A lattice deformation based model of metallic lattice sandwich plates subjected to impulsive loading

A lattice structure deformation mechanism based theoretical model is developed to predict the dynamic response of square lattice sandwich plates under impulsive loading. The analytical model is established on the basis of the three-stage framework proposed by Fleck and Deshpande (2004). In the first stage, the impulse transmitted from air shock loading to the sandwich plates by fluid-structure interaction is analytically calculated. The lattice core suffers non-uniform compression in the second stage due to the clamped boundary conditions. The structure deformation mechanism is introduced in the lattice core compression and the analytical nominal stress–strain curve of core compression accords well with previous experimental results. In the final stage, the sandwich plate is analyzed as a continuum plate with non-uniform thickness deduced by inconsistent deformation of the front and back sheets.The experiment results of square metallic sandwich plates with tetrahedral lattice core are presented and compared with analytical prediction to validate the theoretical model. Good agreements are found between the predicted and testing results for both the impulse transmitted to the sandwich plates and the maximum deflection of the back face sheet.     

The impulsive response of sandwich beams: Analytical and numerical investigation of regimes of behaviour

An analytical model is developed to classify the impulsive response of sandwich beams based on the relative time-scales of core compression and the bending/stretching response of the sandwich beam. It is shown that an overlap in time scales leads to a coupled response and to the possibility of an enhanced shock resistance. Four regimes of behaviour are defined: decoupled responses with the sandwich core densifying partially or completely, and coupled responses with partial or full core densification. These regimes are marked on maps with axes chosen from the sandwich beam transverse core strength, the sandwich beam aspect ratio and the level of blast impulse. In addition to predicting the time-scales involved in the response of the sandwich beam, the analytical model is used to estimate the back face deflection, the degree of core compression and the magnitude of the support reactions. The predictions of the analytical model are compared with finite element (FE) simulations of impulsively loaded sandwich beams comprising an anisotropic foam core and elastic, ideally plastic face-sheets. The analytical and numerical predictions are in good agreement up to the end of core compression. However, the analytical model under-predicts the peak back face deflection and over-predicts the support reactions, especially for sandwich beams with high strength cores. The FE calculations are employed to construct design charts to select the optimum transverse core strength that either minimises the back face deflections or support reactions for a given sandwich beam aspect ratio or blast impulse. Typically, the value of the transverse core strength that minimises the back face deflection also minimises the support reactions. However, the optimal core strength depends on the level of blast impulse, with higher strength cores required for greater blasts.     

Underwater blast loading of sandwich beams: Regimes of behaviour

Finite element (FE) calculations are used to develop a comprehensive understanding of the dynamic response of sandwich beams subjected to underwater blast loading, including the effects of fluid–structure interaction. Design maps are constructed to show the regimes of behaviour over a broad range of loading intensity, sandwich panel geometry and material strength. Over the entire range of parameters investigated, the time-scale associated with the initial fluid–structure interaction phase up to the instant of first cavitation in the fluid is much smaller than the time-scales associated with the core compression and the bending/stretching responses of the sandwich beam. Consequently, this initial fluid–structure interaction phase decouples from the subsequent phases of response. Four regimes of behaviour exist: the period of sandwich core compression either couples or decouples with the period of the beam bending, and the core either densifies partially or fully. These regimes of behaviour are charted on maps using axes of blast impulse and core strength. The simulations indicate that continued loading by the fluid during the core compression phase and the beam bending/stretching phase cannot be neglected. Consequently, analyses that neglect full fluid–structure interaction during the structural responses provide only estimates of performance metrics such as back face deflection and reaction forces at the supports. The calculations here also indicate that appropriately designed sandwich beams undergo significantly smaller back face deflections and exert smaller support forces than monolithic beams of equal mass. The optimum transverse core strength is determined for minimizing the back face deflection or support reactions at a given blast impulse. Typically, the transverse core strength that minimizes back face deflection is 40% below the value that minimizes the support reaction. Moreover, the optimal core strength depends upon the level of blast impulse, with higher strength cores required for higher intensity blasts.     

Blast Performance of Sandwich Composites with In-Plane Compressive Loading

An experimental investigation was conducted to evaluate the dynamic performance of E-glass Vinyl Ester composite face sheet / foam core sandwich panels when subjected to pre-compression and subsequent blast loading. The sandwich panels were subjected to 0 kN, 15 kN and 25 kN of in plane compression respectively, prior to transverse blast wave loading with peak incident pressure of 1 MPa and velocity of 3 Mach. The blast loading was generated using a shock tube facility. During the experiments, a high-speed photographic system utilizing three digital cameras was used to acquire the real-time 3-D deformation of the sandwich panels. The 3D Digital Image Correlation (DIC) technique was used to quantify the back face out-of-plane deflection and in-plane strain. The results showed that in-plane compressive loading facilitated buckling and failure in the front face sheet. This mechanism greatly reduced the blast resistance of sandwich composites.     

撞击载荷下泡沫铝夹层板的动力响应

应用泡沫金属子弹撞击加载的方式研究了固支方形夹层板和等质量实体板的动力响应,分别应用激光测速装置和位移传感器测量了泡沫子弹的撞击速度和后面板中心点的位移历史,给出了夹层板的变形与失效模式,研究了子弹冲量、面板厚度、泡沫芯层厚度及芯层密度对夹层板抗撞击性能的影响。结果表明,后面板中心点挠度最大,周边最小,整体变形为穹形,且伴有花瓣形的变形。参数研究表明,通过增加面板厚度或芯层厚度均能有效控制后面板的挠度,改善夹层板的能量吸收能力,结构响应对子弹冲量和芯层密度比较敏感。实验结果对多孔金属夹层结构的优化设计具有一定的参考价值。 更多还原     

ELASTIC-PLASTIC DYNAMIC RESPONSE OF FULLY BACKED SANDWICH PLATES UNDER LOCALIZED IMPULSIVE LOADING

An analytical model is developed to assess the elastic-plastic dynamic response of fully backed sandwich plates under localized impulse load.The core is modeled as an elastic-perfectly plastic foundation.The top face sheet is treated as an individual plate resting on the foundation.The elastic-plastic analysis for the top face sheet is based on a minimum principle in dynamic plasticity associated with the finite difference technique.The effects of spatial and temporal distributions of the impulsive loading on the dynamic response of sandwich plates are discussed.The model can be used to predict the impulse-induced local effect on fully backed sandwich plates.     

Sandwich Panel Cores for Blast Applications: Materials and Graded Density

Sandwich composites are of interest in marine applications due to their high strength-to-weight ratio and tailorable mechanical properties, but their resistance to air blast loading is not well understood. Full-scale 100 kg TNT equivalent air blast testing at a 15 m stand-off distance was performed on glass-fibre reinforced polymer (GFRP) sandwich panels with polyvinyl chloride (PVC); polymethacrylimid (PMI); and styrene acrylonitrile (SAN) foam cores, all possessing the same thickness and density. Further testing was performed to assess the blast resistance of a sandwich panel containing a stepwise graded density SAN foam core, increasing in density away from the blast facing side. Finally a sandwich panel containing compliant polypropylene (PP) fibres within the GFRP front face-sheet, was subjected to blast loading with the intention of preventing front face-sheet cracking during blast. Measurements of the sandwich panel responses were made using high-speed digital image correlation (DIC), and post-blast damage was assessed by sectioning the sandwich panels and mapping the damage observed. It was concluded that all cores are effective in improving blast tolerance and that the SAN core was the most blast tolerant out of the three foam polymer types, with the DIC results showing a lower deflection measured during blast, and post-blast visual inspections showing less damage suffered. By grading the density of the core it was found that through thickness crack propagation was mitigated, as well as damage in the higher density foam layers, thus resulting in a smoother back face-sheet deflection profile. By incorporating compliant PP fibres into the front face-sheet, cracking was prevented in the GFRP, despite damage being present in the core and the interfaces between the core and face-sheets.     

Effect of Facesheet Thickness on Dynamic Response of Composite Sandwich Plates to Underwater Impulsive Loading

The response of sandwich structures to underwater blast loading is analyzed. The analysis focuses on the effect of varying structural attributes on energy dissipation and deformation. The structures analyzed are planar sandwich plates with polymer foam cores and fiber-reinforced polymer composite facesheets. The thickness of the facesheets is varied under the conditions of constant material properties and core dimensions. The fully three-dimensional finite-element simulations carried out account for underwater blast loading through the use of the Mie-Gruneisen equation-of-state of a linear Hugoniot form and a modified Drucker-Prager core crushing model. The impulse imparted to the panels is varied from 4 to 42 kPa·s. The results show that there exists an optimal thickness of the facesheets which maximizes energy absorption in the core and minimizes the overall deflection of the structure.     

The Effects of Air and Underwater Blast on Composite Sandwich Panels and Tubular Laminate Structures

The resistance of glass-fibre reinforced polymer (GFRP) sandwich panels and laminate tubes to blast in air and underwater environments has been studied. Procedures for monitoring the structural response of such materials during blast events have been devised. High-speed photography was employed during the air-blast loading of GFRP sandwich panels, in conjunction with digital image correlation (DIC), to monitor the deformation of these structures under shock loading. Failure mechanisms have been revealed by using DIC and confirmed in post-test sectioning. Strain gauges were used to monitor the structural response of similar sandwich materials and GFRP tubular laminates during underwater shocks. The effect of the backing medium (air or water) of the target facing the shock has been identified during these studies. Mechanisms of failure have been established such as core crushing, skin/core cracking, delamination and fibre breakage. Strain gauge data supported the mechanisms for such damage. These studies were part of a research programme sponsored by the Office of Naval Research (ONR) investigating blast loading of composite naval structures. The full-scale experimental results presented here will aid and assist in the development of analytical and computational models. Furthermore, it highlights the importance of support and boundary conditions with regards to blast resistant design.     

Dynamic response of clamped sandwich beams: analytical modeling

An improved analytical model is developed to predict the dynamic response of clamped lightweight sandwich beams with cellular cores subjected to shock loading over the entire span.The clamped face sheets are simplified as a single-degree-of-freedom(SDOF) system, and the core is idealized using the rigid-perfectly-plastic-locking(RPPL) model. Reflection of incident shock wave is considered by incorporating the bending/stretching resistance of the front face sheet and compaction of the core. The model is validated with existing analytical predictions and FE simulation results, with good agreement achieved. Compared with existing analytical models, the proposed model exhibits superiority in two aspects: the deformation resistance of front face sheet during shock wave reflection is taken into account; the effect of pulse shape is considered. The practical application range of the proposed model is therefore wider.     

冲击波与破片对波纹杂交夹层板的联合毁伤数值研究

通过有限元软件LS-DYNA模拟了波纹杂交夹层板在冲击波与破片联合作用下的响应过程,研究了炸药当量、载荷类型和填充方式对波纹杂交夹层板变形与失效模式的影响,并与实体板、间隔板和波纹夹层板的抗联合毁伤性能进行了对比,讨论了波纹杂交夹层板的能量吸收特性。数值计算结果表明:与冲击波单独作用相比,破片群单独作用和冲击波与破片联合作用对结构造成的毁伤更为严重;当药量较小时,波纹夹层板和波纹杂交夹层板的抗联合毁伤性能优于实体板与间隔板,波纹杂交夹层板的抗联合毁伤性能从全填充、迎爆面填充到背爆面填充逐渐降低;当药量较大时,所有结构均产生破口失效;在能量耗散方面,冲击波单独作用时以波纹芯层吸能为主,破片群单独作用和冲击波与破片联合作用时以上面板吸能为主。     

PVC夹芯板在冲击载荷下的动态响应与失效模式

通过开展对泡沫金属子弹撞击加载聚氯乙烯(polyvinyl chloride, PVC)夹芯板的实验,结合三维数字图像相关性(three dimensional digital image correlation, DIC-3D)技术,研究固支夹芯板在撞击加载条件下的动态响应,获得夹芯板受撞击及响应的变形过程,并结合图像分别分析夹芯板整体及三层结构的变形和失效模式;研究子弹冲量与背板最终变形之间的关系和相似冲量下等面密度不同芯层密度的夹芯结构的抗撞击性能。结果表明:夹芯板的破坏和失效主要集中在泡沫金属子弹直接作用区域,背板挠度由中间向固定端逐渐减小,子弹冲量与背板变形近似成线性关系。在等质量的条件下,降低芯层密度、增加芯层厚度可以有效降低背板的变形,实验结果对聚合物夹芯结构的工程优化设计具有一定的参考意义。     

One-dimensional analytical model for the response of elastic coatings to water blast

In previous studies, the response of sandwich structures to water blast is solved by envisaging the plate adjacent to water as a rigid one, while the effects of the elasticity in the longitudinal direction of the plate are rarely studied. In this paper, a monolithic elastic coating with varying stiffness and thickness is investigated by a one-dimensional analytical approach, based on linear wave motion theory, to reveal the elastic effect of the plate on the incident wave. One side of the coating is loaded by a planar shock wave; on the opposite side, rigid boundary or air-backed boundary is imposed. The fluid–structure interaction (FSI), cavitation phenomenon and large deformation of the coating are taken into account. In particular, the initiation and evolution of cavitation, including the propagations of breaking fronts and closing fronts, as well as the pressure histories of radiated wave by the closing front, are examined. The analytical solution has been compared with finite element (FE) predictions. The results are found to be in excellent agreement for the propagation of breaking front and closing front, as well as the pressure and particle velocity histories at the wet face before the cavitation reaches the wet face. However, when the wet face cavitates, the predictions provided by the analytical method are less accurate and the analytically-computed particle velocity can only be compared in an average sense with the FE predictions. For air-backed case, Taylor׳s model prior to cavitation becomes a trivial case of the analytical model and the comparison also indicates the validity of the analytical model. The validated analytical model is used to determine the dependence of the peak pressure at the wet face and the impulse transmitted to the coating on the coating properties, including the wave impedance and thickness.     

梯度蜂窝夹芯板在爆炸荷载作用下的动力响应

利用弹道冲击摆锤系统对分层梯度蜂窝夹芯板在爆炸荷载下的动力响应进行了实验研究,分析了梯度蜂窝夹芯板在爆炸荷载作用下的变形失效模式,并与传统非梯度蜂窝夹芯板的抗爆性能做了对比。通过一维应力波理论,分析了应力波在梯度芯层中的传播规律。应力波透射系数在梯度试件中比非梯度芯层中小,而且相对密度递减的芯层组合有最小的应力波透射系数。综合考虑结构变形失效模式,后面板挠度,芯层压缩量以及应力波传播特点得到:分层梯度蜂窝夹芯板的抗爆性能明显优于传统的非梯度夹芯板,在所研究的荷载范围内,芯层相对密度从大到小排列试件的抗爆性能相对较好。     

Blast Mitigation in a Sandwich Composite Using Graded Core and Polyurea Interlayer

The dynamic behavior of two types of sandwich composites made of E-Glass Vinyl-Ester (EVE) facesheets and Corecell™ A-series foam with a polyurea interlayer was studied using a shock tube apparatus. The materials, as well as the core layer arrangements, were identical, with the only difference arising in the location of the polyurea interlayer. The foam core itself was layered with monotonically increasing wave impedance of the core layers, with the lowest wave impedance facing the shock loading. For configuration 1, the polyurea interlayer was placed behind the front facesheet, in front of the foam core, while in configuration 2 it was placed behind the foam core, in front of the back facesheet. A high-speed side-view camera, along with a high-speed back-view 3-D Digital Image Correlation (DIC) system, was utilized to capture the real time deformation process as well as mechanisms of failure. Post mortem analysis was also carried out to evaluate the overall blast performance of these two configurations. The results indicated that applying polyurea behind the foam core and in front of the back facesheet will reduce the back face deflection, particle velocity, and in-plane strain, thus improving the overall blast performance and maintaining structural integrity.     

One-dimensional response of sandwich plates to underwater shock loading

The one-dimensional shock response of sandwich plates is investigated for the case of identical face sheets separated by a compressible foam core. The dynamic response of the sandwich plates is analysed for front face impulsive loading, and the effect of strain hardening of the core material is determined. For realistic ratios of core mass to face sheet mass, it is found that the strain hardening capacity of the core has a negligible effect upon the average through-thickness compressive strain developed within the core. Consequently, it suffices to model the core as an ideally plastic-locking solid. The one-dimensional response of sandwich plates subjected to an underwater pressure pulse is investigated by both a lumped parameter model and a finite element (FE) model. Unlike the monolithic plate case, cavitation does not occur at the fluid-structure interface, and the sandwich plates remain loaded by fluid until the end of the core compression phase. The momentum transmitted to the sandwich plate increases with increasing core strength, suggesting that weak sandwich cores may enhance the underwater shock resistance of sandwich plates.     

Finite element analysis of the dynamic response of clamped sandwich beams subject to shock loading

The finite element (FE) method is employed to analyse the response of clamped sandwich beams subject to shock loadings. Pressure versus time histories representative of shock loadings are applied uniformly to the outer face of the sandwich beam; an impulse applied uniformly to the outer face of the sandwich beam is shown to model adequately shock loadings. Material elasticity and strain hardening representative of structural steels have only a minor effect upon the beam response. Further, the magnitude of the compressive strength of the core has only a limited influence upon the dynamic response of the sandwich beam for the representative range of core strengths considered. The FE results for the deflections and structural response time agree well with the rigid ideally-plastic analytical predictions of Fleck and Deshpande (J. Appl. Mech. (2003), in press).     

Impulsive loading of clamped monolithic and sandwich beams over a central patch

An analytical model is developed for the response of clamped monolithic and sandwich beams subjected to impulse loading over a central loading patch. A number of topologies of sandwich core are investigated, including the honeycomb core, pyramidal core, prismatic diamond core and metal foam. The various cores are characterised by their dependencies of through-thickness compressive strength and longitudinal tensile strength upon relative density. Closed-form expressions are derived for the deflection of the beam when the ratio r of length of loading patch to the beam span exceeds 0.5. In contrast, an ordinary differential equation needs to be solved numerically for the choice r<0.5. Explicit finite element calculations show that most practical shock loadings can be treated as impulsive and the accuracy of the impulsive analytical predictions is confirmed. The analytical formulae are employed to determine optimal geometries of the sandwich beams that maximise the shock resistance of the beams for a given mass. The optimisation reveals that sandwich beams have a superior shock resistance relative to monolithic beams of the same mass, with the prismatic diamond core sandwich beam providing the best performance. Further, the optimal sandwich beam designs are only mildly sensitive to the length of the loading patch.     

Point-wise impulse (blast) response of a composite sandwich plate including core compressibility effects

This work analyzes the nonlinear impulse response of a composite sandwich plate exposed to a sudden point-wise transverse loading on the top face sheet. The nonlinearity arising from the core compressibility in the thickness direction is modeled and incorporated into the constitutive relations explicitly. As such, one can have a deep insight regarding the stress, strain and displacement profiles into the sandwich plate. The sandwich plate is assumed to be perfectly bonded at the face sheet/core interfaces. The equations of motion are formulated using Hamilton’s principle. The simply supported case is used to illustrate the procedure for solving the nonlinear equations. Numerical results are presented to demonstrate the response in terms of the transverse deformation and stresses in the composite sandwich plate. The effects of the variation of the geometrical parameters of the structure on the blast impulse response are also studied. Some conclusions are suggested regarding the associated optimal design of sandwich plates.     

泡沫金属夹芯梁在重复冲击下的动态响应

为了研究重复冲击载荷作用下泡沫金属夹芯梁的动态响应,采用Abaqus数值仿真软件,基于可压碎泡沫模型（crushable foam）,建立了泡沫金属夹芯梁遭受楔形质量块冲击的有限元模型。通过将仿真获得的夹芯梁上下面板最终挠度与重复冲击实验结果进行对比,验证仿真方法的准确性。在此基础之上,分析了泡沫金属夹芯梁在楔形质量块重复冲击作用下的变形模式、加卸载过程以及能量耗散特性。结果表明,在重复冲击载荷作用下,夹芯梁的变形不断累积,上面板主要出现局部凹陷和整体弯曲,而芯层则是局部压缩,下面板表现为整体弯曲。在重复加卸载过程中,加卸载刚度随着冲击次数的增加而增大。随着冲击次数的增加,上面板和芯层的能量吸收增量不断减小,而下面板的能量吸收增量不断增加,且最终均趋于稳定。泡沫金属夹芯梁的塑性变形能增量不断减小,而回弹系数随着冲击次数逐渐增加,最后趋于稳定值。