双金属离子调控型镍钴氧化物纳米片用于非对称超级电容器

通过水热-煅烧两步法制备了系列镍钴氧化物（NCO）纳米片。通过改变前驱体溶液中的镍、钴离子物质的量之比,进而调控NCO纳米片中的过渡金属离子比例。NCO纳米片的晶相、形貌和结构利用X射线衍射、扫描电子显微镜和X射线光电子能谱表征。此外,对NCO纳米片的电化学性能进行测试。结果表明,NCO-2（Ni_1.95Co₁O_x）纳米片在0.5 A·g^-1电流密度下,比电容为1 096.88 F·g^-1,且经过5 000次循环后具有78.26%的循环稳定性。以NCO-2为正极、活性碳为负极构成的非对称超级电容器,在功率密度为576 W·kg^-1时,能量密度为57.70 Wh·kg^-1。     

在碳纤维布上原位生长NiCo层状双氢氧化物纳米片用于高性能非对称超级电容器

通过恒电压电沉积法在不同的碳纤维基体上原位制备NiCo层状双金属氢氧化物(NiCo-LDH)复合材料(NiCo-LDH/碳纤维布),该方法 无需粘合剂,可以有效避免由于粘合剂的加入引起的导电性降低.在NiCo-LDH的层状晶体结构中,正电荷的主体层和层间电荷补偿阴离子可以促进电极材料之间的离子扩散,从而可高效利用活性位...     

NiS2纳米片的制备及其在非对称超级电容器中的应用

本文采用牺牲模板法,以Ni(OH)₂作为前驱体制备NiS₂. 通过对NiS₂进行XRD、EDS、BET、SEM及TEM等表征来研究NiS₂的元素组成及结构形貌. SEM及TEM结果显示前驱体及NiS₂均为纳米片结构. 电化学测试结果表明NiS₂存在着优秀的电容性能,在电流密度为1 A·g^-1时,NiS₂比电容能够达到1067.3 F·g^-1,同时具有高的倍率特性. 为了进一步探究NiS₂作为电活性材料的实用性,以NiS₂作为阳极材料,活性炭（AC）作为阴极组装成非对称超级电容器,在功率密度为0.8 kW·kg^-1,能量密度高达38.4 Wh·kg^-1,并且在3000次恒流充放电后,比电容依然保持93.7%.     

超级电容器用相互连接的类石墨烯纳米片

采用氧化镁模板耦合原位氢氧化钾活化法制备了超级电容器用煤焦油基相互连接的类石墨烯纳米片(IGNSs)。所制备的IGNS具有高达2887 m~2·g~(-1)的比表面积和大量的分级短孔。当作为超级电容器的电极材料时,在6 mol·L~(-1) KOH电解液中,于0.05 A·g~(-1)的电流密度下,IGNS显示出313 F·g~(-1)的高比容;在20 A·g~(-1)的电流密度下,IGNS的比电容为261F·g~(-1),显示了好的倍率性能;经过10000次循环测试后,其容量保持率为92.7%,展现了优异的循环稳定性。这一工作为从芳烃分子大规模生产高性能储能用类石墨烯纳米片提供了一种简单的方法。     

用于超级电容器的锰钴氧化物/碳纤维材料

The development of high-performance supercapacitor electrode materials is imperative to alleviate the ongoing energy crisis. Numerous transition metals (oxides) have been studied as electrode materials for supercapacitors owing to their low cost, environmental-friendliness, and excellent electrochemical performance. Among the developed binary transition metal oxides, manganese cobalt oxides typically show high theoretical capacitance and stable electrochemical performance, and are widely used in the electrode materials of supercapacitors. However, the poor conductivity and active material utilization of manganese cobalt oxide-based electrode materials limit their potential capacitance application. Cotton is mainly composed of organic carbon-containing materials, which can be transformed to carbon fibers after calcination. The resultant carbonaceous material exhibits a large specific surface area and good conductivity. Such advantages could potentially suppress the negative effects caused by the poor conductivity and small specific surface area of manganese cobalt oxides, thereby improving the electrochemical performance. Herein, we firstly deposited manganese cobalt oxides on cotton by a simple hydrothermal method, yielding a composite of manganese cobalt oxides and carbon fibers via subsequent calcination, to improve the electrochemical performance of the electrode material. X-ray diffraction (XRD), field-emission scanning electron microscopy (FESEM), X-ray photoelectron spectroscopy (XPS), Brunauer-Emmett-Teller (BET), thermogravimetric analysis (TGA), and electrochemical characterizations were used to investigate the physical, chemical, and electrochemical properties of the prepared samples. The fabricated manganese cobalt oxides in the composite were uniformly dispersed on the carbon fiber surface, which increased the contact between the interface of the electrode material and electrolyte, and enhanced electrode material utilization. The electrode material was confirmed to have well contacted with the electrolyte during a contact angle test. Hence, a pseudo-capacitance reaction completely occurred on the manganese cobalt oxide material. Moreover, the addition of carbon fibers reduced the resistance of the material, resulting in excellent capacitive performance. The capacitance of the prepared composite was 854 F∙g^-1 at a current density of 2 A∙g^-1. The capacitance was maintained at 72.3% after 2000 cycles at a current density of 2 A∙g^-1. These results indicate that the manganese cobalt oxide and carbon fiber composite is a promising electrode material for high-performance supercapacitors. The findings presented herein provide a strategy for coupling with carbon materials to enhance the performance of supercapacitor electrode materials based on manganese cobalt oxides. Thus, novel insights into the design of high-performance supercapacitors for energy management are provided.     

自掺杂氮多孔交联碳纳米片在超级电容器中的应用

自掺杂氮的多孔交联碳纳米片（N-ICNs）是将蒲公英种子通过一步活化碳化法制备的.蒲公英种子本身富含氮,不需要进行额外的掺杂处理,可以作为理想的碳前驱体.通过X射线衍射（XRD）、扫描电子显微镜（SEM）、透射电子显微镜（TEM）对所制备的碳材料的微观形貌和组成成分进行了表征.基于高含氮量（2.88%）,N-ICNs在1 A·g^-1下具有337 F·g^-1的比电容和优异的倍率性能.此外,由N-ICNs组合成的对称型超级电容器在操作电压范围为0~2 V时具有很高的能量密度（25.3 Wh·kg^-1）和功率密度（900 W·kg^-1）,并且在循环10000次后仍具有98%的电容保持率.因此,N-ICNs将是一种非常理想的电极材料.     

镍掺杂花状纳米碳片的制备及其在超级电容器中的应用

本文通过溶剂热法"一锅"制备了镍掺杂的花状纳米碳片(Ni/FCNAs)。借助X射线衍射仪(XRD)、扫描电子显微镜(SEM)和透射电子显微镜(TEM)对该复合材料的表面形貌和结构进行了分析。循环伏安和恒流充/放电测试结果表明,Ni/FCNAs具有较大的比电容值且电化学稳定性良好。在电流密度为0.1 A.g-1时,Ni/FCNAs电极的比电容可达176 F.g-1。本文同时也提出了Ni/FCNAs可能的形成机理。     

纳米纤维素/还原氧化石墨烯复合材料用于高性能超级电容器

以高浓度氧化石墨烯(GO)溶液作为反应前驱体,纳米纤维素(NC)作为物理间隔物和电解液储存器,通过简单的一步水热法制备了纳米纤维素/还原氧化石墨烯(NC/rGO)复合材料,并探究了其作为超级电容器电极材料的潜力。结果如下：NC添加量为1 mL所制备的NC/rGO-1具有最佳电化学性能。基于NC/rGO-1的无黏合剂对称型超级电容器在0.3 A·g^-1的电流密度下显示出了 269.33 F·g^-1和 350.13 F·cm^-3的高质量和体积比电容,并在 10.0 A·g^-1时仍能达到 215.88 F·g^-1和 280.62 F·cm^-3(其初始值的 80.15%)。组装器件还显示出了较高的质量和体积能量密度(9.3 Wh·kg^-1和 12.13 Wh·L^-1)和出色的循环性能(10 A·g^-1下10 000次循环后其初始比电容仅减少6.02%)。     

纳米纤维素/还原氧化石墨烯复合材料用于高性能超级电容器

以高浓度氧化石墨烯(GO)溶液作为反应前驱体,纳米纤维素(NC)作为物理间隔物和电解液储存器,通过简单的一步水热法制备了纳米纤维素/还原氧化石墨烯(NC/rGO)复合材料,并探究了其作为超级电容器电极材料的潜力。结果如下：NC添加量为1 mL所制备的NC/rGO-1具有最佳电化学性能。基于NC/rGO-1的无黏合剂对称型超级电容器在0.3 A·g^-1的电流密度下显示出了269.33 F·g^-1和350.13 F·cm^-3的高质量和体积比电容,并在10.0 A·g^-1时仍能达到215.88 F·g^-1和280.62 F·cm^-3(其初始值的80.15%)。组装器件还显示出了较高的质量和体积能量密度(9.3 Wh·kg^-1和12.13 Wh·L^-1)和出色的循环性能(10 A·g^-1下10 000次循环后其初始比电容仅减少6.02%)。     

基于NiCo2O4纳米片电极的非对称混合电容器

The looming global energy crisis and ever-increasing energy demands have catalyzed the development of renewable energy storage systems. In this regard, supercapacitors (SCs) have attracted widespread attention because of their advantageous attributes such as high power density, excellent cycle stability, and environmental friendliness. However, SCs exhibit low energy density and it is important to optimize electrode materials to improve the overall performance of these devices. Among the various electrode materials available, spinel nickel cobaltate (NiCo₂O₄) is particularly interesting because of its excellent theoretical capacitance. Based on the understanding that the performances of the electrode materials strongly depend on their morphologies and structures, in this study, we successfully synthesized NiCo₂O₄ nanosheets on Ni foam via a simple hydrothermal route followed by calcination. The structures and morphologies of the as-synthesized products were characterized by X-ray diffraction, scanning electron microscopy, and Brunauer-Emmett-Teller (BET) surface area analysis, and the results showed that they were uniformly distributed on the Ni foam support. The surface chemical states of the elements in the samples were identified by X-ray photoelectron spectroscopy. The as-synthesized NiCo₂O₄ products were then tested as cathode materials for supercapacitors in a traditional three-electrode system. The electrochemical performances of the NiCo₂O₄ electrode materials were studied and the area capacitance was found to be 1.26 C·cm^-2 at a current density of 1 mA·cm^-2. Furthermore, outstanding cycling stability with 97.6% retention of the initial discharge capacitance after 10000 cycles and excellent rate performance (67.5% capacitance retention with the current density from 1 to 14 mA·cm^-2) were achieved. It was found that the Ni foam supporting the NiCo₂O₄ nanosheets increased the conductivity of the electrode materials. However, it is worth noting that the contribution of nickel foam to the areal capacitance of the electrode materials was almost zero during the charge and discharge processes. To further investigate the practical application of the as-synthesized NiCo₂O₄ nanosheets-based electrode, a device was assembled with the as-prepared samples as the positive electrode and active carbon (AC) as the negative electrode. The assembled supercapacitor showed energy densities of 0.14 and 0.09 Wh·cm^-3 at 1.56 and 4.5 W·cm^-3, respectively. Furthermore, it was able to maintain 95% of its initial specific capacitance after 10000 cycles. The excellent electrochemical performance of the NiCo₂O₄ nanosheets could be ascribed to their unique spatial structure composed of interconnected ultrathin nanosheets, which facilitated electron transportation and ion penetration, suggesting their potential applications as electrode materials for high performance supercapacitors. The present synthetic route can be extended to other ternary transition metal oxides/sulfides for future energy storage devices and systems.     

Enriching redox active sites by interconnected nanowalls-like nickel cobalt phospho-sulfide nanosheets for high performance supercapacitors

Although transition metal phospho-sulfides deliver outstanding electrochemical performance, complex preparation methods hindered their further development. Herein, we report a facile one-step electrodeposition approach to deposit interconnected nanowalls-like nickel cobalt phospho-sulfide (Ni-Co-P-S) nanosheets onto the surface of carbon cloth. The thin Ni-Co-P-S nanosheets with multi-components and synergetic effects delivered rich active sites, further enhancing reversible capacitance. Therefore, the as-prepared Ni-Co-P-S electrode materials exhibit excellent electrochemical performance in a three-electrode system, showcasing a high specific capacitance of 2744 F/g at 4 A/g. The full supercapacitors based on Ni-Co-P-S as positive electrode and active carbon as negative electrode showcase a high specific capacitance of 110.9 F/g at 1 A/g, impressive energy density of 39.4 Wh/kg at a power density of 797.5 W/kg in terms of excellent cycling stability (91.87% retention after 10,000 cycles). This simple electrode position strategy for synthesizing Ni-Co-P-S can be extended to prepare electrode materials for various sustainable electrochemical energy storage/conversion technologies.     

Nickel‐substituted cobalt ferrite nanoparticles supported on arginine‐modified graphene oxide nanosheets: Synthesis and catalytic activity

The amino acid arginine was used to modify the surface of graphene oxide nanosheets and then nickel‐substituted cobalt ferrite nanoparticles were supported on those arginine‐grafted graphene oxide nanosheets (Ni_0.5Co_0.5Fe₂O₄@Arg–GO). The prepared Ni_0.5Co_0.5Fe₂O₄@Arg–GO was characterized using flame atomic absorption spectroscopy, inductively coupled plasma optical emission spectrometry, energy‐dispersive spectroscopy, Fourier transform infrared spectroscopy, ultraviolet–visible spectroscopy, Raman spectroscopy, X‐ray diffraction, thermogravimetric analysis, scanning electron microscopy and transmission electron microscopy. The application of Ni_0.5Co_0.5Fe₂O₄@Arg–GO as a catalyst was examined in a one‐pot tandem oxidative cyclization of primary alcohols with o ‐phenylenediamine to benzimidazoles under aerobic oxidation conditions. The results showed that 2‐phenylbenzimidazole derivatives were successfully achieved using Ni_0.5Co_0.5Fe₂O₄@Arg–GO nanocomposite catalyst via the one‐pot tandem oxidative cyclization strategy.     

A dandelion-like carbon microsphere/MnO2 nanosheets composite for supercapacitors

This article reported the electrochemical performance of a novel cabon microsphere/MnO₂ nanosheets (CMS/MnO₂) composite prepared by a in situ self-limiting deposition method under hydrothermal condition. The results of scanning electron microscopy (SEM) and transmission electron microscopy (TEM) revealed that MnO₂ nanosheets homogeneously grew onto the surface of CMS to form a loose-packed and dandelion-like core/shell microstructure. The unique microstructure plays a basic role in electrochemical accessibility of electrolyte to MnO₂ active material and a fast diffusion rate within the redox phase. The results of cyclic voltammetry, galvanostatic charge/discharge and electrochemical impedance spectrometry indicated that the prepared CMS/MnO₂ composite presented high capacitance of 181 F·g⁻¹ and long cycle life of 61% capacity retention after 2000 charge/discharge cycles in 1 mol/L Na₂SO₄ solution, which show strong promise for high-rate electrochemical capacitive energy storage applications.     

Low-temperature aqueous phase oxidation of cyanide ions with the participation of nickel oxide system

The low-temperature oxidation of cyanide ions to CO₂ and N₂ in an aqueous phase in the presence of Ni-oxide system has been studied. The effect of pH, temperature and catalyst amount on the rate and selectivity of the oxidation process have been investigated. A kinetic model of the reaction studied is proposed based on the experimental results. It can be used to develop a catalytic method for purification of CN containing wastewaters.     

PVC matrix membrane electrodes based on cobalt and nickel phenanthroline complexes for selective determination of cobalt(II) and nickel(II) ions

Potentiometric sensors for determining cobalt and nickel ions are described. They are based on the use of cobalt and nickel tris(1,10-phenanthroline)-TPB as electroactive compounds dispersed in plasticized poly(vinyl chloride) matrix. The sensors exhibit fast, near-Nernstian responses for cobalt and nickel-phenanthroline cations over the pH range 3–11 with a slope of 30.3 ± 0.3 mV/concentration decade. In the presence of excess 1,10-phenanthroline reagent, cobalt(II) and nickel(II) ions at concentration levels as low as 4 × 10^–6 M are accurately determined. The results show an average metal ion recovery of 98.5% with a mean standard deviation of 0.5%. Cobalt in organometallic compounds and nickel in silicate rocks are determined by these sensors and results agreeing fairly well with atomic absorption spectrometry are obtained.     

不对称二亚胺异双核钴镍催化剂的合成及乙烯聚合研究

合成了不对称异双核钴镍催化剂MN5CoNi.该催化剂经AlEt3,MMAO,AlEt3/[PhMe2NH][B(C6F5)4](B)或MMAO/B活化后用于乙烯聚合.异双核催化剂与相应的等摩尔双组分混合单核催化剂相比,以TEA作助催化剂时,异双核催化剂的Co和Ni中心的活性都远低于双组分混合体系,且Ni中心生成的聚乙烯含量低于双组分混合体系,异双核催化剂中的Co和Ni中心同时被抑制.以MMAO作助催化剂时,异双核催化剂的活性虽低于双组分混合体系,但是异双核催化剂中的两种金属中心的活性都有了较大的提高,且Ni中心生成的聚乙烯含量高于后者.同时考察了活性随时间变化,发现异双核催化剂中活性衰减比双组分混合体系慢,说明异双核体系中Co和Ni中心在MMAO活化下比双组分混合体系的金属中心更稳定.当以TEA/B作助催化剂时,异双核催化剂中Co和Ni中心的活性有所提高,但仍远低于双组分混合体系,且Ni中心生成的聚乙烯含量低于后者,说明Ni被选择性抑制.当使用MMAO/B作助催化剂时,结果与MMAO类似.     

Simultaneous determination of cobalt,nickel and iron by multi-wavelength spectrophotometry

A method for the simultaneous spectrophotometric determination of cobalt, nickel and iron based on the formation of their complexes with 1,5-bis(di-2-pyridylmethylene) thiocarbonohydrazide is proposed. The absorption curves of these complexes overlap severely in the scanning range 390–510 nm. The analyte concentrations are calculated by a least squares fit of the pure spectra to the mixture spectra, which therefore makes the simultaneous determination of these metallic ions possible without tedious pretreatment. The detection limits afforded by the proposed method range from 0.05 g/ml for Fe and Ni to 0.1 g/ml for Co. Root-mean-squared errors of prediction of 0.085 g/ml for Co, 0.048 g/ml for Ni and 0.1172 g/ml for Fe were obtained using the wavelength range 400–510 nm and 0.147 g/ml for Co, 0.107 g/ml for Ni and 0.127 g/ml for Fe using the wavelength range 420–434 nm. The effect of interferences is studied and the proposed method is applied to analysis for the above elements in synthetic samples and real samples, such as biological materials and alloys.     

Thermal decomposition of nicotinate complexes of cobalt and nickel in dynamic nitrogen atmosphere

Thermal decomposition of cobalt and nickel nicotinate was studied by TG, DTG and DSC. The mechanism of decomposition has been established from TG and DSC data. The kinetic parameters namelyE, A together with ΔH were calculated from DSC curves using mechanistic and non-mechanistic integral equations.

---

Zusammenfassung Mittels TG, DTG und DSC wurde die thermische Zersetzung von Cobaltund Nickelnikotinat untersucht. Der Zersetzungsmechanismus wurde anhand der TG-und DSC-Daten entwickelt. Die kinetischen ParameterE, A wurden zusammen mit ΔH anhand der DSC-Kurven mit Hilfe von mechanistischen und nichtmechanistischen Integrationsgleichungen berechnet.

     

Four-component relativistic computational NMR study of ferrous,cobalt and nickel bisglycinates

1. Download : Download high-res image (66KB)
2. Download : Download full-size image