A spiro to ansa rearrangement in cyclotriphosphazene derivatives

Nucleophilic substitution reactions of cyclotriphosphazene derivatives having five-membered spiro rings, N(3)P(3)Cl(4)[O(CH(2))(2)X] (X = NH or O) with alkoxides (of tetraethylene glycol and some mono-functional alcohols) give unexpected rearrangements to form stable seven-membered ring ansa compounds, even though crystallographic evidence shows ring distortion and compression of the cyclophosphazene ring. With weaker nucleophiles such as sodium phenoxide and pyrrolidine substitution at a PCl2 group is preferred and no rearrangement takes place. In contrast, reactions of the analogous phosphazenes containing six-membered spiro rings, N(3)P(3)Cl(4)[O(CH(2))(3)X], with all of the above reagents give only normal substitution reactions at the PCl2 moieties and no rearrangement products. The spiro to ansa rearrangements in cyclophosphazenes are remarkable as the reported primary reaction products with the same difunctional reagents HO(CH(2))(2)XH are predominantly spiro, with some dangling and bridging derivatives, but no ansa compounds.     

Bridged cyclophosphazenes resulting from deprotonation reactions of cyclotriphophazenes bearing a P-NH group

Cyclotriphosphazene derivatives containing a P-NHR group in the side-chain react in the presence of a strong base to form stable intermolecular bridged products. Reaction of sodium hydride with mono-spiro cyclophosphazene derivatives having a P-NH group, N(3)P(3)Cl(4)[O(CH(2))(3)NH], (1a) or N(3)P(3)Cl(4)[CH(3)N(CH(2))(3)NH], (1b) leads to formation of bis-cyclophosphazenes bridged with an eight-membered cyclophosphazene ring in an ansa arrangement (2a, 2b) whereas reaction of sodium hydride with mono-amino cyclophosphazene derivatives [N(3)P(3)Cl(5)(NHR), R = n-hexyl, 3a; i-Pr, 3b; Ph, 3c] give bis-cyclophosphazenes bridged with a four-membered cyclophosphazane ring in a spiro arrangement (4a-c). In the latter reaction P-O-P bridged compounds (5a-c) were also obtained as a result of hydrolysis reactions associated with the amount of moisture in the solvent tetrahydrofuran. In addition, it was found that reaction of a mixture of cyclotriphosphazene with either mono spiro compound, (1a) or (1b), in the presence of sodium hydride lead to formation of the first examples of asymmetrically-bridged cyclophosphazenes (6a-b).     

Ring-closing metathesis reactions of terminal alkene-derived cyclic phosphazenes

The first examples of ring-closing metathesis (RCM) reactions of a series of terminal alkene-derived cyclic phosphazenes have been carried out. The tetrakis-, hexakis-, and octakis(allyloxy)cyclophosphazenes (NPPh(2))(NP(OCH(2)CH=CH(2))(2))(2) (1), N(3)P(3)(OCH(2)CH=CH(2))(6) (2), and N(4)P(4)(OCH(2)CH=CH(2))(8) (3) and the tetrakis(allyloxy)-S-phenylthionylphosphazene (NS(O)Ph)[NP(OCH(2)CH=CH(2))(2)](2) (4) were prepared by the reactions of CH(2)=CHCH(2)ONa with the cyclophosphazenes (NPPh(2))(NPCl(2))(2), N(3)P(3)Cl(6), and N(4)P(4)Cl(8) and the S-phenylthionylphosphazene (NS(O)Ph)(NPCl(2))(2). The reactions of 1-4 with Grubbs first-generation olefin metathesis catalyst Cl(2)Ru=CHPh(PCy(3))(2) resulted in the selective formation of seven-membered di-, tri-, and tetraspirocyclic phosphazene compounds (NPPh(2))[NP(OCH(2)CH=CHCH(2)O)](2) (5), N(3)P(3)(OCH(2)CH=CHCH(2)O)(3) (6), and N(4)P(4)(OCH(2)CH=CHCH(2)O)(4) (7) and the dispirocyclic S-phenylthionylphosphazene compound (NS(O)Ph)[NP(OCH(2)CH=CHCH(2)O)](2) (8). X-ray structural studies of 5-8 indicated that the double bond of the spiro-substituted cycloalkene units is in the cis orientation in these compounds. In contrast to the reactions of 1-4, RCM reactions of the homoallyloxy-derived cyclophosphazene and thionylphosphazene (NPPh(2))[NP(OCH(2)CH(2)CH=CH(2))(2)](2) (9) and (NS(O)Ph)[NP(OCH(2)CH(2)CH=CH(2))(2)](2) (10) with the same catalyst resulted in the formation of 11-membered diansa compounds NPPh(2)[NP(OCH(2)CH(2)CH=CHCH(2)CH(2)O)](2) (11) and (NS(O)Ph)[NP(OCH(2)CH(2)CH=CHCH(2)CH(2)O)](2) (13) and the intermolecular doubly bridged ansa-dibino-ansa compounds 12 and 14. The X-ray structural studies of compounds 11 and 13 indicated that the double bonds of the ansa-substituted cycloalkene units are in the trans orientation in these compounds. The geminal bis(homoallyloxy)tetraphenylcyclotriphosphazene [NPPh(2)](2)[NP(OCH(2)CH(2)CH=CH(2))(2)] (15) upon RCM with Grubbs first- and second-generation catalysts gave the spirocyclic product [NPPh(2)](2)[NP(OCH(2)CH(2)CH=CHCH(2)CH(2)O)] (16) along with the geminal dibino-substituted dimeric compound [NPPh(2)](2)[NP(OCH(2)CH(2)CH=CHCH(2)CH(2)O)(2)PN][NPPh(2)](2) (17) as the major product. The dibino compound 17, upon reaction with the Grubbs second-generation catalyst, was found to undergo a unique ring-opening metathesis reaction, opening up the bino bridges and partially converting to the spirocyclic compound 16.     

Ansa versus spiro substitution of cyclophosphazenes: is fluorination essential for ansa to spiro transformation of cyclophosphazenes?

Fluorinated ansa substituted cyclophosphazenes endo-FcCH(2)P(S)(CH(2)O)(2)[P(F)N](2)(F(2)PN) [Fc = ferrocenyl] (1) and exo-FcCH(2)P(S)(CH(2)O)(2)[P(F)N](2)(F(2)PN) (2) readily transform to the spirocyclic compound [FcCH(2)P(S)(CH(2)O)(2)PN](F(2)PN)(2) (3) not only in the presence of CsF but also with non-fluorinated bases such as Cs(2)CO(3), K(2)CO(3), KOBu(t), Et(3)N, DABCO, DBN, and DBU. The analogous tetrachloro ansa compound exo-FcCH(2)P(S)(CH(2)O)(2)[P(Cl)N](2)(Cl(2)PN) (5), however, did not transform to the chlorinated spiro compound (6) in the presence of these bases. With excess of CsF, P-Cl bonds of 5 were found to undergo fluorination leading to the formation of 2, which transformed to spirocyclic compound 3. Time dependent (31)P NMR spectroscopy was used to monitor this transformation. Crystal structure studies on the ansa substituted compounds 4 and 5 have shown weak bonding interactions involving C-H...Cl, C-H...O, and C-H...S interactions.     

Preparation of the first examples of ansa-spiro substituted fluorophosphazenes and their structural studies: analysis of C-H...F-P weak interactions in substituted fluorophosphazenes

The reactions of fluorophosphazenes, endo ansa FcCH(2)P(S)(CH(2)O)(2)[P(F)N](2)(F(2)PN) (1) (Fc = ferrocenyl) and spiro [RCH(2)P(S)(CH(2)O)(2)PN](F(2)PN)(2) (R = Fc (2), C(6)H(5) (3)], with dilithiated diols have been explored. The study resulted in the formation of the first examples of ansa-spiro substituted fluorinated cyclophosphazenes as well as a bisansa substituted fluorophosphazene. The bisansa compound [1,3-[FcCH(2)P(S)(CH(2)O)(2)]][1,5-[CH(2)(CH(2)O)(2)]]N(3)P(3)F(2) (4) was found to be nongeminaly substituted with both the ansa rings in cis configuration, which is in stark contrast to the observations on cyclic chlorophosphazenes where geminal bisansa formation has been observed. The ansa-spiro compounds (5-7) underwent the ansa to spiro transformation leading to dispiro compounds in the presence of catalytic amounts of CsF at room temperature. Two of the ansa-spiro compounds, endo-[3,5-[FcCH(2)P(S)(CH(2)O)(2)]][1,1-[CH(2)(CH(2)O)(2)]]N(3)P(3)F(2) (5) and endo-[3,5-[FcCH(2)P(S)(CH(2)O)(2)]][1,1-[FcCH(2)P(S)(CH(2)O)(2)]]N(3)P(3)F(2) (6), were structurally characterized, and the crystal structures indicate boat-chair conformation as well as crown conformation for the eight-membered ansa rings. Weak C-H.F-P interactions observed in the crystal structures of the ansa-spiro substituted fluorophosphazene derivatives have been analyzed and compared with C-H.F-P interactions of other fluorinated phosphazenes and thionyl phosphazenes.     

Synthesis,structure, and reactivity of some N-phosphorylphosphoranimines

A large series of new N-phosphorylphosphoranimines that bear potentially reactive functional groups on both phosphorus centers were prepared by silicon-nitrogen bond cleavage reactions of N-silylphosphoranimines. Thus, treatment of the N-silylphosphoranimines, Me(3)SiN=P(Me)(R)X (R = Me, Ph; X = OCH(2)CF(3) and R = Me, X = OPh), with phosphoryl chlorides, RP(=O)Cl(2) (R' = Cl, Me, Ph), readily afforded the corresponding N-phosphoryl derivatives, R'P(=O)(Cl)-N=P(Me)(R)X, in high yields. Subsequent reaction with 1 or 2 equiv of the silylamine, Me(3)SiNMe(2), resulted in ligand exchange at the phosphoryl (P=O) group to give the P-dimethylamino analogues, R'P(=O)(NMe(2))N=P(Me)(R)X (R' = Cl, NMe(2), Me, Ph; R = Me, Ph; X = OCH(2)CF(3), OPh). These new N-phosphorylphosphoranimines (and one thiophosphoryl analogue) were obtained as thermally stable, distillable liquids and were characterized by NMR ((1)H, (13)C, and (31)P) spectroscopy and elemental analysis. One member of the series, Cl(2)P(=O)N=P(Me)(Ph)OCH(2)CF(3) (4), was also studied by single-crystal X-ray diffraction which revealed that the formal P(O)-N single bond [1.55(1) A] is shorter than the formal N=PR(2)X double bond [1.60(1) A]. Such structural features are compared to those of similar compounds and discussed in relationship to the unexpected thermolysis pathways observed for these N-phosphorylphosphoranimines, none of which produced poly(phosphazenes).     

C-H cleavage and double alkyl additions to the disulfido ligand in dicyanido-bridged Ru2S2 complexes

Novel dicyanido-bridged dicationic RuIIISSRuIII complexes [{Ru(P(OCH3)3)2}2(mu-S2)(mu-X)2{mu-m-C6H4(CH2CN)2}](CF3SO3)2 (4, X=Cl, Br) were synthesized by the abstraction of the two terminal halide ions of [{RuX(P(OCH3)3)2}2(mu-S2)(mu-X)2] (1, X=Cl, Br) followed by treatment with m-xylylenedicyanide. 4 reacted with 2,3-dimethylbutadiene to give the C4S2 ring-bridged complex [{Ru(P(OCH3)3)2}2{mu-SCH2C(CH3)=C(CH3)CH2S}(mu-X)2{mu-m-C6H4(CH2CN)2}](CF3SO3)2 (6, X=Cl, Br). In addition, 4 reacted with 1-alkenes in CH3OH to give alkenyl disulfide complexes [{Ru(P(OCH3)3)2}2{mu-SS(CH2C=CHR)}(mu-Cl)2{mu-m-C6H4(CH2CN)2}](CF3SO3) (7: R=CH2CH3, 9: R=CH2CH2CH3) and alkenyl methyl disulfide complexes [{Ru(P(OCH3)3)2}2{mu-S(CH3)S(CH2C=HR)}(mu-Cl)2{mu-m-C6H4(CH2CN)2}](CF3SO3)2 (8: R=CH2CH3, 10: R=CH2CH2CH3) via the activation of an allylic C-H bond followed by the elimination of H+ or condensation with CH3OH. Additionally, the reaction of 4 with 3-penten-1-ol gave [{Ru(P(OCH3)3)2}2{mu-SS(CH2C=CHCH2OH)}(mu-Cl)2{mu-m-C6H4(CH2CN)2}](CF3SO3) (11) via the elimination of H+ and [{Ru(P(OCH3)3)2}2(mu-SCH2CH=CHCH2S)(mu-Cl)2{mu-m-C6H4(CH2CN)2}](CF3SO3)2 (12) via the intramolecular elimination of a H2O molecule. 12 was exclusively obtained from the reaction of 4 with 4-bromo-1-butene.     

Fluorinated bismuth alkoxides: from monomers to polymers and oxo-clusters

A series of new bismuth fluoroalkoxide compounds have been prepared through the treatment of 1,1,1,3,3,3-hexafluoro-2-propanol with BiAr3 (where Ar=Ph, p-Tol). Reactions were conducted without the use of any additional solvent and the reaction products distilled or extracted with non-polar or polar Lewis base solvents. Structural analyses reveal that under variable reaction conditions the interaction of BiAr3 with (CF3)2CHOH can give a mixture of bismuth complexes with varying degrees of substitution, cluster formation and aggregation. Compounds [Bi(OCH(CF3)2)3(pyr)2] () (pyr=pyridine), [Bi(OCH(CF3)2)3(thf)3] () (thf=tetrahydrofuran), [Bi2(OCH(CF3)2)3(dabco)3] () (dabco=1,4-diazabicyclo[2.2.2]octane), [PhBi(OCH(CF3)2)2]n (), [Bi2O(OCH(CF3)2)4(C7H8)]2 () (C7H8=toluene), [Bi9O7(OCH(CF3)2)13] (), [Bi2O(OCH(CF3)2)4(Et2O)]2 (), [Bi2O(OCH(CF3)2)4(thf)]2 () and [Bi2O(OCH(CF3)2)4(tmeda)2] () (tmeda=N,N,N',N'-tetramethylethylenediamine) have been fully characterised including by single crystal X-ray diffraction.     

Syntheses of novel exo and endo isomers of ansa-substituted fluorophosphazenes and their facile transformations into spiro isomers in the presence of fluoride ions

Reactions of the dilithiated diols RCH2P(S)(CH2OLi)2 [R = Fc (1), Ph (2) (Fc = ferrocenyl)] with N3P3F6 in equimolar ratios at -80 degrees C result exclusively in the formation of two structural isomers of ansa-substituted compounds, endo-RCH2P(S)(CH2O)2[P(F)N]2(F2PN) [R = Fc (3a), Ph (4a)] and exo-RCH2P(S)(CH2O)2[P(F)N]2(F2PN) [R = Fc (3b), Ph (4b)], which are separated by column chromatography. Increasing the reaction temperature to -40 degrees C results in more of the exo isomers 3b and 4b at the expense of the endo isomers. The formation of the ansa-substituted compounds is found to depend on the dilithiation of the diols, as a reaction of the silylated phosphine sulfide FcCH2P(S)(CH2OSiMe3)2 (5) with N3P3F6 in the presence of CsF does not yield either 3a or 3b but instead gives the spiro isomer [FcCH2P(S)(CH2O)2 PN](F2PN)2 (6) as the disubstitution product of N3P3F6. The ansa isomers 3a and 3b are transformed into the spiro compound 6 in the presence of catalytic amounts of CsF at room temperature in THF, while 4a and 4b are transformed into the spiro compound [PhCH2P(S)(CH2O)2PN](F2PN)2 (7) under similar conditions. The novel conversions of ansa-substituted phosphazenes into spirocyclic phosphazenes were monitored by time-dependent 31P NMR spectroscopy. The effect of temperature on a transformation was studied by carrying out reactions at various temperatures in the range from -60 to +33 degrees C for 3b. In addition, compounds 3a, 3b, 4a, and 6 were structurally characterized. In the case of the ansa compounds, the nitrogen atom flanked by the bridging phosphorus sites was found to deviate significantly from the plane defined by the five remaining atoms of the phosphazene ring.     

Formation of spiro and ansa derivatives in the reaction of 2,2,3,3,4,4-hexafluoropentane-1,5-diol with cyclotriphosphazene: Comparison with 2,2,3,3-tetrafluorobutane-1,4-diol

Reaction of cyclophosphazene, N₃P₃Cl₆ (1), with the sodium derivative of the fluorinated diol, 2,2,3,3,4,4-hexafluoropentane-1,5-diol (2), in THF solution at room temperature afforded five isolated products, whose structures have been characterised by X-ray crystallography and ¹H, ¹⁹F and ³¹P NMR spectroscopy: the mono-spiro compound, N₃P₃Cl₄(OCH₂CF₂CF₂CF₂CH₂O) (3), its ansa isomer (4), a di-spiro derivative N₃P₃Cl₂(OCH₂CF₂CF₂CF₂CH₂O)₂ (5), its spiro-ansa (6) isomer and the tri-spiro compound N₃P₃(OCH₂CF₂CF₂CF₂CH₂O)₃ (7). Quantitative ³¹P NMR measurements of the soluble portion of the reaction mixture show that in the reaction of (1) with the sodium derivative of the fluorinated pentanediol (2) there is a small preference for spiro compounds compared to ansa compounds (ratio ca. 1.3:1), similar to the analogous reaction of (1) with the sodium derivative of the fluorinated butanediol where there is a slightly greater proportion of spiro compared to ansa compounds (ratio ca. 1.5:1). The relative proportions of spiro and ansa compounds is likely to depend on the fine balance in stabilities of the different medium-sized rings in the fluorinated pentanediol (spiro, 8- and ansa, 10-membered rings) compared to the fluorinated butanediol (spiro, 7- and ansa, nine-membered rings) derivatives of cyclophosphazene.     

Syntheses and experimental studies on the relative stabilities of spiro, ansa, and bridged derivatives of cyclic tetrameric fluorophosphazene

Reactions of (CF2CH2OSiMe3)2 and CF2(CF2CH2OSiMe3)2 with N4P4F8 (1) in a 1:2.5 molar ratio resulted in the formation of monospiro compounds [(CF2CH2O)2PN](F2PN)3 (2) and [CF2(CF2)CH2O)2PN](F2PN)3 (4) as well as the intermolecular bridged compounds F7N4P4OCH2CF2CF2CH2OP4N4)F7 (3) and F7N4P4OCH2CF2CF2CF2CH2OP4N4F7 (5). An equimolar reaction of dilithiated 1,3-propanediol with 1 resulted in the 1,3-ansa-substituted compound CH2(CH2O)2[P(F)N]2(F2PN)2 (6) as the major product in good yield. However, an analogous reaction of the dilithiated 1,3-propanedithiol with 1 gave only the spirocyclic compound CH2(CH2S)2(PN)(F2PN)3 (8). The molecular structures of 2 and 6 were determined by single-crystal X-ray diffraction. In the presence of catalytic amounts of CsF in THF, the bridged compound 3 was converted to the spirocyclic compound 2 while the 1,3-ansa compound 6 under similar conditions transformed into the monospiro-substituted compound CH2(CH2O)2 (PN)(F2PN)3 (7). These transformations were monitored by time-dependent 19F and 31P NMR studies.     

O-Methylephedrine: a versatile and highly efficient ortho-directing group. Synthesis of enantiopure 1,2-disubstituted ferrocene derivatives.

O-Methylephedrine was identified as a very efficient chiral auxiliary for ortho-lithiation reactions of ferrocenes. (1R,2S)-O-Methylephedrine [CH(3)NHCH(CH(3))CH(Ph)OCH(3)] was reacted with N-ferrocenylmethyl-N,N,N-trimethylammonium iodide [FcCH(2)N(CH(3))(3)I; Fc = ferrocenyl] to give (1R,2S)-N-ferrocenylmethyl-O-methylephedrine. Treatment of this compound with t-BuLi in pentane followed by quenching with the electrophiles iodine, dibromotetrafluoroethane, chlorodiphenylphosphine or benzophenone gave 2-substituted ferrocenes in 98% de and with the (R(p))-ferrocene configuration. Subsequently, the chiral auxiliary could be replaced by systems including dimethylamine, acetate, diaryl- or dialkylphosphines to give a number of enantiopure bifunctional 1,2-disubstituted ferrocene derivatives such as (R(p))-N-2-iodo- or (R(p))-N-2-bromoferrocenylmethyldimethylamine or (R(p))-2-acetoxymethyl-1-diphenylphosphinoferrocene. As an application, ferrocenyl diphosphines possessing a planar (R(p))-ferrocene configuration only [1,2-(PPh(2))FcCH(2)PR(2), R = Cy, Ph, [3,5-(CF(3))(2)Ph]] were synthesized in three steps from O-methylephedrine and N-ferrocenylmethyl-N,N,N-trimethylammonium iodide in up to 77% overall yield.     

Structure and dynamics of tetrakis(thiophosphinato)resorcinarene complexes of silver(I), gold(I), and palladium(II)

The coordination chemistry of the tetrakis(thiophosphinato)resorcinarene sulfur-donor ligands [(C6H2CH{CH2CH2Ph})4{OC(O)R}4{OP(=S)Ph2}4] (L), where R = OCH2Ph, 4-C6H4CH3, C6H11, C4H3S, or OCH2CCH, is reported. Both silver(I) and gold(I) form cationic complexes of the type [LM2]2+, in which the ligand acts as a bis(chelate) in forming complexes with linear S-M-S (M = Ag or Au) stereochemistry. Gold(I) also forms the unusual complex [L(AuCl)2][LAu2]2+, which forms a supramolecular polymer through intermolecular aurophilic attractions. Palladium(II) forms the complex [LPd2Cl2(mu-Cl)2], in which the dipalladium(II) unit extends the natural bowl structure of the resorcinarene. The solid-state and solution conformations of the complexes, as determined by X-ray structure determination and NMR spectroscopy, respectively, are similar, but several complexes were found to exhibit dynamic behavior in solution, involving either conformational mobility of the resorcinarene unit or intermolecular ligand exchange.     

Synthesis and structure of new carborane-substituted cyclotriphosphazenes

The reactions of [N(3)P(3)Cl(6)] with one, two, or three equivalents of the difunctional 1,2-closo-carborane C(2)B(10)H(10)[CH(2)OH](2) and K(2)CO(3) in acetone have been investigated. These reactions led to the new spiro-closo-carboranylphosphazenes gem-[N(3)P(3)Cl(6-2n)[(OCH(2))(2)C(2)B(10)H(10)](n)] (n=1 (1), 2 (2)) and the first fully carborane-substituted phosphazene gem-[N(3)P(3)[(OCH(2))(2)C(2)B(10)H(10)](3)] (3). A bridged product, non-gem-[N(3)P(3)Cl(4)[(OCH(2))(2)C(2)B(10)H(10)]] (4), was also detected. The reaction of the well-known spiro derivatives [N(3)P(3)Cl(2)(O(2)C(12)H(8))(2)] and [N(3)P(3)Cl(4)(O(2)C(12)H(8))] with the same carborane-diol and K(2)CO(3) in acetone gave the new compounds gem-[N(3)P(3)(O(2)C(12)H(8))(3-n)[(OCH(2))(2)C(2)B(10)H(10)](n)] (n=1 (5) or 2 (6), respectively), without signs of intra- or intermolecularly bridged species. Upon treatment with NEt(3) in acetone, compound 5 was converted into the corresponding nido-carboranylphosphazene. However, the reaction of gem-[N(3)P(3)(O(2)C(12)H(8))(2)[(OCH(2))(2)C(2)B(10)H(10)]] (5) with NEt(3) in ethanol instead of acetone proceeded in a different manner to give the new compound (NHEt(3))(2)[N(3)P(3)(O(2)C(12)H(8))(2)(O)[OCH(2)C(2)B(9)H(10)CH(2)OCH(2)CH(3)]] (7). For compounds with two 2,2'-dioxybiphenyl units, gem-[N(3)P(3)(O(2)C(12)H(8))(2)[(OCH(2))(2)C(2)B(10)H(10)]] (5), (NHEt(3))[N(3)P(3)(O(2)C(12)H(8))(2)[(OCH(2))(2)C(2)B(9)H(10)]] (8), and (NHEt(3))(2)[N(3)P(3)(O(2)C(12)H(8))(2)(O)[OCH(2)C(2)B(9)H(10)CH(2)OCH(2)CH(3)]] (7), a mixture of different stereoisomers may be expected. However, for 5 and 7 only the meso compounds seem to be formed, with the same (R,S)-configuration as in the precursor [N(3)P(3)Cl(2)(O(2)C(12)H(8))(2)]. The reaction of 5 to give 8 seems to proceed with a change of configuration at one phosphorus center, giving a racemic mixture. The crystal structures of the nido-carboranylphosphazenes 7 and 8 have been confirmed by X-ray diffraction methods.     

cyclo-CH2[Sn(CI2)CH2Si(Me2)]2O]: synthesis and complexation behaviour of a novel, cyclic, bidentate Lewis acid and its conversion into a tin-containing fluorosilane with intermolecular Si-F...Sn bridges

Acid-catalysed hydrolysis of [CH2[(Sn(Ph2)CH2Si(OiPr)Me2]2] followed by subsequent reaction with mercuric chloride in acetone afforded the novel silicon- and tin-containing eight-membered ring [cyclo-CH2[Sn(Cl2)CH2Si(Me2)]2O] in good yield, the crystal structure of which is reported. 119Sn NMR and X-ray studies indicate that [cyclo-CH2[Sn(Cl2)CH2Si(Me2)]2O] acts as a bidentate Lewis acid towards chloride ions exclusively forming the 1:1 complex [(Ph3P)2N]+[cyclo-CH2[Sn(Cl2)CH2Si(Me2)]2OCl]- upon addition of [(Ph3P)2N]+Cl- . Also reported are the synthesis and structure of [K(dibenzo[18]crown-6)]+[cyclo-CH2(Sn(Cl2)CH2Si(Me2)]2OF]-, the first completely characterised organostannate with a C2SnCl2F- substituent pattern. No ring-opening polymerisation could be achieved for [cyclo-CH2[Sn(Cl2)CH2Si(Me2)]2O] or for its perphenylated derivative [cyclo-CH2[Sn(Ph2)CH2Si(Me2)]2O]. The reaction of [cyclo-CH2[Sn(Cl2)CH2Si(Me2)]2O] with Me3O+BF4- gave the tin-containing fluorosilane [CH2[Sn(Cl2)CH2Si(F)Me2]2], in which the Si-F bond is activated by intermolecular Si-F...Sn interactions in the solid state.     

Mononuclear gold(I) acetylide complexes with urea group: synthesis, characterization, photophysics, and anion sensing properties

A series of mononuclear gold(I) acetylide complexes with urea moiety, R'(3)PAuC≡CC(6)H(4)-4-NHC(O)NHC(6)H(4)-4-R (R' = cyclohexyl, R = NO(2) (2a), CF(3) (2b), Cl (2c), H (2d), CH(3) (2e), (t)Bu (2f), OCH(3) (2g); R' = phenyl, R = NO(2) (3a), OCH(3) (3b); R' = 4-methoxyphenyl, R = H (4a), OCH(3) (4b)), have been synthesized and characterized. The crystal structures of Ph(3)PAuC≡CC(6)H(4)-4-NHC(O)NHC(6)H(4)-4-NO(2) (3a) and (4-CH(3)OC(6)H(4))(3)PAuC≡CC(6)H(4)-4-NHC(O)NHC(6)H(5) (4a) have been determined by X-ray diffraction. Complexes 2a-2g, 3b, and 4a-4b show intense luminescence both in the solid state and in degassed THF solution at 298 K. Anion binding properties of complexes 2a-2g, 3a-3b, and 4a-4b have been studied by UV-vis and (1)H NMR titration experiments. In general, the log K values of 2a-2g with the same anion in THF depend on the substituent R on the acetylide ligand of 2a-2g: R = NO(2) (2a) > CF(3) (2b) ≥ Cl (2c) > H (2d) > CH(3) (2e) ≈ (t)Bu (2f) ≥ OCH(3) (2g). Complex 2a with NO(2) group shows the dramatic color change toward F(-) in DMSO, which provides an access of naked eye detection of F(-).     

Self-assembly of rings, catenanes, and a doubly braided catenane containing gold(I): the hinge-group effect in diacetylide ligands

Reaction of the flexible dialkynyldigold(I) precursors X(4-C6H4OCH2C-CAu)2 with 1,4-bis(diphenylphosphino)butane gave complexes of formula [[[mu-X(4-C6H4OCH2CCAu)2[mu-(Ph2PCH2CH2CH2CH2PPh2)]]n]. The complexes exist as 25-membered ring compounds with n = 1 when X = O or S, as [2]catenanes with n = 2 when X = CH2 or CMe2, and as a unique doubly braided [2]catenane, containing interlocked 50-membered rings with n = 4 when X = cyclohexylidene. These compounds form easily and selectively by self-assembly; reasons for the selectivity are also discussed.     

Syntheses, derivatives, solubility, and interfacial properties of 2-methyl-2-polyfluoroalkenyloxymethyl-1,3-propanediols: potential building blocks for syntheses of amphiphatic macromolecules

2-Hydroxymethyl-2-methyl-1,3-propanediol (A) was reacted with (Me(3)Si)(2)NH and toluenesulfonyl chloride (TsCl) to give mainly CH(3)C(CH(2)OSiMe(3))(3) (1), and CH(3)C(CH(2)OTs)(3) (2), respectively. With allyl bromide, the products were CH(3)C(CH(2)OCH(2)CH[double bond]CH(2))(2)(CH(2)OH) (3) and CH(3)C(CH(2)OCH(2)CH[double bond]CH(2))(CH(2)OH)(2) x H(2)O (4). The reactions of 4 with perfluoroalkyl iodides (R(f)I) were catalyzed by Cu(I)Cl to form 2-methyl-2-polyfluoroalkenyloxymethyl-1,3-propanediols: (R(f)CH=CHCH(2)OCH(2))C(Me)(CH(2)OH)(2) [R(f) = C(4)F(9) (5), C(8)F(17) (6), and (CF(2)CF(2))(4)OCF(CF(3))(2) (7)]. Reduction of 5 and 6 with hydrogen gave two new 2-methyl-2-polyfluoroalkyloxymethyl-1,3-propanediols, 8 and 9. The sodium salt of 9 was reacted with allyl bromide or acetyl chloride to form (C(8)F(17)CH(2)CH(2)CH(2)OCH(2))C(Me)(CH(2)OX)(CH(2)OH)(2) [where X = CH(2)CH=CH(2) (10) or C(O)CH(3) (12)] and (C(8)F(17)CH(2)CH(2)CH(2)OCH(2))C(Me)(CH(2)OX)(2) [where X = CH(2)CH[double bond]CH(2) (11) or C(O)CH(3) (13)]. Reaction of tolenesulfonyl chloride with 7 gave the monotosylate, 14, as the sole product. With 4-trifluoromethylbenzyl bromide, the sodium salt of 4 gave (4-CF(3)C(6)H(4)CH(2)OCH(2))C(Me)(CH(2)CH[double bond]CH(2))(CH(2)OH) x H(2)O (15). The compounds were characterized by NMR ((1)H, (13)C, (19)F, (29)Si), GC-MS, and high-resolution MS or elemental analyses. UV evidence was obtained for partitioning of 9, 12, 14, and 15 between perfluorodecalin and n-octanol. The test compounds acted as surfactants by facilitating the solubility of phenol and Si(CH[double bond]CH(2))(4) in perfluorodecalin. The single-crystal X-ray structure of 8 was also obtained. It crystallized in the monoclinic space group P2(1)/c, and unit cell dimensions were a = 24.966(2) A (alpha = 90), b = 6.1371(6) A (beta = 100.730(2)), and c = 10.5669(10) A (gamma = 90).     

Reliable low-cost theoretical procedures for studying addition-fragmentation in RAFT polymerization

Enthalpies for the beta-scission reactions, R'SC(*)(Z)SR --> R'SC(Z)=S + (*)R (for R, R' = CH(3), CH(2)CH(3), CH(2)CN, C(CH(3))(2)CN, CH(2)COOCH(3), CH(CH(3))COOCH(3), CH(2)OCOCH(3), CH(2)Ph, C(CH(3))(2)Ph, and CH(CH(3))Ph and Z = CH(3), H, Cl, CN, CF(3), NH(2), Ph, CH(2)Ph, OCH(3), OCH(2)CH(3), OCH(CH(3))(2), OC(CH(3))(3), and F) have been calculated using a variety of DFT, MP2, and ONIOM-based methods, as well as G3(MP2)-RAD, with a view to identifying an accurate method that can be practically applied to larger systems. None of the DFT methods examined can reproduce the quantitative, nor qualitative, values of the fragmentation enthalpy; in most cases the relative errors are over 20 kJ mol(-1) and in some cases as much as 55 kJ mol(-1). The ROMP2 methods fare much better, but fail when the leaving group radical (R(*)) is substituted with a group (such as phenyl or CN) that delocalizes the unpaired electron. However, provided the primary substituents on the leaving group radical are included in the core system, an ONIOM-based approach in which the full system is studied via ROMP2 (or SCS- or SOS-MP2) calculations with the 6-311+G(3df,2p) basis set and the core system is studied at G3(MP2)-RAD can reproduce the corresponding G3(MP2)-RAD values of the full systems within 5 kJ mol(-1) and is a practical method for use on larger systems.     

Synthesis,structure and in vitro anticancer activity of ruthenium(II) and platinum(II) complexes with chiral aminophosphine ligands

Transition Metal Chemistry - (R)-[Ru(η6-p-MeC6H4iPr)Cl2{Ph2PNHCH(CH3)(C6H4-4-F)}] (1) and cis-(R,R)-[PtCl2{Ph2PNHCH(CH3)(C6H4-4-F)}2] (2) have been obtained by the reaction of the chiral...