Determination of polycyclic aromatic hydrocarbons in Diesel soot by high-performance liquid chromatography

Summary The described identification and determination of polycyclic aromatic hydrocarbons (PAH) in Diesel soot is based on a class-fractionation using an open Al₂O₃-column and a following separation on a reversed-phase HPLC-column with post-chromatographic derivatization. The optimized analysis has been applied to the determination of PAH in soots from different engines such as locomotives and motor vehicles by variation of the fuel additives and different Diesel/water emulsions. The results obtained by locomotives show that a special Diesel/water emulsion emits a minor amount of mutagenic and cancerogenic polycyclic aromatic hydrocarbons, whereas the emission of the comparatively harmless compounds like phenanthrene and benzo(h)quinoline increases.     

南充市表层土壤中多环芳烃的源解析研究

运用同分异构体比率、聚类分析法和主成分因子载荷法对南充市表层土壤多环芳烃(PAHs)污染源进行了定性和定量分析。研究表明:同分异构体比率分析揭示表层土壤中PAHs污染来源以燃烧源为主;聚类分析将土壤中13种PAHs组分分成3个主群,3个主群分别指示为交通类PAHs污染、煤燃烧类PAHs污染和混合类PAHs污染。主成分因子/多元线性回归分析显示,PAHs主要来源于3大污染源,并定量计算了3种源的贡献量,其中交通燃油污染的贡献率最大(占42.4%),而燃煤燃烧排放、混合污染所占比例分别为32.4%和25.2%。     

Simultaneous determination of urinary hydroxylated metabolites of naphthalene, fluorene, phenanthrene, fluoranthene and pyrene as multiple biomarkers of exposure to polycyclic aromatic hydrocarbons

A method is presented for determining monohydroxy polycyclic aromatic hydrocarbons (OHPAHs) having 2-, 3- and 4-rings in human urine by using high-performance liquid chromatography with fluorescence detection. A urine sample containing conjugates of OHPAHs was hydrolysed in the presence of beta-glucuronidase/aryl sulfatase and the solution was cleaned up with a solid-phase extraction (C(18) and silica). Eight OHPAHs, namely 1- and 2-hydroxynaphthalenes, 2-hydroxyfluorene, 2-, 3- and 4-hydroxyphenanthrenes, 3-hydroxyfluoranthene and 1-hydroxypyrene, were separated and 1- and 9-hydroxyphenanthrenes co-eluted on an alkylamide-type reversed-phase column with fluorimetric detection. The urinary concentrations of OHPAHs were quantified by using deuterated 1-hydoxypyrene as an internal standard. The method showed good repeatability for inter- and intra-day precisions as well as good linearity of calibration curves (r (2) ranged from 0.996 to 0.999). The limits of detection (S/N=3) were in the range from 2.3 fmol to 2.2 pmol per injection. This method was successfully applied to urine samples from non-smoking taxi drivers, traffic policemen and rural villagers of Chiang Mai, Thailand. The results showed higher urinary concentrations of OHPAHs in rural villagers, consistent with higher respiratory exposure to PAHs.     

Border reactivity of polycyclic aromatic hydrocarbons and soot platelets toward ozone. A theoretical study

PAH-based models, with an even or odd number of unsaturated carbon atoms and π electrons (even and odd PAHs for short), are selected to investigate, by molecular and periodic methods, their electron distribution and border reactivity toward ozone, and also to represent local features and edge reactivity of even or odd soot platelets. These results will contrast those previously collected for the internal positions of similar even (J. Phys. Chem. A 2005, 109, 10929.) or odd systems (J. Phys. Chem. A 2008, 112, 973.). Topologically different peripheral positions, representative of armchair and zigzag borders, exhibit different reactivity right from the beginning. Ozone attacks start off either to give primary ozonides by concerted addition or, nonconcertedly, to first produce trioxyl intermediates. Then, a variety of pathways are described, whose viability depends on both model and position. They can open the way to the possible formation of epoxide, aldehyde, and phenol groups (all entailing O(2) production) or ether (+CO(2)), lactone (+H(2)CO), and ketone functionalities. To sum up, functionalization, regardless of how achieved, can give a number of groups, most of which actually observed in PAH ozonization experimental studies. This picture can be matched up to the results on internal sites of our preceding papers, for which epoxidation was the only outcome. Most interestingly, formation of a ketone group may turn an even system into an odd one (and conversely) while involving production of HOO(?).     

Laser-induced fluorescence of pyrene and other polycyclic aromatic hydrocarbons (PAH) in seawater

Polycyclic aromatic hydrocarbons (PAH) in the marine environment are currently of great concern due to their potential carcinogenicity. The standard methods of detection and quantification of PAH in seawater and sediments are costly, time-consuming and do not account for the heterogeneous nature of their distribution and sources. Laser-induced, time-resolved fluorescence spectroscopy may help to overcome these limitations. Several PAH have relatively long-lived stimulated fluorescence emissions, which allow them to be detected among a background of more intense but shorter-lived chromophores. Using time-delayed techniques we have shown an ability to detect PAH, principally pyrene, at environmental levels (ng l(-1)) both in the laboratory and in situ in Boston Harbor and other study areas. Further development may lead to the rapid determination of several PAH in typical near-shore marine environments.     

Closed-shell polycyclic aromatic hydrocarbon cations: a new category of interstellar polycyclic aromatic hydrocarbons

Density functional theory has been employed to calculate the harmonic frequencies and intensities of a range of polycyclic aromatic hydrocarbon (PAH) cations that explore both size and electronic structure effects on the infrared spectroscopic properties of these species. The sample extends the size range of PAH species considered to more than 50 carbon atoms and includes several representatives from each of two heretofore unexplored categories of PAH cations: (1) fully benzenoid PAH cations whose carbon skeleton is composed of an odd number of carbon atoms (C(odd) PAHs); and (2) protonated PAH cations (HPAH+). Unlike the radical electronic structures of the PAH cations that have been the subject of previous theoretical and experimental work, the species in these two classes have a 'closed'-shell electronic configuration. The calculated spectra of circumcoronene, C54H18, in both neutral and (radical) cationic form are also reported and compared with those of the other species. Overall, the C(odd) PAHs spectra are dominated by strong CC stretching modes near 1600 cm(-1) and display spectra that are remarkably insensitive to molecular size. The HPAH+ species evince a more complex spectrum consistent with the added contributions of aliphatic modes and their generally lower symmetry. Finally, for both classes of closed-shell cations, the intensity of the aromatic CH stretching modes is found to increase with molecular size far out of proportion with the number of CH groups, approaching a value more typical of neutral PAHs for the largest species studied.     

Palladium-catalyzed pentannulation of polycyclic aromatic hydrocarbons

We present a new and versatile one-step synthesis of a series of small molecular chromophores based on cyclopentannulated polycyclic aromatic hydrocarbons (PAH). Easily available pyrene, anthracene, and perylene bromides serve as starting materials for the reactions. The formation of the five-membered ring is achieved by the straightforward palladium(0)-catalyzed carbannulation with various substituted acetylenes. This approach is applicable either to single or multiple annulation procedures leading to hitherto inaccessible PAH topologies. According to the resulting products of the diverse reactions, a mechanistic explanation is proposed. UV/Vis absorption as well as cyclovoltammetric measurements were performed for characterization demonstrating the value of this annulation technique. Optical absorptions of up to 780 nm and absorption coefficients ranging from 8000 to 34,000 M(-1) cm(-1) were detected.     

Simplified determination of polycyclic aromatic hydrocarbons

Accurate quantitative analysis for selected polycyclic aromatic hydrocarbons present on urban dust can be obtained by using a simple procedure consisting of sonic-probe extraction with cyclohexane; clean-up with Florisil((R))-XAD-4((R)), and measurement by high-resolution gas chromatography with flame-ionization detection (HRGC/FID). The analysis can be further simplified by eliminating the clean-up step if HRGC/electron-impact mass-spectrometry (MS) is available. Both the FID and MS methods give results consistent with those obtained by standard procedures. The direct HRGC/MS procedure, combined with chemical ionization, can also be applied to the determination of polycyclic organic materials present in solvent-refined coal, shale oil and crude oil.     

Carcinogenicity of polycyclic aromatic hydrocarbons: A dialogue

A discussion between a biochemist and a theoretical chemist reviews the insights that quantum chemistry brings to polycyclic aromatic hydrocarbon carcinogenicity. Limitations as well as successes of the theory are described. The importance of communication between theorists and experimentalists in this complicated field is emphasized.     

Analysis of nitrated polycyclic aromatic hydrocarbons

Many nitrated polycyclic aromatic hydrocarbons (NPAH) that are present in low concentrations in the environment and in emission sources have been shown to be mutagenic and/or carcinogenic. This paper reviews the current methods of analysis of these compounds with the emphasis on NPAH measurements in ambient particulate matter samples.     

Ultrasonic micellar extraction of polycyclic aromatic hydrocarbons from marine sediments

In this present study the extraction of polycyclic aromatic hydrocarbons (PAHs) from marine sediments with a micellar medium of Polyoxyethylene 10 lauryl ether by an ultrasound-assisted method has been studied. Factorial design experiments were used in order to optimize the extraction parameters: extraction time, surfactant concentration and surfactant volume:amount of sediment relationship. The results suggest that surfactant concentration is statistically the most significant factor. The analysis of extracts has been carried out by HPLC with UV detection. Fortified sediments gave an average recovery between 86.7 and 106.6%, with relative standard deviation of 2.02-6.83% for PAHs with a ring number higher than three.     

Pressurised liquid extraction of polycyclic aromatic hydrocarbons from contaminated soils

The reliability and efficiency of the pressurised liquid extraction technique (PLE) for extracting polycyclic aromatic hydrocarbons (PAHs) from contaminated soil has been investigated. Experimental design was used to study the influence of seven extraction variables (sample load, solvents used, solvent ratios, pressure, temperature, extraction time, and rinse volume). The results show that large sample loads in combination with small solvent volumes may result in low extraction efficiency. They also indicate that the recovery of low-molecular-mass PAHs is reduced by low extraction temperatures. The exact settings of the other variables are, however, less significant for the extraction efficiency. Repeated extractions at optimised settings of the tested variables show that PLE is an exhaustive extraction technique that generally results in high yields. In addition, extraction of a certified reference material (CRM 103-100) revealed that the method is both accurate and precise. Another finding was that adding the internal standard on top of the soil in the extraction cell causes considerable over-estimation of the concentrations when large samples are extracted with small solvent volumes. This is because the PLE-cell resembles a chromatographic column, so compounds added to the top of the soil layer have a longer distance to travel through the soil compared to the average distance of the native compounds, which are distributed evenly throughout the column. We therefore recommend that the internal standard should be added to the extract immediately after the extraction or, alternatively, carefully mixed with the sample prior to extraction.     

Fluidized-bed extraction of polycyclic aromatic hydrocarbons from contaminated soil samples

Summary Due to the carcinogenity and ubiquity of polycyclic aromatic hydrocarbons in the environment they are of ongoing interest to analytical chemistry. In this study, a comparison of the classic Soxhlet extraction and, fluidized-bed extraction, has been conducted. The extraction of polycyclic aromatic hydrocarbons by this technique has been optimized considering as experimental variables the variation of the number of extraction cycles and the holding time after reaching the heating temperature by means of a surface response design. The significance of the operational parameters of the fluidized-bed extraction on the performance characteristics has been investigated. For the determination of the analytes a selective clean-up of the extracts followed by a fast gas chromatography method with mass spectrometric detection was used, resulting in low limits of detection (0.2 pg μL⁻¹). The accuracy of the complete analytical method was established by extraction and analysis of reference materials.     

Heat capacities of liquid polycyclic aromatic hydrocarbons

Liquid heat capacities of 14 aromatic hydrocarbons were measured using a DSC calorimeter. Measurements were performed in the temperature range 100 K above the melting temperature of each hydrocarbon. The lowest and highest temperatures considered were respectively 303 and 692 K. Experimental results were correlated using Benson's group contribution approach. The group parameters determined allow the experimental results to be represented to within 2%.