Pressurized planar electrochromatography as a supporting tool for qualitative toxicological chemical analysis with thin-layer chromatography and UV–Vis spectrometry

ABSTRACT

Pressurized planar electrochromatography (PPEC) was applied to support qualitative toxicological chemical analysis performed with thin-layer chromatography (TLC) and UV–Vis spectrometry. Based on retention/migration distance data of substances obtained in TLC and PPEC systems and database of their wavelength maxima of remission UV–Vis spectra as well, a combined fit factor was calculated for substance identification. The involvement of PPEC, TLC, and UV–Vis spectral data together in calculation of the combined fit factor lead to its lower values for substances, which were not identical with reference, in comparison with those when the combined fit factor was calculated using TLC and spectral data only. The results evidence that involvement of PPEC data in qualitative toxicological chemical analysis performed with TLC and UV–Vis spectrometry enhances reliability of it.     

TLC Determination of Amitriptyline HCl,Trifluoperazine HCl,Risperidone and Alprazolam in Pharmaceutical Products

A simple, sensitive, and precise thin layer chromatographic (TLC) method for simultaneous analysis of psychopharmacological drugs like amitriptyline HCl, trifluoperazine HCl, risperidone and alprazolam in their single dosage forms has been developed, validated, and used for determination of the compounds in commercial pharmaceutical products. The TLC separation was carried out on Merck TLC aluminium sheets of silica gel 60 F254 using carbon tetrachloride:acetone:triethylamine (8:2:0.3, v/v/v), as mobile phase. Densitometric measurements of their spots were achieved at 250 nm over the concentration range for amitriptyline HCl (50–1,200 ng spot⁻¹), trifluoperazine HCl (50–1,200 ng spot⁻¹), risperidone (100–2,400 ng spot⁻¹) and alprazolam (25–600 ng spot⁻¹). Limit of detection (LOD) for amitriptyline HCl (20 ng spot⁻¹), trifluoperazine HCl (20 ng spot⁻¹), risperidone (40 ng spot⁻¹) and alprazolam (5 ng spot⁻¹) was obtained. The study showed that TLC was sensitive and selective for determination of amitriptyline HCl, trifluoperazine HCl, risperidone and alprazolam using a single mobile phase. This proposed method is able for simultaneous determination of psychopharmacological drugs and also applicable for analysis of pharmaceutical formulations.

     

Image analysis of phenylisothiocyanate derivatised and charge-couple device-detected glyphosate and glufosinate in food samples separated by thin-layer chromatography

The paper presents the application of pre-chromatographic derivatisation reaction of aminophosphonic acids (glyphosate and glufosinate) with phenylisothiocyanate in thin-layer chromatography (TLC). Silica gel as stationary phase and a mixture of methanol–water–diethyl ether (2:1:1, v/v/v) and ethanol–water–diethyl ether (4:1:2, v/v/v) were used as the mobile phase, respectively. Detection was performed by spraying TLC plates with a freshly prepared mixture of sodium azide (1%), starch solution (1% for glyphosate and 2% for glufosinate), and potassium iodide (1.0 × 10^–2 mol L^?1) adjusted to pH 6.0 and exposed to iodine vapour for 15 s. Both glyphosate and glufosinate as phenylthiocarbamates (PTC-derivatives) were visible as white spots against a violet background which were converted into chromatograms using TLSee software. The calibration curves for glyphosate and glufosinate were within the ranges of 8.45–84.5 ng and 1.98–79.2 ng per spot, respectively. The limits of detection and quantification for glyphosate were at a level of 4 and 8.45 ng per spot, and for glufosinate were 0.99 and 1.78 ng per spot, respectively. The proposed method was successfully used in the determination of aminophosphonic acids in spiked plants samples.     

Resolution and isolation of enantiomers of (±)‐isoxsuprine using thin silica gel layers impregnated with l‐glutamic acid,comparison of separation of its diastereomers prepared with chiral derivatizing reagents having l‐amino acids as chiral auxiliaries

Thin silica gel layers impregnated with optically pure l ‐glutamic acid were used for direct resolution of enantiomers of (±)‐isoxsuprine in their native form. Three chiral derivatizing reagents, based on DFDNB moiety, were synthesized having l ‐alanine, l ‐valine and S‐benzyl‐l ‐cysteine as chiral auxiliaries. These were used to prepare diastereomers under microwave irradiation and conventional heating. The diastereomers were separated by reversed‐phase high‐performance liquid chromatography on a C₁₈ column with detection at 340 nm using gradient elution with mobile phase containing aqueous trifluoroacetic acid and acetonitrile in different compositions and by thin‐layer chromatography (TLC) on reversed phase (RP) C₁₈ plates. Diastereomers prepared with enantiomerically pure (+)‐isoxsuprine were used as standards for the determination of the elution order of diastereomers of (±)‐isoxsuprine. The elution order in the experimental study of RP‐TLC and RP‐HPLC supported the developed optimized structures of diastereomers based on density functional theory. The limit of detection was 0.1–0.09 µg/mL in TLC while it was in the range of 22–23 pg/mL in HPLC and 11–13 ng/mL in RP‐TLC for each enantiomer. The conditions of derivatization and chromatographic separation were optimized. The method was validated for accuracy, precision, limit of detection and limit of quantification. Copyright © 2014 John Wiley & Sons, Ltd.     

Development of an HPTLC‐based diagnostic method for invasive aspergillosis

A rapid, sensitive and specific high‐performance thin‐layer chromatographic (HPTLC) method was developed and validated for determination of gliotoxin in Aspergillus infected immunocompromised patients with invasive aspergillosis (IA). Densitometric analysis of gliotoxin was carried out in the absorbance mode at 254 nm after single‐step extraction with chloroform. The method uses TLC aluminum plates pre‐coated with silica gel 60F‐254 as a stationary phase and toluene–isoamyl alcohol–methanol (10:0.5:0.5, v/v/v) as mobile phase, which gives compact spot of gliotoxin (R_f = 0.51). The calibration curve was linear (r² ≥ 0.994) between peak area and concentration in the tested range of 100–1000 ng spot^?1 with minimum detectable range 0.025 ng μ^?1 of serum sample. The mean ± SD value of slope and intercept of the standard chromatogram of gliotoxin were found to be 523.2 ± 1.555635 and 915.8 ± 30.68843, respectively. The developed method is simple, rapid, precise and less costly than earlier diagnostic methods, and different serum samples can be run on a single TLC plate for comparative analysis. The proposed method can be used to analyze gliotoxin in patient serum for easy, rapid and cost‐effective diagnosis of IA. Copyright © 2009 John Wiley & Sons, Ltd.     

Optimum Ultrasound Assisted Extraction Conditions of Some Flavonoids from Green Tea Leaves. Control Quality of Green Tea Product by TLC Fingerprinting

The optimization of the green tea flavonoid extraction conditions was investigated. The experiments were carried out with two extraction methods: ultrasound assisted extraction (UAE) and reflux extraction (RE). The parameters that were varied in this study were: the extraction solvent system composition, the type of organic modifier of the extraction mixture, temperature, and time. The highest efficiency was obtained with an extraction mixture of ethanol: water, 80:20, v/v. An extraction performed at temperature of 45°C in 50–60 minutes led to optimum results. Moreover, a new fingerprinting procedure based on thin layer chromatography (TLC) image analysis was employed in order to compare the chemical composition of green tea in comparison with white and black tea.     

Analysis of gardenia blue in foods by thin-layer chromatography

In the present study, a thin-layer chromatography (TLC) method for the analysis of gardenia blue was described. Gardenia blue is obtained from the fruits of Gardenia augusta Merrill or Gardenia jasminoides Ellis. Recently, gardenia blue has frequently been used in Japan as a natural coloring in various foods. However, the structural characterization of gardenia blue components has not been yet clarified and even chromatographic separation of the components has not been reported. Synthetic colors in foods are generally analyzed by TLC; so, we therefore investigated the analysis of gardenia blue in foods with TLC. We established two TLC conditions; reversed phase C-18 TLC using a solvent system of aqueous 0.2% TFA–acetonitrile–ethanol (1:2:3) and TLC on cellulose plate using a solvent system consisting of acetone–3-methyl-1-butanol–water (6:5:5). Both conditions yielded three well-delineated spots with good separation. We applied these separations to the analyses of gardenia blue in coloring matter preparations from different manufacturers and in foods on the market. After the gardenia blue was extracted from the samples with water, the extract was evaporated and the residue was dissolved in water–methanol (1:1). Aliquots of the dissolved solutions were then applied to TLC and their chromatographic behaviors were observed. Each preparation showed characteristic spot patterns depending on the manufacturers. The R_f values of the separated spots when extracted from foods are slightly different from the R_f values of the spots observed for standards, and we were thus able to identify the manufacturers using the spot pattern of gardenia blue. The present study is considered to be useful for the establishment of a method of analysis for gardenia blue in coloring preparations and foods.     

Different stability‐indicating chromatographic methods for specific determination of paracetamol,dantrolene sodium,their toxic impurities and degradation products

A well‐known analgesic (paracetamol, PAR) and skeletal muscle relaxant [dantrolene sodium (DNS)] have been analyzed without interference from their toxic impurities and degradation products. The studied PAR impurities are the genotoxic and nephrotoxic p‐amino phenol (PAP) and the hepatotoxic and nephrotoxic chloroacetanilide, while 5‐(4‐nitrophenyl)‐2‐furaldehyde is reported to be a mutagenic and carcinogenic degradation product of DNS. The five studied components were determined and quantified by TLC–densitometric and RP‐HPLC methods. TLC–densitometry (method 1) used TLC silica gel and chloroform–ethyl acetate–acetic acid–triethylamine (7:3:0.5:0.05, by volume) as the mobile phase with UV scanning at 230 nm, while RP‐HPLC (method 2) was based on separation on a C₁₈ column using methanol–water (55:45, v/v pH 3 with aqueous formic acid) as mobile phase at 1 mL/min and detection at 230 nm. The developed methods were used for determination and quantification of the five studied components in different laboratory‐prepared mixtures. The were also applied for analysis of Dantrelax^® compound capsules where no interference among the studied components with each other or from excipients was observed. The methods were validated as per International Conference on Harmonization guidelines, and they compared favorably with the reported ones.     

The use of thin-layer chromatography in the assessment of the quality of lutein-containing dietary supplements

Bivariant multiple development thin-layer chromatography technique (BMD–TLC) along with high-performance liquid chromatography–diode array detection–electrospray ionization–mass spectrometry (HPLC–DAD–ESI–MS) analysis was used in determination of lutein or lutein mixed with zeaxanthin in eight dietary supplements. The developed two-step TLC separation procedure combined purification, compaction of samples and separation of the analyzed compounds what significantly shortened and simplified samples preparation. Qualitative analysis was based on co-chromatography with reference substances and HPLC–DAD–ESI–MS analysis. It was revealed that three of eight dietary supplements did not contain lutein. In turn, quantitative analysis with the use of developed TLC conditions along with densitometry showed that the amount of lutein or its mixture with zeaxanthin in the others differed from that claimed by producers.

     

Evaluation of a TLC Densitometric Method for Analysis of Azole Antifungal Agents

A new method for identification and quantitative determination of the azole antifungal agents; ketoconazole, bifonazole, fluconazole and itraconazole is described using TLC with densitometric detection. Validation of the method was carried out to confirm its precision (%RSD ranged between 1.31 and 3.45), recovery (99.7–102.4%) and linearity (r  = 0.99287–0.99722) within the concentration range under investigation. The experimental conditions obtained enable the method to be used for both qualitative and quantitative pharmaceutical analysis.     

Evaluation of a TLC Densitometric Method for Analysis of Azole Antifungal Agents

A new method for identification and quantitative determination of the azole antifungal agents; ketoconazole, bifonazole, fluconazole and itraconazole is described using TLC with densitometric detection. Validation of the method was carried out to confirm its precision (%RSD ranged between 1.31 and 3.45), recovery (99.7–102.4%) and linearity (r  = 0.99287–0.99722) within the concentration range under investigation. The experimental conditions obtained enable the method to be used for both qualitative and quantitative pharmaceutical analysis.

     

Multivariate analysis of PRISMA optimized TLC image for predicting antioxidant activity and identification of contributing compounds from Pereskia bleo

Multivariate analysis of thin‐layer chromatography (TLC) images was modeled to predict antioxidant activity of Pereskia bleo leaves and to identify the contributing compounds of the activity. TLC was developed in optimized mobile phase using the ‘PRISMA’ optimization method and the image was then converted to wavelet signals and imported for multivariate analysis. An orthogonal partial least square (OPLS) model was developed consisting of a wavelet‐converted TLC image and 2,2‐diphynyl‐picrylhydrazyl free radical scavenging activity of 24 different preparations of P. bleo as the x‐ and y‐variables, respectively. The quality of the constructed OPLS model (1 + 1 + 0) with one predictive and one orthogonal component was evaluated by internal and external validity tests. The validated model was then used to identify the contributing spot from the TLC plate that was then analyzed by GC‐MS after trimethylsilyl derivatization. Glycerol and amine compounds were mainly found to contribute to the antioxidant activity of the sample. An alternative method to predict the antioxidant activity of a new sample of P. bleo leaves has been developed. Copyright © 2015 John Wiley & Sons, Ltd.     

Development and Validation of HPLC,TLC and Derivative Spectrophotometric Methods for the Analysis of Ezetimibe in the Presence of Alkaline Induced Degradation Products

Reversed phase‐high performance liquid chromatography (RP‐HPLC), thin layer chromatography (TLC) densitometry and first derivative spectrophotometry (1D) techniques are developed and validated as a stability‐indicating assay of ezetimibe in the presence of alkaline induced degradation products. RP‐HPLC method involves an isocratic elution on a Phenomenex Luna 5μ C₁₈ column using acetonitrile: water: glacial acetic acid (50:50:0.1 v/v/v) as a mobile phase at a flow rate of 1.5 mL/min. and a UV detector at 235 nm. TLC densitometric method is based on the difference in Rf‐values between the intact drug and its degradation products on aluminum‐packed silica gel 60 F₂₅₄ TLC plates as stationary phase with isopropanol: ammonia 33% (9:1 v/v) as a developing mobile phase. On the fluorescent plates, the spots were located by fluorescence quenching and the densitometric analysis was carried out at 250 nm. Derivative spectrophotometry, the zero‐crossing method, ezetimibe was determined using first derivative at 261 nm in the presence of its degradation products. Calibration graphs of the three suggested methods are linear in the concentration ranges 1–10 mcg/mL, 0.1–1 mg/mL and 1–16 mcg/mL with a mean percentage accuracy of 99.05 ± 0.54%, 99.46 ± 0.63% and 99.24 ± 0.82% of bulk powder, respectively. The three proposed methods were successfully applied for the determination of ezetimibe in raw material and pharmaceutical dosage form; the results were statistically analyzed and compared with those obtained by the reported method. Validation parameters were determined for linearity, accuracy and precision; selectivity and robustness and were assessed by applying the standard addition technique.     

Rapid on-site TLC–SERS detection of four antidiabetes drugs used as adulterants in botanical dietary supplements

A novel facile method has been established for rapid on-site detection of antidiabetes chemicals used to adulterate botanical dietary supplements (BDS) for diabetes. Analytes and components of pharmaceutical matrices were separated by thin-layer chromatography (TLC) then surface-enhanced Raman spectroscopy (SERS) was used for qualitative identification of trace substances on the HPTLC plate. Optimization and standardization of the experimental conditions, for example the method used for preparation of silver colloids, the mobile phase, and the concentration of colloidal silver, resulted in a very robust and highly sensitive method which enabled successful detection when the amount of adulteration was as low as 0.001 % (w/w). The method was also highly selective, enabling successful identification of some chemicals in extremely complex herbal matrices. The established TLC–SERS method was used for analysis of real BDS used to treat diabetes, and the results obtained were verified by liquid chromatography–triple quadrupole mass spectrometry (LC–MS–MS). The study showed that TLC–SERS could be used for effective separation and detection of four chemicals used to adulterate BDS, and would have good prospects for on-site qualitative screening of BDS for adulterants.

Validated TLC-Image Analysis Method for Simultaneous Quantification of Curcuminoids in Curcuma longa

A simple and rapid thin layer chromatographic (TLC)-image analysis method was developed for simultaneous quantification of three curcuminoids; curcumin (CUR), desmethoxycurcumin (DES) and bisdesmethoxycurcumin (BIS), in Curcuma longa (turmeric). Chromatographic separation of the curcuminoids was achieved on silica gel 60 F254 TLC plates, using chloroform–hexane–methanol (1:1:0.1, v/v/v) as the mobile phase. Image analysis of the scanned TLC plate was performed by Photoshop 7.0 to quantify the amount of each curcuminoid. The method was validated and found to be accurate, reliable and convenient for the analysis of CUR, DES and BIS in turmeric.

     

Stability-Indicating HPTLC Method for Analysis of Moclobemide, and Use of the Method to Study Degradation Kinetics

A sensitive, selective, precise, and stability-indicating HPTLC method for analysis of moclobemide in the bulk drug and in formulations has been established and validated. Aluminium TLC plates precoated with silica gel 60 F₂₅₄ were used with benzene–methanol–40% ammonia 7:3:0.1 (v/v) as mobile phase. Densitometric analysis was performed in absorbance mode at 238 nm. Compact bands were obtained for moclobemide (R _F 0.67 ± 0.02; n = 6). The drug was subjected to acidic and alkaline hydrolysis, oxidation, dry heat treatment, and photodegradation. The drug undergoes degradation under acidic, basic, and oxidising conditions. The degradation products were well resolved from the pure drug with significantly different R _F values, so the method can be regarded as stability-indicating. Response to moclobemide was a linear function of amount in the range 50–600 ng per band, with a correlation coefficient, r ², of 0.9967 ± 0.51. LOD and LOQ, determined experimentally, were 10 and 30 ng per band, respectively. Statistical analysis proves the method is repeatable and specific for analysis of moclobemide. The method was used to investigate the kinetics of alkaline degradation. The Arrhenius plot was constructed and the activation energy calculated.     

Electrochemical and Molecular Dynamics Evaluation on Inhibition Performance of 2-(1-Methyl-Nonyl)-Quinoline

A novel vapor phase inhibitor, 2-(1-methyl-nonyl)-quinoline, was designed to cope with top-of-line corrosion (TLC) in wet gas pipelines and characterized via electrochemical measurements, scanning vibrating electrode technique (SEVT), surface analysis techniques, and molecular dynamics methods. 2-(1-methyl-nonyl)-quinoline showed parallel adsorption and was predominantly a cathodic-type inhibitor. The inhibition efficiency increased with temperature (30–50°C) and pH (4.15–5.76), and reached 97.25% at a concentration of 0.0282 mol/L. The SEVT showed that the average current density of the X80 steel specimen without inhibitor (anode region, 6.58087 µA/cm²) was about 2.5 times that of the other with inhibitor (cathode region, ?2.61974 µA/cm²).     

Determination of Sumatriptan and Zolmitriptan in Presence of Their Corresponding Degradation Products by HPTLC Methods

Accurate, sensitive, and precise high performance thin layer chromatographic (HPTLC) methods were developed and validated for the determination of sumatriptan and zolmitriptan in presence of their degradation products. Sumatriptan was separated from its degradation products and analyzed on TLC silica gel 60 F₂₅₄ plates using chloroform–ethyl acetate–methanol–ammonia (4:3:3:0.1, v/v) as a developing system followed by densitometric measurement of the bands at 228 nm. Zolmitriptan was determined using chloroform–ethyl acetate–methanol–ammonia (3:3:3:1, v/v) as a developing system followed by densitometric measurement at 222 nm. The methods were validated over a range of 0.5–4 μg/spot for sumatriptan and 0.5–3 μg/spot for zolmitriptan. The proposed methods were successfully applied for the determination of the studied drugs in bulk powder and in their pharmaceutical formulations.     

TLC Based Method for Standardization of Pongamia pinnata (Karanj) Using Karanjin as Marker

Pongamia pinnata Linn. (Papilionaceae) seeds have gained great commercial and industrial importance owing to their high oil content. Presently, there is no appropriate TLC based method available for standardization of P. pinnata. A simple, robust and reproducible TLC method for the determination of Karanjin is reported in the seeds of P. pinnata. The method involves separation of components by TLC on pre-coated silica gel G 60 F₂₅₄ plates developed on toluene: ethyl acetate (7:3 v/v) and detection at 260 nm in absorbance mode. The sensitivity of the method was found to be 100 ng. The linearity range was 50–300 ng. Four samples of P. pinnata from different geographical locations were tested for their karanjin content using the developed method. The proposed method was found to be robust, precise, and accurate, it therefore holds potential for detection, monitoring and quantification of karanjin in Pongamia pinnata.

     

Spectrophotometric and spectrodensitometric quantification of a new antiviral combination

Accurate, simple, and selective spectrophotometric and spectrodensitometric methods were developed and adopted to quantify velpatasvir (VPS) and sofosbuvir (SFV) concurrently in their pure forms and tablets. The spectrophotometric technique was based on the first derivative of ratio spectra (¹DD) technique and developed to determine VPS and SFV simultaneously in table formulation. However, the spectrodensitometric technique was based on thin-layer chromatography (TLC) and densitometry and developed to determine VPS and SFV simultaneously in tablet dosage form. Chromatographic separation was performed using chloroform:methanol 9.5:0.5 (%, v/v) as the mobile phase on glass-coated TLC plates. Detection was achieved using a 265-nm deuterium lamp in absorbance mode. Both analytical methods were validated according to the International Conference on Harmonization (ICH)-Q2B guidelines. The linearity in the range of concentration ranges of 1–50 μg/mL and 5–80 μg/mL were obtained for VPS and SFV, respectively, using ¹DD spectrometric method. However, the linearity in the range of 5–50 and 10–70 μg/band for VPS and SFV, respectively, were recorded using TLC–densitometric method. Accuracy was recorded ˃100% for VPS and SFV using both methods. This is the first TLC–densitometry method that can separate and quantify the studied mixture of the drugs. The proposed analytical methods were found to be accurate, precise, selective, robust and sensitive for simultaneous analysis of VPS and SFV in tablet dosage forms.