Substitution of phosphine in the complex [RhCl(cyclooctadiene)(phosphine)] by 1-hexene

Summary The substitution of phosphine in the [RhCl(COD)(phosphine)] complex (1), where phosphine is PPh₃ or 1/2 BPS-2 [bis(diphenylphosphinoethyl)tetramethyldisiloxane] and COD is cycloocta-1,5-diene, by 1-hexene is a two-step reversible reaction. All individual rate constants and equilibrium constants were determined spectrophotometrically and associative mechanism occurring via the formation of five-coordinated [RhCl(COD)(phosphine)(1-hexene)] (2) was inferred. The rate-determining step changes from the first- to the second-one as the concentration of 1-hexene increases. An excess of phosphine shifts the equilibrium towards complex (2).     

Effect of oxidant on the reaction of [RhCl(cyclooctadiene)(phosphine)] with 1-hexene

Summary A promoting role of an oxidant, present in commercial 1-hexene, in the substitution of phosphine in the complex [RhCl(COD)(phosphine)] (1) where the phosphine is PPh₃ or 1/2 BPS-2 [bis(diphenylphosphinoethyl)tetra-methyldisiloxane] and COD=cycloocta-1,5-diene, has been detected and explained. When [oxidant]>[(1)] two reaction steps are distinguished: an oxidation of phosphine to phosphine oxide with generation of [RhCl(COD)], followed by its fast dimerization, and an oxidation of the dimer to Rh^III species. When [oxidant]<[(1)] the latter step is not observed and the reaction of [RhCl(COD)] with 1-hexene is favoured, particularly when an excess of phosphine (even at high oxidant concentration) is present. Most rate constants of the individual steps were evaluated.     

Effect of substituents at silicon on the oxidative addition of trisubstituted silanes to [RhCl(cod)PPh3]

Summary Trisubstituted silanes, HSiR_3–n X _n (R = Me, Et, Pr or Bu; X = Cl, OEt or Ph; and n = 0–3) readily undergo oxidative addition to complex [RhCl(cod)PPh₃] (where cod = cycloocta-1,5-diene).The quantitative correlation between rate constants, k ₁, of the reaction, followed spectrophotometrically at 20 °C in benzene solutions, and the structure of tri-substituted silanes represented by stereoelectronic parameters , and E of the substituents, was established: logk ₁ = a + b + c + dE. The reaction rate is accelerated by electron-withdrawing substituents at silicon and retarded by the bulk and pd donation of nonalkyl substituents.Author to whom all correspondence should be directed.     

Chelates formed by a constrained bis(diphenylphosphino)xylene; the crystal structures of [FeCl2(anphos)] and [RhCl(CO)(anphos-monoxide)]

The indan derived diphosphine, cis-1,3-(diphenylphosphino)indan (anphos) is synthesised by the addition of Ph₂P(BH₃)Li to cis-1,3-dibromoindan followed by deprotection with diethylamine. Anphos readily forms the bicyclic chelates [RhCl(CO)(anphos)], [PtCl₂(anphos)], [PtCl(Me)(anphos)] and [FeCl₂(anphos)]. The crystal structures of [FeCl₂(anphos)] and the monoxide complex, [RhCl(CO)(anphosO)] have been determined. Reaction of the diphosphine with [Rh(acac)(CO)₂] under moderate hydroformylation conditions catalysed the formation of 1-heptanal and branched aldehydes from 1-hexene in a ratio of 1.5:1.     

An unprecedented dinuclear alkylrhodium(III) complex built up by two 14-electron [RhCl2(alkyl)(PR3)] units

Reaction of HCl with [RhCl(C2H4)(PR3)]2 affords the dinuclear alkylrhodium(III) complex [RhCl2(C2H5)(PR3)]2, the structure of which has been determined crystallographically. PR3 is the formerly unknown trialkyl phosphine tBu2PCH2CH2C6H3-2,6-Me2, prepared in three steps from tBuPCl2. Treatment of the title compound with CO gives the mononuclear rhodium dicarbonyl cis-[RhCl(CO)2(PR3)], being the first fully characterized complex of this type.     

Catalytic polymerization of phenylacetylene with dimeric [Rh(OMe)(cod)]2 complex in ionic liquids

Dimeric rhodium(I) complex [Rh(OMe)(cod)]₂ was found to be an active catalyst of phenylacetylene polymerization to poly(phenylacetylene) (PPA) in ionic liquids containing imidazolium or pyridinium cations. The highest yield of PPA (92%) was obtained in 1‐butyl‐4‐methylpyridinium tetrafluoroborate as reaction medium. The yield of PPA in imidazolium ionic liquids containing BF₄^? or PF₆^? anions increased to 83–99% when Et₃N or cycloocta‐1,5‐diene were added as co‐catalysts. In 1‐methyl‐3‐octylimidazolium chloride (MOI · Cl) polymerization rate was much lower than in other ionic liquids, although the highest M_w (72 400) was obtained. Spectroscopic studies confirmed that [Rh(OMe)(cod)]₂ reacted with MOI · Cl forming new carbene Rh(I) complex, which can participate in the polymerization process. Copyright © 2006 John Wiley & Sons, Ltd.     

[RhCl(CO)(PPh3)]2. A precursor for the synthesis of cationic rhodium complexes with nitrogen donor ligands

Summary The use of [RhCl(CO)(PPh₃)]₂ as a precursor for the synthesis of complexes of the types [Rh(CO)L₂(PPh₃)]A (A = [ClO₄]^– or [BPh₄]^–; L = pyridine type ligand) and [Rh(CO)(L-L)(PPh₃)]A (A = [ClO₄]^– or [BPh₄]^–; L-L = bidentate nitrogen donor) and the preparation of several complexes of the types [Rh(CO)L(PPh₃){P(p-RC₆H₄)₃}]BPh₄ and [Rh(CO)(phen)(PPh₃){P(p-RC₆H₄)₃}]A (A = [ClO₄]^– or [BPh₄]^–; R = H or Me) is described.Author to whom all correspondence should be directed.     

Catalysis of hydrosilyation.: XII. Spectrophotometric study of the reactivity of the [RhCl(COD)]2-bis(dipenylphosphinoethyl)-tetramethyldisiloxane complex with substrates of the hydrosilylation reaction

The reactivity of the model complex - [RhCl(COD)]₂ - bis(diphenylphosphineethyl)etramethyldisiloxane (I) with the substrates of the hydrosilylation (1-hexene and triethoxysilane) has been studied spectrophotometrically at room temperature. Disappearance of the band at 24.4 × 10³ cm⁻¹, characteristic for the square planar complex, I, enabled us to determine pseudo first-order rate constants (k_obs) for the reaction. Relative values of k_obs indicate that the reaction is four times faster with 1-hexene than with triethoxysilane. Inhibition by added siloxyphosphine (BPS-2) is evidence for preliminary replacement of phosphine by 1-hexene. Consequently, for silica-supported catalysts of the BPS ligand structure the anchored complex is released into solution during the reaction and catalyses the process homogeneously.     

Reversible NO motion in crystalline [Fe(Porph)(1-MeIm)(NO)] derivatives

The synthesis, characterization, and X-ray structures of three low-spin (nitrosyl)iron(II) tetraarylporphyrinates, [Fe(TpXPP)(NO)(1-MeIm)], where X = F (in a triclinic and a monoclinic form) and OCH(3) are reported. All three molecules, at 100 K, have a single orientation of NO. These structures are the first examples of ordered NO's in [Fe(Porph)(NO)(1-MeIm)] complexes. The three new derivatives have similar structural features including a previously unnoted "bowing" of the N(NO)-Fe-N(Im) angle caused by a concerted tilting of the axial Fe-N(NO) and Fe-N(Im) bonds. Structural features such as the displacement of Fe out of the mean porphyrin plane toward NO, tilting of the Fe-N(NO) bond off the heme normal, and the asymmetry of the Fe-N(por) bonds further strengthen and confirm observations from earlier studies. The [Fe(TpXPP)(NO)(1-MeIm)] complexes were also studied at temperatures between 125 and 350 K to investigate temperature-dependent variations and trends in the coordination group geometry. At varying temperatures (above 150 K), all three derivatives display a second orientation of the NO ligand. The population and depopulation of this second orientation are thermally driven, with no apparent hysteresis. Crystal packing appears to be the significant feature in defining the order/disorder of the NO ligand. The length of the bond trans to NO, Fe-N(Im), was also found to be sensitive to temperature variation. The Fe-N(Im) bond length increases with increased temperature, whereas no other bonds change appreciably. The temperature-dependent Fe-N(Im) bond length change and cell volume changes are consistent with a "soft" Fe-N(Im) bond. Variable-temperature measurements show that the N-O stretching frequency changes with the Fe-N(Im) bond length. Temperature-dependent changes in the Fe-NIm bond length and N-O stretching frequency were also found to be completely reversible with no apparent hysteresis.     

Structure, reactivity and solution behaviour of [Re(ser)(7-MeG)(CO)(3)] and [Re(ser)(3-pic)(CO)(3)]: "nucleoside-mimicking" complexes based on the fac-[Re(CO)(3)](+) moiety

The fac-[Re(CO)(3)](+) moiety was reacted with the amino acid serine (D- and L-ser) and with 7-methylguanine (7-MeG), 3-methylpyridine (3-pic) or adenine (ade) to yield novel complexes intended as nucleoside-mimicking compounds. Reaction of [Re(H(2)O)(3)(CO)(3)](+)(1) with L-ser yields the complex [Re(L-ser)(2)(CO)(3)](L-2). X-Ray structure analysis of L-2 reveals that one of the two amino acids is bound to the metal centre in a bidentate fashion while the other amino acid is bound as a zwitterion via the carboxylate oxygen only. Reaction of L-2 and of [Re(D-ser)(2)(CO)(3)](D-2) with 7-MeG yields complexes [Re(L-ser)(7-MeG)(CO)(3)](L-3) and [Re(D-ser)(7-MeG)(CO)(3)](D-3) respectively. Complexes L-3 and D-3 are received as a mixture of diastereomers. If 3-pic is used instead of 7-MeG complex [Re(L-ser)(3-pic)(CO)(3)](L-4) is obtained in good yield, while interaction of L-2 with ade gives a mixture of five distinct species. Crystallization gave one single diastereomer for L-3 and D-3 and the two forms for 4 respectively. X-Ray structure analyses reveal that in all cases the amino acid is bound in a chelate fashion with the base occupying the sixth co-ordination site. When crystals of either 2 or 3 are dissolved in a CD(3)OD/D(2)O mixture (1:1, 293 K) rapid transformation to the diastereomeric mixture is observed. While for L-2 this reorganisation is fast on the NMR time scale even at 193 K, the rate constant for the rearrangement of L-3 and D-3 is 1.36 +/- 0.24 x 10(-2) s(-1) at 293 K.     

Influence of fluoride on the reversible binding of NO by [Fe(II)(EDTA)(H2O)]2-. Inhibition of autoxidation of [Fe(II)(EDTA)(H2O)]2-

The promising BioDeNO(x) process for NO removal from gaseous effluents suffers from an unsolved problem that results from the oxygen sensitivity of the Fe(II)-aminopolycarboxylate complexes used in the absorber unit to bind NO(g). The utilized [Fe(II)(EDTA)(H2O)](2-) complex is extremely oxygen sensitive and easily oxidized to give a totally inactive [Fe(III)(EDTA)(H2O)](-) species toward the binding of NO(g). We found that an in situ formed, less-oxygen-sensitive mixed-ligand complex, [Fe(II)(EDTA)(F)](3-), still reacts quantitatively with NO(g). The formation constant for the mixed ligand complex was determined spectrophotometrically. For [Fe(III)(EDTA)(F)](2-) we found log K(MLF)(F) = 1.7 +/- 0.1. The [Fe(II)(EDTA)(F)](3-) complex has a smaller value of log K(MLF)(F) = 1.3 +/- 0.2. The presence of fluoride does not affect the reversible binding of NO(g). Even over extended periods of time and fluoride concentrations of up to 1.0 M, the nitrosyl complex does not undergo any significant decomposition. The [Fe(III)(EDTA)(NO(-))](2-) complex releases bound NO on passing nitrogen through the solution to form [Fe(II)(EDTA)(H2O)](2-) almost completely. A reaction cycle is feasible in which fluoride inhibits the autoxidation of [Fe(II)(EDTA)(H2O)](2-) during the reversible binding of NO(g).     

Kinetics of initiation, propagation, and termination for the [rac-(C(2)H(4)(1-indenyl)(2))ZrMe][MeB(C(6)F(5))(3)]-catalyzed polymerization of 1-hexene.

Metallocene-catalyzed polymerization of 1-alkenes offers fine control of critical polymer attributes such as molecular weight, polydispersity, tacticity, and comonomer incorporation. Enormous effort has been expended on the synthesis and discovery of new catalysts and activators, but elementary aspects of the catalytic processes remain unclear. For example, it is unclear how the catalyst is distributed among active and dormant sites and how this distribution influences the order in monomer for the propagation rates, for which widely varying values are reported. Similarly, although empirical relationships between average molecular weights and monomer have been established for many systems, the underlying mechanisms of chain termination are unclear. Another area of intense interest concerns the role of ion-pairing in controlling the activity and termination mechanisms of metallocene-catalyzed polymerizations. Herein we report the application of quenched-flow kinetics, active site counting, polymer microstructure analysis, and molecular weight distribution analysis to the determination of fundamental rate laws for initiation, propagation, and termination for the polymerization of 1-hexene in toluene solution as catalyzed by the contact ion-pair, [rac-(C(2)H(4)(1-indenyl)(2))ZrMe][MeB(C(6)F(5))(3)] (1) over the temperature range of -10 to 50 degrees C. Highly isotactic (>99% mmmm) poly-1-hexene is produced with no apparent enchained regioerrors. Initiation and propagation processes are first order in the concentrations of 1-hexene and 1 but independent of excess borane or the addition of the contact ion-pair [PhNMe(3)][MeB(C(6)F(5))(3)]. Active site counting and the reaction kinetics provide no evidence of catalyst accumulation in dormant or inactive sites. Initiation is slower than propagation by a factor of 70. The principal termination process is the formation of unsaturates of two types: vinylidene end groups that arise from termination after a 1,2 insertion and vinylene end groups that follow 2,1 insertions. The rate law for the former termination process is independent of the 1-hexene concentration, whereas the latter is first order. Analysis of (13)C-labeled polymer provides support for a mechanism of vinylene end group formation that is not chain transfer to monomer. Deterministic modeling of the molecular weight distributions using the fundamental rate laws and kinetic constants demonstrates the robustness of the kinetic analysis. Comparisons of insertion frequencies with estimated limits on the rates of ion-pair symmetrization obtained by NMR suggest that ion-pair separation prior to insertion is not required, but the analysis requires assumptions that cannot be validated.     

金属富勒烯[Dy@C_(82)(I)]膜的电化学研究

研究并对比了金属富勒烯Dy @C82 的主要异构体Dy @C82 (I)固体膜在有机溶剂乙腈及水溶液中的电化学性质 .在乙腈溶液中 ,Dy @C82 (I)膜的电化学行为不同于其溶于有机溶剂中的电化学行为 ,前两个还原峰与其对应的再氧化峰之间存在大的分裂 .但是 ,经过还原及再氧化后的Dy @C82 (I)膜却存在一对对称性很好的氧化及再还原峰 .解释为经过还原后的Dy @C82 (I)膜的结构有利于进一步氧化 ,而不需要结构重排 ;在水溶液中 ,Dy @C82 (I)膜的电化学行为不同于其在乙腈溶液中 ,却类似于其有机溶液在Pt电极上的电化学行为 ,出现了对称性很好的三对还原峰及一对氧化峰 .在水溶液中 ,Dy @ C82 (I)的前三价负离子及一价正离子是稳定的 .利用紫外 -可见 -近红外 (UV Vis NIR)光谱及扫描电镜 (SEM)等技术对膜的性质及表面形貌等进行了表征     

Reactions of Diazo Compounds with Alkenes Catalysed by [RuCl(cod)(Cp)]: Effect of the Substituents in the Formation of Cyclopropanation or Metathesis Products

The reaction of diazo compounds with alkenes catalysed by complex [RuCl(cod)(Cp)] (cod=1,5‐cyclooctadiene, Cp=cyclopentadienyl) has been studied. The catalytic cycle involves in the first step the decomposition of the diazo derivative to afford the reactive [RuCl(Cp){?C(R¹)R²}] intermediate and a mechanism is proposed for this step based on a kinetic study of the simple coupling reaction of ethyl diazoacetate. The evolution of the Ru–carbene intermediate in the presence of alkenes depends on the nature of the substituents at both the diazo N₂?C(R¹)R² (R¹, R²=Ph, H; Ph, CO₂Me; Ph, Ph; C(R¹)R²=fluorene) and the olefin substrates R³(H)C?C(H)R⁴ (R³, R⁴=CO₂Et, CO₂Et; Ph, Ph; Ph, Me; Ph, H; Me, Br; Me, CN; Ph, CN; H, CN; CN, CN). A remarkable reactivity of the complex was recorded, especially towards unstable aryldiazo compounds and electron‐poor olefins. The results obtained indicate that either cyclopropanation or metathesis products can be formed: the first products are favoured by the presence of a cyano substituent at the double bond and the second ones by a phenyl.     

Synthesis of new polymeric rhodium carborane complexes serving as homogeneous catalysts for the hydrosilylation of 1-hexene

The coordination of Rh(PPh₃)₃Cl on a dicarbaundecaborate polyamide gives a new polymeric rhodium hydride complex with catalytic activity in the hydrosilylation of 1-hexene by triethylsilane. The rhodium derivative of 7,9-dicarbanido-undecaborate(11)-7,9-dicarboxyanilide was synthesized as a model of the monomeric unit. Co^III and Ni^IV bis(dicarbollyl) complexes also display catalytic activity in hydrosilylation reactions.Translated from Izvestiya Akademii Nauk SSSR, Seriya Khimicheskaya, No. 4, pp. 960–962, April, 1991.     

(NEt(4))(2)[Fe(CN)(2)(CO)('S(3)')]: an iron thiolate complex modeling the [Fe(CN)(2)(CO)(S-Cys)(2)] site of [NiFe] hydrogenase centers

In the search for complexes modeling the [Fe(CN)(2)(CO)(cysteinate)(2)] cores of the active centers of [NiFe] hydrogenases, the complex (NEt(4))(2)[Fe(CN)(2)(CO)('S(3)')] (4) was found ('S(3)'(2-)=bis(2-mercaptophenyl)sulfide(2-)). Starting complex for the synthesis of 4 was [Fe(CO)(2)('S(3)')](2) (1). Complex 1 formed from [Fe(CO)(3)(PhCH=CHCOMe)] and neutral 'S(3)'-H(2). Reactions of 1 with PCy(3) or DPPE (1,2-bis(diphenylphosphino)ethane) yielded diastereoselectively [Fe(CO)(2)(PCy(3))('S(3)')] (2) and [Fe(CO)(dppe)('S(3)')] (3). The diastereoselective formation of 2 and 3 is rationalized by the trans influence of the 'S(3)'(2-) thiolate and thioether S atoms which act as pi donors and pi acceptors, respectively. The trans influence of the 'S(3)'(2-) sulfur donors also rationalizes the diastereoselective formation of the C(1) symmetrical anion of 4, when 1 is treated with four equivalents of NEt(4)CN. The molecular structures of 1, 3 x 0.5 C(7)H(8), and (AsPh(4))(2)[Fe(CN)(2)(CO)('S(3)')] x acetone (4 a x C(3)H(6)O) were determined by X-ray structure analyses. Complex 4 is the first complex that models the unusual 2:1 cyano/carbonyl and dithiolate coordination of the [NiFe] hydrogenase iron site. Complex 4 can be reversibly oxidized electrochemically; chemical oxidation of 4 by [Fe(Cp)(2)PF(6)], however, led to loss of the CO ligand and yielded only products, which could not be characterized. When dissolved in solvents of increasing proton activity (from CH(3)CN to buffered H(2)O), complex 4 exhibits drastic nu(CO) blue shifts of up to 44 cm(-1), and relatively small nu(CN) red shifts of approximately 10 cm(-1). The nu(CO) frequency of 4 in H(2)O (1973 cm(-1)) is higher than that of any hydrogenase state (1952 cm(-1)). In addition, the nu(CO) frequency shift of 4 in various solvents is larger than that of [NiFe] hydrogenase in its most reduced or oxidized state. These results demonstrate that complexes modeling properly the nu(CO) frequencies of [NiFe] hydrogenase probably need a [Ni(thiolate)(2)] unit. The results also demonstrate that the nu(CO) frequency of [Fe(CN)(2)(CO)(thiolate)(2)] complexes is more significantly shifted by changing the solvent than the nu(CO) frequency of [NiFe] hydrogenases by coupled-proton and electron-transfer reactions. The "iron-wheel" complex [Fe(6)[Fe('S(3)')(2)](6)] (6) resulting as a minor by-product from the recrystallization of 2 in boiling toluene could be characterized by X-ray structure analysis.