Coordination compounds of biological interest: Thermal properties of some compounds of saccharin (o-benzoic sulphimide) with nickel(II) and zinc(II)

The thermal properties of nickel(II) and zinc(II) complexes of saccharin (sacc) (o-benzoic sulphimide) have been studied and compared both with those of cobalt(II) and copper(II) previously studied and with those of ternary complexes of nickel(II) and zinc(II) having both saccharin and pyridine as ligands. The thermal behaviour is discussed in terms of the interaction between metal and ligands, interaction studied by IR spectroscopy, and by reflectance spectroscopy.The classical thermal stability scale Co(II) > Ni(II) > Cu(II) > Zn(II) is always obtained.     

Synthesis of porous vinylnaphthalene/divinylnaphthalene copolymers and their sorptive properties towards phenol and its derivatives

Four porous vinylnaphthalene/divinylnaphthalene (VN/DVN) polymers having three different nominal crosslinking degrees (60, 80 and 100 wt.%) have been synthesized using the suspension polymerization method in the presence of toluene and decane.The use of various crosslinking levels and inert diluents was aimed at changing the extent of polymeric network-diluent interactions. The resultant polymers have specific surface area in the range 450-700 m²/g depending on the DVN content. Two sets of pores were detected in all resins: one with the diameter of ≈2 nm and the second one in the range of 30-40 nm. Their sorptive properties have been studied using dilute (0.5 mmol/l) solutions of phenol and its derivatives (o-chlorophenol, 2-methylphenol, o-nitrophenol, m-nitrophenol and p-nitrophenol). It has been found that sorption, at low equilibrium concentration, follows the order: o-nitrophenol > o-chlorophenol > m-nitrophenol > o-methylphenol > p-nitrophenol > phenol. Full characteristics of the porous structure of resultant polymers was obtained by nitrogen adsorption at 77 K and their surface properties analyzed using Inverse Gas Chromatography.     

Coordination compounds of biological interest: thermal properties of some compounds of saccharin (o-benzoic sulfimide) with divalent metal ions

The thermal properties of cobalt(II) and copper(II) complexes of saccharin (sacc) (o-benzoic sulfimide) have been studied, and are compared with those of ternary complexes of cobalt(II) and copper(II) having both saccharin and pyridine as ligands. The thermal behaviour is discussed in terms of the bonds between the central ion and the ligands. The frequency shifts of the carbonyl and sulfonyl groups support the hypotheses derived from the thermal data. The thermal stability scale CO(II) /s> Cu(II) is always obtained while the stability constant scale is CO(II) < Cu(II).     

Acute Toxicity of Cresols to Pseudomonas — An Initial Oxygen Uptake Method

Acute toxicity of cresols to both Pseudomonas I and II was estimated by an initial oxygen uptake method. Inhibition studies of toluene and cresols on the oxidation of either benzoate by Pseudomnas I or phenol by Pseudomonas II were analyzed and expressed as oxygen uptake rates. Double reciprocal plots for the inhibiton by cresols of oxygen uptake in Pseudomonas, two physical constants, Vmaxi and Ki, were obtained. The Vmaxi of o?, m? and p-cresol were 80%, 81% and 57% of Vmax in Pseudomnas I, and 10%, 25% and 36% in Pseudomonas II, respectively. Thus, the toxicity to Pseudomonas I decreases in the order p- > o- ≥ m-cresol, whereas to Pseudomonas II, the order is changed to o- > m- > p-cresol. This difference in the toxicity order is probably due to the allosteric effect of p-cresol towards Pseudomonas II. Inasmuch as most compounds inhibit noncompetively, the relative toxicity of different compounds can be estimated by a new toxicity parameter RI (relative inhibition) which is defined as 100/Ki. By comparing the RI value of each compound, the toxicity to Pseudomonas I decreases in the order m-chlorophenol > p-cresol > p-chlorophenol > o-cresol ≥ m-cresol > o-chlorophenol > toluene > phenol.     

Novel Copolymers of Halogen Ring Substituted 2-Cyano-3-Phenyl-2-Propen- Amides and Styrene

ABSTRACT

Electrophilic trisubstituted ethylene monomers, halogen ring substituted 2-cyano-3-phenyl-2-propenamides, RC₆H₄CH=C(CN) CONH₂ (where R is o-Cl, m-Cl, p-Cl, p-Br, and p-F) were prepared by Knoevenagel condensation. Novel copolymers of the propenamides and styrene were prepared at equimolar monomer feed composition by solution copolymerization in the presence of a radical initiator at 80°C. The order of reactivity (1/r ₁) for the monomers (M₁=styrene) was o-Cl (1.42) > p-F (1.19) > p-Cl (0.70) > m-Cl (0.60) > p-Br (0.44).     

Synthesis of p-tert-butylcalix[4]arene semitubes and their binding studies with C60

The synthesis of p-tert-butylcalix[4]arene semitubes in one step reaction with fairly good yields is described. The structures of these compounds were confirmed by ¹H NMR, ¹³CNMR and mass spectrometry. The complexation ability of these compounds with C₆₀ was investigated and found that they are able to form 1:1 complexes. The stability constants of these complexes were determined and found to be 15, 203 and 525 dm³ mol^?1 for the semitubes 3a, 3b, 3c respectively. The binding energies of each of C₆₀, the semitubes and the complexes are calculated using PM6 (Semiempirical quantum chemical) and DFT (Density Functional Theory) methods and found in the order m > p > o. On the other hand, the calculated binding energies using DFT method showed that the stabilities of both centered and side complexes are in the order p > m > o.     

Use of an o-aminobenzoic acid-functionalized XAD-4 copolymer resin for the separation and preconcentration of heavy metal(II) ions

XAD copolymer resins may be functionalized with heavy metal ion-selective ligands either by covalent linkage to the polymer backbone or by impregnation. These resins may be tailored to be specific for certain heavy metals by adjusting the adsorption and elution parameters, thereby enabling simple and cost-effective spectrophotometric and flame atomic absorption spectrometry (FAAS) determinations of these metals without requiring the more sophisticated coupled instrumental techniques. For the synthesis of o-aminobenzoic acid (ABA)-immobilized XAD-4 copolymer resin that is expected to preconcentrate a number of transition and heavy metals, the azo-linkage method was chosen. For this purpose the copolymer was nitrated, reduced to the corresponding amine, converted to the diazonium salt with nitrite, and reacted with o-aminobenzoic acid to produce the XAD-ABA sorbent. This sorbent was capable of preconcentrating Pb(II), Cd(II), Ni(II), Co(II) and Zn(II) from weakly acidic or neutral aqueous solution. The retained metals were eluted with 1.0 M HNO₃ from the resin column, and were subsequently determinated with by flame atomic absorption spectrometry. The developed resin preconcentration and determination method was successfully applied to the analysis of a synthetic metal mixture solution, a certified reference material (CRM) of coal sample, and brackish lake water.     

DMT [(−)-(2<Emphasis Type="Italic">R</Emphasis>,3<Emphasis Type="Italic">R</Emphasis>)-2,3-dimethoxy-1,1,4,4-tetraphenylbutane-1,4-diol], a highly efficient host compound for nitroaromatic guests: selectivity,X-ray and thermal analyses

In this work, we reveal that the compound (?)-(2R,3R)-2,3-dimethoxy-1,1,4,4-tetraphenylbutane-1,4-diol (DMT) is a highly efficient host material for nitroaromatics o-nitrotoluene (o-NT), m-nitrotoluene (m-NT), p-nitrotoluene (p-NT) and nitrobenzene (NB). Each of these guests was included with a 2:1 host:guest ratio. The host displayed selectivity for p-NT and NB when these guests were mixed in equimolar proportions with any one of the other guest solvents, and the host recrystallized from this binary mixture. A selectivity order for the host in these conditions was thus noted to be NB?≈?p-NT?>?o-NT?>?m-NT. Furthermore, guests were also mixed in non-equimolar proportions and the host behaviour analysed, the results of which were in accordance with observations from the equimolar studies. Additionally, an equimolar quaternary experiment of all four guests provided a somewhat adjusted host selectivity order [p-NT (39.9%)?>?NB (30.2%)?>?m-NT (17.1%)?>?o-NT (12.8%)]. Single crystal diffraction analyses of all four complexes showed the crystals to share the same host packing, and comparable host–guest interactions were observed in each. However, thermal analyses, both DSC and TG, showed that the preferred guests p-NT and NB formed complexes with increased relative thermal stabilities, and this observation correlated with the selective behaviour of the host in competition experiments.     

A new approach to prepare high molecular weight poly(p-dioxanone) by chain-extending from dihydroxyl terminated propolymers

As poly(p-dioxanone) (PPDO) with a high molecular weight (viscosity-average molecular weight (M_ν) > 100,000 g/mol) is not easy to be obtained in a short time, a new approach has been developed to produce high molecular weight poly(p-dioxanone) (HPPDO-T) by chain-extending reaction of hydroxyl-terminated PPDO (HPPDO) prepolymers using toluene-2,4-diisocyanate (TDI) as chain extender. Here HPPDO prepolymers were synthesized via ring-opening polymerization of p-dioxanone (PDO) monomer initiated by 1,4-butanediol (BD) with Stannous octoate (SnOct₂) as catalyst. The resulting polymers, having a highest M_ν of 250,000 g/mol, were characterized by ¹H NMR, TG, DSC and WXRD. HPPDO prepolymers can react with TDI more effectively than the PPDO prepolymers initiated by mono-functional initiators, and the molecular weights of resulting chain-extended products increase several decade times in an hour comparing to the prepolymers. The chain extended products HPPDO-T have better thermal stability, and higher glass transition temperatures and lower crystallization rates than PPDO homopolymer.     

Prediction of solvents extraction-the organochlorine pesticides in soil using solubility parameter

Prediction of the optimal extraction solvent based on the solubility parameter to extract the typical organochlorine pesticides from Jiangxi red soil was reported in this paper. Hildebrand solubility parameters, including dispersion coefficient (δ_d), polarity (δ_p) and hydrogen bonding (δ_h), of extraction solvents (including hexane, dichloromethane, hexane/methanol (4:1, v/v), hexane/acetone (1:1, v/v), hexane/dichloromethane (1:1, v/v) and organochlorine pesticides were calculated using group contribution method. The solvents, such as hexane/methanol (4:1, v/v) and hexane/acetone (1:1, v/v) were selected as ideal extraction solvents to extract o,p′-DDT o,p′-DDE and o,p′-DDD with high recoveries (>82%), furthermore, these solvents can be used to extract α-endosulfan, Endrin and HCB with the reliable recoveries (>75%). The estimated finding by solubility parameters was supported by the results of soxhlet extraction.     

Excess volumes of mixing of 1,2-dichloroethane and aromatic hydrocarbons

Excess volumes of mixing, V^E, for binary mixtures of 1,2-dichloroethane with benzene, toluene, o^?, m^?, and p-xylenes have been determined at 308.15 K over the complete composition range. V^E is positive for all these mixtures and varies in the order m-xylene >o-xylene >p-xylene > benzene > toluene. The experimental data have been analyzed in terms of the Prigogine's average potential cell model coupled with Balescu's theory. The calculated V^E values do not agree with the corresponding experimental values.     

A study of the interaction energy between a glycoluril molecular clip and dihydroxybenzenes or diaminobenzenes: a justification for easy separation by affinity chromatography

Theoretical calculations were performed to determine the interaction energy between a glycoluril (GL) molecular clip and hydroxybenzenes (HBs) and aminobenzenes (ABs). The theoretical calculations on the GL and its interactions were carried out using the hybrid functional closed-shell RB3LYP and the 6-31G* basis set, employing gaussian 03. The stability in energy of the guest inside the GL, ΔE_T(1), was in the following order: m-DHB-GL > o-DHB-GL > m-THB-GL > m-DAB-GL > o-THB-GL. The geometric parameters, in particular the bond lengths are discussed for the host molecule GL and guest molecules DHB and DAB and their parameters are compared with the host-guest molecules DHB-GL and DAB-GL, respectively.     

Three novel trinuclear zinc(II)/nickel(II) complexes with pentadentate ligands N-nitrobenzoylsalicylhydrazidate

Three trinuclear zinc(II)/nickel(II) complexes with two pentadentate ligands, N-p-nitrobenzoylsalicylhydrazidate (H₃-p-nbzshz) and N-o-nitrobenzoylsalicylhydrazidate (H₃-o-nbzshz) have been synthesized and characterized by X-ray crystallography. The complex [Zn₃(p-nbzshz)₂(C₅H₅N)₄]_n (1) molecule exhibits a one-dimensional wave-like chain structure resulting from the linkage of phenolate oxygen donor atoms of the ligands between neighboring motifs. The two nickel(II) complexes, Ni₃(p-nbzshz)₂(C₅H₅N)₄ (2) and Ni₃(o-nbzshz)₂(C₃H₇NO)₂(C₂H₆O)₂ (3) are trinuclear complexes in which three nickel(II) centers exhibit alternating square-planar and octahedral geometries. Complex 2 exhibits a curved Ni₃ metal arrangement with a Ni(1)–Ni(2)–Ni(3) angle of 62.36°, while the three nickel atoms in complex 3 are strictly linear with an angle of 180°.     

Effect of Plasma Deposition Using Low-Power/Non-thermal Atmospheric Pressure Plasma on Promoting Adhesion of Composite Resin to Enamel

This study investigated the effect of monomer deposition through a low-power, non-thermal atmospheric pressure plasma (NT-APP) on adhesion of resin composite to enamel and its durability. The adhesion of resin composite to enamel and its durability were compared using micro-shear bond strength (MSBS) tests, with or without monomer deposition and before or after thermocycling (TC). The bond strength data were interpreted using Weibull analysis. Hydrophilicities of treated ceramic surfaces were compared with contact angle measurements. Surface characterization was performed with a Fourier transform infra-red spectrophotometer and X-ray photoelectron spectroscopy. The fracture mode at the interface was evaluated using a stereomicroscope and a scanning electron microscope. The plasma polymer deposition of benzene and 1,3-butadiene using the low-power NT-APP improved the MSBS of resin composite to enamel (p < 0.05). Surface characterization suggested improved wettability and changes in the chemical composition of the plasma-deposited enamel surface. However, the mean values of the MSBS of the plasma polymer-deposited groups decreased after TC (p < 0.05). After TC, the Weibull modulus (m) values increased in all the groups, especially in the plasma polymer-deposited groups. Plasma polymer deposition improved enamel adhesion but failed to improve durability in terms of mean bond strength. However, the plasma polymer deposition increased the Weibull modulus m after TC, which indicated that the scatter of the bond strength was narrowed with respect to durability.     

A comparison of the relative energies of isomeric intermediates formed in electrophilic,radical, and nucleophilic aromatic substitution reactions

The relative energetics of isomeric σ-complex intermediates formed in electrophilic, free radical, and nucleophilic attack of Cl, H, and Me on PhCl and PhMe are compared for all positions: o, m, p, and ipso. The results are presented as ΔH, computed by the MINDO/3 method, for the appropriate isodesmic reaction with benzene. For the chlorobenzene intermediates, there is a marked increase in the relative preference for the ipso-position as the reactions change from electrophilic to free radical to nucleophilic. For toluene intermediates, the order of stability-p > o > m > ipso-is seen in all reactions except for one case, free radical methylation. In general, the free radical intermediates show the smallest range of energy differences. Comparison of predictions from these calculations with experimental results (largely partial rate factors and product ratios) shows some qualitative agreement.     

Solid-phase spectrophotometric determination of nickel in water and vegetable samples at sub-mug l(-1) level with o-carboxylphenyldiazoaminoazobenzene loaded XAD-4

A highly sensitive and selective solid-phase spectrophotometric method for the determination of sub-μg l⁻¹ level nickel(II) is described. Nickel(II) was sorbed on a styrene-divinylbenzene-type resin Amberlite XAD-4 as a Ni(II)-o-carboxylphenyldiazoaminoazobenzene (o-CDAA) complex. At pH 9.0, resin phase absorbances at 588 and 800 nm were measured directly with an apparent molar absorptivity of 2.95×10⁷ g mol⁻¹ cm⁻¹. The linear range of the determination was 1.2-41 μg g⁻¹ resin. The detection limit and the quantification limit were found to be 0.24 and 0.76 μg g⁻¹ resin, respectively. The relative standard deviation of 10 replicate determinations of 1.0 μg nickel(II) in 100 ml sample was of 1.5%. The tolerance limit of coexistent ions was also investigated. Most of them are in tolerable amount. For practical analyses, 1 ml acetylacetone used can eliminate the interferences caused by Cu and Fe. The procedure was validated by analysis a certified water reference material (GBW 08618 Beijing, China) and a tomato leaf certified reference material (GBW 08402 Beijing, China) with the results in agreement with the certified values. The method was applied to the determination of nickel(II) in water and vegetable samples with satisfactory results.     

Determination of mercury species with a resin functionalized with a 1,2-bis(o-aminophenylthio)ethane moiety

A method for the simultaneous preconcentration and determination of Hg(II) and MeHg(I) at the ng ml⁻¹ level has been developed. This method is based on solid phase extraction using a newly synthesized chelating resin containing nitrogen and sulphur donor sites of the 1,2-bis(o-aminophenylthio)ethane moiety that is very selective for mercury. The characterization of the resin has been carried out by elemental analyses, infrared spectral data, thermogravimetric analysis and metal ion capacities. The resin is highly selective for Hg(II) and MeHg(I) with an exchange capacity of 0.38 and 0.30 mmol g⁻¹, respectively. Various parameters like pH, column flow rate, desorbing agents are optimized. Cold vapour atomic absorption spectrometry (CVAAS) was used to measure the concentration of both species of mercury. The calibration graph was linear upto 10 ng ml⁻¹ with a 3σ detection limit of 0.09 ng ml⁻¹. The recovery of Hg(II) and MeHg(I) was found to be 98.9±2.0 and 98.0±1.1%, respectively. The method has been used for routine determination of trace levels of mercury species in natural waters to comply with more stringent regulations.     

Cationic oligomerization and polymerization of some propenylbenzene derivatives

A comparative study was undertaken of the cationic oligomerization/polymerization of the natural propenylbenzene derivatives, anethole, isoeugenol, and isosafrole, together with synthetic o-methoxypropenylbenzene and N,N-dimethyl-p-propenylaniline using boron trifluoride diethyletherate as catalyst. Two (optimum) reaction temperatures were employed, ?12 and ?45°C, and only the (E) isomers of the monomers were studied. The order of reactivity of the monomers was found to be anethole > isoeugenol > isosafrole > o-methoxypronylbenzene as measured by following the rate of loss of monomer by proton magnetic resonance spectrometry at ?12°C. N,N-dimethyl-p-propenylaniline only appeared to form a complex with the catalyst. Low-molecularweight polymeric materials were prepared from anethole, isosafrole, and isoeugenol at ?45°C using the same catalyst while o-methoxypropenylbenzene formed oligomers. Isosafrole was recovered unchanged when treated with the boron trifluoride diethyl etherate initiator system at ?78°C in an attempt to increase the molecular weight of the polyisosafrole.     

Studies on the cationic polymerization of o-methylstyrene

The polymerization of o-methylstyrene by H₂SO₄, AlBr₃, or BF₃,Et₂O gave polymers showing i.r. spectra identical to that of a polymer formed by thermal polymerization. It follows that the cationic polymerization of this monomer proceeds normally, i.e. without isomerization, as is the case for the cationic polymerizations of p-methyl-, p-isopropyl-, and o-isopropylstyrenes.     

NOVEL COPOLYMERS OF TRISUBSTITUTED ETHYLENES WITH STYRENE. I. 2-HALOPHENYL-1,1-DICYANOETHYLENES

Electrophilic trisubstituted ethylene monomers, 2-halophenyl-1,1-dicyanoethylenes, RC₆H₄CH=C(CN)₂ (where R is o-Cl, m-Cl, p-Cl, p-Br, and p-F) were prepared and copolymerized with styrene. The monomers were synthesized by the piperidine catalyzed Knoevenagel condensation of ring-substituted benzaldehydes and malononitrile, and characterized by CHN elemental analysis, IR, ¹H and ¹³C-NMR. All the ethylenes were copolymerized with styrene (M₁) in solution with radical initiation (AIBN) at 70°C. The compositions of the copolymers were calculated from nitrogen analysis and the structures were analyzed by IR, ¹H and ¹³C-NMR. The order of relative reactivity (1/r ₁) for the monomers is p-Cl (14.8) >m-Cl (2.67)> o-Cl (1.82) > p-Br (1.52) > p-F (1.36). High T _g's of the copolymers (> 150°C) in comparison with that of polystyrene indicate a substantial decrease in the chain mobility of the copolymers due to the high dipolar character of the trisubstituted monomer unit. Gravimetric analysis indicated that the copolymers decompose in the range 300–400°C.