Copolymers dispersions designed to shaping of ceramic materials

Journal of Thermal Analysis and Calorimetry - To study the effect of ionic liquids (ILs) of the microstructure on the surface of the coal, four ILs ([Emim][BF4], [Bmim][BF4], [Bmim][NO3], and...     

嵌段共聚物L64在1-丁基-3-甲基咪唑四氟硼酸盐离子液体中形成的层状液晶

利用偏光显微镜(POM)、小角X射线散射(SAXS)及傅里叶变换红外(FTIR)光谱技术研究了嵌段共聚物PluronicL64(PEO13PPO30PEO13)(PEO:聚氧乙烯;PPO:聚氧丙烯)在室温离子液体1-丁基-3-甲基咪唑四氟硼酸盐[Bmim][BF4]中的聚集行为.绘制了L64/[Bmim][BF4]体系的相图,当L64浓度介于40%-65%(w,质量分数)之间时,L64可与[Bmim][BF4]形成层状液晶.SAXS结果表明,液晶层间距随L64浓度的增加而降低.温度对液晶微结构影响较大,液晶层间距随温度的升高而增大,极性头截面积则减小.并且,在一定温度范围内,升温可使体系的有序性增强.但是,随温度的进一步升高,[Bmim][BF4]与PEO链段之间的氢键被破坏,双折射现象消失,液晶有序性降低.此外,分析了层状液晶的形成机理,[Bmim][BF4]与L64分子间的氢键作用力、静电作用力以及疏溶剂力是液晶形成的驱动力.     

在离子液体中6-羟基-2(1H)喹啉酮的合成及反应性研究

6-羟基-2(1H)-喹啉酮是心血管和降压药物的重要中间体. 设计合成了一种在[Bmim]AlCl₄离子液体中合成6-羟基-2-(1H)-喹啉酮的新方法; 研究了离子液体中6-羟基-2(1H)-喹啉酮母体环上羰基、氨基和不饱和键部位的化学反应. 此法后处理简便, 收率高, 是一种环境友好的绿色化学合成技术.     

Microwave synthesis and inherent stabilization of metal nanoparticles in 1-methyl-3-(3-carboxyethyl)-imidazolium tetrafluoroborate

The synthesis of Co-NPs and Mn-NPs by microwave-induced decomposition of the metal carbonyls Co(2)(CO)(8) and Mn(2)(CO)(10), respectively, yields smaller and better separated particles in the functionalized IL 1-methyl-3-(3-carboxyethyl)-imidazolium tetrafluoroborate [EmimCO(2)H][BF(4)] (1.6 ± 0.3 nm and 4.3 ± 1.0 nm, respectively) than in the non-functionalized IL 1-n-butyl-3-methylimidazolium tetrafluoroborate [Bmim][BF(4)]. The particles are stable in the absence of capping ligands (surfactants) for more than six months although some variation in particle size could be observed by TEM.     

Direct electrochemistry of cytochrome c entrapped in agarose hydrogel in room temperature ionic liquids

Direct electrochemistry of cytochrome c (cyt-c) entrapped in agarose hydrogel on gold electrode (Au), edge plane pyrolytic graphite electrode (EPPGE) and glassy carbon electrode (GC) in two room temperature ionic liquids was investigated. The effects of the addition of N,N-dimethylformamide (DMF) in the agarose-cyt-c film, water concentration in ionic liquids and exterior metal ions on the electrochemical behavior of cyt-c were monitored, and electrocatalytic properties of cyt-c were also done. Results showed that a good quasi-reversible redox behavior of cyt-c could be found after adding DMF in agarose-cyt-c film, and peak shape would not change after continuously scanning for 50 cycles. In addition, a certain amount of water in hydrophilic ionic liquids is necessary to maintain electrochemical activities of cyt-c, electrochemical performance of cyt-c is the best when the water content is 5.2% and 5.8% for 1-butyl-3-methylimidazolium bromide ([Bmim][Br]) and 1-butyl-3-methylimidazolium tetrafluoroborate([Bmim][BF(4)]) respectively. However, electrochemical activities of cyt-c are inhibited by exterior metal ions. Interestingly, cyt-c entrapped in agarose hydrogel on EPPGE and GC could catalyze the electroreduction of trichloroacetic acid (TCA) and tert-butyl hydroperoxide (t-BuOOH) in [Bmim][BF(4)], but could not in [Bmim][Br]. Reasons for above-mentioned differences of electrochemical properties of cyt-c in different ionic liquids were preliminarily discussed.     

Organic Reactions in Ionic Liquids： Ionic Liquid-promoted Efficient Synthesis of Disubstituted and Trisubstituted Thioureas Derivatives

In ionic liquid [Bmim][BF4], a series of disubstituted and trisubstituted thiourea derivatives were synthesized from phenyl and butyl isothiocyanate with a variety of amine in excellent yield.     

Inhibition ability of ionic liquid [Bmim][NO3], [Bmim][BF4], and [Emim][BF4] on spontaneous coal combustion

Journal of Thermal Analysis and Calorimetry - From TG result, [Bmim][BF4] has the best inhibition ability of spontaneous coal combustion to delay the initial temperature, maximum temperature, and...     

Electrochemical probing of the photoreduction of molybdenum and tungsten Dawson-type polyoxometalates in molecular and ionic liquid media using water as an electron donor

The photochemistry of the Dawson-type [Bu(4)N](4)[S(2)Mo(18)O(62)] and [Bu(4)N](4)[S(2)W(18)O(62)] polyoxometalates in molecular solvents and [Bmim][BF(4)] and [Bmim][BF(6)] ionic liquids with water present as the electron donor is reported. Irradiation with UV (275-320 nm) or white (275-750 nm) light leads to reduction of the [S(2)Mo(18)O(62)](4-) anion and concomitant oxidation of water to give dioxygen and protons in all media examined. Oxygen gas also is rapidly evolved when solid [Bu(4)N](4)[S(2)Mo(18)O(62)] in contact with water is irradiated with light. In contrast, photoreduction of [S(2)W(18)O(62)](4-) is observed only in "wet" ionic liquids. Reactants and products associated with the photochemical reactions were monitored by a range of electrochemical methods. Substantial shifts in reversible potentials combined with modified structure of water introduced by water-IL interactions are hypothesised to facilitate photooxidation of water in ionic liquid environments. Intriguingly, whilst the polyoxotungstate is preferable as a photosensitizer, the molybdenum analogue is superior for photooxidation of water to dioxygen.     

Poly(amide-6-b-ethylene oxide)/[Bmim][Tf_2N] blend membranes for carbon dioxide separation

Poly(amide-6-b-ethylene oxide)(Pebax1657)/1-butyl-3-methylimidazo-lium bis[trifluoromethyl)sulfonyl]-imide([Bmim][Tf_2N]) blend membranes with different [Bmim][Tf_2N] contents were prepared via solution casting and solvent evaporation method. The permeation properties of the blend membranes for CO_2, N_2,CH_4 and H_2 were studied, and the physical properties were characterized by differential scanning calorimeter(DSC) and X-ray diffraction(XRD). Results showed that [Bmim][Tf_2N] was dispersed as amorphous phase in the blend membranes, which caused the decrease of Tg(PE) and crystallinity(PA). With the addition of [Bmim][Tf_2N], the CO_2 permeability increased and reached up to approximately 286 Barrer at 40 wt%[Bmim][Tf_2N], which was nearly double that of pristine Pebax1657 membrane. The increase of CO_2 permeability may be attributed to high intrinsic permeability of [Bmim][Tf_2N], the increase of fractional free of volume(FFV) and plasticization effect. However, the CO_2 permeability reduced firstly when the [Bmim][Tf_2N]content was below 10 wt%, which may be due to that the small ions of [Bmim][Tf_2N] in the gap of polymer chain inhibited the flexibility of polymer chain; the interaction between Pebax1657 and [Bmim][Tf_2N]decreased the content of EO units available for CO_2 transport and led to a more compact structure. For Pebax1657/[Bmim][Tf_2N] blend membranes, the permeabilities of N_2, H2 and CH4decreased with the increase of feed pressure due to the hydrostatic pressure effect, while CO_2 permeability increased with the increase of feed pressure for that the CO_2-induced plasticization effect was stronger than hydrostatic pressure effect.     

新型离子液体介质中长链烯烃氢甲酰化反应

合成和表征了离子液体[Rmim][p-CH3C6H4SO3](R=CH3(CH2)n—, n=3, 7, 11, 15), 并以所合成的离子液体为反应介质, 考察了水溶性铑膦络合物HRh(CO)(TPPTS)3[TPPTS: P(m-C6H4SO3Na)3]对长链烯烃氢甲酰化反应的催化性能. 结果表明, 离子液体[Rmim][p-CH3C6H4SO3]中R基团链长的变化对催化活性具有重要的影响；而在相同离子液体中, 氢甲酰化反应活性随着烯烃链长的增加明显下降. 与文献报道中广泛使用的离子液体[Bmim]BF4、[Bmim]PF6相比, 该催化体系对长链烯烃氢甲酰化反应具有更好的活性和化学选择性, 在3.0 MPa, 100 ℃的条件下, 1-己烯氢甲酰化反应转化频率(TOF)高达2736 h-1. 反应完成后, 水溶性铑膦络合物能很好地溶解在离子液体中, 与有机物自动分层, 催化剂的循环使用易于实现.     

Doebner condensation in ionic liquids [Bmim]BF_4 and [Bpy]BF_4 to synthesize α,β-unsaturated carboxylic acid

Ionic liquids[Bmim]BF_4 and[Bpy]BF_4 were employed as environmentally benign media in Doebner condensation to synthesizeαβ-unsaturated carboxylic acid.The good results showed that[Bmim]BF_4 and[Bpy]BF_4 were efficient media for Doebner condensation,which could be recycled easily.The highest yields could reach 93%and 90%in[Bmim]BF_4 and[Bpy]BF_4,respectively.     

Catalytic performance of [Bmim][Co(CO)4] functional ionic liquids for preparation of 1,3-propanediol by coupling of hydroesterification-hydrogenation from ethylene oxide

In this paper, synthesis of 1,3-propanediol (1,3-PDO) through coupling of hydroesterification-hydrogenation from ethylene oxide (EO) catalyzed by 1-butyl-3-methylimidazolium cobalt tetracarbonyl [Bmim][Co(CO)₄] functional ionic liquid which was prepared by metathesis reaction between [Bmim]Cl and KCo(CO)₄ has been studied. The structure of [Bmim][Co(CO)₄] was characterized by FT-IR and ¹H NMR. Using [Bmim][Co(CO)₄] as catalyst and [Bmim]PF₆ as solvent, 1,3-PDO was prepared for the first time by coupling of hydroesterifaction of EO and hydrogenation of methyl 3-hydroxypropionate (3-HPM). The yield of 3-HPM can reach 90.8%, while the yield of 1,3-PDO up to 82.9%. The catalyst can be separated from the product mixture by extraction with deionized water and recycled several times without significant loss of catalytic efficiency. A possible reaction mechanism has also been proposed.     

Density and Viscosity for Binary Mixtures of the Ionic Liquid 1-Butyl-3-methylimidazolium Tetrafluoroborate with 2-Propanol,N,N-Dimethylacetamide and N,N-Dimethylformamide at 293.15–323.15 K: Experimental and PC-SAFT Modeling

Journal of Solution Chemistry - For three binary mixtures composed of ionic liquid 1-butyl-3-methylimidazolium tetrafluoroborate ([Bmim][BF4]) with 2-propanol, N,N?dimethylacetamide (DMA) and...     

Uranyl complexation by chloride ions. Formation of a tetrachlorouranium(VI) complex in room temperature ionic liquids [Bmim][Tf2N] and [MeBu3N][Tf2N

The tetrachlorouranium(VI) complex is formed in [Bmim][Tf2N] and [MeBu3N][Tf2N] from a uranium(VI) solution in the presence of a stoichiometric quantity of chloride ions. The [UVIO2Cl4]2- absorption and emission spectra show bands splitting in comparison with the [UVIO2]2+ spectra, as observed in the solid state, organic solvents, and chloroaluminate-based ionic liquids. The fluorescence lifetime of [UO2Cl4]2- in [MeBu3N][Tf2N] is 0.7 +/- 0.1 mus. The reduction potential of this complex is -1.44 and -1.8 V vs Ag/Ag+ respectively in [Bmim][Tf2N] and [MeBu3N][Tf2N] and does not depend on the chloride concentration. The mechanism proposed for the redox process is a monoelectronic reduction to form [UVO2Cl4]3-, followed by a chemical reaction. The tetrachlorouranium(V) complex seems more stable in [Bmim][Tf2N] than in [MeBu3N][Tf2N]. The electrochemical analysis put in evidence specific interactions of the ionic liquid cation with the uranium anionic species.     

Ionic liquid-promoted ring-closure reactions between 1,4-dihydroxyanthraquinone and diamines

The reaction of 1,4-Dihydroxyanthraquinone with diamines was carried out in the presence of CuCl(2), CuCl in the ionic liquid [Bmim]PF(6), [Bmim]BF(4) or [Bmim]Cl x CuCl.     

Solubility of selected dibasic carboxylic acids in water,in ionic liquid of [Bmim][BF4], and in aqueous [Bmim][BF4] solutions

The solubilities of three dibasic carboxylic acids (adipic acid, glutaric acid, and succinic acid) in water, in the ionic liquid of 1-butyl-3-methyl-imidazolim tetrafluoroborate ([Bmim][BF₄]), and in the aqueous [Bmim][BF₄] solutions have been measured by a solid-disapperance method. The binodal curve of water + [Bmim][BF₄] was also determined experimentally from solid–liquid–liquid coexistence temperature up to near the upper critical solution temperature. Experimental results showed that each acid-containing binary behaved as a simple eutectic system. The solid–liquid equilibrium (SLE) data were correlated with the NRTL model for each binary system. The NRTL model with these determined binary parameters predicted the solid-disappearance temperatures of the aqueous ternary mixtures containing [Bmim][BF₄] and the dibasic acids to within an average absolute deviation of 2.0%.     

Preparation of Nylon-6 Particles in Ionic Liquids

Summary: Utilizing the thermal stability of ionic liquid, micrometer-sized Nylon-6 particles were successfully prepared by hydrolytic polymerization of ε-caprolactam at high temperature with polyvinyl pyrrolidone as stabilizer in ionic liquids, 1-butyl-3-methyl imidazolium tetrafluoroborate, [Bmim][BF₄] and N,N-diethyl-N-methyl-N-(2-methoxyethyl)ammonium bis(trifluoro-methanesulfonyl)amide, [DEME][TFSA]. The obtained particles had a unique shape because Nylon-6 is a crystalline polymer. Viscosity-average molecular weights of Nylon-6 prepared in [Bmim][BF₄] and [DEME][TFSA] at 180 °C for 48 h were 4200 and 2200, respectively.     

Synthesis of TiO2 hollow spheres using binary ionic liquids as an electrocatalyst

Titanium dioxide (TiO₂ titania) hollow sphere was simply synthesized using various ionic liquids (ILs). The shape and size of TiO₂ particles were significantly different with the composition of ILs. This is mainly attributed to the interaction between organic solvent and IL at the interface leading to the formation of sphere. Among the binary ILs, [Bmim][BF₄] + [Omim][PF₆], [Bmim][BF₄] + [Omim][PF₆], and [Bmim][PF₆] + [Hmim][PF₆] were useful to prepare TiO₂ nanostructures with high surface area and anatase phase. Especially, [Bmim][BF₄] + [Omim][PF₆] was the most effective IL to synthesize an anatase TiO₂ hollow sphere.

     

Bimodal molecular weight distribution of poly(styrene‐co‐acrylonitrile) formed by conventional free‐radical copolymerization of acrylonitrile and styrene in room temperature ionic liquids

Conventional free‐radical copolymerization of acrylonitrile (AN) and styrene (St) was realized in room temperature ionic liquids (RTILs), 1‐butyl‐3‐methylimidazolium tetrafluoroborate ([Bmim][BF₄]) and 1‐butyl‐3‐methylimidazolium hexafluorophosphate ([Bmim][PF₆]), under mild conditions. The copolymerization in RTILs was more rapid than that in traditional solvent DMF. Poly(styrene‐co‐acrylonitrile) (SAN) prepared in RTILs had higher molecular weight than that prepared in DMF or by bulk copolymerization. SAN with bimodal molecular weight distribution (MWD) were obtained in most of the reaction conditions in [Bmim][BF₄] and some conditions in [Bmim][PF₆]. By the analysis of reaction phenomena and fluorescence behavior, the reason of the difference in MWD could be attributed to the difference of reaction system compatibility mainly caused by the immiscibility of macromolecule with RTIL. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 4420–4427, 2006     

Syntheses and reactivity studies of solvated dirhenium acetonitrile complexes

Fully and partially solvated triply-bonded [Re2]4+ complexes have been synthesized and their X-ray structures are described. A fully solvated dirhenium salt with BArf [tetrakis(3,5-bis(trifluoromethyl)phenyl)borate] as the counter anion [Re2(CH3CN)10][BArf]4 () has been characterized. The solubility of the complex in CH2Cl2 and THF in addition to CH3CN offers the possibility of improved reactivity. The structure of [Re2(micro-O)(CH3CN)10][BF4]4 () that possesses a linear [Re(III)-O-Re(III)]4+ unit is reported. Protonation reactions of cis-Re2Cl2(dppm)2(O2CCH3)2 and trans-Re2Cl4(dppm)2 with HBF4.Et2O in acetonitrile afforded cis and trans [Re2(dppm)2(CH3CN)6][BF4]4 ( and ), respectively. Prolonging the reaction time, however, does not lead to fully solvated complex [Re2(CH3CN)10][BF4]4. The neutral nitrogen donor ligands pynp (2-(2-pyridyl)-1,8-naphthyridine) and tznp (2-(2-thiazolyl)-1,8-naphthyridine) react readily with [Re2(CH3CN)10][BF4]4 to provide trans-[Re2(pynp)2(CH3CN)4][BF4]4 and trans-[Re2(tznp)2(CH3CN)4][BF4]4. The X-ray structures trans-[Re2(pynp)2(CH3CN)4][BF4]4 () and trans-[Re2(tznp)2(CH3CN)4][BF4]3[PF6] () have been determined.