Syntheses,structures of N‐(substituted)‐2‐aza‐[3]‐ferrocenophanes and their application as redox sensor for Cu2+ ion

Rigid N‐(substituted)‐2‐aza‐[3]‐ferrocenophanes L1 and L2 were easily synthesized from 1,1 ‐dicarboxyaldehydeferrocene and the corresponding amines. Ligands L1 and L2 were characterized by ¹H NMR, ¹³C NMR and single‐crystal X‐ray crystallography. The coordination abilities of L1 and L2 with metal ions such as Cu²⁺, Mg²⁺, Ni²⁺, Zn²⁺, Pb²⁺ and Cd²⁺ were evaluated by cyclic voltammetry. The electrochemical shift (ΔE_1/2) of 125 mV was observed in the presence of Cu²⁺ ion, while no significant shift of the Fc/Fc + couple was observed when Mg²⁺, Ni²⁺, Zn²⁺, Pb²⁺, Cd²⁺ metal ions were added to the solution of L1 in the mixture of MeOH and H₂O. Moreover, the extent of the anodic shift of redox potentials was approximately equal to that induced by Cu²⁺ alone when a mixture of Cu²⁺, Mg²⁺, Ni²⁺, Zn²⁺, Pb²⁺ and Cd²⁺ was added to a solution of L1. Ligand L1 was proved to selectively sense Cu²⁺ in the presence of large, excessive first‐row transition and late‐transition metal cations. The coordination model was proposed from the results of controlled experiments and quantum calculations. Copyright © 2012 John Wiley & Sons, Ltd.     

Study of some metallic silicates as ion-exchangers

The extraction of ammine complexes of Cu²⁺, Cd²⁺, Ni²⁺, Co²⁺ and Zn²⁺ by synthesised manganese, nickel and zinc silicates has been studied at different pH and ionic concentrations in the external solution. It has been found that the uptake of the metal ion Co²⁺, Cu²⁺ and Zn²⁺ increases with increase in pH of the external solution, attains a maximum and then decreases. However, the uptake for Cd²⁺ and Ni²⁺ increases continuously. The q_A values of all the silicates increases with the increase in the concentration of the exchanging ion and its order for the investigated metal ions is Ni²⁺ < Co²⁺ < Cd²⁺ < Zn²⁺ < Cu²⁺.     

Out-cage metal ion coordination by novel benzoazacrown bisamides with carboxyl,pyridyl and picolinate pendant arms

A new series of macrocyclic diamides with carboxyl, pyridyl and picolinate pendant arms have been synthesized and the stability constants of their complexes with Ni²⁺, Cu²⁺, Zn²⁺, Cd²⁺, Pb²⁺ in water were determined. Complexes with a stoichiometry of 1 : 1 (M: L) were found for all ligands with the exception of 15-membered crown ethers with one pendant carboxyl or pyridine group. The ligand containing two picolinate backbone groups exhibits the highest values of the stability constants for all studied cations (logβ_ML?=?12.5–15.7). X-ray study of free ligands showed that the introduction of benzene and amide fragments into the macrocyclic moiety provides a flatten open structure of the ligand. The crystallographic analysis of Cu²⁺ and Zn²⁺ complexes revealed the external coordination of the metal atom by amine N atoms of the macrocycle and heteroatoms of the pendant groups.     

Polarographic and voltammetric investigations in N-methylpyrrolidinone(2) and N-methylthiopyrrolidinone(2)

Polarographic and voltammetric methods were employed to study the influence of N-methylpyrrolidinone(2) (NMP) and N-methylthiopyrrolidinone(2) (NMTP) towards a series of cations. In NMP reversible electrode reactions were observed for Na⁺, K⁺, Tl⁺, Zn²⁺, Cd²⁺, Cu²⁺, Ag⁺ and irreversible reductions for Ba²⁺, Mn²⁺, Co²⁺ and Ni²⁺. 0.1 mol l^?1 tetraethylammoniumperchlorate solutions served as supporting electrolytes. Li⁺ was not electroactive in the supporting electrolyte mentioned, but yielded an irreversible cathodic wave in tetra-n-butylammonium perchlorate. In NMTP, Li⁺, Na⁺, Tl⁺, Zn²⁺, Cd²⁺, Cu⁺ and Ag⁺ gave reversible cathodic waves on the DME, while Mn²⁺, Co²⁺ and Ni²⁺ were reduced in an irreversible electrode process. Bisbiphenylchromium iodide serving as a reference system throughout this study showed reversible behaviour in both solvents. A comparison of E_1/2 for given ions in both solvents showed a shift of about 0.5 V to more positive values in the case of a typically hard cation such as Na⁺ whereas soft cations such as Ag⁺ and Cu⁺ shifted by more than 0.8 V to more negative values. The effects of these two solvents on the cations studied is discussed in terms of donor acceptor interactions between the cation and the solvent molecules with special respect to the changes caused by replacing the oxygen atom in NMP by a sulphur atom.     

1:1 Metal Complexes of Bivalent Cobalt,Nickel, Copper,Zink, and Cadmium with the Tripodal Ligand tris[2-(dimethylamino)ethyl]amine: Their stabilities and the X-ray crystal structure of its copper(II) complex sulfate

The complex formation by Co²⁺, Ni²⁺, Cu²⁺, Zn²⁺, and Cd²⁺ with tris[2-(dimethylamino)ethyl]amine (N(CH₂CH₂NMe₂)₃, Me₆tren) was investigated at 25° and at an ionic strength of 1, using VIS spectroscopy and potentiometric measurements. The stability constants of these complexes are compared with those of tris(2-aminoethyl)amine (N(CH₂CH₂NH₂)₃, tren), obtained under the same conditions. The values of the constants for Me₆tren are much lower than those for tren, due to the bulky Me substituents. The values of the constants can be correlated with the ability of the individual metal ions to adopt coordination number 5. This appears to be easier for Cu²⁺ and Co²⁺ than for Cd²⁺ and Zn²⁺ and is very difficult for Ni²⁺. The 1:1 complexes [ML(H₂O)]²⁺ are monoprotonic acids whose pK_s values are similar or lower than those of the corresponding aquametal ions. The X-ray crystal structure of the copper(II) complex [Cu(SO₄)(Me₆tren)] · 8H₂O reveals pentacoordination at the central ion. The UV/VIS spectra of the aqueous solutions of the Co²⁺, Ni²⁺, and Cu²⁺ 1:1 complexes confirm that the same coordination number is present also in these complexes.     

Complexation of metal ions with double-armed diazadithia lariat ether carrying anthracene moieties in acetonitrile–dioxane

A new 14-membered crown ether with nitrogen–sulfur donor atom carrying two anthryl groups was designed and synthesized by the reaction of the corresponding macrocyclic compound and 9-(chloromethyl) anthracene. The influence of metal cations such as Al³⁺, Zn²⁺, Fe²⁺, Fe³⁺, Co²⁺, Ni²⁺, Mn²⁺, Cu²⁺, Cd²⁺, Hg²⁺ and Pb²⁺ on the spectroscopic properties of the ligand was investigated in acetonitrile–dioxane solution (1/1) by means of absorption and emission spectrometry. The results of spectrophotometric titration experiments disclosed the complexation stoichiometry and complex stability constant of the novel ligand with Fe²⁺, Fe³⁺, Al³⁺, Cd²⁺, Cu²⁺, Zn²⁺, Pb²⁺ and Hg²⁺ cations. Absorption spectra show isobestic points in the spectrophotometric titration of these cations. The presence of excess of Al³⁺, Zn²⁺, Fe²⁺, Fe³⁺, Co²⁺, Ni²⁺, Mn²⁺, Cu²⁺, Cd²⁺, Hg²⁺ and Pb²⁺ cations caused an enhancement of anthryl fluorescence. Especially, the enhancement in case of the interaction of Hg²⁺ and Al³⁺ cations with the ligand was pronounced.     

Nature et stabilité des complexes métalliques de cryptands dinucléants en solution. I. Polyazapolyoxa macrotricycle cylindrique et monocycle constitutif

Nature and Stability of Some Metallic Complexes of Dinucleating Cryptands in Solution. I. A Polyazapolyoxa Cylindrical Macrotricycle and its Monocyclic Subunit pH-metry and UV spectrophotometry were used to study the complexing properties of the cylindrical macrotricycle, 1,7,13,19-tetraaza-4,16-dioxa-10,22,27,32-tetraoxatricyclo[17.5.5.5]tetratriacontane ( 1 ) and of its constitutive monocyclic subunit, 1,7-diaza-4,10-dioxacyclododecane ( 2 ) with some transition and heavy metal cations (Cu²⁺, Co²⁺, Ni²⁺, Zn²⁺, Cd²⁺, Pb²⁺, Ag⁺), in aqueous medium 0.1M Et₄NClO₄, at 25°. The protonation constants of the ligands as well as the nature and the stabilities of the complexes formed in the pH-regions studied were determined. The tricycle 1 only formed dinuclear M₂L complexes with Cu²⁺, Zn²⁺, and Ag⁺, accompanied in the latter case by a protonated mononuclear MLH species, and with Cu²⁺ and Zn²⁺ at high pH-values by dinuclear hydroxo complexes. Only mononuclear complexes were evidenced with the other cations, ML being accompanied either by protonated or hydroxy mononuclear species. The mononuclear complexes of 1 , when they existed, were more stable than the corresponding complexes of 2 , except for cobalt which formed complexes of comparable stability with both ligands. In the other cases (Cd²⁺, Pb²⁺, Ag⁺), the stability differences between the complexes of 1 and 2 increased with the size of the cation.     

On the different coordination of Ni, Zn and Cd cations in their model Schiff base complexes - Single crystal X-ray and solid state NMR studies

Three model metal complexes: Ni(NCS)L, Zn₂(NCS)₂L₂ and Cd₂(NCS)₂L₂, consisting of the SCN⁻ anion(s) and L = 2-[(2-dimethylaminoethylimino)-methyl]-phenolate, have been studied by X-ray diffraction and solid state NMR spectroscopy. The metal cations in these complexes have different coordination modes: Ni²⁺ is almost square-planar, the Zn²⁺ cation in Zn₂(NCS)₂L₂ is pentacoordinated, whereas Cd²⁺ is penta- and hexacoordinated in [Cd₂(NCS)₂L₂]. The different coordination of the metal cations influences the chemical shifts of the metal cations and also the nitrogen atoms. These chemical shifts can be correlated with the M-N and M-O bond lengths (M = Ni²⁺, Zn²⁺, Cd²⁺).     

Solvent donor and acceptor properties of pyridine

Polarographic and cyclovoltammetric measurements on the perchlorates of Li⁺, Na⁺, K⁺, Rb⁺, Cs⁺, Tl⁺, Ba²⁺ and Ni²⁺ as well as on the trifluoromethane sulfonates of Zn²⁺, Cd²⁺, Pb²⁺, Cu²⁺, Cu⁺, Mn²⁺ and Co²⁺ were carried out. The data allowed the evaluation of the different donor behavior of pyridine towards hard, border line and soft cations. The conclusions drawn from electrochemical investigations were supported by Gibbs energies of transfer for cations, which were derived from both electrochemical measurements based on the bis(biphenyl)chromium assumption and from solubility studies based on the tetraphenylarsonium tetraphenylborate assumption. The acceptor properties of pyridine were obtained from the solvatochromic dyes bis(cyano)bis(1,10-phenanthroline)iron(II) and bis(cyano)bis(3,4,7,8-tetramethyl-1,10-phenanthroline)iron(II) and the results were compared with the acceptor number and the E _T -value.     

Nanometer-sized alumina coated with chromotropic acid as solid phase metal extractant from environmental samples and determination by inductively coupled plasma atomic emission spectrometry

A method for solid phase extraction of trace metals such as Cd²⁺, Cr⁶⁺, Cu²⁺, Fe³⁺, Mn²⁺, Ni²⁺, Pb²⁺ and Zn²⁺ using nanometer-sized alumina coated with chromotropic acid prior to determination by inductively coupled plasma atomic emission spectrometry (ICP-AES) has been developed. Various influencing parameters on the separation and preconcentration of trace metals, pH, flow rate, sample volume, amount of adsorbent, concentration of eluent and sorption kinetics have been studied. The detection limits for Cd²⁺, Cr⁶⁺, Cu²⁺, Fe³⁺, Mn²⁺, Ni²⁺, Pb²⁺ and Zn²⁺ were found to be 0.14, 0.62, 0.22, 0.54, 0.27, 0.28, 0.53 and 0.38 ng ml^− 1, respectively. The adsorption capacity of the solid phase adsorption material is 10.3, 11.3, 14.5, 16.4, 15.1, 11.7, 15.4 and 16.8 mg g^− 1 for Cd²⁺, Cr⁶⁺, Cu²⁺, Fe³⁺, Mn²⁺, Ni^2+, Pb²⁺ and Zn²⁺, respectively. The preconcentration factor was obtained in the range of 50-100 for all studied metal ions. Coexisting ions over a high concentration range have not shown any significant effects on the determination of aforesaid metal ions. The accuracy of the proposed method was tested by standard reference materials (NIST 1643e: water, NIST 1573a: tomato leaves and NIST 1568a rice flour) and natural waters and the results obtained were in good agreement with the certified values.     

New fluorescent chemosensor for Zn2+ ions on the basis of 3,3′-bis(dipyrrolylmethene)

Luminescence study of the reaction of 3,3′-methanediylbis(2,4,7,8,9-pentamethyldipyrrolylmethene) (H₂L) with a number of metal salts showed that this compound is an efficient fluorescent chemosensor for Zn²⁺ ions in organic solvents. The selectivity and sensitivity of H2L were estimated in various solvents in the presence of other metal cations (Na⁺, Mg²⁺, Co²⁺, Ni²⁺, Cu²⁺, Cd²⁺, Hg²⁺, Pb²⁺).     

Spectroscopic Characterization of <Emphasis Type="Italic">N,N-bis</Emphasis>(2-{[(2,2-Dimethyl-1,3-Dioxolan-4-yl)Methyl]Amino}Ethyl) N′,N′-Dihydroxyethanediimidamide and Its Complexes

A new dioxime ligand, N,N-bis(2-{[(2,2-dimethyl-1,3-dioxolan-4-yl)methyl]amino} ethyl)N′,N′-dihydroxyethanediimidamide (H₂L), and its mononuclear complexes with Co²⁺, Ni²⁺, Cu²⁺, Zn²⁺ and Cd²⁺ are synthesized. H₂L forms transition metal complexes [Co(LH)₂(H₂O)₂] and [M(LH)₂] (M = Ni²⁺, Cu²⁺) with a metal : ligand ratio of 1 : 2. Complexes [M(H₂L)(Cl)₂] (Zn²⁺, Cd²⁺) have a metal : ligand ratio of 1 : 1. The mononuclear Co²⁺, Ni²⁺, and Cu²⁺ complexes indicate that the metal ions coordinate ligand through its two N atoms, as the most of dioximes. In the Co²⁺ complex, two water molecules and in the Zn²⁺ and Cd²⁺ complexes two chloride ions are also coordinated to the metal ion. The structures of these compounds are identified by elemental analyses, IR, ¹H and ¹³C NMR, electronic spectra, magnetic susceptibility measurements, conductivity, and thermogravimetric analysis.__________From Koordinatsionnaya Khimiya, Vol. 31, No. 7, 2005, pp. 540–544.Original English Text Copyright © 2005 by Canpolat, Kaya.The text was submitted by the authors in English.     

The Synthesis of New Triazole Ligands and Determination of Complex Stability Constants with Transition Metal Cations in Aqueous Media

Six new triazole compounds were synthesized. These compounds containing the substituted benzylidenamino group were obtained by reaction of 3-(pyridine-4-yl)-5-p-tolyl-4-amino-4H-l,2,4-triazole 1 with the corresponding aldehyde. The reduced forms were prepared with NaBH₄ in methanol. The structures of the compounds were determined by IR, ¹H NMR, and ¹³C NMR spectral data, and their interaction with cations such as Li⁺, Na⁺, K⁺, Rb⁺, Cs⁺, Ba²⁺, Sr²⁺, Ca²⁺, Cu²⁺, Cr³⁺, Co²⁺, Ni²⁺, Zn²⁺, Cd²⁺, Pb²⁺ and Ag⁺ were investigated by using UV-visible spectrophotometry. Of the tested metal cations, Cu²⁺, Cr³⁺, Co²⁺, Ni²⁺, Zn²⁺, Cd²⁺, Pb²⁺ and Ag⁺ complexed with the ligands. The complex stability constants (log ₁₀ K) were measured in slightly acidic aqueous media at 25.0±0.1 °C. These stability constants were determined by measuring the increase in solubility of the nearly insoluble ligand molecule due to complex formation with a soluble cation, and this method is discussed. It was found that the position of chlorine atoms on the benzene ring strongly affects the complexation of Cu²⁺ ion with these ligands.     

Complexation of metal ions with the novel diazadithia crown ether carrying two anthryl pendants in acetonitrile–tetrahydrofuran

A new crown ether carrying two anthryl groups with nitrogen–sulfur donor atom was designed and synthesized by the reaction of the corresponding macrocyclic compound and 9-chloromethyl anthracene. The influence of metal cations such as Al³⁺, Zn²⁺, Fe²⁺, Fe³⁺, Co²⁺, Ni²⁺, Mn²⁺, Cu²⁺, Cd²⁺, Hg²⁺ and Pb²⁺ on the spectroscopic properties of the ligand was investigated in acetonitrile–tetrahydofuran solution (1/1) by means of absorption and emission spectrometry. Absorption spectra show isosbestic points in the spectrophotometric titration of Fe²⁺, Fe³⁺, Al³⁺, Cu²⁺ and Hg²⁺. The results of spectrophotometric titration experiments disclosed the complexation stoichiometry and complex stability constant of the novel ligand with Fe²⁺, Fe³⁺, Al³⁺, Cu²⁺and Hg²⁺cations. The presence of excess amounts of Al³⁺, Zn²⁺, Fe²⁺, Fe³⁺, Co²⁺, Ni²⁺, Mn²⁺, Cu²⁺, Cd²⁺, Hg²⁺ and Pb²⁺ cations caused an enhancement of anthryl fluorescence. The ligand showed good sensitivity for Zn²⁺ with respect to other metal cations with linear range and detection limit of 1.4 × 10^?7 to 4.1 × 10^?6 M and 1.0 × 10^?8 M respectively.     

Synthesis of a Dithiocarbamate Chelate Resin and Its Oxidized form and Their Adsorption Properties for Heavy Metal Ions

A series of macroporous dithiocarbamate chelate resins, III and V, and an oxidized resin, VI, with high adsorption capacity were prepared. The influence of various reaction conditions of amination, dithiocarboxylation, and oxidation were examined. The structure and the conversion of functional groups of resins were confirmed by IR spectra and elemental analysis. The adsorption capacities of Resin II for Hg²⁺, Cu²⁺, Zn²⁺, and Cd²⁺ are 4.40, 2.44, 1.77, and 1.36 mmol/g, respectively. The adsorption capacities of Resins V and VI for Cu²⁺. Zn²⁺, Ni²⁺, Co³⁺, Ag⁺, Hg²⁺, Cd²⁺, Pb²⁺, and Au³⁺ are 4.07–0.51 and 3.81–0.59 meq ion/g, respectively. The adsorption rate and the influence of pH on the adsorption percentage of the resins for metal ions were examined. Noble metal, transitional metal, and heavy metal ions can be quantitatively adsorbed by the resins. The adsorbed Cu²⁺, Pb²⁺, Cd²⁺, Co³⁺, and Ni²⁺ can be quantitatively eluted with 5N HNO₃, and the presence of large amounts of Ca²⁺, Mg²⁺, Fe³⁺, and Al³⁺ did not interfere.     

Synthesis and applications of (5-substituted benzimidazolo)-benzo-15-crown-5 and 4,4′-bis-benzimidazolo-dibenzo-15-crown-5 for the colorimetric detection of Au3+

In the present work, we have reported the synthesis of benzimidazoles functionalized crown ether derivatives of 4-formyl benzo-15-crown-5/4,4′-diformyl dibenzo-15-crown-5 and substituted diamine pyridine using sulfamic acid as a catalyst in DMSO. These molecules are used for the colorimetric determination of Au³⁺ selectively among other metal cations such as Fe²⁺, Co²⁺, Ni²⁺, Cu²⁺, Zn²⁺, Cd²⁺, Pb²⁺, Hg²⁺, Au³⁺ and Ag⁺ ions_.     

Extraction and preconcentration capacity of bifunctionalized diamine-thiol polysiloxane immobilized ligand system towards some divalent cations

Porous solid bi-organofunctionalized diamine-thiol polysiloxane immobilized ligand system of the general formula P-(CH₂)₃- X, (where P represents [Si-O]_n siloxane network and X represents a mixture of diamine; -NH(CH)₂NH₂ and thiol; -SH functional groups) has been prepared by hydrolytic polycondensation of TEOS with a mixture of 3-mercaptopropyltrimethoxysilane and 3- (2-aminoethylimino)propyltrimethoxysilane agents. The ligand system was evaluated for extraction and preconcentartion of a series of divalent metal ions from aqueous solutions including: Co²⁺, Ni²⁺, Cu²⁺, Zn²⁺, Cd²⁺ and Pb²⁺. Both batch and dynamic methods were used to examine maximum sorption capacity. The maximum binding capacity followed the sequence; Cu²⁺ > Pb²⁺ > Cd²⁺ > Ni²⁺ > Zn²⁺ > Co²⁺ at pH 5.5. Measurement of variation of sorption of metal ions with temperature yielded negative values of ΔG° and positive values of ΔS° and ΔH° indicating a spontaneous and endothermic process of binding metal ions to the ligand system.     

Transition Metal Ion-binding Properties of a 14-Membered N2O2S2- Macrobicyclic Ligand

The selective liquid–liquid extraction of various transition metal cations from the aqueous phase to the organic phase was carried out using a 14-membered N₂O₂S₂-macrobicycle. Metal picrates such as Pb²⁺, Co²⁺, Zn²⁺, Ni²⁺,Cu²⁺ and Cd²⁺ were used in this extraction studies. It was found that the ligand showed moderate selectivity towards Pb²⁺ only among the other metals. The extraction constant (log K _ex) was determined to be 13.8 for Pb²⁺ complex.     

Vibrational and scanning electron microscopy study of the mordenite modified by Mn, Co, Ni, Cu, Zn and Cd

The mordenite samples loaded with divalent nitrates of Mn, Co, Ni, Cu, Zn and Cd were investigated using FTIR and scanning electron microscopy (SEM) methods. It was found from FTIR spectra that in 3000-4000 cm⁻¹ region of mordenite samples with similar water concentration ions, Mn²⁺, Co²⁺, Cu²⁺, and Zn²⁺ tend to break hydrogen bonds formed between water molecules and zeolite framework, whereas Ni²⁺ and Cd²⁺ accommodate to hydrogen bonds. From SEM results it was concluded, that ions Mn²⁺, Co²⁺, Zn²⁺ form innersphere complexes with oxygens from Brönsted acid sites, whereas Ni²⁺ and Cd²⁺ associate with Brönsted acid sites without exchange of protons.     

Parameters of cation “hardness” and “softness” and application thereof for calculation of extraction constants

Analysis of published data was performed on the basis of solvation energies of a number of “transition” and “soft” cations. A dependence of the solvation energy of cations on the donor and acceptor numbers of the solvent was derived. Donor and acceptor ability parameters of Mn²⁺, Co²⁺, Ni²⁺, Cu²⁺, Zn²⁺, Ag⁺, Cd²⁺, and Tl⁺ were calculated. The resultant parameters were used to calculate the extraction constants of the specified cations with di-2-ethylhexyl-phosphoric acid (DEHPA) solution in neutral solvents; the model represented has a good predictive power.