万古霉素及其杂质的亲水作用色谱分析

目前,万古霉素色谱分析方法主要为反相色谱法,该法分离万古霉素及其杂质时,存在极性选择性不足以及所使用的流动相体系与质谱兼容性差等问题。基于亲水作用色谱(HILIC)对糖肽类物质的色谱保留和极性选择性,本文选取万古霉素及其常见杂质为对象,考察了HILIC固定相、流动相组成比例、缓冲盐添加剂浓度和pH值等色谱条件,对万古霉素及其主要杂质进行了HILIC分离方法研究。确立了以Click XIon色谱柱为固定相,以甲酸铵为流动相添加剂的亲水作用色谱条件,实现了万古霉素及主要杂质的分离,为万古霉素类化合物的分离提供了新的途径。     

阴离子交换整体柱对蛋白质的分离与纯化

分别用乙二胺、二乙胺、三乙胺将自制的以甲基丙烯酸缩水甘油酯(GMA)为单体、乙二醇二甲基丙烯酸酯(EDMA)为交联剂的整体柱修饰为弱、强阴离子交换整体柱。考察了该整体柱的性能,选择出分离蛋白质(牛血清白蛋白、溶菌酶和谷胱甘肽)的最佳实验条件,并在最佳分离条件下考察了这些蛋白质在整体柱上的色谱行为和该整体柱对纤维素降解酶的分离纯化情况。实验结果表明,该整体柱性能良好,可以实现对纤维素降解酶的快速分离与纯化。同时,实验也证明采用梯度洗脱可以实现对某些蛋白质的分离纯化。     

Analysis of vancomycin and related impurities by micellar electrokinetic capillary chromatography. Method development and validation

A fast and highly selective micellar electrokinetic capillary chromatography (MEKC) method for quantitative analysis of vancomycin and related impurities is described. Among the tested surfactants, cetyltrimethylammonium chloride (CTAC) offered the best selectivity. Another important parameter, which strongly influenced the selectivity, was buffer pH. It was found that the selectivity increased with buffer pH decreasing from 9 to 5. Using Tris-phosphate buffer containing CTAC, satisfactory separation could be obtained in the pH range from 5.0 to 5.5. Excellent repeatability in terms of migration time and peak area could be obtained when the capillary was carefully washed between two runs. In order to obtain optimal conditions and to evaluate the method robustness, a central composite experimental design was carried out. The optimal conditions were: 44 cm length of fused-silica capillary with 50 microm ID, 120 mM Tris-phosphate buffer (pH 5.2) containing 50 mM CTAC, -15 kV applied voltage, UV detection at 210 nm, and a column temperature of 25 degrees C. Under the optimal conditions, more than 20 peaks could be separated within 8 min. The method has a linearity range from 0.004 to 1.2 mg/ml (concentration of vancomycin B, active component). The limit of detection (LOD) and limit of quantitation (LOQ) were 0.4 microg/mL vancomycin, equivalent to 0.3 microg/mL vancomycin B (0.04%) and 1.1 microg/mL vancomycin, equivalent to 0.9 microg/mL vancomycin B (0.1%), respectively.     

Development and validation of an improved liquid chromatographic method for the analysis of dirithromycin

The official method for the determination of dirithromycin and related substances in the European Pharmacopoeia (Ph. Eur.) and in the United States Pharmacopeia (USP) is an isocratic liquid chromatographic (LC) method using an ODS column. With this method, the separation of the main component dirithromycin from its epimer is not complete. Moreover, this method suffers sometimes from drift of the baseline and from subsequent quantitation problems. The required resolution is not easy to obtain.

Using an adapted method derived from the one prescribed in the pharmacopoeias, the selectivity of a set of more than 40 reversed-phase columns towards dirithromycin components was investigated. The selection of the most suitable column was achieved by the chromatographic response function (CRF) approach. Several changes were introduced to the method in order to improve the separation and to overcome the baseline drift problem. The resulting method uses a Zorbax Extend column maintained at 30 °C and a mobile phase containing acetonitrile, methanol, 2-propanol, water and a phosphate buffer at pH 7.5. The method allows a good separation of dirithromycin components, which is much better than that obtained with the existing methods. Several impurities of unknown identity are also separated. The method shows good repeatability, linearity and sensitivity, and it is robust. In addition, it proved to be applicable to a wide number of C18 reversed-phase columns.     

Investigation of vancomycin and related substances by liquid chromatography/ion trap mass spectrometry

Liquid chromatography (LC) methods compatible with mass spectrometry (MS) that are suitable for impurity profiling of vancomycin mixtures have not been described in the literature. The mobile phases of the existing methods contain non-volatile additives and/or solvents that give problems in combination with MS. In this paper, a reversed-phase LC/tandem mass spectrometry method is described for the investigation of vancomycin and related substances. The LC method uses a Zorbax Extend C18 column (250 x 4.6 mm i.d.), 5 microm, and a mobile phase consisting of methanol, water and ammonium acetate solution (pH 9.0). This method allows us to separate vancomycin and its impurities. Mass spectral data are acquired on an LCQ ion trap mass spectrometer equipped with an electrospray interface operated in the positive and negative ion modes. The LCQ is ideally suited for identification of impurities and related substances because it provides on-line LC/MSn capability, which allows efficient identification without time-consuming isolation and purification procedures. Using this method, the fragmentation of vancomycin and known derivatives was studied and the structures of six substances occurring in commercial samples were elucidated.     

Comparison of different types of stationary phases for the analysis of soy isoflavones by HPLC

Nowadays, there are new technologies in high-performance liquid chromatography columns available enabling faster and more efficient separations. In this work, we compared three different types of columns for the analysis of main soy isoflavones. The evaluated columns were a conventional reverse phase particle column, a fused-core particle column, and a monolithic column. The comparison was in terms of chromatographic parameters such as resolution, asymmetry, number of theoretical plates, variability of retention time, and peak width. The lower column pressure was provided by the monolithic column, although lower chromatographic performance was achieved. Conventional and fused-core particle columns presented similar pressure. Results also indicate that direct transfer between particle and monolithic columns is not possible requiring adjustment of conditions and a different method optimization strategy. The best chromatographic performance and separation speed were observed for the fused-core particle column. Also, the effect of sample solvent on the separation and peak shape was evaluated and indicated that monolithic column is the most affected especially when using higher concentrations of acetonitrile or ethanol. Sample solvent that showed the lowest effect on the chromatographic performance of the columns was methanol. Overall evaluation of methanol and acetonitrile as mobile phase for the separation of isoflavones indicated higher chromatographic performance of acetonitrile, although methanol may be an attractive alternative. Using acetonitrile as mobile phase resulted in faster, higher resolution, narrower, and more symmetric peaks than methanol with all columns. It also generated the lower column pressure and flatter pressure profile due to mobile phase changes, and therefore, it presents a higher potential to be explored for the development of faster separation methods.     

Optimization of capillary parameters for gas chromatography

An HETP equation for the capillary column is developed that takes into account the dependence of gaseous diffusion on pressure, the compressibility of the mobile phase, together with the unique relationship between mobile phase velocity, and the resistance to mass transfer in the stationary phase. The equation is used to develop a procedure for column optimization and expressions are derived that allow the optimum column radius and optimum column length to be calculated for a given fixed inlet pressure. It is shown that fast, simple separations are optimally achieved using relatively short small diameter columns. Conversely, optimum performance for the separation of complex mixtures requiring higher efficiencies requires the use of long columns with relatively large diameters.     

GC with LC-like packed capillary columns

Capillary columns of 0.3–0.35 mm internal diameter and 0.3–7.7 m length, packed with 3 to 30 μm octadecylsilica stationary phases as used for liquid chromatography, were applied to gas chromatographic separation of low boiling hydrocarbons. Van Deemter plots for these columns showed the optimum column efficiency to occur at linear velocities of 4–5 cm/s. A short column was applied to the rapid separation of components of a natural gas and impurities in standard gases, while a long column was applied to the separation of complex mixtures.     

Crystalline degradation products of vancomycin as chiral stationary phase in microcolumn liquid chromatography

The ability of crystalline degradation products (CDPs) of vancomycin as a chiral stationary phase was reported in a previous study for enantioselective separation of drugs, amino acids and agrochemical toxins by conventional LC column (250 x 4.6 mm). In this work, the potential of CDP of vancomycin for the enantiomeric separation in micro-LC (200 x 1 mm) has been studied. The obtained separation results are better than in our previous study with conventional LC columns. The enantiomers of D,L-phenylalanine, D,L-alanine, methyldopa, atropine and propranolol were used for this evaluation. Experiments have been carried out in a stainless steel tube that was packed with chiral silica particles of 3 and 12 microm diameters. Also, three different ratios of 3 and 12 microm silica particles were used for packing material of chiral columns and the effect on aspect ratio and resolving powers was compared.     

Comparison of pyrolysis-mass spectrometry with high performance liquid chromatography for the analysis of vancomycin in serum

Mass spectrometry coupled with a pyrolysis inlet system (Pyr-ms) is compared with high performance liquid chromatography (HPLC) for the determination of vancomycin and its crystal degradation products (CDP-Is) in human serum. Quantitative analysis of Pyr-ms was performed by selected ion monitoring (SIM) method at 108 mass:charge (m/z) of pyrolysis product of vancomycin. 3-Nitroaniline (138 m/z) was used as an internal standard. A mu-Bondapak C(18) column and the gradient mobile phase of triethylamine buffer (pH 6.2), acetonitrile and tetrahydrofuran and a photometric detection at 205 nm are found to be the optimum conditions for the HPLC determination of vancomycin and CDP-Is. The limit of detection (LOD=1 ng ml(-1)), linearity (1 ng ml(-1)-10 mg ml(-1)), relative standard deviation (R.S.D.=1%), time analysis (1/2 h) and sample volume (50 mul) of Pyr-ms are far better than of the HPLC method. However, the HPLC method can individually determine the concentration of vancomycin and its degradation products.     

An automated analyzer for vancomycin in plasma samples by column-switching high-performance liquid chromatography with UV detection

An automated analyzer for vancomycin in rat plasma by column-switching high-performance liquid chromatography (HPLC) with UV detection was developed. The method includes in-line extraction of vancomycin by ion-exchange cartridge column and a separation on a reversed-phase column with UV detection at 215 nm. Plasma samples were diluted by mobile phase solution and directly injected to HPLC. Vancomycin was quantitatively recovered from rat plasma samples. The separation was completed within 15 min. The calibration curve was linear over the range from 0.5 to 100 microg/mL with the detection and quantification limits of 0.5 microg/mL (2.5 ng on column; signal-to-noise ratio = 3). The values of precision in intra- and inter-day assays (n = 3) were less than 1.92 and 3.69%, respectively. This method does not require time-consuming pre-treatment and is suitable for the routine assay of plasma samples.     

Evaluation of an International Pharmacopoeia method for the analysis of nelfinavir mesilate by liquid chromatography

A gradient LC method for the determination of related substances in nelfinavir mesilate (NFVM) has been recently published in the International Pharmacopoeia. The method uses a base deactivated reversed phase C18 column (25 cm x 4.6 mm I.D.), 5 microm kept at a temperature of 35 degrees C. The mobile phases consist of acetonitrile, methanol, phosphate buffer pH 3.4 and water. The flow rate is 1.0 ml/min. UV detection is performed at 225 nm. A system suitability test (SST) is described to govern the quality of the separation. The separation towards NFVM components was investigated on 18 C18 columns and correlation was made with the column classification system developed in our laboratory. The method was evaluated using a Hypersil BDS C18 column (25 cm x 4.6 mm I.D.), 5 microm. A two level fractional factorial design was applied to examine the robustness of the method. The method shows good selectivity, precision, linearity and sensitivity. Seven commercial samples were examined using this method.     

Normal-phase high-performance liquid chromatography of tocopherols and tocotrienols. Comparison of different chromatographic columns

Natural vitamin E is composed of eight different vitamers (alpha-, beta-, gamma- and delta-tocopherols and alpha-, beta-, gamma- and delta-tocotrienols). As these eight vitamers have different antioxidant and biological activities, it is necessary to have quantitative data on each substance separately. The aim of this study was to find universal HPLC columns for the separation of all eight components and to test if a few columns of the same material (different batches) will give reproducible results. Normal-phase HPLC separations of vitamin E compounds in a prepared mixture (containing oat extracts, palm oil and tocopherol standards) were tried on six silica, three amino and one diol columns. As shown by calculations of retention factors (k), separation factors (alpha), numbers of theoretical plates (N) and resolutions (Rs), the best separations were obtained on three silica columns and two amino columns using 4 or 5% dioxane in hexane as the mobile phase as well as on a diol column using 4% tert.-butyl methyl ether in hexane as the mobile phase.     

Capillary Electrochromatography as a Method Development Tool for the Liquid Chromatographic Separation of DUP 654 and Related Substances

Capillary Electrochromatography (CEC) offers a rapid, economical, and efficient means for resolving nonionic compounds in the reversed phase mode on octadecylsilane (ODS) columns. A CEC optimization on a Hypersil ODS capillary column was employed to identify a suitable mobile phase for the pressure-driven (reversed phase ODS) separation of the anti-inflammatory 2-phenylmethyl-1-naphthol (DUP 654), and its related substances. The proportions of mobile phase modifiers methanol, acetonitrile, and water as well as pH were employed as variables in a stacked mixture design. Comparable response surface profiles were obtained for the CEC separations at pH 4 and pH 8. However, subtle differences were evident in the quality of separations obtained in the liquid chromatographic (LC) mode when using a specially-prepared column packed with exactly the same stationary phase as used in the CEC experiments. A mapping of the response surface for separations on a commercially available Hypersil ODS LC column revealed obvious differences. The differences indicate that the transfer of ODS based separation methods between CEC and LC involves more than simply transferring the conditions from one mode to the other.     

Optimization and characterization of the chiral separation of citalopram and its demethylated metabolites by response-surface methodology

Summary Response-surface modelling and sequential optimization have been used for optimization and characterization of the separation of the enantiomers of citalopram, desmethylcitalopram, and didesmethylcitalopram on an acetylated β-cyclodextrin column. In the model chosen the separation conditions mobile phase methanol content, buffer concentration, column temperature, and pH were varied to investigate their influence on the chromatography. It was found that what is good for selectivity within an enantiomer pair is bad for selectivity between enantiomer pairs. Because within-pair and between-pair selectivity does not reach its optimum at the same conditions, a middle course approach has to be followed. Use of an experimental design for this investigation enabled understanding of the mechanisms of within- and between-pair separation for citalopram, desmethylcitalopram, and didesmethylcitalopram. Sequential optimization can be a quicker means of optimizing a chromatographic separation; response-surface modelling, in addition to enabling optimization of the chromatographic process, also serves as a tool for leaming more about the separation mechanism.     

高效液相色谱法分析啤酒花浸膏中的6种酸性成分

建立了啤酒花浸膏中6种酸性成分(合葎草酮、葎草酮、加葎草酮、合蛇麻酮、蛇麻酮、加蛇麻酮)的高效液相色谱分析方法.分别考察了酸的加入、有机相种类及柱温对色谱分离效果的影响.在室温条件下,以Hypersil ODS2柱(250 mm ×4.6 mm,5 μm)为分析柱,以乙腈-0.1％(v/v)磷酸水溶液(pH 2.2)(...     

Comparison of the performance of conventional microparticulates and monolithic reversed-phase columns for liquid chromatography separation of eleven pollutant phenols

The performance of isocratic separations of 11 pollutant phenols (PP) using monolithic (Chromolith RP-18e) and conventional reversed-phase 5 microm (Luna and Purospher C18) and 4 microm (Synergi C12) particulate size columns, selected from high purity silica materials, has been compared. The separations have been optimized based on a previously optimized separation in which a reversed-phase C18 Luna column and acetonitrile as organic modifier were used, allowing the separation of all phenols tested in 23 min. The optimization process was carried out for each column by studying the effect of the mobile phase (acetonitrile as organic modifier, pH, flow-rate) on phenols separation. Under the optimized separation conditions, all phenols were separated in less than 23 min for all columns tested. Asymmetry factors were further evaluated and used to estimate column efficiency using the Dorsey-Foley equation. The efficiency and asymmetry factors were lower for Chromolith than for Purospher and Luna columns respectively. The Chromolith column was finally selected, due to its lower flow resistance, analysis time and good efficiency and asymmetry factors. The PPs separation was achieved in 3 min. The asymmetry factors were in the range 0.9-1.5 using 50mM acetate buffer (pH = 5.25)-ACN (64:36, v/v) as mobile phase, T=45 degrees C and 4.0 ml min(-1) flow-rate.     

色谱柱选择对23种防腐剂测定结果的影响

以化妆品中23种防腐剂检测方法为例,探讨色谱柱选择对液相色谱方法测定结果的影响。参照《化妆品安全技术规范》甲基异噻唑啉酮等23个组分的检验方法,在2台不同的高效液相色谱仪上用15款不同品牌、型号的C₁₈色谱柱检测23种防腐剂,计算色谱峰的理论塔板数和分离度,对23种组分的分离效果进行分析,并应用USP (United States Pharmacopeia)数据库和PQRI (Product Quality Research Institute)数据库等2种等效色谱柱选择方法,对不同色谱柱的分离效果及等效性进行评价和预测。实验结果表明,15款色谱柱对23种防腐剂的分离效果差异显著,仅有2款色谱柱可以实现23种组分的完全分离。USP和PQRI数据库中2种等效色谱柱选择方法均无法预测出合适的等效色谱柱,对23种防腐剂的液相色谱分析参考价值均较小。色谱柱是影响23种防腐剂液相色谱法测定结果准确性的关键因素,有关实验室在应用该方法时,应考虑色谱柱选择性差异。化妆品基质复杂,如何在现有研究成果的基础上,开发色谱柱的筛选和预测评价体系,进而指导实际样品的分离是下一步研究的重点、难点。建议有关部门在制修订检测方法时,注重色谱柱的耐用性考察,完善系统适应性指标,细化色谱柱分类和增加描述信息,指导色谱柱的合理选择,从而规避由于色谱柱使用过程中选择依据缺失而导致测定结果不准确的风险。     

A Comparison of Radially-Compressed and Stainless Steel Columns for the Reversed-Phase Ion-Pair Separation of Phencyclidine Synthetic Mixtures

Abstract

The reversed-phase ion-pair HPLC separation of phencyclidine synthetic mixtures was optimized utilizing Radial-Pak radially compressed columns. Variables examined in the optimization included column type (C-18, C-8, or CN), pairing ion (methane-, pentane-, hexane-, or octane sulfonates) and mobile phase composition (varying concentrations of methanol or acetonitrile in water). The chromatographic behavior of the phencyclidine mixtures in the various systems utilizing radially compressed columns is compared and contrasted to a similar previous study which examined similar variables on stainless steel columns. The optimum system for radially compressed columns was found to consist of a Radial-Pak C-18 column and a mobile phase of 85:15 MeOH:H₂O, 2.5% acetic acid, 1% triethylamine and 5mM sodium hexane sulfonate.