Rapid and sensitive separation of trace level protein digests using microfabricated devices coupled to a quadrupole--time-of-flight mass spectrometer

The application of microfabricated devices coupled to a quadrupole time-of-flight mass spectrometer (Qq-TOF-MS) is presented for the analysis of trace level digests of gel-isolated proteins. In order to enhance the sample loading for proteomics analyses, two different on-chip sample preconcentration techniques were evaluated. First, a sample stacking procedure that used polarity switching to remove the sample buffer prior to zone electrophoresis was easily integrated on the microfabricated devices. With the present chip design, this preconcentration technique provided up to 70 nL sample injection with sub-nM detection limits for most peptide standards. For applications requiring larger sample loading, a disposable adsorption preconcentrator using a C18 membrane is incorporated outside the chip. This preconcentration method yielded lower peptide recoveries than that obtainable with sample stacking, and provided a convenient means of injecting several microL of sample with detection limits of typically 2.5 nM for hydrophobic peptides. The analytical merits of both sample enrichment approaches are described for the identification of bands isolated from two-dimensional (2-D) gel separation of protein extracts from Haemophilus influenzae. Accurate molecular mass measurements (< 5 ppm) in peptide mapping experiments is obtained by introducing an internal standard via a post-separation channel. Rapid identification of trace level peptides is also demonstrated using on-line tandem mass spectrometry and database searching with peptide sequence tags.     

Capillary electrophoresis/tandem mass spectrometry for analysis of proteins from two-dimensional sodium dodecyl sulfate polyacrylamide gel electrophoresis

Capillary electrophoresis/time-of-flight mass spectrometry(CE/TOFMS) has been used for analysis of in-gel digests of protein spots excised from two-dimensional sodium dodecyl sulfate polyacrylamide gel electrophoresis (2-D SDS-PAGE). An off-line purification and preconcentration procedure with a Zip Tip is used before CE/TOFMS analysis which allows for detection of protein spots with <1 picomole of material from 2-D gels. The off-line procedure provides sufficient purification for analysis while maintaining the quality of the CE separation. Using this procedure, several proteins from Coomassie Blue and zinc negatively stained gels are identified by the peptide maps generated and database searching. CE/TOF tandem mass spectrometry is used for the confirmation of database searching results and structural analysis of peptides that do not match the expected peptide maps obtained from the database in order to identify structural modifications. Several modifications were pinpointed and identified by this method.     

LC-nanospray-MS/MS analysis of hydrophobic proteins from membrane protein complexes isolated by blue-native electrophoresis

The application of two-dimensional electrophoresis for the identification of hydrophobic membrane proteins is principally hampered by precipitation of many of these proteins during first-dimension, isoelectric focusing. Therefore new strategies towards the identification and characterization of membrane proteins are being developed. In this work we present a direct and rapid approach from blue-native gels to mass spectrometry, which allows the analyses of complete complexes and prevents protein aggregation of hydrophobic regions during electrophoresis. We combine blue-native gel electrophoresis and liquid chromatography--nanospray-iontrap tandem mass spectrometry to analyze the composition of oxidative phosphorylation complexes I, III, IV and V from bovine-heart mitochondria as a model system containing a number of highly hydrophobic proteins. Bands from blue-native gels were subjected either to in-gel or to in-solution tryptic digestion. The obtained peptide mixtures were further analyzed by liquid chromatography--tandem mass spectrometry and the corresponding proteins were identified by database search. From a total of 86 proteins, 67 protein subunits could be identified including all highly hydrophobic components, except the ND4L and ND6 subunits of complex I. We demonstrate that liquid chromatography--tandem mass spectrometry combined to blue-native electrophoresis is a straightforward tool for proteomic analysis of multiprotein complexes, and especially for the identification of very hydrophobic membrane protein constituents that are not accessible by common isoelectric focusing/sodium dodecyl sulphate gel electrophoresis.     

A simplified device for protein identification by microcapillary gradient liquid chromatography-tandem mass spectrometry

A simplified device and procedure have been developed for microcapillary gradient liquid chromatography-tandem mass spectrometry (LC-MS/MS). This procedure has proved useful in identifying low level quantities of proteins from sodium dodecyl sulfate-polyacrylamide gel electrophoresis (SDS-PAGE) gel bands. Microelectrospray needles are packed with reversed-phase resin and function both as a high performance liquid chromatography (HPLC) column and a nanospray mass spectrometer tip when interfaced between an HPLC and ion trap mass spectrometer. Variable submicroliter flow rates are generated by flow splitting between the microelectrospray capillary and an HPLC system. A manual injector is used to inject a protein digest mixture that binds to the column and is then washed at a high flow rate (2 microL/min post split). Gradient elution of bound peptides was initiated by the injection of a filled loop of 70% v/v methanol (5 microL) concomitant with a reduction of flow rate (0.1 microL/min post split). This forms a diffusion-dependent gradient of variable length (typically 15-30 min in length) depending upon the final flow rate. Chromatographic separations of a standard solution digest demonstrate that this diffusion-dependent gradient provides reasonable separations such that multiple peptide identifications by MS/MS can be obtained. Application of this methodology to the analysis of several in-gel-digested gel-separated proteins is presented to demonstrate its utility.     

Accelerated proteolysis in alternating electric fields for peptide mapping

Sinusoidal alternating voltages (typically 5 V) were employed to enhance the efficiency of proteolysis for peptide mapping in this work. Protein solutions containing trypsin were allowed to digest with the assistance of alternating electric fields (AEFs) between a pair of platinum wire electrodes in Eppendorf tubes. The feasibility and performance of the novel proteolysis approach were investigated by the digestion of several standard proteins. It was demonstrated that AEFs significantly accelerated in-solution proteolysis and the digestion time was substantially reduced to 5 min. The digests were identified by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF-MS) with sequence coverages that were comparable to those obtained by using conventional 12-h in-solution proteolysis. The suitability of AEF-assisted proteolysis to real protein samples was demonstrated by digesting and identifying human serum albumin in gel separated from human serum by sodium dodecyl sulphate/polyacrylamide gel electrophoresis (SDS-PAGE). The present proteolysis strategy is simple and efficient and will find a wide range of applications in protein identification.     

Mapping the phosphorylation sites of proteins using on-line immobilized metal affinity chromatography/capillary electrophoresis/electrospray ionization multiple stage tandem mass spectrometry

On-line immobilized metal affinity chromatography/capillary electrophoresis/electrospray ionization-mass spectrometry (IMAC/CE/ESI-MS) offers selective preconcentration of phosphorylated peptides with identification of the phosphorylated amino acid(s). The preconcentration provides low concentration limits of detection and capillary electrophoresis separates the peptides. Recently, we reported a fast, simple, and sensitive on-line IMAC/CE/ESI-MS/MS method for the determination of phosphopeptides at low-pmole levels. That work is expanded here by use of multiple stage tandem mass spectrometry (MS(n), n = 2,3) to isolate and fragment target ions to provide more reliable assignments of phosphorylated residues. The application of IMAC/CE/ESI-MS(n) is demonstrated by the analysis of tryptic digests of alpha- and beta-casein and in-gel tryptic digests of beta-casein.     

Automatic internal calibration in liquid chromatography/Fourier transform ion cyclotron resonance mass spectrometry of protein digests

Accurately measured peptide masses can be used for large-scale protein identification from bacterial whole-cell digests as an alternative to tandem mass spectrometry (MS/MS) provided mass measurement errors of a few parts-per-million (ppm) are obtained. Fourier transform ion cyclotron resonance (FTICR) mass spectrometry (MS) routinely achieves such mass accuracy either with internal calibration or by regulating the charge in the analyzer cell. We have developed a novel and automated method for internal calibration of liquid chromatography (LC)/FTICR data from whole-cell digests using peptides in the sample identified by concurrent MS/MS together with ambient polydimethylcyclosiloxanes as internal calibrants in the mass spectra. The method reduced mass measurement error from 4.3 +/- 3.7 ppm to 0.3 +/- 2.3 ppm in an E. coli LC/FTICR dataset of 1000 MS and MS/MS spectra and is applicable to all analyses of complex protein digests by FTICRMS.     

Ion-permeable membrane for on-chip preconcentration and separation of cancer marker proteins

Cancer marker proteins have been electrophoretically concentrated and then separated in a microfluidic device. On-chip preconcentration was achieved using an ion-permeable membrane, consisting of acrylamide, N,N'-methylene-bisacrylamide and 2-(acrylamido)-2-methylpropanesulfonate. This negatively charged membrane was photopolymerized in the microdevice near the injection intersection. Anionic proteins were excluded from the porous membrane based on both size and charge, which concentrated target components in the injection intersection prior to separation by microchip capillary electrophoresis (μ-CE). Bovine serum albumin was used in the initial characterization of the system and showed a 40-fold enrichment in the μ-CE peak with 4 min of preconcentration. Adjustment of buffer pH enabled baseline resolution of two cancer biomarkers, α-fetoprotein (AFP) and heat shock protein 90 (HSP90), while fine control over preconcentration time limited peak broadening. Our optimized preconcentration and μ-CE approach was applied to AFP and HSP90, where enrichment factors of >10-fold were achieved with just 1 min of preconcentration. Overall, the process was simple and rapid, providing a useful tool for improving detection in microscale systems.     

On-line preconcentration of protein in capillary electrophoresis with an end-column cellulose acetate-based porous membrane

A simple on-line preconcentration method of protein for capillary electrophoresis (CE) using a cellulose acetate (CA)-coated porous membrane was proposed. CA membrane is fabricated at one of the ends of the column that allows the passage of buffer ions but excludes larger protein molecules. Protein sample is continuously electrokinetically loaded and trapped by the membrane. When injection is completed, the direction of the electric field is switched and the trapped proteins are then separated by conventional CE procedure. The results achieved showed that the preconcentration mechanism of this method was based on size-exclusion effect. Bovine serum albumin (BSA) was used for model protein sample, and signal enhancement of 550-fold with 15 min injection time was achieved.     

Automation of nanoflow liquid chromatography-tandem mass spectrometry for proteome and peptide profiling analysis by using a monolithic analytical capillary column

An automated nano-LC-MS/MS platform without trap column was established, which only used a 20 cm lauryl methacrylate-ethylene dimethacrylate (LMA-EDMA) monolithic capillary column to allow preconcentration and separation of peptides. The monolithic column had the advantages of good permeability and low backpressure resulting in higher flow rates for capillary columns. Tryptic digests of bovine albumin and yeast protein extract were tested using the monolithic column system. High proteomic coverage using this approach were demonstrated in this study. Furthermore, peptide samples extracted from mouse liver were separated by using the monolithic column system combined with size-exclusion chromatography prefractionation. This monolithic column system might be a promising alternative for the automated system previously using a trap column for routine proteome and peptide profiling analysis.     

High accuracy mass measurement of peptides with internal calibration using a dual electrospray ionization sprayer system for protein identification

A dual-ESI-sprayer system was constructed and applied to achieve high accuracy of peptide mass measurement for protein identification by means of peptide mapping. Sample was introduced in one sprayer, and reference in the other, thus making internal calibration possible greatly enhancing the mass accuracy. Several samples were utilized to evaluate the reliability of this dual-ESI-sprayer system. The range of mass errors was 0.16-5.37 ppm. The peptide masses of tryptic digests of myoglobin (horse) were measured by the HPLC/dual-ESI-MS system, with mass deviations ranging from 0.01-7.67 ppm, and about 75% mass deviations below 5 ppm with 40% below 1[?]ppm. These peptide masses were utilized to perform database searching for protein identification, and compared to results obtained by external calibration. This comparison showed that the internal calibration provides a more reliable method of protein identification, with a much smaller number of required peptides for matching, and with less CPU time consumed for database searching.     

Automatic poisson peak harvesting for high throughput protein identification

High throughput identification of proteins by peptide mass fingerprinting requires an efficient means of picking peaks from mass spectra. Here, we report the development of a peak harvester to automatically pick monoisotopic peaks from spectra generated on matrix-assisted laser desorption/ionisation time of flight (MALDI-TOF) mass spectrometers. The peak harvester uses advanced mathematical morphology and watershed algorithms to first process spectra to stick representations. Subsequently, Poisson modelling is applied to determine which peak in an isotopically resolved group represents the monoisotopic mass of a peptide. We illustrate the features of the peak harvester with mass spectra of standard peptides, digests of gel-separated bovine serum albumin, and with Escherictia coli proteins prepared by two-dimensional polyacrylamide gel electrophoresis. In all cases, the peak harvester proved effective in its ability to pick similar monoisotopic peaks as an experienced human operator, and also proved effective in the identification of monoisotopic masses in cases where isotopic distributions of peptides were overlapping. The peak harvester can be operated in an interactive mode, or can be completely automated and linked through to peptide mass fingerprinting protein identification tools to achieve high throughput automated protein identification.     

Two-dimensional gel electrophoresis/matrix-assisted laser desorption/ionisation mass spectrometry of a milk powder

Proteins in a commercial milk powder have been separated by two-dimensional gel electrophoresis and analysed by matrix-assisted laser desorption ionisation mass spectrometry. The mass spectrometric analyses were conducted in two steps: analysis of the intact proteins following their passive extraction into a suitable solvent mixture and analysis in reflectron mode of in situ digests of a number of gel spots. The combination of the two methods allowed a reliable identification of a number of proteins, including nine caseins as well as certain protein modifications including single/multiple phosphorylation, lactose-protein conjugates and Coomassie Brilliant Blue adducts. Analyses of the intact proteins prior to their in situ digestion contributed to a more efficient and reliable consultation of protein databases.     

HPLC-chip-mass spectrometry for protein signature identifications

This work investigates the use of an HPLC-chip microfluidic device interfaced to an IT mass spectrometer to search for biomarker signatures. To that end, the identification of autoantigens is chosen as a model. It not only constitutes a proof of concept model but also the growing interest in autoantibodies and autoantigens as new markers of diseases provides a practical application at the same time. The peptides are separated by the HPLC-chip system allowing suitable resolution and reproducibility. The determination of two parameters that characterize a peptide sequence during LC-MS/MS analyses, retention time (RT) and m/z ratio, improves the identification of a number of peptides derived from protein digests. These findings illustrate that accurate RT measurement obtained in a microfluidic device is useful to obtain mass/retention time (MRT) pairs for a given peptide, which can contribute to the definition of biomarker signatures.     

Prevention of artifactual protein oxidation generated during sodium dodecyl sulfate-gel electrophoresis

Prevention of artifactual protein oxidation occurring during sodium dodecyl sulfate (SDS) acrylamide gel electrophoresis is critical for identifying physiological protein oxidation implicated in human diseases due to the routine use of gel electrophoresis to separate the multiple proteins in proteomic studies. To develop a methodology that completely prevents artifactual protein oxidation in SDS acrylamide gel electrophoresis, cytochrome c was electrophoresed on polyacrylamide gels and subjected to trypsin in-gel digestion followed by tryptic peptide analysis by mass spectrometry. It was found that degassing the acrylamide solution to remove molecular oxygen prior to gel polymerization is a crucial process to protect the electrophoresed protein from reactive oxygen species generated during electrophoresis. However, significant artifactual protein oxidation remains that can only be eliminated entirely, if proteins are electrophoresed on an SDS gel photopolymerized with flavin as the photoinitiator and thioglycolate included in the cathode buffer as a reactive oxygen species scavenger. Using this combination of methodologies, cytochrome c isolated from adult rat heart mitochondria was purified and digested followed by mass spectrometric analysis, demonstrating the requisite high resolution of the polyacrylamide gel and the entire elimination of artifactual oxidation.     

A robust approach for the analysis of peptides in the low femtomole range by capillary electrophoresis-tandem mass spectrometry

A capillary electrophoresis-tandem mass spectrometry (CE-MS/MS) approach has been developed for routine application in proteomic studies. Robustness of the coupling is achieved by using a standard coaxial sheath-flow sprayer. Thereby, greater stability than nanoelectrospray ionization-mass spectrometry coupling of sheathless capillary electrophoresis or nanoliquid chromatography (nano-LC) is achieved, resulting in stable operation for several weeks and unattended overnight sequences. The applied sheath flow is reduced to 1-2 microL/min in order to increase sensitivity. Standard peptides and those of digests of standard proteins and gel-separated proteins can be detected in the low femtomole range (full scan and MS/MS). Detection limits are found to be as low as 500 amol. Low femtomole amounts are required for unequivocal identification by MS/MS experiments in the ion trap and subsequent database search. By applying a simple pH-mediated stacking the concentration sensitivity can be lowered to some tens of fmol/microL (nM), depending on capillary size. This sensitivity is close to published values for sheathless CE-MS and nano-LC-MS, respectively (a comparison to reference values is presented). Moreover, with capillaries of about 50 cm in length separations in less than 10 min are possible resulting in a throughput of up to four analyses per hour. This is a factor of 4-12 times faster than nano-LC separation, being the state-of-the-art techniques for proteomic studies.     

Fourier transform ion cyclotron resonance mass spectrometry with NanoLC/microelectrospray ionization and matrix-assisted laser desorption/ionization: analytical performance in peptide mass fingerprint analysis

Protein identifications by peptide mass fingerprint analyses with Fourier transform ion cyclotron resonance mass spectrometry (FT-ICR MS) were performed using microelectrospray ionization coupled to nano liquid chromatography (NanoLC), as well as using matrix-assisted laser desorption/ionization (MALDI). Tryptic digests of bovine serum albumin (BSA), diluted down to femtomole quantities, have been desalted by fast NanoLC under isocratic elution conditions as the high resolving power of FT-ICR MS enables peptides to be separated during the mass analysis stage of the experiment. The high mass accuracy achieved with FT-ICR MS (a few ppm with external calibration) facilitated unambiguous protein identification from protein database searches, even when only a few tryptic peptides of a protein were detected. Statistical confidence in the database search results was further improved by internal calibration due to increased mass accuracy. Matrix-assisted laser desorption/ionization and micro electrospray ionization (ESI) FT-ICR showed good mass accuracies in the low femtomole range, yet a better sensitivity was observed with MALDI. However, in higher femtomole ranges slightly lower mass accuracies were observed with MALDI FT-ICR than with microESI FT-ICR due to scan-to-scan variations of the ion population in the ICR cell. Database search results and protein sequence coverage results from NanoLC FT-ICR MS and MALDI FT-ICR MS, as well as the effect of mass accuracy on protein identification for the peptide mass fingerprint analysis are evaluated.     

A comparison of silver stain and SYPRO Ruby Protein Gel Stain with respect to protein detection in two-dimensional gels and identification by peptide mass profiling

Proteomic projects are often focused on the discovery of differentially expressed proteins between control and experimental samples. Most laboratories choose the approach of running two-dimensional (2-D) gels, analyzing them and identifying the differentially expressed proteins by in-gel digestion and mass spectrometry. To date, the available stains for visualizing proteins on 2-D gels have been less than ideal for these projects because of poor detection sensitivity (Coomassie blue stain) or poor peptide recovery from in-gel digests and mass spectrometry (silver stain), unless extra destaining and washing steps are included in the protocol. In addition, the limited dynamic range of these stains has made it difficult to rigorously and reliably determine subtle differences in protein quantities. SYPRO Ruby Protein Gel Stain is a novel, ruthenium-based fluorescent dye for the detection of proteins in sodium dodecyl sulfate-polyacrylamide gel electrophoresis (SDS-PAGE) gels that has properties making it well suited to high-throughput proteomics projects. The advantages of SYPRO Ruby Protein Gel Stain relative to silver stain demonstrated in this study include a broad linear dynamic range and enhanced recovery of peptides from in-gel digests for matrix assisted laser desorption/ionization-time of flight (MALDI-TOF) mass spectrometry.     

Specific capture of phosphopeptides on matrix-assisted laser desorption/ionization time-of-flight mass spectrometry targets modified by magnetic affinity nanoparticles

Specific capture of phosphopeptides from protein digests is a critical step for identification of phosphoproteins by mass spectrometry. In this study, we report a novel phosphopeptide-capture approach based on the specific interaction of phosphopeptides with a stainless steel target modified with magnetic affinity nanoparticles. The modification which was carried out by loading the suspension of nanoparticles into sample wells of the target did not require any pretreatment procedure to the target and did not involve chemical binding reactions. To isolate phosphopeptides, digests were loaded into the wells of the modified target for 10 min incubation, followed by rinsing with washing buffer to remove unbound species; matrix was then added to the captured phosphopeptides prior to analysis by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOFMS). Capturing the phosphopeptides on the modified target simplified significantly analytical operations and reduced sample loss. This approach has been applied to solution digests of alpha-casein, beta-casein, and a mixture of five proteins; a number of phosphopeptides were confidently detected. Phosphopeptides from digests of 10 fmol beta-casein could be isolated and detected by MALDI-TOFMS with this method. In addition, this approach has been applied successfully to the isolation of phosphopeptides from in-gel digestive products of sub-pmol phosphoproteins after separation by sodium dodecyl sulfate/polyacrylamide gel electrophoresis (SDS-PAGE).