一种全光归零码到非归零码变换的新技术方案

报道了一种利用单只半导体光放大器和光滤波器实现全光归零码到非归零码变换的新技术方案.当探测（Probe）光和数据信号光同时输入到SOA时,基于SOA中的交叉增益调制和交叉相位调制现象,探测光光谱的后沿和前沿将分别产生红移和蓝移.通过调节光滤波器和探测光的中心波长之间的失调量,滤出光谱的特定部分,可以得到转换后的NRZ码光信号.这种新型的全光码型变换器具有结构简单、偏振不敏感、控制参量少和稳定性高的特点.分别采用仿真和实验的方式实现了20 Gbit/s光数据信号从RZ码到NRZ码的全光码型变换,并且仿真结果和实验结果相吻合.     

Generation of 10-GHz duty-cycle tunable square optical pulse in an SOA-based mode-locked fiber laser

We demonstrate the generation of 10-GHz optical square pulses by injecting a picosecond pulse train into an SOA-based mode-locked fiber laser. The novel scheme exploits nonlinear effects and gain saturation phenomenon in the semiconductor optical amplifier (SOA). This technique uses gain-compression dynamics between the input pulses and the generated ones in gain-saturated SOA to form square pulses. The center wavelength of the generated optical square pulse can be tuned from 1530 to 1570 nm by adjusting the center wavelength of the optical band pass filter (OBPF) in the SOA-based mode-locked fiber ring laser. The duty cycle of the output pulse can be tuned from 12.7 to 88.4%, which strongly depends on the input power and intra-cavity power.     

Broadly Tunable SOA-Based Active Mode-Locked Fibre Ring aser by Forward Injection Optical Pulse

We present a broadly tunable active mode-locked fibre ring laser based on a semiconductor optical amplifier （SOA）, with forward injection optical pulses. The laser can generate pulse sequence with pulsewidth about 12ps and high output power up to 8.56 dBm at 2.5 GHz stably. Incorporated with a wavelength-tunable optical bandpass filter, the pulse laser can operate with a broad wavelength tunable span up to 37nm with almost constant pulsewidth. A detailed experimental analysis is also carried out to investigate the relationship between the power of the internal cavity and the pulsewidth of the output pulse sequence. The experimental configuration of the pulse laser is very simple and easy to setup with no polarization-sensitive components.     

基于半导体光放大器和光滤波器的全光非归零码到归零码的转换

利用半导体光放大器模型和仿真软件对全光非归零码到归零码的变换进行了数值仿真.在仿真结果的基础上,实现了基于半导体光放大器和光滤波器的10 Gbps的全光非归零码到归零码的变换试验.试验结果显示在RZ码输入功率为－15 dBm时,该变换的误码率为1.0×10－9.     

Tunable 19 × 10 GHz L-band FP-SOA based multi-wavelength mode-locked fiber laser

We present a multi-wavelength mode-locked fiber ring laser incorporating a semiconductor optical amplifier (SOA) and a Fabry-Perot semiconductor optical amplifier (FP-SOA). Because the gain of the SOA is depleted by an external injection optical signal, the SOA acts as a loss modulator. The FP-SOA serves as a tunable comb filter. The presented laser source can generate 19 synchronized wavelength channels with the extinction ratio of about 21 dB, each mode-locked at 10 GHz, and mode-locked pulse width is about 40 ps. Oscillation wavelengths band can be tuned by adjusting the bias current of the SOA, and wavelength spacing also can be changed by using a tunable optical delay line (ODL) or a temperature controller. The polarization-insensitive devices ensure that the output power is rather stable. This fiber laser has potential applications in longer waveband (L-band) within the low-attenuation window.     

Single SOA based all-optical adder assisted by optical bandpass filter: Theoretical analysis and performance optimization

A simple and compact configuration of all-optical adders implemented with a single semiconductor optical amplifier (SOA) and optical bandpass filter (OBF) is presented in this paper. A comprehensive SOA model is put forward to investigate the output characteristics of the all-optical adders. The numerical simulation results demonstrate the influence of these key parameters, including input pulse peak power, pulsewidth, repetition rate, and OBF characteristics. Moreover some design rules are extracted for the proper selection of these parameters so as to ensure optimum performance. The obtained results confirm the feasibility of our configuration.     

Optical ultrawideband monocycle pulse generation based on cross-gain modulation in a semiconductor optical amplifier

A novel method for generating ultrawideband (UWB) monocycle pulses based on cross-gain modulation (XGM) in a semiconductor optical amplifier (SOA) is proposed and experimentally demonstrated. Thanks to the XGM in the SOA, a pair of polarity-reversed optical Gaussian pulses is generated at the output of the SOA, to which a Gaussian pulse pump and a continuous-wave probe are applied. The two polarity-reversed optical pulses are then time delayed by two cascaded fiber Bragg gratings to introduce a time delay difference. A UWB monocycle pulse with a full width at half-maximum of 48 ps and a fractional bandwidth of 188% is generated at the output of a high-speed photodetector.     

Design of ultrafast all-optical PolSK DMUX based on semiconductor optical amplifiers

A novel ultrahigh-speed all-optical demultiplexer (DMUX) with polarization-shift-keying (PolSK) modulation input signals is proposed. This design is based on four-wave mixing (FWM) in a semiconductor optical amplifier (SOA). For analyzing each amplifier, we use finite-difference method (FDM) based on solution of the traveling wave coupled equations. Using numerical simulation, the all-optical DMUX is theoretically realized at 40 Gb/s. We also study the relation between optical confinement factor and thickness of active layer of the SOA section successfully, and investigate the increasing effect of confinement factor on the DMUX optical output power. With this work, the confinement factor is increased from 0.3 to 0.48, and as a result, the output power approximately twice of its initial value is achieved. Moreover, the effects of polarization dependence of SOA on the output performance of all-optical DMUX for PolSK signal are theoretically investigated in detail.     

Theoretical analysis of pattern effect suppression in semiconductor optical amplifier utilizing optical delay interferometer

The ability of an optical delay interferometer (ODI) to suppress the pattern effect that is inherently present in a straightforward, solitary semiconductor optical amplifier (SOA) whose dynamic response is slower than the period of its driving high-speed return-to-zero (RZ) data signal is theoretically investigated. For this purpose an existing comprehensive model that simulates and links the operation of these two elements is methodically applied to their concatenated configuration. In this manner an extensive set of curves is numerically obtained, which allow to analyze and assess the impact of the input pulse energy and width as well as of the SOA carrier lifetime, linewidth enhancement factor and small signal gain on the amplitude modulation of the transmitted sequence at the output of each one of these block units. Their thorough study and interpretation reveals that the employment of the ODI can significantly reduce the value of this quality metric resulting from a single SOA only. The main offered benefit, however, is that any technical restrictions regarding the involved critical parameters can be considerably relaxed while at the same time their useful operational range can be extended. These important findings highlight the necessity of placing this passive device after the SOA and exploiting it in order to effectively alleviate the detrimental pattern-dependent degradation. This fact in conjunction with its overall practicality renders it a promising candidate for enhancing, within the frame of the proposed scheme, the performance of SOAs that are employed as pure amplification elements in fiber-optic communication systems and networking applications.     

Novel 160-GHz wavelength converter based on a SOA and a long period grating

The proposed converter is based on cross-phase modulation (XPM) in a semiconductor optical amplifier (SOA). The predominantly phase-encoded signal at the SOA output is converted to a purely amplitude-modulated signal using a long period grating. First, we design the converter in terms of power conversion efficiency and pulse pedestal suppression. Subsequent analysis for the delayed-interference signal-wavelength converter (DISC) revealed that our device offers 5 dB higher power conversion efficiency and gives shorter pulses at the converter output. In the proof-of-principle experiment, good agreement with the theoretical predictions is obtained.     

Spectrum reshaping of amplified pulse in silicon nanowaveguide

A device consisting of a cascaded semiconductor optical amplifier (SOA) and silicon on insulator (SOI) optical waveguide is presented to amplify and reshape the frequency spectrum of optical pulses in the picoseconds time duration. Numerical simulations show that the output spectrum of the amplified pulse by SOA can be effectively reshaped by utilizing the SOI waveguide. The length of the SOI waveguide may be judiciously adjusted to significantly reduce the frequency chirp of the output pulse from the SOA resulting in reshaping of the output spectrum. We find that the property of pulse spectrum is sensitive to the input pulse power and its temporal width.     

40 Gb/s信号全光3R再生实验

提出一种新型40 Gb/s全光3R再生器方案。采用高精细度法布里-珀罗滤波器进行时钟提取。时钟提取前,通过高稳定光源对输入信号光波长变换实现信号光波长和法布里-珀罗滤波器梳状窗口对准;时钟提取后,接半导体光放大器(SOA)进一步消除时钟信号噪声。全光判决中,采用双半导体光放大器串联增大非线性性能,提高了判决门的响应速度。判决输出接窄带滤波器去除脉冲啁啾拖尾,减小码型效应。实验中,恶化40 Gb/s光脉冲信号通过全光3R再生器可以得到再生脉冲。输入恶化信号时间抖动大于5 ps,脉冲宽度大于16 ps,再生得到的信号时间抖动小于1.5 ps。再生信号相对于输入信噪比改善14 dB。连续稳定工作记录大于15 h。通过实验验证,这种全光3R再生器方案成功地实现了40 Gb/s信号的再生。     

All-optical ultrawideband monocycle generation utilizing gain saturation of a dark return-to-zero signal in a semiconductor optical amplifier

We demonstrate a simple and compact scheme to generate ultrawideband (UWB) monocycle pulses utilizing gain saturation of a dark return-to-zero (RZ) signal in a semiconductor optical amplifier (SOA). When optical pulses with a dark RZ format propagate through the SOA, the output power at the rising edge will be overamplified compared with that at other durations due to the gain unsaturation. As a result, the output pulses are monocyclelike. The UWB frequency spectra at different injected currents, different input pulse widths, and different input wavelengths are analyzed. Our experiments show that the monocycle generation has good tolerance to the SOA bias current and the input signal wavelength.     

基于半导体光放大器的非归零信号时钟恢复

提出了一种基于半导体光放大器加窄带光纤光栅滤波器,将非归零信号转换为伪归零信号,再把伪归零信号注入到主动锁模环行腔激光器进行时钟提取的非归零信号时钟恢复方案.利用该方案实现了10 Gb/s伪随机非归零信号的全光时钟恢复,对工作原理和结果进行了分析和讨论.实验证明该方案具有结构简单,调整容易,输出波形好的特点.     

SOA-based actively mode-locked fiber ring laser by forward injecting an external pulse train

An actively mode-locked fiber ring laser based on cross-gain modulation (XGM) in a semiconductor optical amplifier (SOA) is demonstrated to operate stably with a simple configuration. By forward injecting an easily-generated external pulse train, the mode-locked fiber laser can generate an optical-pulse sequence with pulsewidth about 6 ps and average output power about 7.9 mW. The output pulses show an ultra-low RMS jitter about 70.7 fs measured by a RF spectrum analyzer. The use of the proposed forward-injection configuration can realize the repetition-rate tunability from 1 to 15 GHz for the generated optical-pulse sequences. By employing a wavelength-tunable optical band-pass filter in the laser cavity, the operation wavelength of the designed SOA-based actively mode-locked fiber laser can be tuned continuously in a wide span between 1528 and 1565 nm. The parameters of external-injection optical pulses are studied experimentally to optimize the mode-locked fiber laser.     

Analysis of ultrafast nonlinear phenomena��s influences on output optical pulses and four-wave mixing characteristics in semiconductor optical amplifiers

We have analysed the output pulse characteristics of semiconductor optical amplifier (SOA). It is shown that they can be modified due to the variation of input parameters, such as, gain, input pulsewidth, input pulse energy and effects imposed by the medium. Therefore, the influence of these parameters are analysed on the output pulse shape, spectrum, chirp and pulsewidth. We have used the nonlinear propagation equation taking into account the gain spectrum dynamics, gain saturation which depends on carrier depletion, carrier heating, spectral hole-burning, group velocity dispersion, self-phase modulation and two photon absorption. We have used the finite-difference beam propagation method to simulate the wave evolution both in time and spectral domain in the SOA. We have also simulated the four-wave mixing characteristics between pulses for various input pulses. An accurate output pulse shape can be achieved by controlling the mentioned parameters. To the authors knowledge, pulse shaping in co-propagation regime due to medium effect and input pulse shapes in presence of all nonlinear effects relevant to picosecond regime have been studied comprehensively, for the first time in this work.     

增益半导体光放大器的特性

为满足半导体光放大器（SOA）在光纤到户FTTH系统接入网中的广泛应用,提出了基于光纤光栅外腔反馈型GC-SOA结构的全光增益机制,窄线宽激光光源经可变衰减器、隔离器和光纤光栅注入到SOA中,SOA的输出光经隔离器和光纤光栅送至光谱分析仪,通过光纤光栅反馈输入SOA形成钳制激光。对GC-SOA的阈值特性、增益特性及开关特性进行分析,结果表明:当注入电流小于GC-SOA的阈值电流时,增益随注入电流的增加而增加;当注入电流大于GC-SOA的阈值电流后,其增益不再随注入电流的变化而变化,实现了SOA的增益稳定,使SOA的饱和输出功率得到了提高。     

40-GHz wavelength tunable mode-locked SOA-based fiber laser with 40-nm tuning range

A 40-GHz wavelength tunable mode-locked fiber ring laser based on cross-gain modulation in a semiconductor optical amplifier (SOA) is presented. Pulse trains with a pulse width of 10.5 ps at 40-GHz repetition frequency are obtained. The laser operates with almost 40-nm tuning range. The relationship between the key laser parameters and the output pulse characteristics is analyzed experimentally.     

基于SOA和NOLM的光脉冲放大与压缩的设计模型

设计了一种基于半导体光放大器(SOA)和非线性光学环镜(NOLM)的光脉冲放大与压缩的模型。数值研究结果表明:在NOLM中,当调节合适的控制脉冲的输入和初始时延时,具有较低峰值功率、宽度为几十皮秒的高斯信号脉冲经此模型放大压缩后,可以得到脉冲峰值增益高、脉冲宽度窄以及基本无基座的高质量超短信号光脉冲。     

Experimental study of SOA-based NRZ-to-PRZ conversion and distortion elimination of amplified NRZ signal using spectral filtering

We experimentally study both reshaping of nonreturn-to-zero (NRZ) signal and NRZ to pseudoreturn-to-zero (PRZ) format conversion based on self-phase modulation of a semiconductor optical amplifier (SOA) and detuning an optical bandpass filter (OBF). When an OBF with 1 nm bandwidth is blue shifted by 0.8 nm, the distortion of the amplified NRZ signal at 10 Gbit/s is shown to be eliminated completely. When an OBF with 0.32 nm bandwidth is red shifted by 0.42 nm from the carrier frequency, NRZ-to-PRZ conversion at 10 Gbit/s is obtained. A holding beam is used to suppress the SOA noise and improve the output extinction ratio (ER). The output ER of both the reshaped NRZ and the converted PRZ is larger than 10 dB when the signal wavelength is longer than 1540 nm, and an input power dynamic range from −7 dBm to 2 dBm is obtained at a signal wavelength of 1563.6 nm. The average power of the reshaped NRZ signal is about 3 dBm at an input power dynamic range of 13 dB. The amplitude fluctuation of the converted PRZ signal is around 1.6 dB.