The solvent effect on the reaction constants of tert-butyl radical addition to 2-substituted allyl chlorides

The ρ values of free radical S_H2′ reactions have been determined in various solvents. The correlation of Hammett ρ with Taft's π* gives a W value of 0.70. The W value is a measure of susceptibility of the reaction constant to change in solvent polarity. However, the W value is 2.64 in the dissociation reactions of substituted benzoic acids. The free radical reactions are less susceptible to the solvent effect than ionic reactions and this could be rationalized in terms of the partial charge formed in the transition state of free radical reaction is less than that of heterolytic reaction. The ρ values in S_H2′ reactions might not reflect truly the partial charge separation at transition state, however, it might be a measure of the susceptibility of the reaction to the electronic effect of the substituents.     

An ab initio investigation into the SN2 reaction: Frontside attack versus backside attack in the reaction of F− with CH3F

The energy hypersurface for the attack of fluoride ion on methyl fluoride has been explored with ab initio LCAO-SCF calculations at a split-valence basis set level. Transition states for frontside and backside attack have been located. In addition to transition states, two possible F^–-CH₃F clusters have been identified. The transition state for the substitution of fluoride with retention of configuration is found to be 56 kcal/mol higher than the transition state for inversion of configuration. The transition state for hydride displacement with inversion is 62 kcal/mol above the transition state for fluoride substitution with inversion.     

Polyatomic ions in inductively coupled plasma–mass spectrometry: Part II: Origins of N2H and HxCO ions using experimental measurements combined with calculated energies and structures

Several polyatomic ions in inductively coupled plasma–mass spectrometry are studied experimentally and by computational methods. Novel calculations based on spin-restricted open shell second order perturbation theory (ZAPT2) and coupled cluster (CCSD(T)) theory are performed to determine the energies, structures and partition functions of the ions. These values are combined with experimental data to evaluate a dissociation constant and gas kinetic temperature (T_gas) value. In our opinion, the resulting T_gas value can sometimes be interpreted to deduce the location where the polyatomic ion of interest is generated. The dissociation of N₂H⁺ to N₂⁺ leads to a calculated T_gas of 4550 to 4900 K, depending on the computational data used. The COH⁺ to CO⁺ system yields a similar temperature, which is not surprising considering the similar energies and structures of COH⁺ and N₂H⁺. The dissociation of H₂CO⁺ to HCO⁺ leads to a much lower T_gas (< 1000 to 2000 K). Finally, the dissociation of H₂COH⁺ to HCOH⁺ generates a T_gas value between those from the other H_xCO⁺ ions studied here. All of these measured T_gas values correspond to formation of extra polyatomic ion in the interface or extraction region. The computations reveal the existence of isomers such as HCO⁺ and COH⁺, and H₂CO⁺ and HCOH⁺, which have virtually the same m/z values and need to be considered in the interpretation of results.     

Nuclear magnetic relaxation and ionic solvation of23Na+ and81Br− in aqueous mixtures of simple amides

Ion-solvent interactions of Na⁺ and Br^– in binary aqueous mixtures of formamide,N-methylformamide (NMF), andN,N-dimethylformamide (DMF) are studied by use of²³Na and⁸¹Br magnetic relaxation times, extrapolated to zero salt concentration. The relaxation times, which are controlled by quadrupolar interaction, have been measured over the complete mixture range and are compared with a simplified theoretical formula. It turned out that the²³Na⁺ relaxation in H₂O-formamide and H₂O-NMF mixtures is in excellent agreement with theoretical predictions, implying nonpreferential solvation of Na⁺ in these systems. Small deviations of experimental from theoretical results in H₂O+DMF possibly indicate weak selective hydration of the cation. In the case of the anionic nuclei⁸¹Br^–, deviations from the theoretical curve occur which are to be expected, especially for systems where hydrophobic effects play a role. On the other hand, it is demonstrated that these deviations can easily be explained within the electrostatic theory by differences in structural details of the anionic solvation sphere in the mixtures compared to the pure solvents.     

Variation of some microscopic properties with composition in 2-methoxyethanol and 1,2-ethanediol mixtures

Selected microscopic properties, namely E_T(30) polarity, Kamlet-Taft solvatochromic parameters and dissociation constant of picric acid, have been correlated with solvent composition in 2-methoxyethanol/1,2-ethanediol mixtures. Theoretical and semi-empirical equations which embody preferential solvation of the solute and show standard deviations lower than 0.01 for solvatochromic parameters and 0.03 for pK values have been proposed.     

The conflict between hole delocalisation and static plus dynamic polarisation in molecular cations: illustration on Mg n + clusters

In a filled band problem, like an alkaline earth or a rare gas cluster, the positive ion is stabilised by both the hole delocalisation and by polarisation effects. The variational monoelectronic pictures take into account the first factor and the static polarisation, disregarding the dynamic or instantaneous polarisation, which is a correlation effect. This unbalance of SCF treatments underestimates the binding energy and unduly favors the structures in which the hole is concentrated on an atom surrounded by numerous neighbors. Taking into account the dynamic polarisation through CI or effective VB approaches restores the relative stability of structures where the hole is spread over a large number of atoms, as illustrated on the Mg ₄ ⁺ problem. This remark is shown to have general implications for covalent molecules.Dedicated to Professor J. Koutecký on the occasion of his 65th birthday     

Study of Complex Formation between N-Phenylaza-15-Crown-5 with Mg2+, Ca2+, Ag+ and Cd2+ Metal Cations in Some Binary Mixed Aqueous and Non-aqueous Solvents using the Conductometric Method

The complexation reactions between Mg²⁺, Ca²⁺, Ag⁺ and Cd²⁺ metal cations with N-phenylaza-15-crown-5 (Ph-N15C5) were studied in acetonitrile (AN)–methanol (MeOH), methanol (MeOH)–water (H₂O) and propanol (PrOH)–water (H₂O) binary mixtures at different temperatures using the conductometric method. The conductance data show that the stochiometry of all of the complexes with Mg²⁺, Ca²⁺, Ag⁺ and Cd²⁺ cations is 1:1 (L:M). The stability of the complexes is sensitive to the solvent composition and a non-linear behaviour was observed for variation of log K _f of the complexes versus the composition of the binary mixed solvents. The selectivity order of Ph-N15C5 for the metal cations in neat MeOH is Ag⁺>Cd²⁺>Ca²⁺>Mg²⁺, but in the case of neat AN is Ca²⁺>Cd²⁺>Mg²⁺>Ag⁺. The values of thermodynamic parameters (ΔH _c ^o , ΔS _c ^o ) for formation of Ph-N15C5–Mg²⁺, Ph-N15C5–Ca²⁺, Ph-N15C5–Ag⁺ and Ph-N15C5–Cd²⁺ complexes were obtained from temperature dependence of stability constants and the results show that the thermodynamics of complexation reactions is affected by the nature and composition of the mixed solvents.     

Characterization and catalytic behavior of La2 - x (Sr, Th)xCuO4 ± λ in reaction NO+CO

Two mixed oxide systems La₂-_xSr_xCuO_{4± λ} (0.0⩽x⩽1. 0) and La_2-xTh_xCuO_{4± λ} (O. O⩽x⩽ 0.4) with K₂NiF₄ structure were prepared by varyingx values. Their crystal structures were studied by means of XRD and IR spectra. The average valence of Cu ion at B site, nonstoichiometric oxygen (λ) and the chemical composition in the bulk and on the surface of the catalysts were measured by means of chemical analysis and XPS. The catalytic behavior in reaction CO+NO was investigated under the regular change of average valence of Cu ion at B site and nonstoichiometric oxygen (λ). Meanwhile, the adsorption and activation of the small molecules NO and the mixture of NO+CO over the mixed oxide catalysts were studied by means of MS-TPD. The catalytic mechanism of reaction NO+CO over these oxide catalysts were proposed; and it has been found that, at lower temperatures the activation of NO is the rate determining step and the catalytic activity is related to the lower valent metallic ion and its concentration, while at higher temperatures the adsorption of NO is the rate determining step and the catalytic activity is related to the oxygen vacancy and its concentration. Project supported by the National Natural Science Foundation of China.     

Mechanistic aspects of the Wolff-Kishner reaction. V. The cation effect on the reaction of benzophenone hydrazone in butyl carbitol and decyl alcohol

The rate of the Wolff-Kishner reaction of benzophenone hydrazone in butyl carbitol increases as the cation of the alkoxide base is varied in the order K>Na>Li>Mg. The replacement of butyl carbitol by 1-decanol also accelerates the reaction, and an additional increase is caused by the presence of crown ether. On the basis of changes in the activation parameters, it is concluded that the reactivity of the hydrazone anion increases as the contact ion pair becomes more fully solvated and dissociated.     

OH−-induced β-elimination reactions with 1-(2-Xethyl)-4-nitrobenzene substrates in solvent mixture H2O/CH3CN and H2O/DMSO: Reactivity and mechanism

The behaviour of 1-(2-bromoethyl) 4-nitrobenzene (1), N,N,N-triethyl-2-(4-nitrophenyl)ethanaminium bromide (2) and N,N-diethyl-N-[2-(4-nitrophenyl)ethyl]octan-1-aminium bromide (3) in the OH⁻-induced elimination reactions with formation of 1-nitro-4-vinylbenzene in mixtures of DMSO/H₂O or CH₃CN/H₂O has been investigated. With all three substrates an increase in dipolar aprotic solvent content implies a limited increase of the second-order rate constant k _OH up to ≅605, and then an exponential increase is observed. The variation of activation parameters ΔH ^# and dGS ^#, measured in DMSO/H₂O mixtures, is parallel for 1 and 2. This similar behaviour of 1 and 2 with respect to variation in solvent composition is evidence that it is not possible to use this technique of solvent effect for the mechanistic diagnosis of elimination reactions.     

Effect of intramolecular interaction between polar and polarizable bonds on13C shielding constants in different conformations of 2-methoxy- and 2-vinyloxynaphthalene molecules: Anab initio study

Shielding constants of¹³C nuclei calculated for different conformations of 2-methoxynaphthalene and 2-vinyloxynaphthalene molecules by the GIAOab initio method in the D95^** basis set indicate a strong shielding effect of the intramolecular interaction between the polar O−C bond of the substituent and the polarizable π-bond of the naphthyl moiety on the C atom incis-position. The results obtained are in agreement with the experimentally found trends of changes in the chemical shifts of¹³C nuclei and are in reasonable quantitative agreement with experimental data. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 6, pp. 1066–1069, June, 1999.     

Solutions of alkali soaps and water in fatty acids XI. Correlation between the acid sodium octanoate in the most water-rich part of the L2-phase and the acid soaps in two adjacent phases

The special nature of the outer-most water-rich region of theL ₂-phase in the ternary system sodium octanoate-octanoic acid-water is evidenced by its somewhat turbid appearance and by the character of its equilibria with adjacent phases. The phase contains aggregated acid sodium octanoate which is dispersed in a very dilute aqueous solution of sodium octanoate. The acid octanoate has the composition 1 NaC₈2 HC₈x H₂O and is composed of closely packed amphiphilic units, all with the polar groups in the same direction. This acid soap obviously forms double-layered aggregates with the lipophilic hydrocarbon chains pointing inwards and the polar groups pointing outwards towards the surrounding bulk-water. The phase is formed when octanoic acid is added to theL ₁-phase of the system just above the l.a.c.; in this aqueous solution, the acid reacts with dissolved acid octanoate 1 NaC₈1 HC₈x H₂O and that results in the formation of the slightly soluble acid soap 1 NaC₈ 2 HC₈x H₂O that separates as a new phase, the turbidL ₂ phase. On further addition of octanoic acid, the content of the mentioned acid soap increases until the solution phase is transformed into a liquid crystalline lamellarD-phase with the same acid soap composition. This formation of acid soap 1 NaA2 HA on addition of fatty acid to the dilute soap solution just above the l.a.c., has been known for a long time to occur in various systems containing a long-chain sodium soap. However, at suitably low temperatures, the reaction in these systems does not result in separation of the acid soap in the liquid crystalline, but in the solid crystalline state.     

Equilibrium isotope effects in aqueous systems. IV. The vapor pressures of NaBr,Nal, KF,Na2SO4, and CaCl2 solutions in H2O and D2O (O to 90°C). Vapor pressures of Na2SO4·10H2O, ·10D2O and CaCl2·2H2O, ·2D2O

Solvent vapor pressure isotope effects have been measured in HOH/DOD between approximately 0 and 90°C on the following electrolyte solutions: NaBr (2, 5, 7, and 9m), NaI (4, 6, 8, and 10m), KF (3, 6, 9, and 12m), Na₂SO₄ (2m and saturated solutions, and hydrated cyrstal), and CaCl₂ (3, 5.5, 8, and 10m, and hydrated crystal). Values of the isotope effects on the various excess thermodynamic properties of solution, including the osmotic and activity coefficients and the excess free energies, enthalpies, and entropies, have been extracted from least-square expressions which fit the VPIE over the entire concentration and temperature range. The results are compared with those obtained for alkali metal chloride solutions (I, II) and literature data where possible. They are discussed briefly in terms of solution structure.     

Influence of alkali and alkaline earth ions on the O -alkylation of the lower rim phenolic-OH groups of p-tert -butyl-calix[4]arene to result in amide-pendants: Template action of K+ and the structure of K+ bound tetra-amide derivative crystallized with a p-tert -butyl-calix[4]arene anion

Role of alkali and alkaline earth ions on the formation of calix[4]arene-amide derivatives through O-alkylation of the lower rim phenolic-OH groups in general and template action of K⁺ in particular have been explored. Na⁺ and K⁺ ions among alkali, and Ca²⁺ and Sr²⁺ ions among alkaline earth have shown tetra-amide derivatives bound to metal ion species. Among all these, potassium salts act as template and yields a K⁺ bound tetra-amide derivative where the charge is counter balanced by a calix[4] arene-monoanion and the product is crystallographically characterized. Change in the amide precursor used in these O-alkylation reactions has no effect on the type of the amide derivative formed. Also demonstrated is a direct one-step reaction for the preparation of 1,3-di-amide derivative in high yield and low reaction period using CsHCO₃.     

A review on enzyme and ultrasound: A controversial but fruitful relationship

A critical review on the effect of ultrasound (US) on enzymes and their biocatalytic action is presented here. Discussion on the information users of US acquire before utilizing the different devices, and the importance they give to US frequency is constant along the review. The authors have gone into the different areas in which the US–enzyme binomial has been applied. The lack of enough information on the US–enzyme-working conditions under which each piece of research has been developed, and the necessity to provide complete information on the data and metadata to give enough light on each piece of research (and thus on the potential comparison of results from different studies) are critically exposed. With this aim, the study has been divided into the positive effect of US on enzymes to favor the production of metabolites, polymers or proteins; and the degradation, inhibition or activation of the biocatalyst under US application. Also the effect of US on enzyme production and the main fields of application of the US–enzyme binomial are discussed.     

Interactions of DNA with graphene and sensing applications of graphene field-effect transistor devices: A review

Graphene field-effect transistors (GFET) have emerged as powerful detection platforms enabled by the advent of chemical vapor deposition (CVD) production of the unique atomically thin 2D material on a large scale. DNA aptamers, short target-specific oligonucleotides, are excellent sensor moieties for GFETs due to their strong affinity to graphene, relatively short chain-length, selectivity, and a high degree of analyte variability. However, the interaction between DNA and graphene is not fully understood, leading to questions about the structure of surface-bound DNA, including the morphology of DNA nanostructures and the nature of the electronic response seen from analyte binding. This review critically evaluates recent insights into the nature of the DNA graphene interaction and its affect on sensor viability for DNA, small molecules, and proteins with respect to previously established sensing methods. We first discuss the sorption of DNA to graphene to introduce the interactions and forces acting in DNA based GFET devices and how these forces can potentially affect the performance of increasingly popular DNA aptamers and even future DNA nanostructures as sensor substrates. Next, we discuss the novel use of GFETs to detect DNA and the underlying electronic phenomena that are typically used as benchmarks for characterizing the analyte response of these devices. Finally, we address the use of DNA aptamers to increase the selectivity of GFET sensors for small molecules and proteins and compare them with other, state of the art, detection methods.     

Speciation and detection of arsenic in aqueous samples: A review of recent progress in non-atomic spectrometric methods

Inorganic arsenic (As) displays extreme toxicity and is a class A human carcinogen. It is of interest to both analytical chemists and environmental scientists. Facile and sensitive determination of As and knowledge of the speciation of forms of As in aqueous samples are vitally important. Nearly every nation has relevant official regulations on permissible limits of drinking water As content. The size of the literature on As is therefore formidable. The heart of this review consists of two tables: one is a compilation of principal official documents and major review articles, including the toxicology and chemistry of As. This includes comprehensive official compendia on As speciation, sample treatment, recommended procedures for the determination of As in specific sample matrices with specific analytical instrument(s), procedures for multi-element (including As) speciation and analysis, and prior comprehensive reviews on arsenic analysis. The second table focuses on the recent literature (2005–2013, the coverage for 2013 is incomplete) on As measurement in aqueous matrices. Recent As speciation and analysis methods based on spectrometric and electrochemical methods, inductively coupled plasma-mass spectrometry, neutron activation analysis and biosensors are summarized. We have deliberately excluded atomic optical spectrometric techniques (atomic absorption, atomic fluorescence, inductively coupled plasma-optical emission spectrometry) not because they are not important (in fact the majority of arsenic determinations are possibly carried out by one of these techniques) but because these methods are sufficiently mature and little meaningful innovation has been made beyond what is in the officially prescribed compendia (which are included) and recent reviews are available.