Resonance frequencies of meniscus waves as a physical mechanism for a DNA biosensor

This paper presents a liquid surface biosensor whose potential applications are analogue to the well-known quartz crystal microbalance. The technique involved is based on the resonance of meniscus capillary waves here excited at a functionalized air-water interface. The strategy proposed in this paper can be seen as a promising way to avoid as much as possible any transfer of Blodgett type. Meniscus capillary waves supplied by the electrodynamical vibration of a brimful cylinder filled with water are used as a way to characterize the surface aging of an air-water interface covered by a lipidic monolayer. An optical technique based on one-dimensional interferometry is developed to measure continuously the resonant behavior of the surface elevation at the center of the cell around the natural frequencies of the meniscus waves. The frequency dependence of the wave amplitude is investigated during the transient regime associated to the immobilization of DNA strands at the lipidic matrix. Resonant frequencies are found to be very sensitive to the chemical loading supported by the air-water interface. The technique is seen as a mean to discriminate between single- and double-stranded DNA.     

Metal speciation dynamics in monodisperse soft colloidal ligand suspensions

A comprehensive theory is presented for the dynamics of metal speciation in monodisperse suspensions of soft spherical particles characterized by a hard core and an ion-permeable shell layer where ligands L are localized. The heterogeneity in the binding site distribution leads to complex formation/dissociation rate constants (denoted as k a (*) and k d (*), respectively) that may substantially differ from their homogeneous solution counterparts (k a and k d). The peculiarities of metal speciation dynamics in soft colloidal ligand dispersions result from the coupling between diffusive transport of free-metal ions M within and around the soft surface layer and the kinetics of ML complex formation/dissociation within the shell component of the particle. The relationship between k a,d (*) and k a,d is derived from the numerical evaluation of the spatial, time-dependent distributions of free and bound metal. For that purpose, the corresponding diffusion equations corrected by the appropriate chemical source term are solved in spherical geometry using a Kuwabara-cell-type representation where the intercellular distance is determined by the volume fraction of soft particles. The numerical study is supported by analytical approaches valid in the short time domain. For dilute dispersions of soft ligand particles, it is shown that the balance between free-metal diffusion within and outside of the shell and the kinetic conversion of M into ML within the particular soft surface layer rapidly establishes a quasi-steady-state regime. For sufficiently long time, chemical equilibrium between the free and bound metal is reached within the reactive particle layer, which corresponds to the true steady-state regime for the system investigated. The analysis reported covers the limiting cases of rigid particles where binding sites are located at the very surface of the particle core (e.g., functionalized latex colloids) and polymeric particles that are devoid of a hard core (e.g., polysaccharide macromolecules, gel particles). For both the transient and quasi-steady-state regimes, the dependence of k a,d (*) on the thickness of the soft surface layer, the radius of the hard core of the particle, and the kinetic rate constants k a,d for homogeneous ligand solutions is thoroughly discussed within the context of dynamic features for colloidal complex systems.     

Methanol Oxidation at Platinum in Alkaline Media: A Study of the Effects of Hydroxide Concentration and of Mass Transport

The hydroxide ion concentration dependence of the methanol oxidation reaction at Pt was studied using microelectrode voltammetry and rotating disk electrode voltammetry. Both methods suggest that the rate of methanol oxidation is limited by hydroxide mass transport at low hydroxide concentrations, while it is inhibited by hydroxide adsorption at high concentrations. It was possible to shift from the transport-limited regime to the inhibitory regime by varying the bulk concentration of hydroxide or by varying mass transport to the electrode. Rotating ring-disk electrode voltammetry was employed to qualitatively assess changes in the diffusion layer pH. The results indicated a decrease in the surface pH during methanol oxidation, as expected, but also that the pH reached a steady state during hydroxide transport limited methanol oxidation.     

Adsorption on Heterogeneous Regular Surfaces

Quantifying the role of surface shape and physicochemical surface conditions on the interfacial reactivity of particles and substrates is fundamental to a multitude of natural and engineered surface adsorption phenomena. We consider continuum/jump regime adsorption at the gas or liquid interface of arbitrary regular solid surfaces with heterogeneous surface features. In particular, the 3-D boundary value problem (based on Laplace's diffusion equation) is converted into a 2-D integral equation for the adsorbate concentration at the particle surface. This accommodates numerical descretization via the implementation of 2-D Gauss-Legendre quadratures on an arrangement of high- and low-adsorption patch trace sites constructed to completely cover the particle surface. A generalized computer program is developed to solve the resulting linear algebra problem for the unkown local adsorption current densities. We investigate the role of various distributions of high- and low-adsorption sites for a generalized class of spheres which includes the DNA-like shaped twisted spheres. The biological implications of the role of surface curvature on interfacial adsorption/reactivity at particle surfaces are also discussed. Copyright 2001 Academic Press.     

Differential permeation — Part I: A method for the study of solvent diffusion through membranes

We describe the differential permeation method for the study of the diffusion of solvents from a liquid (or liquid mixture) through flat or tubular membranes. This method consists of measuring the transient permeation rates through the membrane when one of its faces is suddenly put into contact with the liquid medium. The change in the transient rate with time is analyzed by numerical best fitting methods to determine the Fickian diffusion coefficient. A simplified equation is proposed for the fitting of the response of a tubular membrane. Deviations from the Fickian transport mechanism with concentration-independent diffusion coefficient can be evidenced and eventually analyzed by using other mechanistic models.     

Steady Marangoni flow traveling with chemical fronts

When autocatalytic chemical fronts propagate in thin layers of solution in contact with air, they can induce capillary flows due to surface tension gradients across the front (Marangoni flows). We investigate here such an interplay between autocatalytic reactions, diffusion, and Marangoni effects with a theoretical model coupling the incompressible Navier-Stokes equations to a conservation equation for the autocatalytic product concentration in the absence of gravity and for isothermal conditions. The boundary condition at the open liquid/air interface takes the surface activity of this product into account and introduces the solutal Marangoni number M representing the intensity of the coupling between hydrodynamics and reaction-diffusion processes. Positive and negative Marangoni numbers correspond, respectively, to the cases where the product decreases or increases surface tension behind the front. We show that, in both cases, such coupled systems reach an asymptotic dynamics characterized by a steady fluid vortex traveling at a constant speed with the front and deforming it, with, however, an asymmetry between the results for positive and negative M. A parametric study shows that increased propagation speed, front deformation, and possible transient oscillating dynamics occur when the absolute value of M is increased.     

Coupled transport membranes II: : The mechanism of uranium transport with a tertiary amine

This paper describes the parameters controlling the coupled transport of uranium anions through liquid membranes. The membranes consist of a microporous polymeric support with a liquid, tertiary amine complexing agent held within the pores by capillary forces. When this liquid membrane is interposed between two aqueous solutions of unequal ion concentrations, the complexing agent can pick up the anion on one side of the membrane and carry it across the membrane by diffusion in the form of a neutral complex. Ions of opposite charge may be carried in the same direction, or ions of like charge may be carried in the opposite direction. We refer to these two modes of transport as “co-transport” and “counter-transport”, respectively. In the coupled transport of uranium, both co-transport and counter-transport can occur. p]The coupling of the flows of two ions permits one of the ions to be pumped against its concentration gradient. We have demonstrated “uphill diffusion” of uranium against substantial concentration gradients, and at significant rates. A number of factors affect uranium flux, principally the concentrations of uranium and the coupled ion in the aqueous solutions. The base strength of the tertiary amine is also an important parameter.     

Dynamics of amphiphilic diblock copolymers at the air-water interface

Two polyisoprene-polyethyleneoxide diblock copolymers with different block length ratios adsorbed to the water surface were investigated by multiple angle of incidence ellipsometry, evanescent wave light scattering, and surface tension experiments. In a semidilute interfacial regime, the transition from a two-dimensional to a "mushroom" regime, in which polymer chains form loops and tails in the subphase, was discussed. A diffusion mechanism parallel to the interface was probed by evanescent wave dynamic light scattering. At intermediate concentrations, the interfacial diffusion coefficient D(∥) scales with the surface concentration Γ, as D(∥) ~ Γ(0.77) in agreement with the scaling observed for polymer solutions in a semidilute regime. At relatively high concentrations a decreasing of D(∥) is discussed in terms of increasing friction due to interactions between polyisoprene chains.     

Control of Surface Barriers in Mass Transfer to Modulate Methanol-to-Olefins Reaction over SAPO-34 Zeolites

Mass transfer of guest molecules has a significant impact on the applications of nanoporous crystalline materials and particularly shape-selective catalysis over zeolites. Control of mass transfer to alter reaction over zeolites, however, remains an open challenge. Recent studies show that, in addition to intracrystalline diffusion, surface barriers represent another transport mechanism that may dominate the overall mass transport rate in zeolites. We demonstrate that the methanol-to-olefins (MTO) reaction can be modulated by regulating surface permeability in SAPO-34 zeolites with improved chemical liquid deposition and acid etching. Our results explicitly show that the reduction of surface barriers can prolong catalyst lifetime and promote light olefins selectivity, which opens a potential avenue for improving reaction performance by controlling the mass transport of guest molecules in zeolite catalysis.     

Dynamic properties of poly(styrene)-poly(ethylene oxide) diblock copolymer films at the air-water interface

The complex dynamic elasticity of monolayers of the diblock copolymer poly(styrene)-poly(ethylene oxide) at the air-water interface in the pancake, quasi-brush, and brush regimes has been studied by means of three experimental techniques--the surface transverse and longitudinal waves and the oscillating barrier method. In the pancake regime the surface viscoelastic properties in the frequency range under investigation (0.01-520 Hz) prove to be indistinguishable from the surface properties of the homopolymer PEO. Transition to the quasi-brush regime is accompanied by rather abrupt changes in both components of the surface viscoelasticity. The surface viscosity in the brush regime exceeds significantly the results calculated from the theory of D. M. A. Buzza et al. (J. Chem. Phys.109, 5008 (1998)), which takes into account the dissipation arising from the flow of solvent through the brush phase. Possible reasons of this discrepancy are discussed.     

Particle adsorption and deposition: role of electrostatic interactions

This work demonstrates how electrostatic interactions, described in terms of the classical DLVO theory, influence colloid particle deposition phenomena at solid/liquid interfaces. Electrostatic interactions governing particle adsorption in both non-polar and polar media (screened interactions) are discussed. Exact and approximate methods for calculating the interaction energy of spherical and non-spherical (anisotropic) particles are presented, including the Derjaguin method. Phenomenological transport equations governing particle deposition under the linear regime are discussed with the limiting analytical expressions for calculating initial flux. Non-linear adsorption regimes appearing for higher coverage of adsorbed particles are analysed. Various theoretical approaches are exposed, aimed at calculating blocking effects appearing due to the presence of adsorbed particles. The significant role of coupling between bulk transport and surface blocking is demonstrated. Experimental data obtained under well-defined transport conditions, such as diffusion and forced convection (impinging-jet cells), are reviewed. Various experimental techniques for detecting particles at interfaces are discussed, such as reflectometry, ellipsometry, streaming potential, atomic force microscopy, electron and optical microscopy, etc. The influence of ionic strength and flow rate on the initial particle deposition rate (limiting flux) is presented. The essential role of electrostatic interactions in particle deposition on heterogeneous surfaces is demonstrated. Experimental data pertinent to the high-coverage adsorption regime are also presented, especially the dependence of the maximum coverage of particles and proteins on the ionic strength. The influence of lateral electrostatic interactions on the structure of particle monolayers is elucidated, and the links between colloid and molecular systems are pointed out.     

起泡剂C12E8的表面流变学性质

利用表面波技术研究起泡剂C_(12)E_8的表面流变学性质以及解释表面变形所产生的表面张力梯度的修复机理．实验结果表明，起泡剂C_(12)E_8的表面具有粘弹性质，其减胀模量与表面变形频率有关系．在低浓度时，随着溶液浓度的增加，表面吸附量的增加很高了膨胀模量．而在高浓度时，由于表面与溶液之间的扩散交换抵消了膨胀模量的增加，这导致膨胀模量随着溶液浓度增加反而降低．     

Modification of active and porous sublayers of aged polyamide/polysulfone composite membranes due to HNO3 treatment: effect of treatment time

Changes in electrical and transport parameters for aged composite polyamide/polysulfone membrane samples (PAC) and their porous support layers (PSU) as a result of chemical treatment (immersion in 1 M HNO3 solution) at four different times (12 h < or = t < or = 72 h) have been obtained. Salt permeability, ion transport number, and membrane electrical resistance for the treated samples were determined from salt diffusion, membrane potential, and impedance spectroscopy measurements, which were carried out with the membranes in contact with NaCl solutions at different concentrations and compared with those determined for fresh and aged nontreated samples. Results show the strong effect of aging on membrane parameters, particularly the decrease in salt permeability (P(s)) and the increase in membrane electrical resistance (R(m)), while ion transport number is hardly affected by aging, chemical treatment, or treatment time. Results show how the compaction of the porous structure causes by aging (dried membrane matrix structure) can be partially reduced by HNO3 treatment, and they also allow the estimation of 24-h treatment as the optimum time (higher salt permeability and lower membrane electrical resistance), mainly for the polysulfone support layer. The use of equivalent circuits in the analysis of impedance spectroscopy data allows separate estimation of the electrical resistance associated with each sublayer of the composite PAC membrane samples. On the other hand, chemical changes in the active top layer of the PAC membrane (polyamide active layer) were obtained from XPS analysis, which show some modifications in the atomic concentration percentages of the polyamide characteristic elements as a result of acidic treatment time, which are more significant after 72-h acidic immersion.     

Characteristics of high efficiency dye-sensitized solar cells

Impedance spectroscopy was applied to investigate the characteristics of dye-sensitized nanostructured TiO2 solar cells (DSC) with high efficiencies of light to electricity conversion of 11.1% and 10.2%. The different parameters, that is, chemical capacitance, steady-state transport resistance, transient diffusion coefficient, and charge-transfer (recombination) resistance, have been interpreted in a unified and consistent framework, in which an exponential distribution of the localized states in the TiO2 band gap plays a central role. The temperature variation of the chemical diffusion coefficient dependence on the Fermi-level position has been observed consistently with the standard multiple trapping model of electron transport in disordered semiconductors. A Tafel dependence of the recombination resistance dependence on bias potential has been rationalized in terms of the charge transfer from a distribution of surface states using the Marcus model of electron transfer. The current-potential curve of the solar cells has been independently constructed from the impedance parameters, allowing a separate analysis of the contribution of different resistive processes to the overall conversion efficiency.     

Carrier-facilitated liquid membrane extraction of penicillin G from aqueous streams

Kinetics and mechanism for the carrier-facilitated transport of penicillin G from aqueous solutions through a supported liquid membrane containing Amberlite LA-2 were investigated. The strip phase was either phosphate buffer or sodium carbonate solution. Experiments were performed as a function of the pH, the concentrations of penicillin G in the feed phase and of amine in the membrane phase. A transport model was proposed considering aqueous film diffusion, interfacial chemical reaction, and membrane diffusion. The calculated rates were found to agree with the measured ones (average standard error, 12%). Under the conditions investigated (feed pH 5.02–7.83, penicillin G concentration 10–500 mol/m³, amine concentration 50–1000 mol/m³), the present transport process was shown to be governed by combined interfacial chemical reaction and membrane diffusion.     

Application of Liquid Crystalline NMR Solvents to a Mixture of Ketones

A series of dilute liquid crystalline solvents are used to study the effect of slight anisotropy caused by partial alignment on chemical shift and residual dipolar coupling (RDC) in small molecules. The residual dipolar couplings between protons in solutes are found to be almost independent of the local environment. It is also found that the chemical shift does not change over the concentration range observed. A linear relationship between residual dipolar coupling and liquid crystal concentration is observed at relatively low concentrations, but is severely violated at high concentrations.     

Electrical properties and defect chemistry of TiO2 single crystal. IV. Prolonged oxidation kinetics and chemical diffusion

Measurements of both electrical conductivity and thermoelectric power were used to monitor the equilibration kinetics of undoped single-crystal TiO(2) during prolonged oxidation at 1123 and 1323 K and p(O(2)) = 75 kPa. Two kinetics regimes were revealed: kinetics regime I (rapid kinetics), which is rate-controlled by the transport of oxygen vacancies, and kinetics regime II (slow kinetics), which is rate-controlled by the transport of titanium vacancies. The incorporation of titanium vacancies allows undoped p-type TiO(2) to be processed in a controlled manner. The kinetics data were used to determine the chemical diffusion coefficient (D(chem)) associated with the transport of titanium vacancies, which is equal to D(chem) = 8.9 x 10(-14) m(2) s(-1) and D(chem) = 9.3 x 10(-15) m(2) s(-1) at 1323 and 1123 K, respectively.     

Hydrophilization of porous polyethylene films by cold plasma of different types

Porous PE films have been modified using high-frequency discharge plasma (in air) and dielectric surface barrier discharge plasma in static (in oxygen and nitrogen) and dynamic (in argon) regime. A noticeable increase in the hydrophilicity of samples and their adhesion to coatings has been established. Changes in chemical composition and morphology of the surface resulting from plasma treatment and subsequent aging have been studied. The treatment regime have been established under which sufficient hydrophilicity is reached and mechanical strength is preserved.     

Mesoscopic simulations of the diffusivity of ethane in beds of NaX zeolite crystals: comparison with pulsed field gradient NMR measurements

Mesoscopic kinetic Monte Carlo simulations and pulsed field gradient nuclear magnetic resonance (PFG NMR) measurements are compared in order to investigate the transport of ethane in a bed of NaX crystals. A novel molecular mechanics particle-based reconstruction method is employed for the digital representation of the bed, enabling for the first time a parallel study of the real system and of a computer model tailored to reproduce the void fraction, particle shape and average size of the real system. Simulation of the long-range diffusion of ethane in the bed over the Knudsen, transient, and molecular diffusion regimes is consistent with the PFG NMR measurements in yielding tortuosity factors which depend upon the regime of diffusion; more specifically, tortuosity factors defined in the conventional way are higher in the Knudsen than in the molecular diffusion regime. Detailed statistical analysis of the computed molecular trajectories reveals that this difference arises in a nonexponential distribution of the lengths and in a correlation between the directions of path segments traversed between collisions with the solid in the Knudsen regime. When the Knudsen tortuosity is corrected to account for these features, a single, regime-independent value is obtained within the error of the calculations.