Constant moving crack in a magnetoelectroelastic material under anti-plane shear loading

Analytical solutions for an anti-plane Griffith moving crack inside an infinite magnetoelectroelastic medium under the conditions of permeable crack faces are formulated using integral transform method. The far-field anti-plane mechanical shear and in-plane electrical and magnetic loadings are applied to the magnetoelectroelastic material. Expressions for stresses, electric displacements and magnetic inductions in the vicinity of the crack tip are derived. Field intensity factors for magnetoelectroelastic material are obtained. The stresses, electric displacements and magnetic inductions at the crack tip show inverse square root singularities. The moving speed of the crack have influence on the dynamic electric displacement intensity factor (DEDIF) and the dynamic magnetic induction intensity factor (DMIIF), while the dynamic stress intensity factor (DSIF) does not depend on the velocity of the moving crack. When the crack is moving at very lower or very higher speeds, the crack will propagate along its original plane; while in the range of M_c1 < M < M_c2, the propagation of the crack possibly brings about the branch phenomena in magnetoelectroelastic media.     

Analysis of dynamic growth of a tensile crack in an elastic-plastic material

The influence of inertia on the stress and deformation fields near the tip of a crack growing in an elastic-plastic material is studied. The material is characterized by the von Mises yield criterion and J₂ flow theory of plasticity. The crack grows steadily under plane strain conditions in the tensile opening mode. Features of the stress and deformation state at points near the moving crack tip are described for elastic-perfectly plastic response and for several crack propagation speeds. It is found that inertia has a significant effect on the elastic-plastic response of material particles near the crack tip, and that elastic unloading may occur behind the crack tip for higher speeds. The relationship between the applied crack driving force, represented by a remote stress intensity factor, and the crack tip speed is examined on the basis of a critical crack tip opening angle growth criterion. The calculated result is compared with dynamic fracture toughness versus crack speed data for a 4340 steel.     

Effect of residual surface stress on the fracture of nanoscale materials

The problem of a mode I crack in nanomaterials under a remote mechanical load is investigated. The effect of the residual surface stress on the crack surface is considered and the solutions to the crack opening displacement (COD) and the stress intensity factor (K_I) are obtained. The results show that the surface effect on the crack deformation and crack tip field are prominent at nanoscale. Moreover, COD and K_I are influenced by the residual surface stress not only on the surface near the crack tip region but also on the entire crack surface.     

Stress intensity factor and crack velocity relationship for polyester/TiO2 nanocomposites

The dynamic fracture behavior of polyester/TiO₂ nanocomposites has been characterized and compared with that of the matrix material. A relationship between the dynamic stress intensity factor,K _I and the crack tip velocity,å, has been established. Dynamic photoelasticity coupled with high-speed photography has been used to obtain crack tip velocities and dynamic stress fields around the propagating cracks. Birefringent coatings were used to conduct the photoelastic study due to the opaqueness of the nanocomposites. Single-edge notch tension and modified compact tension specimens were used to obtain a broad range of crack velocities. Fractographic analysis was conducted to understand the fracture process. The results showed that crack arrest toughness in nanocomposites was 60% greater than in the matrix material. Crack propagation velocities prior to branching in nanocomposites were found to be 50% greater than those in polyester.     

Analytical and experimental determination of dynamic impact stress intensity factor for 40 Cr steel

A linear elastic three-dimensional finite element analysis is made to analyze the near field stress behavior of an edge cracked rectangular bar simply supported and subjected to central impact at the back side of the crack. The material is made of 40 Cr steel. Determined numerically are the local time histories of the stress wave, displacement near load point, crack tip strain, and dynamic stress intensity factor K_(d)¹. The above quantities were also measured experimentally by performing impact tests; they agreed well with the analytical results and determine the load at fracture initiation and hence the critical dynamic stress intensity factor K_(d)^1c. The interaction effect between the loading bar and specimen appears to be negligible.     

Transient response of a cracked magnetoelectroelastic strip under anti-plane impact

The transient anti-plane problem of a magnetoelectroelastic strip containing a crack vertical to the boundary is considered. Singular integral equations for the impermeable crack are obtained by using Fourier and Laplace transforms. Numerical results show the effects of the relative loading parameters κ_D and κ_B, and the crack configuration on the dynamic fracture behavior. The results obtained indicate that for the impermeable crack, the electric and magnetic impacts have significant influences on the dynamic stress intensity factor and the dynamic energy density factor.     

Dynamic crack tip fields and dynamic crack propagation characteristics of anisotropic material

Based on mechanics of anisotropic material, the dynamic crack propagation problem of I/II mixed mode crack in an infinite anisotropic body is investigated. Expressions of dynamic stress intensity factors for modes I and II crack are obtained. Components of dynamic stress and dynamic displacements around the crack tip are derived. The strain energy density theory is used to predict the dynamic crack extension angle. The critical strain energy density is determined by the strength parameters of anisotropic materials. The obtained dynamic crack tip fields are unified and applicable to the analysis of the crack tip fields of anisotropic material, orthotropic material and isotropic material under dynamic or static load. The obtained results show Crack propagation characteristics are represented by the mechanical properties of anisotropic material, i.e., crack propagation velocity M and fiber direction α. In particular, the fiber direction α and the crack propagation velocity M give greater influence on the variations of the stress fields and displacement fields. Fracture angle is found to depend not only on the crack propagation but also on the anisotropic character of the material.     

Crack-tip dynamic isochromatics in the presence of small-scale yielding

A plasticity correction factor for the dynamic stress-intensity factor,K _I ^dyn , associated with a propagating crack tip in the presence of small-scale yielding, is derived from Kanninen's solution for a constant-velocity Yoffe crack with a Dugdale-strip yield zone. Distortions in the otherwise elastic isochromatics surrounding the constant-velocity crack tip are also studied by the use of this model. This plasticity correction factor is then used to evaluateK _I ^dyn from the dynamic isochromatics of a propagating crack in a 3.2-mm-thick polycarbonate wedge-loaded rectangular double-cantilever-beam specimen. The correctedK _I ^dyn is in good agreement with the corresponding values computed by a dynamic, elastic-plastic finite-element code executed in its generation mode.     

Edge-cracked stiffened panels analyzed by caustics

Externally bonded composite patches have been proven to be an effective method for repairing damaged aircraft structural components. They are ease in application and provide excellent in-service performance. The major function of a repair is to reduce the stress intensity factor at the crack tip. Calculation of stress intensity factor of a repaired crack has been performed by analytical and numerical methods. However, these methods are based on simplifying assumptions regarding material behavior and repair conditions. In the present paper an experimental determination of mode-I stress intensity factor (SIF), K_I, at the tip of an edge-crack or a V-notch reinforced with double bonded strips or with compression pre-stresses applied along the crack surfaces is undertaken by using the optical method of caustics. This method is simple in its application and has successfully been used for the solution of a host of crack problems of engineering importance.     

Numerical study of contact forces for crack closure analysis

Plasticity induced crack closure (PICC) has been widely studied using numerical models. Different numerical parameters can be considered to quantify the opening level, namely one based on the analysis of contact stresses at minimum load. A modified version of this parameter is proposed here, based on nodal contact forces instead of contact stresses. The predictions were found to be similar to those obtained from the contact status of 2nd node behind crack tip. The PICC_contact parameter was also found to be very consistent and adequate for parametric studies of the influence of different physical parameters. The contributions to the opening stress intensity factor of different points along crack flank were found to strongly decrease with distance to crack tip. The cumulative K_open between the crack tip and a distance of 0.1 mm was found to vary from 30% to 100%, increasing with stress ratio, R. Finally, a K solution was developed for punctual forces applied on crack flank and compared with a literature solution for infinite plates. A good agreement was found for plane strain state but significant differences of about 10% were found for plane stress state.     

A technique for studying interaction between a screw dislocation dipole or a concentrated load and a mode III crack crossing an interface

A method of potentially wide application is developed for deriving analytical expressions of the elastic interaction between a screw dislocation dipole or a concentrated force and a crack cutting perpendicularly across the interface of a bimaterial. The cross line composed of the interface and the crack is mapped into a line, and then the complex potentials are educed. The Muskhelishvili method is extended by creating a Plemelj function that matches the singularity of the real crack tips, and eliminates the pseudo tips’ singularity induced by the conformal mapping. The stress field is obtained after solving the Riemann–Hilbert boundary value problem. Based on the stress field expressions, crack tip stress intensity factors, dislocation dipole image forces and image torque are formulated. Numerical curves show that both the translation and rotation must be considered in the static equilibrium of the dipole system. The crack tip stress intensity factor induced by the dipole may rise or drop and the crack may attract or reject the dipole. These trends depend not only on the crack length, but also on the dipole location, the length and the angle of the dipole span. Generally, the horizontal image force exerted at the center of the dislocation dipole is much smaller than the vertical one. Whether the dipole subjected to clockwise torque or anticlockwise torque is determined by whether the Burgers vector of the crack-nearby dislocation of the dipole is positive or negative. A concentrated load induces no singularity to crack tip stress fields as the load is located at the crack line. However, as the concentrated force is not located on the crack line but approaches the crack tip, the nearby crack tip stress intensity factor K_IIIu increases steeply to infinity.     

On the higher order asymptotic analysis of a non-uniformly propagating dynamic crack along an arbitrary path

Transient mixed-mode elastodynamic crack growth along arbitrary smoothly varying paths is considered. Asymptotically, the crack tip stress field is square root singular with the angular variation of the singular term depending weakly on the instantaneous values of the crack tip speed and on the mode-I and mode-II stress intensity factors. However, for a material particle at a small distance away from the moving crack tip, the local stress field will depend not only on the instantaneous values of the crack tip speed and stress intensity factors, but also on the past history of these time dependent quantities. In addition, for cracks propagating along curved paths the stress field is also expected to depend on the nature of the curved crack path. Here, a representation of the crack tip fields in the form of an expansion about the crack tip is obtained in powers of radial distance from the tip. The higher order coefficients of this expansion are found to depend on the time derivative of crack tip speed, the time derivatives of the two stress intensity factors as well as on the instantaneous value of the local curvature of the crack path. It is also demonstrated that even if cracks follow a curved path dictated by the criterion K ₁₁ ^d =0, the stress field may still retain higher order asymmetric components related to non-zero local curvature of the crack path.     

Brittle fracture dynamics with arbitrary paths. II. Dynamic crack branching under general antiplane loading

The dynamic propagation of a bifurcated crack under antiplane loading is considered. The dependence of the stress intensity factor just after branching is given as a function of the stress intensity factor just before branching, the branching angle and the instantaneous velocity of the crack tip. The jump in the dynamic energy release rate due to the branching process is also computed. Similar to the single crack case, a growth criterion for a branched crack is applied. It is based on the equality between the energy flux into each propagating tip and the surface energy which is added as a result of this propagation. It is shown that the minimum speed of the initial single crack which allows branching is equal to 0.39c, where c is the shear wave speed. At the branching threshold, the corresponding bifurcated cracks start their propagation at a vanishing speed with a branching angle of approximately 40°.     

三点弯曲试样动态应力强度因子计算研究

利用Hopkinson压杆对三点弯曲试样进行冲击加载,采集了垂直裂纹面距裂尖2mm和与裂纹面成60°距裂尖5mm处的应变信号。根据裂尖附近测试的应变信号计算试样的动态应力强度因子,并与有限元计算结果进行比较,结果表明由于裂尖有一段疲劳裂纹区,通过裂尖附近应变信号来计算动态应力强度因子时,如果裂尖位置确定不准及粘贴应变片位置不够准确对计算结果将带来很大影响。因此利用应变片法计算动态应力强度因子时,为了获得更准确的计算结果,在实验后应对试件裂纹面进行分析测量,重新确定裂尖位置,必要时需对应变片至裂尖距离进行修正后再计算动态应力强度因子值。     

The penny-shaped crack at a bonded plane with localized elastic non-homogeneity

This paper examines the axisymmetric problem pertaining to a penny-shaped crack which is located at the bonded plane of two similar elastic halfspace regions which exhibit localized axial variations in the linear elastic shear modulus, which has the form G(z)=G₁+G₂e^±ζz. The equations of elasticity governing this type of non-homogeneity are solved by employing a Hankel transform technique. The resulting mixed boundary value problem associated with the penny-shaped crack is reduced to a Fredholm integral equation of the second kind which is solved in a numerical fashion to generate the crack opening mode stress intensity factor at the tip.     

Transient analysis of a propagating crack with finite length subjected to a horizontally polarized shear wave

In this study, the transient response of a finite crack subjected to an incident horizontally polarized shear wave and then propagated with a constant speed in an unbounded elastic solid is investigated. Initially, the finite crack with crack length l is stress-free and at rest. At time t = 0, an incident horizontally polarized shear wave strikes at one of the crack tips and will arrive at the other tip at a later time. Then, two crack tips propagate along the crack tip line with different velocities as the corresponding stress intensity factors reach their fracture toughness. The correspondent configuration is shown in Fig. 1

1. Download : Download high-res image (31KB)
2. Download : Download full-size image

Fig. 1. Configuration and coordinate systems of a finite crack in an unbounded medium.

. In analyzing this problem, diffracted waves generated by two propagating crack tips must be taken into account and it makes the analysis extremely difficult. In order to solve this problem, the transform formula in the Laplace transform domain between moving and stationary coordinates is first established. Complete solutions are determined by superposition of proposed fundamental solutions in the Laplace transform domain. The fundamental solutions to be used are from the problems of applying exponentially distributed traction and screw dislocation on crack faces and along the crack tip line, respectively. The exact transient solutions of dynamic stress intensity factor for the first few diffracted waves that arrive at two crack tips are obtained and expressed in compact formulations. Numerical calculations of dynamic stress intensity factors for both tips are evaluated and the results are discussed in detail.     

Subsonic interfacial fracture using strain gages in isotropic–orthotropic bimaterial

An experimental study has been conducted in which strain fields were used to investigate the behavior of subsonic crack propagation along the interface of an isotropic–orthotropic bimaterial system. Strain field equations were developed from available field equations and critically evaluated in a parametric study to identify optimum strain gage location and orientation. Bimaterial specimens were prepared with PSM-1 polycarbonate and Scotchply^® 1002 unidirectional, glass-fiber-reinforced, epoxy composite. Dynamic experiments were conducted using these specimens with strain gages mounted on the composite half to obtain values of the dynamic complex stress intensity factor, K=K₁+iK₂, in the region of the crack tip while photoelasticity was used on the PSM-1 half. Results show that the trend and magnitude of K obtained using strain gages compare favorably with those obtained using photoelasticity.     

A novel method in determination of dynamic fracture toughness under mixed mode I/II impact loading

The objective of this paper is to propose a novel methodology for determining dynamic fracture toughness (DFT) of materials under mixed mode I/II impact loading. Previous experimental investigations on mixed mode fracture have been largely limited to qusi-static conditions, due to difficulties in the generation of mixed mode dynamic loading and the precise control of mode mixity at crack tip, in absence of sophisticated experimental techniques. In this study, a hybrid experimental–numerical approach is employed to measure mixed mode DFT of 40Cr high strength steel, with the aid of the split Hopkinson tension bar (SHTB) apparatus and finite element analysis (FEA). A fixture device and a series of tensile specimens with an inclined center crack are designed for the tests to generate the components of mode I and mode II dynamic stress intensity factors (DSIF). Through the change of the crack inclination angle β (=90°, 60°, 45°, and 30°), the K_II/K_I ratio is successfully controlled in the range from 0 to 1.14. A mixed mode I/II dynamic fracture plane, which can also exhibit the information of crack inclination angle and loading rate at the same time, is obtained based on the experimental results. A safety zone is determined in this plane according to the characteristic line. Through observation of the fracture surfaces, different fracture mechanisms are found for pure mode I and mixed mode fractures.     

Dynamic stress intensity factor K III and dynamic crack propagation characteristics of anisotropic materials

Based on the mechanics of anisotropic materials, the dynamic propagation problem of a mode Ⅲ crack in an infinite anisotropic body is investigated. Stress, strain and displacement around the crack tip are expressed as an analytical complex function, which can be represented in power series. Constant coefficients of series are determined by boundary conditions. Expressions of dynamic stress intensity factors for a mode Ⅲ crack are obtained. Components of dynamic stress, dynamic strain and dynamic displacement around the crack tip are derived. Crack propagation characteristics are represented by the mechanical properties of the anisotropic materials, i.e., crack propagation velocity M and the parameter ~. The faster the crack velocity is, the greater the maximums of stress components and dynamic displacement components around the crack tip are. In particular, the parameter α affects stress and dynamic displacement around the crack tip.     

An analysis on three-dimensional effects near the tip of a crack in an elastic plate

An infinite plate containing a finite through crack under tensile loading is analysed by Fourier transform based on the Kane-Mindlin kinematic assumptions for the quasi-three-dimensional deformation of plates in extension. The asymptotic expressions of stress and displacement fields near the crack tip, the variation of the stress intensity factor with the plate-thickness and the three-dimensional deformation zone near the crack tip are investigated. The results of the analysis show that, (a) the crack-tip stress and displacement fields accounting for the plate-thickness effects are different from the plane stress solutions and this is true even for extremely small parameter (=1–vh/6 a). In a very small region near the crack tip, plane strain solutions prevail; (b) the ratio of the stress intensity factor K_I to the corresponding plane stress one K_I, K_I/K _I ^o , approaches 1/(1–v²) as tends to zero; (c) plane stress solutions can give satisfactory results for points a distance from the crack tip greater than about three-fourths of the plate-thickness; (d) the linear elastic result for the zone of three-dimensional effects is approximately valid for an elasto-plastic material with linear strain-hardening when the plastic tangential mudulus E_t is not very small.The Project Supported by National Natural Science Foundation of China.