene platelets

The thermal vibration of functionally graded(FG) porous nanocomposite beams reinforced by graphene platelets(GPLs) is studied.The beams are exposed to the thermal gradient with a multilayer structure.The temperature varies linearly across the thickness direction.Three different types of dispersion patterns of GPLs as well as porosity distributions are presented.The material properties vary along the thickness direction.By using the mechanical parameters of closed-cell cellular solid,the variatio...     

Free vibration of functionally graded beams based on both classical and first-order shear deformation beam theories

The free vibration of functionally graded material （FGM） beams is studied based on both the classical and the first-order shear deformation beam theories. The equations of motion for the FGM beams are derived by considering the shear deforma- tion and the axial, transversal, rotational, and axial-rotational coupling inertia forces on the assumption that the material properties vary arbitrarily in the thickness direction. By using the numerical shooting method to solve the eigenvalue problem of the coupled ordinary differential equations with different boundary conditions, the natural frequen- cies of the FGM Timoshenko beams are obtained numerically. In a special case of the classical beam theory, a proportional transformation between the natural frequencies of the FGM and the reference homogenous beams is obtained by using the mathematical similarity between the mathematical formulations. This formula provides a simple and useful approach to evaluate the natural frequencies of the FGM beams without dealing with the tension-bending coupling problem. Approximately, this analogous transition can also be extended to predict the frequencies of the FGM Timoshenko beams. The numerical results obtained by the shooting method and those obtained by the analogous transformation are presented to show the effects of the material gradient, the slenderness ratio, and the boundary conditions on the natural frequencies in detail.     

Contact vibration analysis of the functionally graded material coated half-space under a rigid spherical punch

This paper studies the contact vibration problem of an elastic half-space coated with functionally graded materials (FGMs) subject to a rigid spherical punch. A static force superimposing a dynamic time-harmonic force acts on the rigid spherical punch. Firstly, we give the static contact problem of FGMs by a least-square fitting approach. Next, the dynamic contact pressure is solved by employing the perturbation method. Lastly, the dynamic contact stiffness with different dynamic contact displacement conditions is derived for the FGM coated half-space. The effects of the gradient index, coating thickness, internal friction, and punch radius on the dynamic contact stiffness factor are discussed in detail.     

热环境中功能梯度圆形薄板的混沌运动

针对陶瓷-金属功能梯度圆板,同时考虑几何非线性、材料物性参数随温度变化且材料组分沿厚度方向按幂律分布的情况,应用虚功原理给出了热载荷与横向简谐载荷共同作用下的非线性振动偏微分方程。在固支无滑动的边界条件下,通过引入位移函数,利用伽辽金方法得到了达芬型非线性动力学方程。利用Melnikov方法,给出了热环境中功能梯度圆板可能发生混沌运动的临界条件。通过数值算例,给出了不同体积分数指数和温度的同宿分岔曲线,平面相图和庞加莱映射图,讨论其对临界条件的影响,证实了系统混沌运动的存在。通过分岔图和与其相对应的最大李雅普诺夫指数图,分析了激励频率和激励幅值对倍周期分岔的影响及变化规律,发现系统可出现周期、倍周期和混沌等复杂动力学响应。     

Free vibration of functionally graded material beams with surface-bonded piezoelectric layers in thermal environment

Free vibration of statically thermal postbuckled functionally graded material （FGM） beams with surface-bonded piezoelectric layers subject to both temperature rise and voltage is studied. By accurately considering the axial extension and based on the Euler-Bernoulli beam theory, geometrically nonlinear dynamic governing equations for FGM beams with surface-bonded piezoelectric layers subject to thermo-electro- mechanical loadings are formulated. It is assumed that the material properties of the middle FGM layer vary continuously as a power law function of the thickness coordinate, and the piezoelectric layers are isotropic and homogenous. By assuming that the amplitude of the beam vibration is small and its response is harmonic, the above mentioned non-linear partial differential equations are reduced to two sets of coupled ordinary differential equations. One is for the postbuckling, and the other is for the linear vibration of the beam superimposed upon the postbuckled configuration. Using a shooting method to solve the two sets of ordinary differential equations with fixed-fixed boundary conditions numerically, the response of postbuckling and free vibration in the vicinity of the postbuckled configuration of the beam with fixed-fixed ends and subject to transversely nonuniform heating and uniform electric field is obtained. Thermo-electric postbuckling equilibrium paths and characteristic curves of the first three natural frequencies versus the temperature, the electricity, and the material gradient parameters are plotted. It is found that the three lowest frequencies of the prebuckled beam decrease with the increase of the temperature, but those of a buckled beam increase monotonically with the temperature rise. The results also show that the tensional force produced in the piezoelectric layers by the voltage can efficiently increase the critical buckling temperature and the natural frequency.     

Higher-order crack tip fields for functionally graded material plate with transverse shear deformation

The crack tip fields are investigated for a cracked functionally graded material (FGM) plate by Reissner’s linear plate theory with the consideration of the transverse shear deformation generated by bending. The elastic modulus and Poisson’s ratio of the functionally graded plates are assumed to vary continuously through the coordinate y, according to a linear law and a constant, respectively. The governing equations, i.e., the 6th-order partial differential equations with variable coefficients, are derived in the polar coordinate system based on Reissner’s plate theory. Furthermore, the generalized displacements are treated in a separation-of-variable form, and the higher-order crack tip fields of the cracked FGM plate are obtained by the eigen-expansion method. It is found that the analytic solutions degenerate to the corresponding fields of the isotropic homogeneous plate with Reissner’s effect when the in-homogeneity parameter approaches zero.     

Thermal stresses analysis of ceramic/metal functionally gradient material cylinder

ＩｎｔｒｏｄｕｃｔｉｏｎＣｅｒａｍｉｃ／ｍｅｔａｌｆｕｎｃｔｉｏｎａｌｙｇｒａｄｉｅｎｔｍａｔｅｒｉａｌ（ＦＧＭ）ｈａｓｇｒａｄｉｅｎｔｉｎｇｒｅｄｉｅｎｔｄｉｓｔｒｉｂｕｔｉｏｎ,ｓｏｉｔｓｐｒｏｐｅｒｔｉｅｓｏｆｔｈｅｈｅａｔｔｒａｎｓｆｅｒａｎ...     

Neural network optimization of material composition of a functionally graded material plate at arbitrary temperature range and temperature rise

Summary A neural network model is applied to optimization problems of material compositions for a functionally graded material plate with arbitrarily distributed and continuously varied material properties in the thickness direction. Unsteady temperature distribution is evaluated by taking into account the bounds of the number of the layers. Thermal stress components for an infinite functionally graded material plate are formulated under traction-free mechanical conditions. As a numerical example, a plate composed of zirconium oxide and titanium alloy is considered. In the optimization problem of minimizing the thermal stress distribution, the numerical calculations are carried out making use of the neural network. The optimum material composition is determined by taking into account the effect of temperature-dependence of material properties. The results obtained by neural network and ordinary nonlinear programming method are compared. Received 3 March 1998; accepted for publication 22 May 1998     

功能梯度材料构件三维分析的细观元模型

提出一种新颖的功能梯度构件分析的细观元法,给出了方法模型、基本算式及特点与功能。细观元法对构件的常规有限单元内部设置密集细观单元以反映材料特性梯度变化,又通过协调条件将各细观元结点自由度转换为同一常规有限元自由度,再上机计算。这种细观元法既能充分反映材料功能梯度及组分变化特性,而其计算单元与自由度又与常规有限元一样,是一种针对功能梯度构件分析的有效数值方法。算例表明了细观元法对不同情况下功能梯度构件分析的适应性与精度。     

Natural frequencies of rotating functionally graded cylindrical shells

Love’s first approximation theory is used to analyze the natural frequencies of rotating functionally graded cylindrical shells.To verify the validity of the present method,the natural frequencies of the simply supported non-rotating isotropic cylindrical shell and the functionally graded cylindrical shell are compared with available published results.Good agreement is obtained.The effects of the power law index,the wave numbers along the x-and θ-directions,and the thickness-to-radius ratio on the natural frequencies of the simply supported rotating functionally graded cylindrical shell are investigated by several numerical examples.It is found that the fundamental frequencies of the backward waves increase with the increasing rotating speed,the fundamental frequencies of the forward waves decrease with the increasing rotating speed,and the forward and backward waves frequencies increase with the increasing thickness-to-radius ratio.     

Several three-dimensional solutions for transversely isotropic functionally graded material plate welded with circular inclusion

The problem of a transversely isotropic functionally graded material (FGM) plate welded with a circular inclusion is considered. The analysis starts with the generalized England-Spencer plate theory for transversely isotropic FGM plates, which expresses a three-dimensional (3D) general solution in terms of four analytic functions. Several analytical solutions are then obtained for an infinite FGM plate welded with a circular inclusion and subjected to the loads at infinity. Three different cases are considered, i.e., a rigid circular inclusion fixed in the space, a rigid circular inclusion rotating about the x-, y-, and z-axes, and an elastic circular inclusion with different material constants from the plate itself. The static responses of the plate and/or the inclusion are investigated through numerical examples.