Improved antibacterial properties of an Mg‐Zn‐Ca alloy coated with chitosan nanofibers incorporating silver sulfadiazine multiwall carbon nanotubes for bone implants

Bacteria‐caused infection remains an issue in the treatment of bone defects by means of Mg‐Zn‐Ca alloy implants. This study aimed to improve the antibacterial properties of an Mg‐Zn‐Ca alloy by coating with chitosan‐based nanofibers with incorporated silver sulfadiazine (AgSD) and multiwall carbon nanotubes (MWCNTs). AgSD and MWCNTs were prepared at a weight ratio of 1:1 and then added to chitosan at varying concentrations (ie, 0, 0.25, 0.5, and 1.5 wt.%) to form composites. The obtained composites were ejected in nanofiber form using an electrospinning technique and coated on the surface of an Mg‐Zn‐Ca alloy to improve its antibacterial properties. A microstructural examination by scanning electron microscopy (SEM) revealed the diameter of chitosan nanofiber ejected increased with the concentration of AgSD‐MWCNTs. The incorporation of AgSD‐MWCNTs into the chitosan nanofibers was confirmed by Fourier transform infrared spectroscopy (FTIR). Examination of the antibacterial activity shows that chitosan nanofibers with AgSD‐MWCNTs can significantly inhibit the growth and infiltration of Escherichia coli and Staphylococcus aureus. Biocompatibility assay and cell morphology observations demonstrate that AgSD‐MWCNTs incorporated into nanofibers are cytocompatible. Taken together, the results of this study demonstrate the potential application of electrospun chitosan with AgSD‐MWCNTs as an antibacterial coating on Mg‐Zn‐Ca alloy implants for bone treatment.     

Highly crystalline and conductive nitrogen-doped mesoporous carbon with graphitic walls and its electrochemical performance

We present a rational and simple methodology to fabricate highly conductive nitrogen-doped ordered mesoporous carbon with a graphitic wall structure by the simple adjustment of the carbonization temperature of mesoporous carbon nitride without the addition of any external nitrogen sources. By simply controlling the heat-treatment temperature, the structural order and intrinsic properties such as surface area, conductivity, and pore volume, and the nitrogen content of ordered graphitic mesoporous carbon can be controlled. Among the materials studied, the sample heat-treated at 1000 °C shows the highest conductivity, which is 32 times higher than that for the samples treated at 800 °C and retains the well-ordered mesoporous structure of the parent mesoporous carbon nitride and a reasonable amount of nitrogen in the graphitic framework. Since these materials exhibit high conductivity with the nitrogen atoms in the graphitic framework, we further demonstrate their use as a support for nanoparticle fabrication without the addition of any external stabilizing or size-controlling agent, as well as the anode electrode catalysts. Highly dispersed platinum nanoparticles with a size similar to that of the pore diameter of the support can be fabricated since the nitrogen atoms and the well-ordered porous structure in the mesoporous graphitic carbon framework act as a stabilizing and size-controlling agent, respectively. Furthermore the Pt-loaded, nitrogen-doped mesoporous graphitic carbon sample with a high conductivity shows much higher anodic electrocatalytic activity than the other materials used in the study.     

Biocompatible and biodegradable polymer nanofibers displaying superparamagnetic properties.

Superparamagnetic polymer nanofibers intended for drug delivery and therapy are considered here. Magnetite (Fe3O4) nanoparticles in the diameter range of 5-10 nm were synthesized in aqueous solution. Polymer nanofibers containing magnetite nanoparticles were prepared from commercially available poly(hydroxyethyl methacrylate), PHEMA, and poly-L-lactide (PLLA) by the electrospinning technique. Nanofibers with diameters ranging from 50 to 300 nm were obtained. Nanofibers containing up to 35 wt % magnetite nanoparticles displayed superparamagnetism at room temperature. The blocking temperature was about 50 K for an applied field of 500 Oe, and the saturation magnetization was 3.5 emu g(-1) and 1.1 emu g(-1) for Fe3O4/PHEMA and Fe3O4/PLLA nanofibers, respectively, and depended on the amount of Fe3O4 nanoparticles in the nanocomposites. To test such magnetic nano-objects for applications as drug carriers and drug-release systems we incorporated a fluorescent albumin with dog fluorescein isothiocyanate (ADFI).     

Electrospun magnetic polybutylene terephthalate nanofibers for thin film microextraction

A thin film microextraction method using elecrospun magnetic polybutylene terephthalate nanofibers is developed and implemented to isolate some selected triazines. Due to the high mechanical stability of these nanofibers, they are repeatedly used under harsh magnetic stirring and ultrasonic conditions without any damage and structure degradation. The presence of magnetic nanoparticles within the nanofiber structure increases the extraction efficiency while the fibers could be collected by an external magnet. The synthesized nanocomposite showed strong affinity toward the selected analytes. Apart from the concentration of magnetic nanoparticles within the nanocomposite network, the effect of different parameters on the extraction and desorption processes including the sample pH, extraction time, sample volume, type of desorption solvent, solvent volume, and desorption time were optimized. Eventually, the detection limits were in the range of 0.02–0.05 ng/mL, while the limits of quantification were between 0.1 and 0.2 ng/mL. The linear dynamic range was 0.1–100 ng/mL, and the relative standard deviations were 4–9% (n =  3). The developed method was extended to the real water samples, and the relative recoveries were in the range of 86–103%, indicating that the prepared sorbent is suitable for extraction of triazines from environmental samples.     

Preparation,characterization, and properties of nanofibers based on poly(vinylidene fluoride) and polyhedral oligomeric silsesquioxane

Nanostructered nanofibers based on poly(vinylidene fluoride) (PVDF) and polyhedral oligomeric silsesquioxane (POSS) have been prepared by electrospinning process. The starting solutions were prepared by dissolving both the system components in the mixture N,N‐dimethylacetamide/acetone. The characteristics of the fiber prepared, studied by scanning electron microscopy, atomic force microscopy, and wide angle X‐ray diffraction, have been compared with those of PVDF fibers. Morphological characterization has demonstrated the possibility to obtain defect‐free PVDF/POSS nanofibers by properly choosing the electrospinning conditions, such as voltage, polymer concentration, humidity, etc. Conversely, in the case of fibers based on the neat polymer, it was not possible to attain the complete elimination of beads in the electrospun nanofibers. The different behavior of the two types of solutions has been ascribed to silsesquioxane molecules, which, without influencing the solution viscosity or conductivity, favor the formation of uniform structures by decreasing the system surface tension. Concerning POSS distribution in the fibers, the morphological characterization of the electrospun films has shown a submicrometric dispersion of the silsesquioxane. It is relevant to underline that cast films, prepared by the same solutions, have been found to be characterized by POSS aggregation, thus demonstrating a scarce affinity between the two‐system components. Indeed, the peculiar solvent evaporation of the electrospun solution, which is much faster than that occurring during the cast process, prevents POSS aggregation, thus leading to the formation of nanofibers characterized by a silsesquioxane dispersion similar to that present in solution. Finally, the presence of POSS improves the electrospun film mechanical properties. Copyright © 2011 John Wiley & Sons, Ltd.     

Synthesis and properties of thermoresponsive magnetic polymer composites and their electrospun nanofibers

The thermoresponsive magnetic polymer composites and nanofibers were fabricated. Their thermal and magnetic properties were also investigated. Fe₃O₄ nanoparticles were prepared by coprecipitation method. Further condensation reaction was used to fabricate the double‐layer lauric acid modified Fe₃O₄ (DLF) nanoparticles dispersed well in water. Thermal properties of poly(N‐isopropylacrylamide) (PNIPAAm) and DLF/PNIPAAm composites and their aqueous solutions were measured by TGA and DSC. With the increasing of DLF content, the interaction between DLF and PNIPAAm caused the lower critical solution temperature (LCST) of polymer solution to shift from 33 to 31.25 °C. The effects of concentration and pH on LCST were also studied. The DLF/PNIPAAm nanofibers were fabricated by electrospinning. Their diameters were around 100–250 nm. Magnetization curves of DLF/PNIPAAm composite and nanofibers were overlapped and the saturated magnetizations were the same. Magnetic attraction behaviors of DLF/PNIPAAm polymer solution at temperatures below and above LCST were different. Aggregation of DLF/PNIPAAm above LCST enhanced magnetic moment density as well as magnetic attraction ability. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 848–856     

Lignin bio-oil-based electrospun nanofibers with high substitution ratio property for potential carbon nanofibers applications

We reported a new approach for development of lignin bio-oil-based electrospun nanofibers (LENFs) that had high substitution ratio (up to 80 wt%) and good morphology. This approach was particularly unique and translatable as it used small molecule lignin bio-oil with high reactivity and low heterogeneity obtained via lignin depolymerization reaction to produce well-oriented LENFs. Firstly, effects of various blends solutions ratios and electrospinning parameters on the characteristics of the obtained LENFs were analyzed. The results showed that the optimal parameters that resulted in the best electrospun nanofibers were as follows: blend solution ratio, the 20 wt% blend solution containing 80 wt% straw lignin bio-oil (SLB) and 20 wt% polyacrylonitrile (PAN), flow rate, 1 mL/h, voltage, 20 kV, rotational speed, 500 r/min and the distance between needle and collection screen, 20 cm. Secondly, used the best LENFs, we also applied to prepare lignin bio-oil-based carbon nanofibers (LCNFs) and estimated its properties by scanning electron microscope (SEM), X-ray diffraction (XRD) patterns, Raman spectroscopy and tension testing. Our results demonstrated that compared with pure PAN carbon nanofibers (PCNFs), the as-prepared LCNFs had similar smooth surfaces, similar crystallinity and similar mechanical properties. This work can promote the utilization of lignin depolymerization main-products to produce lignin-based materials, while also help to reduce use of high-cost PAN.     

The preparation and adsorption properties of electrospun aramid nanofibers

The focus of this work is the preparation of aramid nanofibers via electrospinning technology and the study of their adsorption properties. In this article, aramid nanofibers were prepared by electrospinning aramid fibers solution with the addition of lithium chloride (LiCl). It showed a good adsorption capacity when methylene blue (MB) was used as the model target. There were much larger adsorption amounts and faster kinetics of uptaking target species of electrospun aramid nanofibers to MB than that of electrospun polyethersulfone (PES) nanofibers. Compared with activated carbon, aramid nanofibers also have a much faster adsorption rate to MB. Aramid nanofibers were subsequently used to effectively remove endocrine disruptors such as bisphenol A (BPA), phenol (Phe), and p‐hydroquinone (BPhe) from their aqueous solutions. Additionally, molecule imprinted technology enhances aramid nanofibers with much higher adsorption amounts and special adsorption property for endocrine disruptors. These results showed that aramid nanofibers have the potential to be used in environmental applications. © 2012 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2012     

Designing magnetic and superhydrophobic cellulose nanofibers based-aerogel for efficient oil water separation

In this work, we used cellulose nanofibers (CNF) as the skeleton, Fe₃O₄@ZnO composite particles as magnetic synergist particles, 3-(2-aminoethylamino) propyltrimethoxysilane (AS) and trimethoxy(octyl)silane (OTMS) as water-based hydrophobic modifiers to prepare magnetic and superhydrophobic cellulose nanofibers based-aerogel with low density and intricate three-dimensional structure. Fe₃O₄@ZnO confers magnetic properties (3.82 emu/g) and exceptional thermal stability (water contact angle of 150.1° at 200 °C) to the system, while the combination with OTMS/AS endows the system superhydrophobic (157.5°) and excellent mechanical properties (stress of 96.95 kPa at 80% strain). It is worth noting that in the process of modifying the system with OTMS/AS, no organic solvents and acidic substances are used in the solution. Benefiting from their synergies, the system demonstrates a notable oil absorption capacity (12.31–41.91 g/g) and outstanding oil selectivity (exceeding 90%), driven by gravity alone. Interestingly, this system, marked by its cost-effectiveness, simplicity, eco-friendliness, and heightened efficiency, holds promising prospects for diverse applications in different oil–water separation behavior and purifying industrial oil wastewater, as well as oil flooding incidents.     

氧化钴和氮掺杂碳纳米管纳米复合物的催化与容量性质(英文)

The nanocomposites based on cobalt oxide and nitrogen-doped carbon nanofibers (N-CNFs) with cobalt oxide contents of 10–90 wt% were examined as catalysts in the CO oxidation and supercapacity electrodes. Depending on Со3О4 content, such nanocomposites have different morphologies of cobalt oxide nanoparticles, distributions over the bulk, and ratios of Со3+/Co2+ cations. The 90%Со3О4-N-CNFs nanocomposite showed the best activity because of the increased concentration of defects in N-CNFs. The capacitance of electrodes containing 10%Со3О4-N-CNFs was 95 F/g, which is 1.7 times higher than electrodes made from N-CNFs.     

Facile preparation of highly conductive,flexible, and strong carbon nanotube/polyaniline composite films

In general, the high electrical conductivity (EC) comes into conflict with the good flexibility and high strength of carbon nanotube (CNT)/polyaniline (PANI) composites. In other words, a high CNT content will bring about a high EC but lead to a low flexibility and strength due to the CNT‐constrained matrix deformation and CNT aggregation. In this work, a highly conductive, flexible and strong CNT/PANI composite film prepared via a facile solvent‐evaporation method is readily obtained by a cold stretching. The cold stretching is conducted at room temperature for the CNT/PANI film. It is observed that the cold stretching process leads to an unexpectedly enhanced EC. The as‐obtained EC of 231 S/cm is much higher than that (2 – 50 S/cm) of the previously reported CNT/PANI composite films. Meanwhile, the strength is obviously improved over that of the pure PANI film and the good flexibility is maintained to a high degree by the introduction of a proper CNT content. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 1575–1585     

Functionalized carbon nanotube/polyacrylonitrile composite nanofibers: fabrication and properties

The functionalized multi‐walled carbon nanotubes (f‐MWCNTs) were obtained by Friedel–Crafts acylation, which introduced aromatic amine groups onto the sidewall. And the grafted yield was adjusted by controlling the concentration of the catalyst. The composite solutions containing f‐MWCNTs and polyacrylonitrile (PAN) were then prepared by in‐situ or ex‐situ solution polymerization. The resulting solutions were electrospun into composite nanofibers. In the in‐situ polymerization, morphological observation revealed that f‐MWCNTs was uniformly dispersed along the axes of the nanofibers and increased interfacial adhesion between f‐MWCNTs and PAN. Furthermore, two kinds of f‐MWCNTs/PAN composite nanofibers had a higher degree of crystallization and a larger crystal size than PAN nanofibers had, so the specific tensile strengths and modulus of the composite nanofibers were enhanced. And the thermal stability of f‐MWCNTs/PAN from in‐situ method was higher than that of ex‐situ system. When the f‐MWCNTs content was less than 1 wt%, the specific tensile strengths and modulus of nanofibers were enhanced with increase in the amounts of f‐MWCNTs, and f‐MWCNTs/PAN of in‐situ system provided better mechanical properties than that of ex‐situ system. Copyright © 2010 John Wiley & Sons, Ltd.     

Electrospun fibers from poly(methyl methacrylate)/vapor grown carbon nanofibers

Electrospinning has been used to obtain poly(methyl methacrylate) (PMMA) microfibers and nanofibers and PMMA/vapor grown carbon nanofibers (VGCNFs or CNFs) composite fibers with micrometer and nanometer size diameters. Thermogravimetric analysis (TGA) indicated that addition of CNFs caused a decrease in the thermal stability of the composite fibers. Scanning electron microscopy (SEM) was used to confirm the micro‐ and nano‐ nature of the fibers and transmission electron microscopy (TEM) was utilized to confirm the presence of CNFs embedded within the polymer matrix and along the surface. Copyright © 2006 John Wiley & Sons, Ltd.     

Thermal and mechanical properties of electrospun PMMA,PVC, Nylon 6, and Nylon 6,6

Poly(methyl methacrylate) (PMMA), poly(vinyl chloride) (PVC), Nylon 6, and Nylon 6,6 have been electrospun successfully. The nanofibers have been characterized by scanning electron microscopy (SEM), confirming the presence of bead free and fiber‐bead free morphologies. Thermogravimetric analysis (TGA) indicated differences between the thermal stability of PMMA nanofibers and PMMA powder. However, no significant differences were observed between the starting physical form (powder or pellet) of PVC, Nylon 6 and Nylon 6,6, and their corresponding electrospun nanofibers. Differential scanning calorimetry (DSC) demonstrated a lower glass transition temperature (T_g) and water absorption for PMMA electrospun nanofibers. Furthermore, electrospun Nylon 6 and Nylon 6,6 had a slight decrease in crystallinity. Tensile testing was performed on the electrospun nanofibers to obtain the Young modulus, peak stress, strain at break, and energy to break, revealing that the non‐woven mats obtained had modest mechanical properties that need to be enhanced. Copyright © 2007 John Wiley & Sons, Ltd.     

Effect of carbon nanofibers on mechanical and electrical behaviors of acrylonitrile‐butadiene rubber composites

Recently, carbon nanofibers have become an innovative reinforcing filler that has drawn increased attention from researchers. In this work, the reinforcement of acrylonitrile butadiene rubber (NBR) with carbon nanofibers (CNFs) was studied to determine the potential of carbon nanofibers as reinforcing filler in rubber technology. Furthermore, the performance of NBR compounds filled with carbon nanofibers was compared with the composites containing carbon black characterized by spherical particle type. Filler dispersion in elastomer matrix plays an essential role in polymer reinforcement, so we also analyzed the influence of dispersing agents on the performance of NBR composites. We applied several types of dispersing agents: anionic, cationic, nonionic, and ionic liquids. The fillers were characterized by dibutylphtalate absorption analysis, aggregate size, and rheological properties of filler suspensions. The vulcanization kinetics of rubber compounds, crosslink density, mechanical properties, hysteresis, and conductive properties of vulcanizates were also investigated. Moreover, scanning electron microscopy images were used to determine the filler dispersion in the elastomer matrix. The incorporation of the carbon nanofibers has a superior influence on the tensile strength of NBR compared with the samples containing carbon black. It was observed that addition of studied dispersing agents affected the performance of NBR/CNF and NBR/carbon black materials. Especially, the application of nonylphenyl poly(ethylene glycol) ether and 1‐butyl‐3‐methylimidazolium tetrafluoroborate contributed to enhanced mechanical properties and electrical conductivity of NBR/CNF composites.     

Electrospinning preparation and mechanical properties of PVA/HNTs composite nanofibers

In this paper, the PVA/HNTs composite nanofibers with well‐enhanced mechanical properties were successfully prepared by electrospinning technique. The structure and properties of the composite nanofibers were characterized by TEM, XRD, FT‐IR, and DSC. The results indicated that the highly oriented and dispersed HNTs wrapped in polymer matrix were achieved by inducing function during electrospinning processing. The mechanical properties of the PVA/HNTs composite nanofibers depended on HNTs content were investigated, which showed 72.4% increase in tensile strength at optimal filling content. Copyright © 2016 John Wiley & Sons, Ltd.     

Surfactant-directed polypyrrole/CNT nanocables: synthesis, characterization, and enhanced electrical properties.

We describe here a new approach to the synthesis of size-controllable polypyrrole/carbon nanotube (CNT) nanocables by in situ chemical oxidative polymerization directed by the cationic surfactant cetyltrimethylammonium bromide (CTAB) or the nonionic surfactant polyethylene glycol mono-p-nonylphenyl ether (Opi-10). When carbon nanotubes are dispersed in a solution containing a certain concentration of CTAB or Opi-10, the surfactant molecules are adsorbed and arranged regularly on the CNT surfaces. On addition of pyrrole, some of the monomer is adsorbed at the surface of CNTs and/or wedged between the arranged CTAB or Opi-10 molecules. When ammonium persulfate (APS) is added, pyrrole is polymerized in situ at the surfaces of the CNTs (core layer) and ultimately forms the outer shell of the nanocables. Such polypyrrole/CNT nanocables show enhanced electrical properties; a negative temperature coefficient of resistance at 77-300 K and a negative magnetoresistance at 10-200 K were observed.     

Study of the thermal properties of polyester composites loaded with oriented carbon nanofibers using the front-face flash method

In this work, we have prepared polyester resin based composites, loaded with carbon nanofibers decorated with magnetite nanoparticles (m-CNF) in several volumetric concentrations covering from 0 to 3.25% and oriented applying a constant magnetic field before polymerization. A study of the heat transfer along the direction of the alignment of the fibers was performed by measuring the in-depth thermal diffusivity and thermal effusivity using the laser flash method in the front-face configuration. For the maximum volumetric concentration of aligned nanofibers along the thickness of the sample, an improvement of 80% of the thermal conductivity above the thermal conductivity of the polyester resin was observed. In contrast, the increment of the thermal conductivity was only of 20% above the value of the matrix for samples with non-oriented carbon nanofibers. The effects of the m-CNF and their orientation on the effective thermal conductivity of the composites were analyzed using a simple theoretical model, which takes into account the thermal mismatch between the matrix and the fillers, as well as the aspect ratio of the embedded fibers.