An investigation into possible sources of phthalate contamination in the environmental analytical laboratory

A study of common laboratory equipment and components was performed in order to identify sources of contamination of phthalates prior to testing environmental samples for such compounds. A screening study revealed significant leaching from laboratory consumables, such as plastic syringes, pipette tips released maximum leachings of 0.36?µg?cm^?2 diethylhexyl phthalate (DEHP) and 0.86?µg?cm^?2 diisononyl phthalate (DINP), plastic filter holders produced maximum leachings of 2.49?µg?cm^?2 dibutyl phthalate (DBP) from polytetrafluoroethylene (PTFE); specifically 0.61?µg?cm^?2 DBP from regenerated cellulose and 5.85?µg?cm^?2 dimethyl phthalate (DMP) from cellulose acetate and Parafilm® leached levels up to 0.50?µg?cm^?2 DEHP. In addition, a high-temperature bake-out process was found necessary to eliminate quite high levels of two phthalates present in a commercial bulking agent for pressurized liquid extraction.     

Hydrophobic octadecylamine-polyphenol film coated slow released urea via one-step spraying co-deposition

Polymer coated fertilizer has been designed for gradual release of nutritional content of fertilizer to improve the utilization efficiency. However, the better slow release property of the coated fertilizer and simplified preparation process are still a huge challenge. The hydrophobic ODA-polyphenol film coated urea was prepared by one-step spraying for excellent nutrient release performance. Octadecylamine (ODA) was used to modify poly(tannic acid) (PTA) and poly(pyrogallol) (PPG) coating on substrates and prepare the hydrophobic ODA-PTA and ODA-PPG coated urea granules. The nutrient release rate of ODA-PTA and ODA-PPG coated fertilizers was much slower than PTA and PPG coated fertilizers in water and soil. The N release longevities of ODA-PTA coated fertilizers will be extended from 2 h to 30 days compared with PTA coated fertilizers. Moreover, pot experiments showed that coated fertilizer could effectively promote plant growth. This work will provide one-step spraying co-deposition approach to fabricate hydrophobic ODA-polyphenol film coated urea to improve the N release longevity, which can shine a light on the development of new slow release fertilizers (SRFs).     

Electrochemical Determination of Uric Acid Using a Multiwalled Carbon Nanotube Platinum–Nickel Alloy Glassy Carbon Electrode

Platinum–nickel nanoparticles were synthesized by a reduction procedure. The Pt–Ni/C composite was characterized by X-ray diffraction, infrared spectroscopy, transmission electron microscopy, and electrochemical analysis. The measurements show that the Pt–Ni/multiwalled carbon nanotubes provided higher electrocatalytic activity for the oxidation of uric acid than Pt–Ni/carbon black. The sensor prepared from the characterized material provided a long linear dynamic range from 0.1 to 240.4?µM with a detection limit of 0.03?µM and a sensitivity of 41.21?µA?mM^?1?cm^?2. The reported modified electrode also provided excellent selectivity, good stability, and satisfactory reproducibility for the determination of uric acid.     

Infrared spectroscopy of ethylene–vinyl chloride copolymers

This paper continues an investigation into the ethylene–vinyl chloride copolymers prepared by partial reduction of poly(vinyl chloride). The infrared spectra of the copolymers have been obtained and the individual resonances assigned. Each infrared band has been quantitatively analyzed in terms of peak position (cm^?1) and intensity, and correlations with the sequence microstructure (dyad, triads, etc.) have been determined. The infrared resonances have been found to be sensitive to long sequences; i.e., (V)_x or (E)_x where x ≥ 10. Sequences of up to 10–15 monomer units were seen to affect the position (cm^?1) and intensity of C? H stretching and bending frequencies. Methylene rocking bands between 850 and 700 cm^?1 were observed to be sequence dependent with ? V(E)_xV? resonanting at 860, 750, or 730 cm^?1 for x = 0, 1 and 2, or ≥3, respectively. The C? Cl stretching resonances, which are well known for their conformational complexity in pure PVC, were found to be dominated by sequence length effects reducing to two bands at 665 and 610 cm^?1 characteristic of and isolated ? CH? Cl unit in a long methylene chain.     

Determination of airborne wood dust in Button samples by diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS)

Emerging concerns regarding the toxicity of inhaled wood dust support the need for techniques to quantitate wood content of mixed industrial dusts. The diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS) analysis technique was applied to the determination of wood content of 181 inhalable dust samples (geometric mean concentration: 0.895?mg/m³; geometric standard deviation: 2.73) collected from six wood product industry factories using 25?mm glass fibre filters with the Button aerosol sampler. Prior to direct DRIFTS analysis the filter samples were treated with ethyl acetate and re-deposited uniformly. Standards ranging from 125?µg to 4000?µg were prepared for red oak, southern yellow pine, and red cedar and used for quantitation of samples depending upon the wood materials present at a given factory. The oak standards spectra were quantitated by linear regression of response in Kubelka-Munk units at 1736?cm^?1, whereas the pine standards and the cedar standards spectra were quantitated by polynomial regression of response in log 1/R units at 1734?cm^?1, with the selected wavenumbers corresponding to stretching vibration of free C=O from cellulose and hemicelluloses. For one factory which used both soft- and hard-woods, a separate polynomial standard curve was created by proportionally combining the oak and pine standards polynomial regression equations based on response (log 1/R) at 1734?cm^?1. The analytical limits of detection were approximately 52?µg of oak, 20?µg of pine, 30?µg of cedar, and 16?µg of mixed oak and pine for the factory with mixed woods. Overall, the average of dry wood dust percentage of inhalable dust was approximately 56% and the average dry wood dust weight was 0.572?mg for the Button samples. Across factories, there were statistically significant differences (p?<?0.001) for the percentage of dry wood dust in inhalable dust with factory averages ranging from 33.5 to 97.6%.     

Poly[N‐isopropyl acrylamide]‐co‐polyurethane copolymers for controlled release of urea

A novel block copolymer of poly[N‐isopropyl acrylamide]‐co‐polyurethane was designed, synthesized, and applied as controlled release fertilizer coating. Structural confirmation of the copolymer was performed using FTIR and ¹H‐NMR spectra and elemental analysis. The coating process consists essentially of immersing urea granules in molten polymer and removing the coated urea from the melt by centrifugal action. The morphology of the coated urea was studied using scanning electron microscope (SEM). The polymer coat of the urea granules was found to swell in water forming pores and enabling the release of urea. The urea released from the granule, monitored using a mass spectroscopy technique, was found to be governed by pH of the aqueous medium. The study anticipates development of a beneficiary fertilizer coat in terms of improving controlled release over a period of time which can be tailored by soil temperature, pH and moisture. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 3236–3243, 2010     

Determination of Manganese(II) with Preconcentration on Almond Skin and Determination by Flame Atomic Absorption Spectrometry

Almond skin was used as a biosorbent by solid-phase extraction for the preconcentration of manganese(II) before the determination by flame atomic absorption spectrometry. Characterization of almond skin was performed by infrared spectroscopy. The functional groups of the almond skin surface were shown to be beneficial for the adsorption of manganese(II). At pH 6.0, the manganese(II) ions were retained on the almond skin and afterward quantitatively eluted using 1.5?mol?L^?1 nitric acid. The pH, flow rate and volume of sample, concentration, and flow rate of eluent and interfering ions were characterized. Using a sample size of 30?mL, a linear dynamic range of 1–120?µg?L^?1 was obtained. A detection limit of 0.24?µg?L^?1 manganese(II) and a relative standard deviation of 1.6% at 30?µg?L^?1 were achieved. The accuracy of the present procedure was evaluated by the determination of manganese(II) in a certified reference material (GSB07-1189-2000). The protocol was also used for the determination of manganese(II) in wastewater. The fortified recoveries were from 99.0 to 99.4%.     

Determination of Selenium by Single-Drop Microextraction and Diffuse Reflectance Infrared Spectroscopy

A simple and convenient assay based on single-drop microextraction with infrared spectroscopy is reported for the determination of selenium. The extraction conditions were carefully optimized and selenium was preconcentrated through single-drop microextraction in 1,2-dichloroethane containing N-hydroxy-N-phenyl-N′-(o-tolyl) benzimidamide. The method is selective and almost all common ions including molybdenum(VI), chromium(VI), and tungsten(VI) did not interfere with the isolation protocol. The selenite band at 875?±?2?cm^?1, which is assigned to the asymmetric vibrational stretch (υ₃), was used for the quantification of selenium. Low limits of detection and quantification of 2.0 and 6.6?µg?L^?1 demonstrate the sensitivity of the method. Good precision was evaluated by the standard deviation (2.0?µg?L^?1) and relative standard deviation (0.5%) for 8?µg?L^?1 was achieved for 10 measurements. The method was used to analyze human blood, urine, and water for selenium.     

FT-IR microscopic imaging of calcified deposit of rotator cuff tendonitis: A pilot study and a randomised identification of the compositional components after extrusion from tendon to muscle

Fourier transform infrared (FT-IR) microspectroscopy with mapping system was applied to identify and evaluate what difference in the distribution and compositional components of the calcified deposit of rotator cuff tendonitis after dislocation from tendon to muscle. A 49 year-old female patient suffered from severe shoulder pain was enrolled in this study. Diagnostic high-resolution ultrasonography (HRUS) was initially carried out to verify the calcific tendonitis. The calcified deposits were then examined by histopathologic assessment and FT-IR microspectroscopy. Diagnostic HRUS reveals that the calcified deposits were observed in the subscapularis tendon and infraspinatus muscle of the shoulder for this patient. FT-IR microspectroscopic imaging results clearly indicate that both IR spectra of the calcified deposits in tendon and muscle were almost the same as that of the IR spectrum of hydroxyapatite except the peak at 873 cm⁻¹. It is also found that the peak intensity at 1030 cm⁻¹ for tendon sample was somewhat more intense than that of the peak at 1031 cm⁻¹ for muscle sample, implying that the calcified sample in the tendon seems to be mature than that in the muscle. The second-derivative IR spectra of two calcified samples exhibit two specific sharp peaks at 880 and 872 cm⁻¹, indicating that the type A and type B carbonated apatites were markedly co-existed in both calcified deposits of tendon and muscle even the calcified deposit was dislocated from tendon to muscle. These carbonated apatites presented in the calcified deposits of either tendon or muscle of the shoulder were also consistent with the nodular or nodular nodular-cystic morphology of calcified plaque of the shoulder after HRUS examination.     

Construction of an Amperometric Glucose Biosensor by Immobilization of Glucose Oxidase on Nanocomposite at the Surface of FTO Electrode

Fluorine? tin oxide (FTO) nanostructure was developed on the surface of a glass plate using spray payroliziz method. A new electrochemical biosensor was fabricated based on a layer by layer process. In this process chitosan? Fe₃O₄ (CH? Fe₃O₄) nanocomposite film was prepared at the surface of FTO electrode by dip? coating method. In the next step, the glucose oxidase (GOx) was immobilized on the CH? Fe₃O₄/FTO nanocomposite electrode. The GOx/CH? Fe₃O₄/FTO bioelectrode has a linear range of 10–270 µM and a detection limit of 5 µM. The highest sensitivity was obtained at 1.2 µA mM^?1 cm^?2.     

A new experimental approach for liquid-liquid extractive spectrophotometric determination of chromium(VI) in tannery wastewater and alloy samples

In this research work, a new approach is developed for the extractive determination of chromium. The principle of this approach is based on the complexation reaction between 4-(4?-chlorobenzylideneimino)-3-methyl-5-mercapto-1,2,4-triazole (CBIMMT) in dichloromethane as a complexing reagent and chromium(III) in presence of potassium iodide to form a yellow coloured complex at room temperature. The 1:2:2 [Cr(III)-CBIMMT-iodide] ternary complex was quantitatively extracted in dichloromethane from 2.5 mol L^?1 of hydrochloric acid medium which showed maximum absorption intensity at λ_max 411 nm and was stable for more than 72 h. The values of molar absorption coefficient and Sandell’s sensitivity of the complex were found to be 0.7019 × 10⁴ L mol^?1 cm^?1 and 0.00748 µg cm^?2, respectively. The system adheres to Beer’s law from 1.5 to 6.0 µg mL^?1; however, Ringbom’s plot suggests optimal concentration range was 1.8–5.8 µg mL^?1. The limit of detection and limit of quantification of the approach is 0.26 and 0.79 µg mL^?1. This approach was successfully used for the determination of chromium from wastewater effluents from the tannery industries (Kolhapur, MS, India), alloy samples and for separation of it from synthetic mixtures. The present experimental approach is apparently much simpler than the conventional method comprising multistep processes.     

Differentiation of Rhizoma Curcumas Longae and Radix Curcumae by a Multistep Infrared Macro-Fingerprint Method

A multistep infrared macro-fingerprint method was applied to identify two Chinese herbal drugs, Rhizoma Curcumas Longae (RCL) and Radix Curcumae (RC). Fourier transform infrared (FT-IR) spectra of the two were similar to each other and consistent with the 11 peaks of the spectrum of starch. RCL had a characteristic absorption peak at approximately 1514 cm^?1 that correlated to the strong peak near 1509 cm^?1 of curcumin. Between 900 cm^?1–1700 cm^?1 of the second derivative infrared (SD-IR) spectra, with higher resolution, RCL, and curcumin had 10 common peaks. In the FT-IR and SD-IR spectra of the ethanol extract, the spectra of the RCL extract and curcumin were similar, but RC was different. According to the fingerprint characteristics of the infrared spectra for RC and its extracts, the strongest peak at 1055 cm^?1; the C-O absorption peaks at 1124 cm^?1, 1106 cm^?1, and 996 cm^?1; and the strong methylene peaks at 2925 cm^?1 and 2853 cm^?1 suggest that RC contains more saccharides. In the range of 1350 cm^?1–1700 cm^?1, RCL and RC had similar two-dimensional infrared (2D-IR) correlation spectra. Both of them had three autopeaks, but the autopeaks were located at 1458 cm^?1, 1560 cm^?1, and 1641 cm^?1 for RCL and 1458 cm^?1, 1560 cm^?1, and 1669 cm^?1 for RC, suggested that the aromatic components of the two were not identical. The average correlation for the 18 RCL and 18 RC samples were 0.9906 and 0.9878, respectively, and this method achieves a good classification of the sample type.     

An electrochemical sensor for sensitive determination of nitrites based on Ag-Fe<Subscript>3</Subscript>O<Subscript>4</Subscript>-graphene oxide magnetic nanocomposites

A functional Ag-Fe₃O₄-grapheme oxide magnetic nanocomposite was synthesized and used to prepare a nitrite sensor. Morphology and composition of the nanocomposites were characterized by a transmission electron microscope, UV-VIS spectroscopy, X-ray diffraction, and Fourier transform infrared spectra. Electrochemical investigation indicated that the nanocomposites possess excellent electrochemical oxidation ability towards nitrites. The sensor exhibited two linear ranges: one from 0.5 µM to 0.72 mM with a correlation coefficient of 0.996 and sensitivity of 1996 µA mM^?1 cm^?2; the other from 0.72 mM to 8.15 mM with a correlation coefficient of 0.998 and sensitivity of 426 µAmM^?1 cm^?2. The limit of detection of this sensing system was 0.17 µM at the signal-to-noise ratio of 3. Additionally, the sensor exhibited long-term stability, good reproducibility, and anti-interference.     

Electronic absorption spectrum of copper formate tetrahydrate

Single crystals of copper formate tetrahydrate were grown at room temperature. Spectra in the near infrared at room temperature and in the visible at room and liquid air temperatures were recorded on a Unicam SP-700 spectrophotometer and Hilger medium quartz spectrograph respectively. The observed absorption bands have been attributed to an ion of Cu²⁺ in tetragonal symmetry with ²B_1g as the ground state. Taking into consideration the spin—orbit coupling associated with the tetragonal field, a successful interpretation of all the observed bands has been made. The band observed in the near infrared at 11000 cm^?1 has been indentified with a vibrational overtone mode of CO₂. The crystal parameters derived are Dq = ?1380 cm^?1, Ds = ?1950 cm^?1, Dt = ?205 cm^?1 and λ = ?830 cm^?1.     

Cyproterone Synthesis, Recognition and Controlled Release by Molecularly Imprinted Nanoparticle

In this study, we used novel synthetic conditions of precipitation polymerization to obtain nanosized cyproterone molecularly imprinted polymers for application in the design of new drug delivery systems. The scanning electron microscopy images and Brunauer?CEmmett?CTeller analysis showed that molecularly imprinted polymer (MIP) prepared by acetonitrile exhibited particles at the nanoscale with a high degree of monodispersity, specific surface area of 246?m²?g^?1, and pore volume of 1.24?cm³?g^?1. In addition, drug release, binding properties, and dynamic light scattering of molecularly imprinted polymers were studied. Selectivity of MIPs was evaluated by comparing several substances with similar molecular structures to that of cyproterone. Controlled release of cyproterone from nanoparticles was investigated through in vitro dissolution tests and by measuring the absorbance by HPLC-UV. The pH dissolution media employed in controlled release studies were 1.0 at 37?°C for 5?h and then at pH 6.8 using the pH change method. Results show that MIPs have a better ability to control the cyproterone release in a physiological medium compared to the non molecularly imprinted polymers (NMIPs).     

Quantitative determination of toluene,ethylbenzene, and xylene degradation products in contaminated groundwater by solid-phase extraction and in-vial derivatization

Benzylsuccinic acid (BSA) and methylbenzylsuccinic acids (mBSAs) are unambiguous indicators of anaerobic toluene and ethylbenzene/xylene degradation, and so the determination of these compounds in landfill leachates and contaminated groundwater is highly relevant. Samples were diluted to <0.8?mS?cm^?1 in order to reduce their ionic strength, and subsequently extracted through strong anion exchange disks, followed by simultaneous in-vial elution and methylation. A detection limit of 0.1?µg?L^?1 was obtained for 100?mL samples. Using this method, 19.3?µg?L^?1 of BSA was measured in a landfill leachate, and low µg?L^?1 levels of all of the mBSAs were measured in gasoline-contaminated groundwater. The results were compared with the findings of BSAs at 16 other contaminated sites, and BSAs as indicators of biodegradation were evaluated. The estimation of biodegradation rates based on parent hydrocarbons and BSA concentrations or ratios is questionable. However, the degradation products serve as good qualitative in situ indicators for anaerobic biodegradation in contaminated groundwater.     

Direct Voltammetry of Copper,Zinc‐Superoxide Dismutase Immobilized onto Electrodeposited Nickel Oxide Nanoparticles: Fabrication of Amperometric Superoxide Biosensor

Direct electron transfer of immobilized copper, zinc‐superoxide dismutase (SOD) onto electrodeposited nickel‐oxide (NiOx) nanoparticle modified glassy carbon (GC) electrode displays a well defined redox process with formal potential of ?0.03 V in pH 7.4. Cyclic voltammetry was used for deposition of (NiOx) nanoparticles and immobilization of SOD onto GC electrode. The surface coverage (Γ) and heterogeneous electron transfer rate constant (k_s) of immobilized SOD are 1.75×10^?11 mol cm^?2 and 7.5±0.5 s^?1, respectively. The biosensor shows a fast amperometric response (3 s) toward superoxide at a wide concentration range from 10 µM to 0.25 mM with sensitivity of 13.40 nA µM^?1 cm^?2 and 12.40 nA µM^?1 cm^?2, detection limit of 2.66 and 3.1 µM based on anodically and cathodically detection. This biosensor exhibits excellent stability, reproducibility and long life time.     

Preparation,Characterization and Electrochemical Application of Graphene‐metallic Nanocomposites

Three different Graphene‐Metallic (Graphene‐Me) nanocomposites – Graphene‐Silver (Graphene‐Ag), Graphene‐Gold (Graphene‐Au) and Graphene‐Platinum (Graphene‐Pt) nanocomposites – were prepared and characterized. The electrochemical performances of these nanocomposites were tested by incorporating them with glassy carbon paste electrode (GCPE) and used them in biofuel cells (BFC) and as amperometric xanthine biosensor transducers. Present work contains the first application of Graphene‐Au and Graphene‐Ag nanocomposite in BFCs and also first application of these Graphene‐Me nanocomposites in xanthine biosensors. Considering BFC, power and current densities were calculated as 2.03 µW cm^?2 and 167.46 µA cm^?2 for the plain BFC, 3.39 µW cm^?2 and 182.53 µA cm^?2 for Graphene‐Ag, 4.43 µW cm^?2 and 230.15 µA cm^?2 for Grapehene‐Au and 6.23 µW cm^?2 and 295.23 µA cm^?2 for Graphene‐Pt nanocomposite included BFCs respectively. For the amperometric xanthine biosensor linear ranges were obtained in the concentration range between 5 µM and 50 µM with the RSD (n=3 for 30 µM xanthine) value of 4.28 % for plain xanthine biosensor, 3 µM and 50 µM with the RSD (n=3 for 30 µM xanthine) value of 9.37 % for Graphene‐Ag, 5 µM to 20 µM with the RSD (n=3 for 5 µM xanthine) value of 9.00 % and 30 µM to 70 µM with the RSD (n=3 for 30 µM xanthine) value of 8.80 % for Grapehene‐Au and 1 µM and 70 with the the RSD (n=3 for 30 µM xanthine) value of 2.59 % for Grapehene‐Pt based xanthine biosensors respectively.     

Two new Cu(II) m-hydroxybenzoato complexes with chloro- and carboxylato-bridged dinuclear [Cu(µ2−Cl)(µ2−COO)Cu] cores

In aqueous methanolic solution, reactions of CuCl₂, m-hydroxybenzoic acid (HL), and NaOH with 2,2'-bipyridine (bpy) and 1,10-phenanthroline (phen) at room temperature afforded {[Cu(bpy)L](µ₂?Cl)(µ₂?L)[Cu(bpy)L]}?1.2H₂O (1) and {[Cu(phen)Cl](µ₂?Cl)(µ₂?L)[Cu(phen)L]} (2) with chloro- and carboxylato-bridged dinuclear [Cu(µ₂?Cl)(µ₂?COO)Cu] cores. The Cu₂ dimers in 1 are pairwise aggregated to form H-bonded tetranuclear motifs, which are extended by H₂O into 1-D H-bonded chains and further assembled into 2-D supramolecular networks. The Cu₂ dimers in 2 are also linked into 1-D H-bonded chains and further assembled into 2-D supramolecular layers. Magnetic measurements indicate that significant antiferromagnetic interactions (J = ?15.9, ?12.2 cm^?1) between Cu²⁺ ions are dominant in these dinuclear [Cu(µ₂?Cl)(µ₂?COO)Cu] cores. To the best of our knowledge, 2, crystallizing in the acentric polar orthorhombic space group Pna2₁, represents the first example of metal m-hydroxybenzoato complexes with ferroelectric properties with a remnant polarization (Pr) of ca. 0.04?µC cm^?2, coercive field (Ec) of ca. 2.52 kV cm^?1, and saturation of the spontaneous polarization (Ps) at ca. 0.195?µC cm^?2.     

Enhanced Direct Electron Transfer of a Multihemic Nitrite Reductase on Single‐walled Carbon Nanotube Modified Electrodes

Single‐walled carbon nanotubes (SWCNTs) deposits on glassy carbon and pyrolytic graphite electrodes have dramatically enhanced the direct electron transfer of the multihemic nitrite reductase from Desulfovibrio desulfuricans ATCC 27774, enabling a 10‐fold increase in catalytic currents. At optimal conditions, the sensitivity to nitrite and the maximum current density were 2.4±0.1 A L mol^?1 cm^?2 and 1500 µA cm^?2, respectively. Since the biosensor performance decreased over time, laponite clay and electropolymerized amphiphilic pyrrole were tested as protecting layers. Both coating materials increased substantially the bioelectrode stability, which kept about 90 % and 60 % of its initial sensitivity to nitrite after 20 and 248 days, respectively.