板弯曲求解新体系及其应用

建立平面弹性与板弯曲的相似性理论,给出了板弯曲经典理论的另一套基本方程与求解方法,然后进入哈密顿体系用直接法研究板弯曲问题．新方法论应用分离变量、本征函数展开方法给出了条形板问题的分析解,突破了传统半逆解法的限制．结果表明新方法论有广阔的应用前景．     

弹性地基上圆板在轴对称载荷作用下的迭代解

提出了弹性地基上圆板承受轴对称载荷作用弯曲问题的一种新的解法－迭代法。文中导出了迭代过程的一般公式，并给出了关于收敛性的一般说明。未方法简单可靠，能收敛于精确解，可直接计算弹性地基圆板在轴对称载荷作用下的弯曲问题。文后给出算例，只二次迭代即得到了满意的结果。     

弹性薄板弯曲问题的双互易杂交边界点法

基于一种板的修正变分泛函,将杂交边界点法与双互易法结合,用于薄板弯曲问题的分析。该方法将问题的解分为齐次方程的通解和非齐次的特解两部分,特解采用径向基函数插值得到,而通解则使用杂交边界点法求解。在杂交边界点法用于求解通解的列式过程中,边界变量采用移动最小二乘近似,域内变量则采用基本解插值。与有限元法相比,该方法仅需要边界上离散点的信息,无论插值还是积分都不需要网格,域内点仅用来插值非齐次项,因而仍是一种纯边界类型的无网格方法。数值算例表明,本文方法能以很少的计算自由度获得与其它方法同样的计算精度,且具有前后处理简单、收敛速度快等优点,适合于求解工程中各种薄板的弯曲问题。     

环扇形薄板弯曲问题的环向辛对偶求解方法

根据平面弹性与薄板弯曲问题的相似性原理,极坐标系板弯曲的弯矩函数被引入作为原变量,并通过恰当的辛内积定义建立了环扇形薄板弯曲问题的一个辛几何空间. 然后应用类Hellinger-Reissner变分原理,导出了辛几何空间的对偶方程,从而将环扇形薄板弯曲问题导入到辛对偶求解体系. 于是,分离变量和本征展开的有效数学物理方法得以实施,给出环扇形薄板弯曲问题的一个分析求解方法. 具体讨论了两弧边简支和两弧边一边固支一边自由薄板的本征问题,分别导出它们对应的本征值超越方程和本征向量,并给出原问题本征展开形式的通解. 最后,给出了两个算例的分析解并与已有文献或数值方法的解进行了对比,结果表明该方法有很好的收敛性和精度.      

Multiple reciprocity method with two series of sequences of high-order fundamental solution for thin plate bending

IntroductionIt’swell_knownthatthecomplicatedfundamentalsolution[1,2 ]forHelmholtzequationΔu(x) +k2 u(x) =0　　(x∈Ω:boundedopenregioninR2 )isu (x,y) =-iH(2 )0 (k x-y ) 4,thusit’snotconvenientfornumericalcomputation .IfapplyingthesimplefundamentalsolutionofLaplaceequationu 0 (x ,y) =-ln｜x-y｜(2π) ,theexpressionforthesolutionofequationintheclosedregion Ωisc(y)u(y) + ∫Γu(x) u 0 (x,y) nx -u 0 (x ,y) u(x) n dsx =-k2∫Ωu(x)u 0 (x,y)dΩx.Astherightsideappearstheregionalintegrationinclu…     

Winkler地基上变厚度圆板的轴对称弯曲

本文提出了Winkler地基上变厚度圆板轴对称弯曲的传递矩阵算法。首先,根据贝塞尔函数理论获得了等厚度圆板和环板单元在任意荷载作用下轴对称弯曲的解析解,这些解均由通解和特解两部分组成。基于这些解析解,导出了等厚度圆板和环板单元的传递矩阵。然后沿径向将变厚度圆板划分成一个等厚度圆板单元和一系列等厚度环板单元,应用传递矩阵算法原理获得了变厚度圆板的整体传递矩阵。引入圆板的边界条件,给出了该板每条节线上的挠度、径向转角、径向弯矩和径向剪力。最后,讨论了受均布荷载作用的简支线性变厚度圆板的弯曲,将本文数值解与解析解进行比较,证实了本文方法的有效性,并简要地讨论了地基参数对板挠度和径向弯矩的影响。     

面内变刚度薄板弯曲问题的挠度?弯矩耦合神经网络方法

发展了一种求解面内变刚度功能梯度薄板弯曲问题的神经网络方法. 面内变刚度薄板弯曲问题的偏微分控制方程为一复杂的4阶偏微分方程, 传统的基于强形式的神经网络解法在求解该偏微分方程时可能会遇到难以收敛、边界条件难以处理的情况. 本文基于Kirchhoff薄板弯曲理论, 提出了一种直角坐标系下任意面内变刚度薄板弯曲问题的神经网络解法. 神经网络模型包含挠度网络与弯矩网络, 分别用于预测薄板的挠度与弯矩, 从而将求解4阶偏微分方程转换为求解一系列二阶偏微分方程组, 通过对挠度、弯矩试函数的构造可使得神经网络计算结果严格满足边界条件. 在误差的反向传播中, 根据本文提出的误差函数公式计算训练误差并结合Adam优化算法更新模型的内部参数. 求解了不同边界条件、形状的面内变刚度薄板弯曲问题, 并将所得计算结果与理论解、有限元解进行对比. 研究表明, 本文模型对于求解面内变刚度薄板弯曲问题具备适应性, 虽然模型中的弯矩网络收敛较挠度网络要慢, 但本文方法在试函数的构造上更为简单、适应性更强.      

Crack in a 2D beam lattice: Analytical solutions for two bending modes

We consider an infinite square-cell lattice of elastic beams with a semi-infinite crack. Symmetric and antisymmetric bending modes of fracture under remote loads are examined. The related long-wave asymptotes corresponding to a continuous anisotropic bending plate are also considered. In the latter model, the symmetric mode is characterized by the square-root type singularity, whereas the antisymmetric mode results in a hyper-singular field. A solution for the continuous plate with a finite crack is also presented. These closed-form continuous solutions describe the fields in the whole plane. The main goal is to establish analytical connections between the ‘macrolevel’ state, defined by the continuous asymptote of the lattice solution, and the maximal bending moment in the crack-front beam, that is, to determine the resistance of the lattice with an initial crack to the crack advance. The solutions are obtained in the same way as for mass-spring lattices. Considering the static problems we use the discrete Fourier transform and the Wiener-Hopf technique. Monotonically distributed bending moments ahead of the crack are determined for the symmetric mode, and a self-equilibrated transverse force distribution is found for the antisymmetric mode. It is shown that in the latter case only the crack-front beam resists to the fracture development, whereas the forces in the other beams facilitate the fracture. In this way, the macrolevel fracture energy is determined in terms of the material strength. The macrolevel energy release is found to be much greater than the critical strain energy of the beam, especially in the hyper-singular mode. In both problems, it is found that among the beams surrounding the crack the crack-front beam is maximally stressed, and hence its strength defines the strength of the structure.     

薄板弯曲问题的虚边界元-最小二乘法

本文提出求解任意形状的薄板弯曲问题的虚边界元-最小二乘法。本法首先利用薄板弯曲平衡方程的格林函数和离开实际边界上分布的未知的横向荷载和法向弯矩函数建立满足实际边界条件的积分方程;然后采用最小二乘法和沿虚边界分段离散化的待定的分布横向荷载和法向弯矩函数得到求上述积分方程离散化数值解的线性代数方程组。导出了一系列的数值积分的公式,并求解了许多例题,数值结果说明本法完全避免了奇异积分及其复杂的处理方法和耗时的运算,而且在边界及其附近区域解的精度比普通边界元(以后简称边界元)法大大地提高了。     

大挠度橡胶圆板的数值解及对其Hencky解的修正

将橡胶圆板视为薄膜，根据薄膜的无矩特性，巧妙采用数学方法求得橡胶圆板的膨胀状态几何特性描述，进而通过应力应变求得挠度与载荷的关系。同时，基于Hencky方法求得了挠度与载荷关系的Hencky解。对两种方法所得到的结果进行比较分析，并对Hencky解所产生的偏差进行校正的方法作了探讨。     

应变硬化薄板夹持型滚弯成形过程分析

现存文献对薄板的连续滚弯成形过程的数学模拟多限于讨论三辊轮解锥型弯板过程,且基于较多的假定和板的小变形情况。而开发有更多的功能和更高的生产效率的四辊轮连续弯板机需研究夹持型滚弯成形过程。本文将「１」的工作,理想塑性材料平面应变薄板的夹持型连续滚弯成形过程的弹塑性大变形弯曲的力学分析,推广至一般应变硬化材料的情形。得出了控制微分方程的解析解。采用固支边界条件模拟刚度很大的平持系统对板的夹持。通过对线     

Plate and shell buckling by the Karman scheme under creep conditions

The problem of stability and buckling of plates under creep conditions has been studied in the fundamental papers [1–4]. In the papers [5, 6], the theory of buckling of rods and plates is developed in the framework of the dominating bending model [7], where the forces in the midplane of the plate were determined independently of the solution of the bending problem. In what follows, we use the Karman scheme [8] to derive two basic differential equations of the coupled theory of the plane stress state and bending. We solve the problem of buckling of a rectilinear plate for linearly viscous (Newtonian) medium and show that the Karman scheme gives an essential correction to the solution of the bending problem for initial deflections comparable with the plate thickness.     

The bending of a thick rectangular plate with three clamped edges and one free edge

The exact solution of the bending of a thick rectangular plate with three clamped edges and one free edge under a uniform transverse load is obtained by means of the concept of generalized simply-supported boundary^[1] in Reissner’s theory of thick plates. The effect of the thickness h of a plate on the bending is studied and the applicable range of Kirchhoffs theory for bending of thin plates is considered.     

各向异性矩形薄板弯曲问题的一般解

给出了各向异性矩形薄板弯曲问题微分方程的一般解。可以求解任意载荷作用下各种边界的弯曲问题。以四边固支的正方形板为例进行了数值计算。     

Analytical solution of rectangular plate with in-plane variable stiffness

The bending problem of a thin rectangular plate with in-plane variable stiffness is studied. The basic equation is formulated for the two-opposite-edge simply supported rectangular plate under the distributed loads. The formulation is based on the assumption that the flexural rigidity of the plate varies in the plane following a power form, and Poisson’s ratio is constant. A fourth-order partial differential equation with variable coefficients is derived by assuming a Levy-type form for the transverse displacement. The governing equation can be transformed into a Whittaker equation, and an analytical solution is obtained for a thin rectangular plate subjected to the distributed loads. The validity of the present solution is shown by comparing the present results with those of the classical solution. The influence of in-plane variable stiffness on the deflection and bending moment is studied by numerical examples. The analytical solution presented here is useful in the design of rectangular plates with in-plane variable stiffness.     

单光束错位云纹干涉法测板的斜率和曲率

本文提出一种用高密度位相型闪耀光栅测取板的曲率和斜率的单光束错位云纹干涉法,由于这一方法具有高灵敏度。大量程和高反差的优点。可有效地用来求解板的弯曲问题。文中还给出了周边固定圆板和带缺口的方板两个应用实例。     

Analytical solution for bending stress intensity factor in an orthotropic elastic plate containing a crack and subjected to concentrated moments

The problem of estimating the bending stress distribution in the neighborhood of a crack located on a single line in an orthotropic elastic plate of constant thickness subjected to out-of-plane concentrated moments is examined. Using classical plate theory and integral transform techniques, the general formulae for the bending moment and twisting moment in an elastic plate containing cracks located on a single line are derived. The solution is obtained in a closed form for the case in which there is a single crack in an infinite plate subjected to symmetric concentrated moments.     

一类新变量的Reissner板弯曲边界元法

文［４］导出了二维弹性力学平面问题的一类新型边界积分方程，本文将该理论和方法推广到三变量的Ｒｅｉｓｓｎｅｒ板弯曲中，给出边界场变量含广义位移和新型广义力的边界积分方程。从而边界弯矩应力张量可直接由离散边界积分方程求出。     

变厚度板弯曲的边界元分析法

由于变厚度板弯曲问题的控制分方程复杂，直接求解其基本解推导边界积分方程建立边界元分析法较为困难，本文通过引入等效荷载，等效刚度，将此问题的控制微分方程化成与普通薄板弯曲问题基本方程相同的形式，利用求解通板弯曲问题的边界元迭代求解，建立了分析变厚度板弯曲问题的蛤法，算例表明本方法理正确，精度良好。     

Reciprocal theorem method for solving the problems of bending of thick rectangular plates

ＲＥＣＩＰＲＯＣＡＬＴＨＥＯＲＥＭＭＥＴＨＯＤＦＯＲＳＯＬＶＩＮＧＴＨＥＰＲＯＢＬＥＭＳＯＦＢＥＮＤＩＮＧＯＦＴＨＩＣＫＲＥＣＴＡＮＧＵＬＡＲＰＬＡＴＥＳＦｕＢａｏ－ｌｉａｎ（付宝连）Ｔａｎｗｅｎ－ｆｅｎｇ（谭文锋）（ＹａｎｓｈａｎＵｎｉｒｅｒｓｉｔ...