纳米SiO2颗粒增强镍基复合镀层的组织与微动磨损性能研究

采用电刷镀技术在45#钢表面制备了纳米SiO2颗粒增强镍基复合镀层,用扫描电子显微镜和透射电子显微镜观察分析了复合镀层的表面形貌和微观组织形貌,用纳米压痕仪测试了复合镀层的微观力学性能,并采用PLINT型高温微动疲劳试验机考察了复合镀层在室温至500 ℃下的微动磨损行为.结果表明:纳米SiO2颗粒促进了镀层的晶粒细化,提高了镀层的力学性能,复合镀层的硬度和弹性模量分别比镍镀层提高了2.01GPa和5 GPa,从而改善了镀层的微动磨损性能;复合镀层的耐磨性能约为镍镀层的2倍,这是由于纳米SiO2颗粒对复合镀层具有超细晶强化、硬质点弥散强化以及高密度位错强化机制所致.     

Green synthesis and enhanced photocatalytic activity of Ce-doped TiO2 nanoparticles supported on porous glass

A facile and green method to prepare Ce-doped TiO₂ nanoparticles supported on porous glass beads is reported. An ion exchange process and subsequent calcination yielded Ce-doped TiO₂ nanoparticles with a mean size of 4.8 ± 0.3 nm. The nanoparticles were dispersed on the surface of porous glass beads. The addition of Ce enhanced the visible light absorption of the TiO₂ nanoparticles in the 400–500 nm spectral window. The band gap of the as-prepared catalyst was 2.80 eV. The Ce-doped TiO₂ nanoparticles immobilized on porous glass beads exhibited excellent photocatalytic activity for the visible-light-degradation of methyl orange (MO) and rhodamine B (RhB); with rate constants of 0.095 and 0.230 min⁻¹; respectively. The effects of Ce dosage; reaction duration; and initial solution pH on the conversion of MO and RhB dyes were investigated. The green synthesis and favorable photocatalytic activity makes the Ce-doped TiO₂ nanoparticles immobilized on porous glass an attractive alternative for the efficient degradation of organic pollutants.     

Enhanced wettability and thermal stability of nano-SiO2/poly(vinyl alcohol)-coated polypropylene composite separators for lithium-ion batteries

To improve the electrolyte wettability and thermal stability of polypropylene (PP) separators, nano-SiO₂/poly(vinyl alcohol)-coated PP composite separators were prepared using a simple but efficient sol–gel and dip-coating method. The effects of the tetraethoxysilane (TEOS) dosage on the morphology, wettability, and thermal stability of the composite separators were investigated using Fourier-transform infrared spectroscopy, scanning electron microscopy, and contact-angle measurements. All the composite separators gave a smaller contact angle, higher electrolyte uptake, and lower thermal shrinkage compared with the PP separator, indicating enhanced wettability and thermal stability. Unlike the case for a traditional physical mixture, SiOC covalent bonds were formed in the coating layer. The composite separator with a TEOS dosage of 7.5 wt% had a unique porous structure combining hierarchical pores with interstitial voids, and gave the best wettability and thermal stability. The ionic conductivity of the composite separator containing 7.5 wt% TEOS was 1.26 mS/cm, which is much higher than that of the PP separator (0.74 mS/cm). The C-rate and cycling performances of batteries assembled with the composite separator containing 7.5 wt% TEOS were better than those of batteries containing PP separators.     

Immobilization of TiO2 nanoparticles on activated carbon fiber and its photodegradation performance for organic pollutants

The immobilization of titanium dioxide(TiO2) on activated carbon fiber(ACF),(TiO2/ACF),was accomplished by sol-gel-adsorption method followed by calcination at temperatures varying from 300 to 600℃ in an argon atmosphere.The material properties were determined by scanning electron microscope(SEM),X-ray diffraction(XRD) and nitrogen adsorption.The photodegradation behavior of TiO2/ACF was investigated in aqueous solutions using phenol and methyl orange(MO) as target pollutants.The effects of calcination temperature,photocatalyst dosage,initial solution pH and radiation time on the degradation of organic pollutants were studied.It was found that organic pollutants could be removed rapidly from water by the TiO2/ACF photocatalyst and the sample calcined at 500℃ exhibited the highest removal efficiency.Kinetics analysis showed that the photocatalytic degradation reaction can be described by a first-order rate equation.In addition,the possibility of cyclic usage of the photocatalyst was also confirmed.Moreover,TiO2 is tightly bound to ACF and can be easily handled and recovered from water.It can therefore be potentially applied for the treatment of water contaminated by organic pollutants.