Interaction of gold nanoparticles with mitochondria

Mitochondrion is one of the most important organelles in cells with several vital responsibilities. The consequence of a deficiency in the function of mitochondrion could result with the wide range of diseases and disorders. In this study, we investigated the feasibility of utilizing surface-enhanced Raman scattering (SERS) to understand the mode of interaction of gold nanoparticles (GNPs) with mitochondria. The living lung cancer cells and the isolated mitochondria from these cells were treated with gold colloidal suspension for SERS experiments. The AFM images of the mitochondria confirmed that the treatment did not cause substantial damage to mitochondria. The localization of GNPs in living cells is investigated with confocal microscopy and found that GNPs form aggregates in the cytosol away from the mitochondria. However, SERS spectra obtained from isolated mitochondria and living cells indicate that GNPs escaped from the endosomes or entered into the living cell through another route may be in contact with mitochondria in a living cell. The findings of this study indicate that SERS can be used for mitochondrial research.     

Solution ionic strength effect on gold nanoparticle solution color transition

Unmodified and modified gold nanoparticles are proposed as sensors using the red to blue transition as an indicator. This work indicates that ionic content is an important variable to track in analytical samples and during the sensor fabrication processes. Mono and multivalent salts where the titrants for a standard gold nanoparticle solution. Multivalent cation salt titrants exhibited a greater sensitivity to color change than monovalent cation salts. The data suggest that specific surface adsorption is the predominant mechanism for the red to blue color change not aggregation. The 3-7 nm Debye length for divalent cations versus the 0.5-1.5 nm for monovalent cations indicates surface electrodynamic resonance effects are an important factor in the observed color changes.     

Thermal modification of layer-by-layer assembled gold nanoparticle films

Gold nanoparticle films are assembled on glass and quartz substrates by a simple and highly efficient layer-by-layer deposition procedure that uses only commercially available cationic polymers. The film samples are then modified by heat curing in the temperature range of 25–1100 °C. The changes in the film conductance and colour with the curing temperature are related to the respective changes in micro-morphology of films on quartz as observed by scanning electron microscopy. In addition, we have demonstrated that the heat curing can embed the gold nanoparticle layer in the glass substrates. Because of the preparation simplicity and peculiar properties of these films, they could be used in various practical applications.     

Biosensors elaborated on gold nanoparticles, a PM-IRRAS characterisation of the IgG binding efficiency

This work is focused on studying the grafting of gold nanoparticles (Np) on a cystamine self-assembled monolayer on gold, in order to build sensitive immunosensors. The synthesis and deposition of gold nanoparticles, 13 and 55 nm sizes, were characterised by combining Polarisation Modulation Infrared Reflection-Absorption Spectroscopy (PM-IRRAS), X-ray Photoelectron Spectroscopy (XPS) Surface Enhanced Raman Scattering (SERS), and Atomic Force Microscopy (AFM) which all indicated the formation of a dispersed layer of nanoparticles. This observation is explained by the compromise between the high reactivity of amine-terminated layers towards gold, and interparticle repulsions. Nps were then functionalised with antibody probes, and the recognition by an anti-rIgG was assayed both on planar and Np gold surfaces.The important result is that nanoparticles of 55 nm are preferable for the following reasons: they enable to build a denser and well dispersed layer and they increase both the number of receptors (IgGs) and their accessibility. Beside these geometric improvements, a net enhancement of the Raman signal was observed on the 55 nm nanoparticle layer, making this new platform promising for optical detection based biosensors.     

Synthesis of gold nanoparticle necklaces using linear-dendritic copolymers

Linear-dendritic copolymers containing hyperbranched poly(citric acid) and linear poly(ethylene glycol) blocks (PCA-PEG-PCA) were used as reducing and capping agents to synthesize and support gold nanoparticles (AuNPs). PCA-PEG-PCA copolymers with 1758, 1889 and 3446 molecular weights, called A1, A2 and A3 through this work, respectively, were synthesized using 2, 5, and 10 citric acid/PEG molar ratios. The diameter of A1, A2 and A3 in a fresh water solution was investigated using dynamic light scattering (DLS) and it was between 1.8 and 2.8 nm. AuNPs were simply synthesized and supported by addition a boiling aqueous solution of HAuCl₄ to aqueous solutions of A1, A2 and A3. Supported AuNPs were stable in water for several months and agglomeration was not occurred. The loading capacity of A1, A2 and A3 and the size of synthesized AuNPs were investigated using UV spectroscopy and transmission electron microscopy (TEM). It was found that the loading capacity of PCA-PEG-PCA copolymers depend on the concentration of copolymers and the size of their poly(citric acid) parts directly. For example average loading capacities for 400 μM concentration of A1, A2 and A3 were 32.24, 37.4 and 41.52 μM, respectively, and average loading capacities for 400, 200 and 100 μM concentration of A1 were 32.24, 20.28 and 9.1 μM, respectively. Interestingly there was a reverse relation between the size of synthesized AuNPs and size of poly(citric acid) parts of PCA-PEG-PCA copolymers.     

Adsorption mechanisms of sulfathiazole on gold,silver and copper surfaces studied by SERS

Surface-enhanced Raman scattering (SERS) of sulfathiazole was studied in gold, silver and copper colloids as well as on a gold plate. SERS spectra of sulfathiazole in gold and silver colloids indicated chemisorption of molecules on the metal nanoparticles through the amide nitrogen, with the phenyl moiety orthogonally placed and the thiazole ring almost parallel positioned towards the metal surface. Although selectively enhanced phenyl bands pointed to a very similar position of the sulfathiazole molecules on the copper colloid, a chemical bonding was not implied. Unlike adsorption mechanisms and position of the molecules on the colloid metal surfaces, a sideway adsorption of sulfathiazole on the gold plate was proposed. Hereby, both, the amide nitrogen and the thiazole nitrogen were considered responsible for approaching of sulfathiazole to the gold enhancing surface.     

Self-assembly of lysozyme on the surfaces of gold nanoparticles

The interaction of lysozyme(Lys) and gold nanoparticles was investigated via UV-vis absorption and resonance light-scattering method.There are some changes of the plasmon absorption and resonance light-scattering of gold nanoparticles that were observed via the addition of Lys.The normalized plasmon absorption and resonance light-scattering intensity with gold nanoparticles were both linear wilh 1-20 nmol/L Lys.A simple model about the component of the gold nanoparticles and Lys complex was established and the calculated result was fitted well in their concentration ratio.Furthermore,the activity analysis of Lys showed that the interaction was weak and nondestructive.     

An unusual acetylene–allene rearrangement in iodomethylates of cotarnine acetylene derivatives

1. Download : Download high-res image (94KB)
2. Download : Download full-size image

     

Raman spectroscopy of gold nanoparticle conjugates of cosmetic ingredient kinetin

We performed a feasibility test of the cosmetic ingredient kinetin (KT)-gold nanoparticle (AuNP) conjugates by means of vibrational Raman spectroscopy and quantum mechanical calculations. The adsorptions of KT on AuNP surfaces were examined by absorption spectra and surface-enhanced Raman scattering (SERS). The size of KT at the initial concentrations of 10⁻⁵ M with the AuNP composites was measured to be 22 nm. Density functional theory (DFT) calculations were performed to estimate the energetic stabilities of KT on an Au cluster atom. The two tautomeric forms of 9H-amino and 7H-amino in KT are predicted to have similar energies on Au. The N3-coordinating geometries in both 9H-amino and 7H-amino forms of KT are predicted to be most stable on an Au cluster. Vibrational analysis also suggested that the two tautomers of KT should coexist in the adsorbed state on Au. The concentration-dependent SERS spectra of KT indicated that 5 × 10⁻⁵ M exhibited the highest SERS signals.     

A novel immunoassay strategy based on combination of chitosan and a gold nanoparticle label

A novel immunoassay strategy based on combination of chitosan (CHIT) and a gold nanoparticle (GNP) label has been developed. The susceptibility of CHIT to further chemical modifications due to the abundant amino groups is explored in order to covalently immobilize antibody (Ab) onto the (3-aminopropyl) triethoxysilane derivatized glass slide by cross-linking with glutaraldehyde (GA). After incubating in antigen (Ag) solution, the obtained substrate is immersed in GNP labeled antibody solution for signal generation. The two steps were repeated alternatively for three times, forming multilayer of gold nanoparticles via antigen-antibody specific reaction. Ultraviolet-visible (UV-vis) absorption spectrum is recorded to obtain quantitative information about the specific antigen. The presented immunoassay strategy is applied for determination of human serum albumin (HSA) as a model analyte. The immunoassay of HSA is specific. Compared to previous correlative work, the proposed immunosensing strategy shows some advantages, such as improved sensitivity as much more gold nanoparticles can be coupled to the functionalized surface making use of the abundant amino groups of CHIT. Moreover, a significantly extended linear detection range of 8.0-512.0 μg/mL is gained under the optimized experimental conditions. In particular, the presented biosensing method shows low cost and simplicity, and only a conventional UV-vis detector is involved.     

Colloidal AgCl induced-growth of thorny gold nanoparticles and their SERS activity

In this paper, we exploited a unique procedure for obtaining thorny gold nanoparticles (Au NPs) with controllable length of thorns without using seeds and surfactants. The obtained Au NPs exhibited shape-determined surface-enhanced Raman spectroscopy activity toward rhodamine 6G.     

Adsorption of small molecules on helical gold nanorods: A relativistic density functional study

We study the adsorption of a variety of small molecules on helical gold nanorods using relativistic density functional theory. We focus on Au₄₀ which consists of a central linear strand of five gold atoms with seven helical strands of five gold atoms on a coaxial tube. All molecules preferentially adsorb at a single low‐coordinated gold atom on the coaxial tube at an end of Au₄₀. In most cases, there is significant charge transfer (CT) between Au₄₀ and the adsorbate, for CO and NO₂, there is CT from the Au₄₀ to adsorbate while for all other molecules there is CT from the adsorbate to Au₄₀. Thus, Au₄₀‐adsorbate can be described as a donor–accepter complex and we use charge decomposition analysis to better understand the adsorption process. We determine the adsorption energy order to be C₅H₅N >NO₂ > CO > NH₃ > CH₂?CH₂ > CH₂?CH? CHO > NO > HC?CH > H₂S > SO₂ > HCN > CH₃OH > H₂C?O > O₂ > H₂O > CH₄ > N₂. We find that the Au? C, Au? N, Au? S, and Au? O bonds are surprisingly strong, with clear implications for reactivity enhancement of the adsorbate. The Au? H bond is relatively weak but, for interactions via an H atom that is bonded to a carbon atom (e.g., CH₄), we find that there is large charge polarization of the Au? H? C moiety and partial activation of the inert C? H bond. Although the Au? S and Au? O bonds are generally weaker than the Au? C and Au? N bonds, we find that adsorption of H₂S or H₂O causes greater distortion of Au₄₀ in the binding region. However, the degree of distortion is small and the helical structure is retained, demonstrating the stability of the helical Au₄₀ nanorod under perturbations. © 2014 Wiley Periodicals, Inc.     

Surface-enhanced Raman scattering for perchlorate detection using cystamine-modified gold nanoparticles

Perchlorate (ClO₄⁻) has recently emerged as a widespread environmental contaminant found in groundwater and surface water, and there is a great need for rapid detection and monitoring of this contaminant. This study presents a new technique using cystamine-modified gold nanoparticles as a substrate for surface-enhanced Raman scattering (SERS) detection of perchlorate at low concentrations. A detection limit of 5 × 10⁻⁶ M (0.5 mg/L) has been achieved using this method without sample preconcentration. This result was attributed to a strong plasmon enhancement by gold metal surfaces and the electrostatic attraction of ClO₄⁻ onto positively charged, cystamine-modified gold nanoparticles at a low pH. The methodology also was found to be reproducible, quantitative, and not susceptible to significant interference from the presence of anions such as sulfate, phosphate, nitrate and chloride at concentrations <1 mM, making it potentially suitable for rapid screening and routine analysis of perchlorate in environmental samples.     

Resonance Rayleigh scattering spectral method for the determination of raloxifene using gold nanoparticle as a probe

When gold nanoparticles were being prepared by sodium citrate reduction method, citrate anions self-assembled on the surface of gold nanoparticles to form supermolecular complex anions with negative charges, and protonated raloxifene (Ralo) was positively charged and could bind with the complex anions to form larger aggregates through electrostatic force and hydrophobic effects, which could result in the remarkable enhancement of the resonance Rayleigh scattering intensity (RRS), and the appearance of new RRS spectra. At the same time, the second-order scattering (SOS) and frequency-doubling scattering (FDS) intensities were also enhanced. The maximum wavelengths were located near 370 nm for RRS, 520 nm for SOS, and 350 nm for FDS, respectively. Among them, the RRS method had the highest sensitivity and the detection limit was 5.60 ng mL⁻¹ for Ralo, and its linear range was 0.05-2.37 μg mL⁻¹. A new RRS method for the determination of trace Ralo using gold nanoparticles probe was developed. The optimum conditions of the reaction and influencing factors were investigated. In addition, the reaction mechanism and the reasons for the enhancement of RRS were discussed.     

Synthesis and ligand properties towards gold and silver of the ferrocenylamidobenzimidazole ligand

The treatment of FcCOCl (Fc = (C₅H₅)Fe(C₅H₄)) with aminobenzimidazole in 1:1 or 2:1 ratio gives the ferrocenyl-amido derivatives FcCO(benzimNH₂) or (FcCO)₂(NHbenzim), respectively. The reactivity of FcCO(benzimNH₂) with silver or gold complexes has been studied. The reaction with the basic gold compounds [Au(acac)(PPh₃)] or [O(AuPPh₃)₃]ClO₄ occurs with deprotonation of the NH₂ group and coordination of one or three gold(phosphine) fragments. The treatment of this ligand with silver compounds, such as Ag(OTf) or [Ag(OTf)(PPh₃)], gives the complexes of stoichiometry [Ag(OTf)L] or [Ag(OTf)(PPh₃)L]. The ligand FcCO(benzimNH₂) and the complex [Ag(OTf){FcCO(benzimNH₂)}(PPh₃)] have been characterized by X-ray diffraction studies. DFT calculations were performed on models of this dimeric silver complex and showed that dimerization is energetically favourable, because Ag(I) achieves a four coordination environment, despite some bonds being relatively weak.     

Polar substituent effect of the ester group on conformational equilibria of O-mono-substituted cyclohexanes—the para-substituent effect in cyclohexyl benzoates

Together with the nonsubstituted reference compound, para-methoxy- and para-nitro cyclohexyl benzoates have been synthesized and their conformational equilibria studied by low temperature NMR spectroscopy and theoretical DFT calculations. The free energy differences ΔG° between axial and equatorial conformers were examined with respect to polar substituent influences on the conformational equilibrium of O-mono-substituted cyclohexane.     

Adsorption of hydrogen on palladium nanoparticle surfaces

The behaviors of hydrogen (H) adsorbed on the palladium (Pd) nanoparticles (NPs) are examined with the modified analytic embedded‐atom method potentials and MORSE potentials. We study the effects of particle size and H coverage, and compare their adsorption properties of nanoparticle's facets with that of flat surfaces. We simulate the Pd truncated octahedron NPs with atoms from 38 to 2406 and the coverage of adsorbed H up to 1.0 monolayer (ML). Site preferences, adsorption geometries, adsorption energies, and bond lengths of H? Pd are calculated. We have also calculated the potential energy surface (PES). It is clear that the H atom binding to particle facets is quite stronger than that of flat surfaces when the particle size is smaller than 3.2 nm. We have found a significant variation that adsorption energies ascend gradually with increasing the particle size or surface coverage of H, and the adsorption energy varies about 0.6 eV for (111) facet and 0.3 eV for (100) facet as the coverage up to 1.0 ML. Our results are in reasonable agreement with the experimental values and other calculations. Copyright © 2009 John Wiley & Sons, Ltd.     

Inkjet-printed gold nanoparticle chemiresistors: Influence of film morphology and ionic strength on the detection of organics dissolved in aqueous solution

The influence of film morphology on the performance of inkjet-printed gold nanoparticle chemiresistors has been investigated. Nanoparticles deposited from a single-solvent system resulted in a “coffee ring”-like structure with most of the materials deposited at the edge. It was shown that the uniformity of the film could be improved if the nanoparticles were deposited from a mixture of solvents comprising N-methyl-2-pyrrolidone and water. Electrical conductivity measurements showed that both “coffee ring” and “flat” films were qualitatively similar suggesting that the films have similar nanoscale structures. To form the functional chemiresistor device, the 4-(dimethylamino)pyridine coating on the nanoparticle was exchanged with 1-hexanethiol to provide a hydrophobic sensing layer. The performance of 1-hexanethiol coated gold nanoparticle chemiresistors to small organic molecules, toluene, dichloromethane and ethanol dissolved in 1 M KCl in regard to changes in impedance and response times was unaffected by the film morphology. For larger hydrocarbons such as octane, the rate of uptake of the analyte into the film was significantly faster when the flatter nanoparticle film was used as opposed to the “coffee ring” film which has a thicker edge. Furthermore, the presence of potassium and chloride ions in the solution media does not significantly affect the impedance of the nanoparticle film at 1 Hz (<2% variation in film impedance over more than four orders of magnitude change in ionic strength). However, the ionic strength of the media affected the partitioning of the analyte into the hydrophobic nanoparticle film. The response of the sensor was found to increase with an increased salt concentration due to a salting-out of the analyte from the solution.     

Electrochemical DNA sensing based on gold nanoparticle amplification

A hybridization signal-amplified method based on a gold nanoparticle-supported DNA sequence for electrochemical DNA sensing has been investigated by cyclic voltammetry, differential-pulse voltammetry, and atomic-force microscopy (AFM). Quantitative analysis showed that the peak current increment (Ip) is linearly dependant on the concentration of the gold nanoparticle-supported DNA sequence Au2 over the range 0.51–8.58 pmol L^–1. AFM results indicated that the extent of surface hybridization was dependent on the concentration of the gold-nanoparticle-supported DNA sequence. Moreover, a new pair of peaks, which might arise from the special configuration of the gold-nanoparticle-supported DNA sequence, appeared in the cyclic voltammogram after hybridization. Although quite sensitive, this DNA sensing surface was not easily regenerated, so this kind of amplified method was suitable for disposable DNA sensors and chip-based gene diagnosis sensors.