人工眼球晶体中残余单体的气相色谱法测定

近十年来,我国医疗界在眼科白内障手术中,采用植入后房型人工晶体,为失明患者带来了福音。虽然人工晶状体采用超级医用聚甲基丙烯酸甲酯为原料,但是由于它长期埋植在人体内,因此,对其理化性能的测试是十分必要的,其中,对人工晶体中残余单体的测定是选择原材和成品质量的关键。通常,人     

防灰雾剂对T-颗粒乳剂晶体表面形貌的影响

应用原子力显微镜对硫加金化学增感后的T 颗粒掺杂乳剂晶体表面形貌进行观察,直接测得了晶体颗粒的大小和厚度.颗粒表面精细结构观察显示样品表面并不平整,存在很多突起.这些突起呈线形平行排列,接近网格状.经曝光后突起变得更高,更集中.表面吸附足量的防灰雾剂后,晶体表面突起不明显.曝光后表面高度变化不大.     

基于温敏水凝胶的可调胶体晶体制备

基于单分散胶体粒子悬浊液在温敏水凝胶表面可以形成湿润型胶体晶体的现象, 利用温敏水凝胶对水的控释作用制备了温度敏感的可调制胶体晶体. 在室温下利用提拉法在温敏水凝胶聚N-异丙基丙烯酰胺(PNIPAAm)表面制备湿润型胶体晶体膜. 由于胶体粒子的有序排列, 胶体晶体显示出一个尖锐的反射峰. 当温度上升到34 ℃以上时, 由于PNIPAAm水凝胶中的水被释放, 导致胶体晶体中粒子浓度降低, 粒子间距增加; 反射峰发生红移. 这些特性可以通过温度变化进行调制.     

耗散型石英晶体微天平在生物医用高分子材料中的应用

石英晶体微天平(QCM)是一种基于石英晶体压电效应的分析检测技术,可实时在线提供石英晶体表面吸附层质量、厚度、粘弹性等信息,由此获得表面分子相互作用关系。 耗散型石英晶体微天平(QCM-D)因其独特的对粘弹性的解析,使其在高分子材料中的应用迅速发展,尤其是生物医用高分子材料领域,已用来评价生物医用高分子材料的表界面相互作用,力学和生物相容性等。 本文简单介绍了耗散型石英晶体微天平的基本原理及理论模型,重点综述了近几年QCM-D在高分子链构象、蛋白质吸附、生物大分子相互作用、药物释放以及水凝胶中的应用,并且展望了QCM-D的未来发展趋势。     

疏水性聚丙烯酸酯人工晶状体的低温等离子体改性

通过低温等离子体表面改性技术对疏水性聚丙烯酸酯人工晶状体进行表面改性, 并对改性前后材料的表面结构、形貌和光学性能进行了表征. 静态水接触角结果显示, 经过氨等离子体处理后的人工晶状体亲水性效果最好, 同时最佳的改性时间为120 s, 改性功率为150 W. XPS分析结果进一步证实, 经等离子体处理后, 在人工晶状体表面引入了极性基团. 原子显微镜观察结果显示, 改性后材料表面更加凹凸不平, 粗糙度显著增加而透光率变化很小, 但过大功率改性的样品透光率明显下降. 时效性测试结果表明, 人工晶状体在改性14 d后疏水性恢复趋于稳定.     

非线性光学有机晶体材料的研究进展

随着科技的进步和时代的发展,光电子技术将是21世纪的核心技术之一.对于光电子技术的发展,非线性光学材料,尤其是非线性光学晶体是不可缺少的关键材料.本文主要从分子设计方面概述了阴阳离子二元生色团体系、纯有机分子、纳米晶体和有机金属复合物等几种主要的非线性光学有机晶体材料的研究情况,并对其各自的特点做了简单的说明.     

高表面能晶面裸露的金属氧化物微纳米晶体的可控合成

表面结构是影响固体材料物理和化学性质的重要因素,由于高表面能的晶面上存在更多的表面悬挂键等,高表面能晶面裸露的微纳米晶体一般表现出很好的物理和化学活性．近年来,科研工作者针对高能面微纳米晶体材料的制备及性能调控进行了大量的研究工作并取得了一定的进展．本文重点讨论了高能面裸露的金属氧化物半导体微纳米晶体的合成制备方法．主要以本课题组近年在该领域的研究为例,分别从晶体生长过程中的静电作用法、“帽”式试剂保护法、过饱和度调控法、动力学调控法及选择性化学刻蚀法等几个方面对高表面能晶面裸露的金属氧化物微纳米晶体的制备进行了系统的总结．     

超强纳米颗粒溶液粘合剂

无论是自然界普遍存在的非共价键相互作用,还是共价键结合,都可以产生界面粘附.粘附材料的应用需求广泛,涉及可穿戴设备、电子器件、医疗手术等诸多领域.近些年来,仿生结构粘附材料和仿生粘合剂已经得到了快速的发展,一些人工制备的粘附材料已投入实际应用.然而,结构微加工的局限性和合成路线的复杂性限制了它们的大规模生产.相比而言,纳米颗粒溶液提供了一种更简单和更容易实现强粘附的替代方法.本文就最近报道的"强各向异性粘附的纤维素纳米晶体悬浮液"作一亮点评述.     

仿生制备功能性聚合物光子晶体

简述了自然界生物光子晶体经过不断的进化与演变而具有的一些特殊的性能,如亮丽的结构色彩、特殊的浸润性及高强度.受自然界生物光子晶体的这些特殊性能启发,通过对聚合物乳胶粒硬核软壳结构、表面功能基团及表面形貌的设计和调控等方法仿生制备了具有特殊浸润性的光子晶体;并在胶体晶体的聚合物乳胶粒间引入光交联聚合物,制备得到高强度的光子晶体;通过对蘑菇头形状乳胶粒两端的浸润性差异的设计制备,组装得到新型的各向异性结构的光子晶体.进一步发展了这些功能性光子晶体在湿度检测、油传感、自振荡体系等方面的应用.发展了通过喷涂、打印方法实现大面积、图案化聚合物光子晶体的简单制备.     

非传统晶体生长的早期观察

晶体早期生长的研究揭示,在某些体系中,晶体生长可能并不遵循传统路径.借由某些聚合物或生物分子的帮助,无机晶体的前驱体或纳米晶体在生长初期有可能聚集为无序的大块颗粒.这些聚集体表面晶化形成高结晶度高密度的外壳,随后完成从表面到核心的晶化过程.此逆向晶体生长机理在一些诸如沸石、钙钛矿、金属和金属氧化物等无机化合物体系中均已被发现,在其他材料体系里也将得到验证.认识这一新的晶体生长路径将给予我们更多的自由度来实现晶体形态控制,也有助于我们对于许多天然矿物形成机制的理解.本文简要回顾了最近本领域研究中一些典型逆向晶体生长的例子.     

Dichroism of absorption and polarization of phosphorescence of molecules of the closed form of nitrobenzospirothiopyran

The spectral-polarization characteristics of absorption and phosphorescence of molecules of the initial form of nitro-substituted indolinospirobenzothiopyran were studied in oriented polyethylene films and in solutions with different polarity. An oscillator model of the electron transitions responsible for the formation of absorption and luminescence spectra was suggested. It was established that the principal differences in the spectral and photophysical properties of the compound studied and its oxygen-containing analog are associated with the fact that the electronegativity of the S atom is lower than that of the O atom. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 6, pp. 1143–1146, June, 1997.     

非那雄胺合成工艺改进

非那雄胺能抑制5α-还原酶的活性,明显降低二氢睾酮水平,是一种治疗良性前列腺增生的有效药品。该合成工艺以甾烯酮酸为原料,将其与氯化亚砜反应,无须分离即与叔丁胺反应得17β-酰胺化合物,再氧化开环,环合,氢化,脱氢合成了非那雄胺。经元素分析、IR、1HNMR、13CNMR、MS分析表征了其结构。该法无须使用昂贵的2,2-二吡啶二硫化物和剧毒药品苯亚硒酸酐,且以乙酸铵代替氨气,降低了对设备的要求和腐蚀,更适用于工业生产。     

Determination of heats of detonation and influence of components of composite explosives on heats of detonation of high explosives

The heats of detonation of 20 simple high explosives and explosive mixtures were determined by means of an adiabatic detonation calorimeter designed by the authors. The results indicated that the performance of the instrument was reliable and the experimental data were very accurate. For explosive mixtures, there was a linear accumulative relationship between the heats of detonation of the explosive mixture and its components. Accordingly, the heats of detonation of explosive mixtures could be calculated directly from the heats of detonation of simple explosives and the characteristic heats of other components. The experiments showed that the gold or brass shell of the cylindrical charge could be substituted by a thick-walled porcelain shell, which had the advantage of cheapness.

     

Synthesis of phenolic components of Grains of Paradise

Two vanilloids, (5E)-8-(4-hydroxy-3-methoxyphenyl)oct-5-en-4-one (1) and 4-[3-hydroxydecyl]-2-methoxyphenol (2), isolated from the dried seeds of Grains of Paradise (Aframomum melegueta), were synthesized; the latter compound was made as the S-enantiomer and the material derived from the seeds was found to be a 1:1.7 mixture of the R and S isomers. The synthetic route used should allow the preparation of analogs having extended alkyl chains and consequently different lipophilicity, and 3, a homolog of 2, was also prepared.     

Summary of development of the theory of stability of colloids and thin films

In this review, the research of the author in the field of colloidal systems is summarized. The factors influencing colloidal stability are systematized and analyzed. Examples are presented to illustrate the practical utilization of the theory of stability of colloids and thin films.This review was prepared on the basis of the works of the author, which were awarded the State Premium for 1991 in the field of science and technology, chemistry section.Institute of Physical Chemistry, Russian Academy of Sciences, 117915 Moscow. Translated from Izvestiya Akademii Nauk, Seriya Khimicheskaya, No. 8, pp. 1708–1717, August, 1992.     

Study of hydration of two cements of different strengths

Main hydration products of two cement pastes, i.e. CSH-gel, portlandite (P) (and specific surface S) were studied by static heating, and by SEM, TEM and XRD, as a function of cement strength (C-33 and C-43) hydration time (th) and subsequent hydration in water vapour.Total change in mass on hydration and air drying, M_o, increased with strength of cement paste and with hydration time. Content of water escaping at 110 to 220°C, defined as water bound with low energy, mainly interlayer and hydrate water, was independent on cement strength but its content increased with (th). Content of chemically bound (zeolitic) water in CSH-gel, escaping at 220-400°C, was slightly dependent on strength and increased with (th). It was possibly derived from the dehydroxylation of CSH-gel and AFm phase. Portlandite water, escaping at 400-500°C, was independent on cement strength and was higher on longer hydration. Large P crystals were formed in the weaker cement paste C-33. Smaller crystals were formed in C-43 but they increased with (th). Carbonate formated on contact with air (calcite, vaterite and aragonite), decomposed in cement at 600-700^oC. It was high in pastes C-33(1 month) and C-43(1 month), i.e. 5.7 and 3.3%, respectively; it was less than 1% after 6 hydration months (low sensitivity to carbonation) in agreement with the XRD study showing carbonates in the air dry paste (1month), and its absence on prolonged hydration (6 months) and on acetone treatment. Water vapour treatment of (6 months) pastes or wetting-drying increased this sensitivity.Nanosized P-crystals, detected by TEM, could contribute to the cement strength; carbonate was observed on the rims of gel clusters.This revised version was published online in November 2005 with corrections to the Cover Date.     

氯氧化镁生成热的研究

用氧化镁氯化镁水溶液制备了8水合氯氧化镁[nMg(OH)2·MgCl2·8H2O], 并测定了其在盐酸中的溶解热, 实验结果表明, 氯氧化镁溶解热与n值呈线性关系, 根据溶解热求出5Mg(OH)2·MgCl2·8H2O和3Mg(OH)2·MgCl2·8H2O的生成热分别为-7727.1和5888.1kJ·mol^1^-。     

Thermodynamics of the formation of oxosulfides of rare-earth elements

The enthalpies of solution of several oxosulfides of rare-earth elements and the high-temperature enthalpies of oxosulfides and oxosulfates of lanthanum and yttrium were measured using solution calorimetry and high-temperature microcalorimetry techniques. Standard enthalpies of formation and some thermodynamic properties of oxosulfides and oxosulfates were calculated. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 2 pp. 294–297, February, 1997.     

探究“铁的锈蚀条件”实验创新设计

设计了铁的锈蚀实验,说明了铁钉的处理方法,增加了温度、酸、碱的影响条件,实现了铁跟蒸馏水及空气中氧气快速反应而生锈,使实验在5 min左右就能够得到准确的结果。