A selective and sensitive carbon composite coated platinum electrode for aluminium determination in pharmaceutical and mineral water samples

A novel coated wire electrode (CWE) for Al(III) ions is described based on 2-(1H-benzo[d]imidazole-1-yl)-1-phenylethanoneoxime as a new ionophore in carbon-PVC composite. The sensor exhibits significantly enhanced selectivity toward Al³⁺ ions over the concentration range 4.3 × 10⁻⁷ to 5.0 × 10⁻² M with a lower detection limit of 2.5 × 10⁻⁷ M and a Nernstian slope of 19.41 ± 0.52 mV decade⁻¹ of aluminium activity. This sensor has a short response time of about 10 s and is reproducible and stable for at least forty-five days. This proposed CWE which is designed for the first time revealed good selectivity for Al(III) over a wide variety of other cations. The performance of the sensor is best in the pH range of 3.1-5.5 and it also works well in partially non-aqueous medium. Moreover, the assembly has been successfully used as an indicator electrode in the potentiometric titration of aluminium (III) against EDTA and also in determining Al(III) quantitatively in pharmaceutical and mineral water samples.     

聚乙烯醇缩丁醛膜涂丝酶电极构造方法的研究

本文以三月桂胺为中性载体制成聚乙烯醇缩丁醛膜涂丝pH电极,再以该pH电极为换能器,采用三种共价交联固定化酶方法制成涂丝乙酰胆碱酯酶电极。该酶电极能用于测定0.1～10mmol/L浓度范围内的乙酰胆碱,响应时间在3～6min之内,寿命可达两个多月。     

涂碳型PVC膜培氟沙星选择电极的研制

报道一种以盐酸培氟沙星与溴汞酸盐生成的分子缔合物为电活性物质的新型涂碳PVC膜培氟沙星选择电极。在pH 1 .5～ 4.5范围内 ,电极对培氟沙星的Nernst响应范围为 1 .0× 1 0 - 2 ～ 5 .0× 1 0 - 5mol/L ,检测限为 4.2× 1 0 - 6mol/L。方法的平均回收率为 98.5 % ,RSD为 1 .0 %     

新型涂碳式双嘧达莫选择电极的研制与应用

报道了一种以双嘧达莫与碘化铋形成的缔合物为电活性物的新型涂碳式PVC膜双嘧达莫选择电极,测定了双嘧达莫片的含量。电极线性响应范围为1.0×10-2~2.2×10-5mol/L,级差电位为48 mV/pc,检出限为1.8×10-5mol/L。该电极响应迅速,重现性好,分析结果与药典法相符。     

涂碳型PVC膜氧氟沙星选择电极的研制与应用

报道了一种以氧氟沙星碘化物与碘化铋的分子缔合物为电活性物的新型涂碳ＰＶＣ膜氧氟沙星选择电极．电极的能斯特响应范围为１．０×１０－５～３．２×１０－２ｍｏｌ／Ｌ，斜率为３１ｍＶ／ｐＣ，电极响应迅速，重现性好．用此电极对药片中的氧氟沙星进行测定，结果与紫外分光光度法相符．     

Selective Determination of Zn2+ Ion in Various Environmental,Biological and Medicinal Plant Samples Using a Novel Coated Graphite Electrode

Novel Zn²⁺ ion‐selective PVC based coated graphite electrodes were fabricated using the ionophores N‐((1H‐indol‐3‐yl)methylene)thiazol‐2‐amine (I₁), N‐((1H‐indol‐3‐yl)methyl)‐thiazol‐2‐amine (I₂) and 1‐((1H‐indol‐3‐yl)methylene)urea (I₃). Their potentiometric performance was examined in dependence of the addition of plasticizers and anion excluders and compared. It is found that the coated graphite electrode with the composition I₁:KTpClPB:o‐NPOE:PVC=9 : 1.5 : 51 : 38.5 is the best with respect to the wide working concentration range (4.2×10^?8–1.0×10^?1 mol L^?1), low detection limit (1.6×10^?8 mol L^?1) and wide pH range of 3.0–8.0. The proposed electrode was successfully applied to quantify Zn²⁺ in various environmental, biological and medicinal plant samples and used as indicator electrode.     

Development of a New Coated Graphite Phenylephrine Potentiometric Sensor and Its Applications to Pharmaceutical and Biological Analysis

The construction and performance characteristics of a coated graphite phenylephrine‐selective electrode based on incorporation of the ion‐association complex of phenylephrine‐tetraphenylborate in plasticized PVC matrix was studied. The electrode exhibited a Nernstian slope of 59.0 mV/decade to phenylephrine over a wide concentration range from 3.0×10^?6 to 5.6×10^?2 M with a low detection limit of 1.5×10^?6 M. The proposed electrode manifested advantages of fast response, long life time and, most important, good selectivities for phenylephrine relative to a wide variety of common foreign inorganic cations, anions and also organic species. The electrode was successfully applied to determine phenylephrine in adult cold tablets, phenylephrine eye‐drops and also blood serum samples. The inclusion complex formation between α‐ and β‐cyclodextrine and phenylephrine was studied potentiometrically by the proposed electrode.     

Determination of cobalt ions at nano-level based on newly synthesized pendant armed macrocycle by polymeric membrane and coated graphite electrode

Poly(vinylchloride) (PVC) based membranes of macrocycles 2,3,4:9,10,11-dipyridine-1,3,5,8,10,12-hexaazacyclotetradeca-2,9-diene (L₁) and 2,3,4:9,10,11-dipyridine-1,5,8,12-tetramethylacrylate-1,3,5,8,10,12-hexaazacyclotetradeca-2,9-diene (L₂) with NaTPB and KTpClPB as anion excluders and dibutylphthalate (DBP), benzyl acetate (BA), dioctylphthalate (DOP), o-nitrophenyloctyl ether (o-NPOE) and tri-n-butylphosphate (TBP) as plasticizing solvent mediators were prepared and investigated as Co²⁺ selective electrodes. The best performance was observed with the membranes having the composition L₂:PVC:TBP:NaTPB in the ratio of 6:39:53:2 (w/w; mg). The performance of the membrane based on L₂ was compared with polymeric membrane electrode (PME) and coated graphite electrode (CGE). The PME exhibits detection limit of 4.7 × 10⁻⁸ M with a Nernstian slope of 29.7 mV decade⁻¹ of activity between pH 2.5 and 8.5 whereas CGE exhibits the detection limit of 6.8 × 10⁻⁹ M with a Nernstian slope of 29.5 mV decade⁻¹ of activity between pH 2.0 and 9.0. The response time for PME and CGE was found to be 11 and 8 s, respectively. The CGE has been found to work satisfactorily in partially non-aqueous media up to 35% (v/v) content of methanol, ethanol and 25% (v/v) content of acetonitrile and could be used for a period of 4 months. The CGE was successfully applied for the determination of Co²⁺ in real and pharmaceutical samples and as an indicator electrode in potentiometric titration of cobalt ion.     

Electroanalytical Studies on Cobalt(II) Ion‐Selective Sensor of Polymeric Membrane Electrode and Coated Graphite Electrode Based on N2O2 Salen Ligands

Poly(vinyl chloride)‐based membranes of salen ligands, 2‐((E)‐((1R,2S)‐2‐((E)‐5‐tert‐butyl‐2‐hydroxybenzylideneamino)cyclohexylimino)methyl)‐4‐tert‐butyl phenol (S₁) and 2‐((E)‐((1R,2S)‐2‐((E)‐3,5‐di‐tert‐butyl‐2‐hydroxybenzylideneamino)cyclohexylimino)methyl)‐4,6‐di‐tert‐butylphenol (S₂) were fabricated and explored as cobalt(II) selective electrodes. The performance of the polymeric membrane electrode (PME) and coated graphite electrode (CGE) were compared and it was observed that CGE showed a wide working concentration range of 1.1×10^?8 to 1.0×10^?1 mol L^?1 with a limit of detection of 7.0×10^?9 mol L^?1 exhibiting the Nernstian slope 29.6 mV/decade of activity in the pH range 3.0–9.0. It was used for the determination of cobalt(II) ions in water, soil, beer, pharmaceutical samples and medicinal plants and would be used as an indicator electrode in potentiometric titration with EDTA.