Determination of benzo[a]pyrene in cigarette mainstream smoke by using mid-infrared spectroscopy associated with a novel chemometric algorithm

Determination of benzo[a]pyrene (BaP) in cigarette smoke can be very important for the tobacco quality control and the assessment of its harm to human health. In this study, mid-infrared spectroscopy (MIR) coupled to chemometric algorithm (DPSO-WPT-PLS), which was based on the wavelet packet transform (WPT), discrete particle swarm optimization algorithm (DPSO) and partial least squares regression (PLS), was used to quantify harmful ingredient benzo[a]pyrene in the cigarette mainstream smoke with promising result. Furthermore, the proposed method provided better performance compared to several other chemometric models, i.e., PLS, radial basis function-based PLS (RBF-PLS), PLS with stepwise regression variable selection (Stepwise-PLS) as well as WPT-PLS with informative wavelet coefficients selected by correlation coefficient test (rtest-WPT-PLS). It can be expected that the proposed strategy could become a new effective, rapid quantitative analysis technique in analyzing the harmful ingredient BaP in cigarette mainstream smoke.     

The determination of benzo[a]pyrene in the total particulate matter of cigarette smoke

A procedure for the isolation and determination of benzo[a]pyrene in the total particulate matter of cigarette smoke is described. Two high-pressure liquid chromatographic (HPLC) techniques are employed: a normal-phase, mu Bondapak-NH2, amino column is used for isolation of the benzo[a]pyrene fraction and a reversed-phase, Vydac 201TP54, polymeric octadecyl silane column is used for quantitation. Fluorescence detection is used in both modes of chromatography. The wavelengths of excitation and emission are evaluated for analytical detection. Extraction media and various isolation techniques are compared for their extraction efficiency and isolation from interferences, respectively. The procedure is efficient, reproducible, sensitive (3 pg), and gives results that compare favorably with other techniques reported in the literature for the B[a]P content of reference cigarettes, 1R1 and 1R4F.     

Analytical study of cigarette smoke enriched in benzo[a]pyrene for use in model animal studies

Cigarette smoke has been significantly enriched in benzo[a]pyrene (BAP) by injecting 200 μl of a cyclohexane solution, containing a total of 40 μg of BAP, into a cigarette. After injection, the cigarette is conditioned and smoked according to standard protocol. When the cigarette smoke condensate is analyzed by fluorescence spectroscopy, liquid scintillation counting, gas chromatography with flame ionization detection, and gas chromatography-mass spectrometry, it is found that the level of BAP has increased by 1000 times with respect to levels reported for unenriched cigarette smoke. No chemical transformation of the BAP has been detected, and the BAP-enriched fraction does not appear to be perturbed to a detectable degree. Approximately 28% of the BAP is measured in the mainstream smoke, 46–48% in the sidestream smoke from the burning end of the cigarette, and 7% in the butt and ash. Correcting for analytical losses, about 10% appears to escape in the gaseous state. This material may prove suitable for model animal studies.     

High-pressure liquid chromatography of polynuclear aromatic hydrocarbons of cigarette smoke condensate

Reverse-phase, high-pressure liquid chromatography (h.p.l.c.) on Permaphase ODS and ETH was applied to the fractions of cigarette smoke condensate containing polynuclear aromatic hydrocarbons (PAH). A PAH-enriched fraction was first separated by gel filtration, and selected fractions were subjected to h.p.l.c. Although standard PAH could be easily separated on Permaphase ODS, results with smoke condensate were unsatisfactory. Better results were obtained with Permaphase ETH, which gave sufficient resolution for identification. PAH identification was aided by means of a stop-flow technique and measurement of the u.v. spectra of eluting peaks. Benzo(a)pyrene in the smoke condensate could be determined. However, for resolution of the PAH in smoke condensates, the total overall performance of h.p.l.c. was judged inferior to that of gas chromatography.     

Simultaneous determination of amino-alpha-carbolines and amino-gamma-carbolines in cigarette smoke condensate by high-performance liquid chromatography

A method for the simultaneous detection of amino-alpha-carbolines (2-amino-alpha-carboline and 2-amino-3-methyl-alpha-carboline) and amino-gamma-carbolines (3-amino-1,4-dimethyl-5H-pyrido [4,3-b]indole and 3-amino-1-methyl-5H-pyrido [4,3-b]indole) by high-performance liquid chromatography has been developed. It consists of a three-step purification using three different columns with fluorometric detection. With this method, we have demonstrated that both amino-alpha-carbolines and amino-gamma-carbolines are present in cigarette smoke condensate. The method may be useful for detecting these carcinogens in various materials.     

Determination of benzo[a]pyrene tetrols by column-switching capillary liquid chromatography with fluorescence and micro-electrospray ionization mass spectrometric detection

The present work displays capillary liquid chromatographic column switching methodology tailored for determination of benzo[a]pyrene tetrol isomers in biological matrices using on-line fluorescence and micro-electrospray ionization mass spectrometric detection. A well-established off-line crude solid phase extraction procedure was used in order to make the method compatible with several biological matrices. The solid phase extraction eluates were evaporated to dryness, redissolved in 1.0 ml methanol:water (10:90, v/v), loaded onto a 0.32 mm I.D. x 40 mm 5 microm Kromasil C(18) pre-column for analyte enrichment and back-flushed elution onto a 0.30 mm I.D. x 150 mm 3.5 microm Kromasil C(18) analytical column. The samples were loaded with a flow rate of 50 microl min(-1) and the tetrols were separated at a flow rate of 4 microl min(-1) with an acetonitrile:10 mM ammonium acetate gradient from 10 to 90%. A sample loading flow rate up to 50 microl min(-1) was allowed. The fluorescence excitation and emission were set to 342 and 385 nm, respectively, while mass spectrometric detection of the benzo[a]pyrene tetrols was obtained by monitoring their [M - H](-) molecular ions at m/z 319. The method was validated over the concentration range 0.1-50 ng ml(-1) benzo[a]pyrene tetrols in a cell culture medium with 100 microl injection volume, fluorescence detection and the first eluting tetrol isomer as model compound, resulting in a correlation coefficient of 0.993. The within-assay (n= 6) and between-assay (n= 6) precisions were determined to 2.6-8.6% and 3.8-9.6%, respectively, and the recoveries were determined to 97.9-102.4% within the investigated concentration range. The mass limit of detection (by fluorescence) was 3 pg for all the tetrol isomers, corresponding to a concentration limit of detection of 30 pg ml(-1) cell culture medium. The corresponding mass spectrometric mass limits of detection were 4-10 pg, corresponding to concentration limits of detection of 40-100 pg ml(-1) cell culture medium.     

Routine determination of benzo[a]pyrene at part-per-billion in complex industrial matrices by multidimensional liquid chromatography

A rapid and selective high performance liquid chromatography (HPLC) method using a column-switching technique has been developed for the determination of benzo[a]pyrene in complex mixtures containing polycyclic aromatic hydrocarbons. The diluted sample is directly injected into the chromatographic system without pre-treatment. The purification is performed on-line using three cleaning columns filled with various stationary phases. The sample preparation, a simple dilution, and the analysis time do not exceed 45 min. The method developed was used to analyze industrial products such as oil, bitumen, etc. and was compared with an off-line method requiring treatment and extraction steps before the analysis.     

Effects of cluster formation on spectra of benzo[a]pyrene and benzo[e]pyrene

Absorption and fluorescence emission spectra of the polycyclic aromatic hydrocarbons benzo[a]pyrene (BaP) and benzo[e]pyrene (BeP) in solution and adsorbed on silica have been obtained and compared to examine the spectroscopic effects of clustering. Molecular mechanics calculations with the UFF potential were done to optimize monomer, dimer and trimer geometries, and energy differences were determined by MP2/6-31G* calculations. Fluorescence emission spectra of adsorbed BeP and BaP display a red shift that progresses with increased loading, and the two differ in their photodegradation kinetics. The experimental and theoretical results are found to be consistent.     

Determination of benzo[a]pyrene in shale oil-by solid-surface fluorescence

A method has been developed for determining benzo[a]pyrene in shale oil by combining dry-column chromatography, thin-layer chromatography and fluorescence spectrometry. A two-step separation method was employed to isolate benzo[a]pyrene from shale oil. Benzo[a]pyrene was identified and determined by detecting its fluorescence directly from chromatoplates; as little as 0.06 ng can be detected. The limit of detection of benzo[a]pyrene in shale oil is ca. 1.2 ppm and the reproducibility of the method is ±2.6 ppm.     

Determination of formaldehyde and acetaldehyde in mainstream cigarette smoke by high-performance liquid chromatography

A method is described for the determination of formaldehyde and acetaldehyde in mainstream cigarette smoke. This involved the collection and reaction of the aldehydes with 2,4-dinitrophenylhydrazine in aqueous acetonitrile. The high-performance liquid chromatographic separation and measurement of the various components directly in this reaction solution eliminated the need for a clean-up stage. Cigarette yields of greater than 5 micrograms of formaldehyde and 50 micrograms of acetaldehyde could be determined to estimated relative standard deviations of 0.07 and 0.05, respectively.     

Quantification of benzo[a]pyrene diol epoxide DNA-adducts by stable isotope dilution liquid chromatography/tandem mass spectrometry

Polycyclic aromatic hydrocarbons (PAHs) are ubiquitous environmental pollutants found in car exhausts, charbroiled food, and tobacco smoke. Three pathways for the metabolic activation of B[a]P to ultimate carcinogens have been proposed. The most widely accepted pathway involves cytochrome-P450 (CYP) 1A1- and/or 1B1-mediated formation of B[a]P-7,8-oxide, which undergoes epoxide hydrolase-mediated metabolism to the proximate carcinogen B[a]P-7,8-dihydro-7,8-diol. Further CYP1A1- and/or CYP1B1-mediated activation of the dihydrodiol results in the formation of 7,8-dihydroxy-9,10-epoxy-7,8,9,10-tetrahydrobenzo[a]pyrene (B[a]PDE), the ultimate carcinogen. In previous studies, it was demonstrated that (+)-anti-B[a]PDE was the most potent tumorigen of the CYP-derived B[a]PDE diastereomers. We have developed a stable isotope dilution, liquid chromatography multiple reaction monitoring/mass spectrometry (LC-MRM/MS) assay for all eight (+/-)-anti-B[a]PDE-derived dGuo and dAdo DNA-adducts. The LC-MRM/MS assay was rigorously validated and used to show that (+)-anti-trans-B[a]PDE-dGuo was the major adduct formed when naked DNA and human bronchoalveolar adenocarcinoma H358 cells were treated with (+/-)-anti-B[a]PDE. The preference for DNA-adducts derived from (+)-anti-B[a]PDE was even more apparent in cellular DNA. Thus, the increased potency of (+)-anti-B[a]PDE as a tumorigen is most likely due its ability to preferentially form DNA-adducts when compared with (-)-anti-B[a]PDE. Also, the adduct profile suggests that this occurs by binding of (+)-anti-B[a]PDE to DNA in a manner that facilitates covalent binding to dGuo rather than dAdo residues.     

固相萃取-超高效液相色谱法测定卷烟主流烟气中丙烯酰胺

建立了一种固相萃取-超高效液相色谱法(SPE-UPLC)快速检测主流烟气中丙烯酰胺的方法。使用剑桥滤片和吸收瓶捕集主流烟气后,蒸馏水做萃取溶剂,采用C18固相萃取小柱对样品液进行纯化,用UPLC检测,外标法定量。UPLC方法采用ACQUITY UPLCTMBEH C181.7μm 2.1×50 mm色谱柱,柱温30℃,流动相为V(乙腈)∶V(水)=6∶94,流速为0.15 mL/min,紫外检测器(TUV)检测波长为202 nm,分析时间为6 min。烤烟型香烟主流烟气中丙烯酰胺的含量为4.75μg/cig。方法的线性范围为0.1~10 mg/mL,线性相关系数为0.9999;平均回收率为98.7%;检出限为10 ng/mL(S/N=3);相对标准偏差为2.3%。该方法适合主流烟气中丙烯酰胺的快速检测。     

Gel permeation chromatography of oxygenated components of cigarette smoke condensate

Oxygenated neutral constituents of a tumor-inhibiting fraction of cigarette smoke condensate were separated from interfering phenolic compounds by a combination of silicic acid and gel chromatography. Silicic acid adsorption and Bio-Beads gel chromatography separated aliphatic from aromatic ketones, and gel chromatography on Sephadex LH-20 resolved aromatic ketones from phenols. Identifications were achieved by studying individual fractions by g.c. and g.c.—m.s.     

Reinvestigation of the jutz synthesis of benzo [e] pyrene and benzo [a] pyrene derivatives from benzanthrene

Base-catalyzed reactions of benzanthrene with “vinamidinium salts” ($\text{2a-c}$ ) followed by thermal electrocyclic ring closure are regiospecific affording only benzo [e] pyrene derivatives, contrary to previous claims.     

Determination of Benzo[a]pyrene in smoking-flavour agents (water-soluble liquid smoke) by second derivative constant-wavelength synchronous spectrofluorimetry

We have developed a simple, rapid, inexpensive method for the determination of benzo[a]pyrene (BP, a known carcinogen) in smoking-flavour agents (water-soluble liquid smoke; WSLS). After purification of the WSLS by a single passage through a Sep Pak C18 Plus cartridge, BP in the hexane eluate was determined by second derivative constant-wavelength synchronous spectrofluorimetry. Method precision (RSD < 6%) and recovery ( approximately 92%) were satisfactory, and the detection and quantification limits (1.05 and 2.28 mug kg(-1) respectively) indicated that the current maximum permissible concentration of BP in smoke flavourings (10 mug kg(-1)) can be monitored by this method.