Mode-selective spatial filtering for increased robustness in a mode group diversity multiplexing link

We propose a very simple optical method to reduce the cross talk among the channels of a mode group diversity multiplexing (MGDM) link. MGDM is an intensity modulation, direct detection, multiple-input, multiple-output technique that creates independent communication channels over a multimode fiber (MMF). The cross talk among the channels is mitigated electronically. However, by properly employing a lens between the output of a graded-index MMF and the detectors, we achieve mode-selective spatial filtering (MSSF) and optically reduce the cross talk. The robustness of the link is then increased when compared with an implementation without MSSF. This allows for a larger number of channels.     

The inter-modes mixing effects in Mode Group Diversity Multiplexing

Multiplexing technology in indoor optical networks with multimode fibres allows the integration of several services to the end user. The Mode Group Diversity Multiplexing technique (MGDM) in Graded-Index Multi-Mode (GI-MMF) fibre makes the system less expensive with simpler transmitters and receivers, keeping the same information capacity as other multiplexing techniques. The capacity conservation and transmission quality obtained using MGDM technique depends on the transmission conditions and the state of fibre. Bending of the fibre can affect the system by changing modes excited for the different propagation channels in the fibre. In this paper an analytical modelling method for MGDM will be presented. Improvements in system sending and receiving conditions are studied. Modelling of the fibre curvature as well as the effects of coupling patterns on the MGDM are discussed.     

Experimental Study of Four-Wave Mixing in Semiconductor Laser Amplifier and its Application to Dispersion Compensation in Mid-Span Spectral Inversion System

Properties of four-wave mixing (FWM) in the semiconductor laser amplifier are studied experimentally in this paper. The optical phase conjugation of the mixing wave is applied to compensate the chromatic dispersion of transmission fiber. It is presented experimental results of the transmission of short optical pulses with 12-ps width over 204 km standard single mode fiber. The results confirm that mid-span spectral inversion (MSSI) employing FWM in a semiconductor laser amplifier is one of potential dispersion compensation techniques for optical transmission over standard single mode fiber with bit rate beyond 40Gb/s.     

Experimental Study of Four Wave Mixing in Semiconductor Laser Amplifier and its Application to Dispersion Compensation in Mid Span Spectral Inversion System

1　Ｉｎｔｒｏｄｕｃｔｉｏｎ　　Ｔｈｅｍｉｄｓｐａｎｓｐｅｃｔｒａｌｉｎｖｅｒｓｉｏｎｅｍｐｌｏｙｉｎｇｆｏｕｒｗａｖｅｍｉｘｉｎｇｉｎａｓｅｍｉｃｏｎｄｕｃｔｏｒｌａｓｅｒａｍｐｌｉｆｉｅｒ（ＳＬＡ）ｉｓｏｎｅｏｆｔｈｅｐｏｔｅｎｔｉａｌｃｈｒｏｍ?..     

Influence of mode coupling on mode group diversity multiplexing in multimode fibers

In this paper, the influence of mode coupling on mode group diversity multiplexing (MGDM) in multimode fibers is investigated. It is found experimentally, that in step index fibers mode coupling is very strong among the lowest mode groups. It is confirmed that mode coupling in graded index fibers is negligible. Theoretical and numerical investigation of the system performance in strong mode coupling conditions, indicates need for greater separation of the lowest MGDM channels.     

扩芯光纤原理及其在光器件耦合中的应用

介绍了两种可以增大单模光纤模场直径并出射准直平行光束的扩芯光纤(ECF)的原理和制作方法。分析了单模光纤熔接渐变折射率多模光纤法通过改变渐变折射率多模光纤的长度和自聚焦参量实现模场扩大缩小的原理,制作的扩芯光纤模场直径扩大到16．6μm,出射光束平行效果较好,轴向耦合容限比单模光纤扩大了近6倍。加热扩芯光纤则是通过控制加热温度和加热时间直接使单模光纤掺杂物质发生扩散,从而实现扩束和光束准直,模场直径达到15．4μm,横向、轴向耦合容限都比单模光纤有很大提高。因此扩芯光纤可以简化单模光纤的耦合对准过程,用来制作新型的单模光纤或掺铒光纤连接器,也可以用于其它光器件中与单模光纤的准直。     

Single-mode operation of a coiled multimode fiber amplifier

We report a new approach to obtaining single-transverse-mode operation of a multimode fiber amplifier in which the gain fiber is coiled to induce significant bend loss for all but the lowest-order mode. We demonstrated this method by constructing a coiled amplifier using Yb-doped, double-clad fiber with a core diameter of 25 microm and a numerical aperture of ~0.1 (V approximately 7.4) . When the amplifier was operated as an amplified-spontaneous-emission source, the output beam had an M(2) value of 1.09 +/- 0.09 ; when seeded at 1064 nm, the slope efficiency was similar to that of an uncoiled amplifier. This technique will permit scaling of pulsed fiber lasers and amplifiers to significantly higher pulse energies and peak powers and cw fiber sources to higher average powers while maintaining excellent beam quality.     

Analysis of rectangular resonant cavities in terahertz parallel-plate waveguides

We describe an experimental and theoretical characterization of rectangular resonant cavities integrated into parallel-plate waveguides, using terahertz pulses. When the waveguide is excited with the lowest-order transverse-electric mode, these cavities exhibit resonances with narrow linewidths. Broadband transmission spectra are compared with the results of mode-matching calculations, for various cavity dimensions.     

10 Gb/s symmetric WDM-PON using stable multi-longitudinal mode Brillouin/SOA fiber laser as upstream colorless source

We propose a stable multi-longitudinal Brillouin/semiconductor fiber laser(BSFL) as the upstream source in a bidirectional single-fiber wavelength-division multiplexing-passive optical network(WDM-PON).The downstream wavelength serves as the pump of the BSFL.Brillouin-frequency-shifted(～10.8 GHz) upstream carrier is generated to suppress the Rayleigh backscattering and back reflection-induced crosstalk.The stable multi-longitudinal operation of the BSFL,attributed to the four-wave mixing(FWM) effect in the semiconductor optical amplifier(SOA) reduces the difficulty of generating a stable single-longitudinal fiber laser-based upstream carrier.Bidirectional symmetric transmission at 10 Gb/s over a 12.5-km single mode fiber with less than 2-dB power penalty is demonstrated.     

Optical properties of high-delta air silica microstructure optical fibers

We analyze the waveguide properties of microstructure optical fibers consisting of a silica core surrounded by a single ring of large air holes. Although the fibers can support numerous transverse spatial modes, coupling between these modes even in the presence of large perturbations is prevented for small core dimensions, owing to a large wave-vector mismatch between the lowest-order modes. The result is an optical fiber that can appear single mode with propagation properties that can be achieved only in multimode waveguides.     

Polarization beam splitter based on a photonic crystal heterostructure

The design and characterization of a photonic crystal (PC) polarization beam splitter (PBS) that operates with an extinction ratio of greater than 15 dB for both polarizations are presented. The PBS is fabricated on a silicon-on-insulator (SOI) wafer where the input and output ports consist of 5 mum wide ridge waveguides. A large spectral shift is observed in the dispersion plots of the lowest-order even (TE-like) and odd (TM-like) modes due to the SOI confinement. Because of this shift, the TE-like mode is close to a directional gap at the top of the band, and the TM-like mode is in a low-frequency regime where the dispersion surface is almost isotropic. We show that the TE-like mode has very high reflection at the interface between the two PCs, whereas the TM-like mode exhibits a very high transmission.     

组合光纤中受激拉曼散射和四波混频研究

在抽运光和耦合条件不变的情况下,研究了熔接组合的非零色散位移单模光纤(NZDSF)和标准单模光纤(SMF)中的受激拉曼散射(SRS)和四波混频(FWM)产生和传输特征。采用532 nm脉冲激光抽运NZDSF,从20 m处开始产生以LP₀₁模传输的SRS第一级Stokes光;紧接着在30 m处产生了FWM,SRS受到FWM抑制,传输模式逐渐转化为LP₁₁模;经过80 m处熔接点后,由于熔接处双锥光纤结构使光场模式互相干涉,光波模式恢复为LP₀₁模,FWM受到抑制。该现象和机理有利于抑制密集波分复用(DWDM)系统中光学非线性失真和促进光孤子通信系统的发展。     

小芯径掺铒光纤与单模光纤低损耗接续的研究

报道了掺铒光纤放大器中降低掺铒光纤与单模光纤接续损耗的一种新方法，采用在芯区直径较小的掺铒光纤端部拉锥的方法，使得掺铒光纤中的传输模场在锥形区域内扩散，从而与单模光纤中直径较大的本征模场良好匹配，实现低损耗接续，初步实验结果表明，该方法可获得小于１ｄＢ的接续损耗。     

Ultrabroadband phase-matched optical parametric generation in the ultraviolet by use of guided waves

We present what is believed to be the first experimental demonstration of guided-wave phase-matched frequency mixing and harmonic conversion in gases. Broad-bandwidth ultrafast pulses, tunable around 270 nm, were generated from an ultrafast Ti:sapphire amplifier system using 2? + 2? - ? parametric wave mixing in a capillary waveguide. We achieved nonresonant phase matching by coupling both the fundamental and the second-harmonic light into the lowest-order mode. The output 3? pulses have an energy of >4muJ at a 1-kHz repetition rate. Simple extensions of this method can generate higher-energy 10-20-fs pulses tunable throughout the vacuum ultraviolet.     

Lowest-order mode transmission in multimode dielectric S-bends

This paper focuses on the problem of lowest-order mode (LOM) transmission in multimode S-bends given LOM input. Total loss calculations in S-bends using the finite difference beam propagation method (FDBPM) are compared with analytical results. Sine and cosine shaped slab S-bend geometries are studied to determine if mode conversion (to higher-order modes) can be controlled and/or suppressed altogether. Reduction of bending losses for the overall structure is also sought. It is also shown that loss rates for a fixed radius of curvature and total loss in an S-bend are not sensitive to the substrate index. Thus results determined in this paper are applicable to a range of substrate indices. Specifically, it is shown that the results are applicable to ion-exchange glass waveguides. This revised version was published online in November 2006 with corrections to the Cover Date.     

偏振光纤中受激四光子混频及其应用

本文给出了双折射光纤中不同模式和偏振组合时受激四光子混频的频移和双折射的关系。文中对正交分泵受激四光子混频应用于光纤总色散的测量进行了实验研究。     

1 550 nm单模锥形光纤模场的演化特性

根据光纤模式传输理论,结合单模锥形光纤的结构,使用有限差分光束传播法(FD-BPM)仿真了1 550 nm波长下光纤模式的传输,分析包层内模场和纤芯内模场之间的相互影响。仿真结果表明:因为包层模的存在,随着包层内模式数的减少和纤芯对模场约束状态的变化,锥形光纤纤芯内不同区域模场分布变化明显,模场的均方根宽度在不同区域有不同程度的起伏。通过数值计算得到了光纤内模场能量的分布,发现因为包层模的存在,纤芯内模场能量减小速度比没有包层模时的速度要慢。     

1 550 nm单模锥形光纤模场的演化特性

根据光纤模式传输理论,结合单模锥形光纤的结构,使用有限差分光束传播法(FD-BPM)仿真了1 550 nm波长下光纤模式的传输,分析包层内模场和纤芯内模场之间的相互影响。仿真结果表明：因为包层模的存在,随着包层内模式数的减少和纤芯对模场约束状态的变化,锥形光纤纤芯内不同区域模场分布变化明显,模场的均方根宽度在不同区域有不同程度的起伏。通过数值计算得到了光纤内模场能量的分布,发现因为包层模的存在,纤芯内模场能量减小速度比没有包层模时的速度要慢。     

单模光纤中四波混频的自诱导相位匹配

报道了无双折射单模光纤中四波混频的一种新型相位匹配方式,这种相位匹配仅由抽运光产生的自相位调制和互相位调制的共同作用即可提供,文中报道了实验结果,并从理论上成功地解释了该四波混频相位匹配的机理,与实验符合得很好。