多孔碳材料的制备

多孔碳材料不仅具有碳材料化学稳定高、导电性好等优点,由于多孔结构的引入,还具有比表面积高、孔道结构丰富、孔径可调等特点,在催化、吸附和电化学储能等方面都得到了广泛的应用。本文综述了微孔、介孔、大孔及多级孔碳等多孔碳材料的最新研究进展,重点介绍了多孔碳孔道结构的调控,并对多孔碳材料的应用进行了展望。     

Recent Advances in Porous Carbon Materials for Electrochemical Energy Storage

Climate change and the energy crisis have promoted the rapid development of electrochemical energy‐storage devices. Owing to many intriguing physicochemical properties, such as excellent chemical stability, high electronic conductivity, and a large specific surface area, porous carbon materials have always been considering as a promising candidate for electrochemical energy storage. To date, a wide variety of porous carbon materials based upon molecular design, pore control, and compositional tailoring have been proposed for energy‐storage applications. This focus review summarizes recent advances in the synthesis of various porous carbon materials from the view of energy storage, particularly in the past three years. Their applications in representative electrochemical energy‐storage devices, such as lithium‐ion batteries, supercapacitors, and lithium‐ion hybrid capacitors, are discussed in this review, with a look forward to offer some inspiration and guidelines for the exploitation of advanced carbon‐based energy‐storage materials.     

Liquid-phase synthesis and application of monolithic porous materials based on organic–inorganic hybrid methylsiloxanes, crosslinked polymers and carbons

Our recent progress in porous materials based on organic–inorganic hybrids, organic crosslinked polymers, and carbons is summarized. Flexible aerogels and aerogel-like xerogels with the polymethylsilsesquioxane (PMSQ) composition are obtained using methyltrimethoxysilane (MTMS) as the sole precursor. Preparation process and the flexible mechanical properties of these aerogels/xerogels are overviewed. As the derivative materials, hierarchically macro- and mesoporous PMSQ monoliths and marshmallow-like soft and bendable porous monoliths prepared from dimethyldimethoxysilane /MTMS co-precursors have been obtained. Organic crosslinked polymer monoliths with well-defined macropores are also tailored using gelling systems of vinyl monomers under controlled/living radical polymerization. The obtained polymer monoliths are carbonized and activated into activated carbon monoliths with well-defined pore properties. The activated carbon monoliths exhibit good electrochemical properties as the monolithic electrode. Some possibilities of applications for these porous materials are also discussed.     

Recent Advances on Nitrogen-Doped Porous Carbons Towards Electrochemical Supercapacitor Applications

Due to ever-increasing global energy demands and dwindling resources, there is a growing need to develop materials that can fulfil the World's pressing energy requirements. Electrochemical energy storage devices have gained significant interest due to their exceptional storage properties, where the electrode material is a crucial determinant of device performance. Hence, it is essential to develop 3-D hierarchical materials at low cost with precisely controlled porosity and composition to achieve high energy storage capabilities. After presenting the brief updates on porous carbons (PCs), then this review will focus on the nitrogen (N) doped porous carbon materials (NPC) for electrochemical supercapacitors as the NPCs play a vital role in supercapacitor applications in the field of energy storage. Therefore, this review highlights recent advances in NPCs, including developments in the synthesis of NPCs that have created new methods for controlling their morphology, composition, and pore structure, which can significantly enhance their electrochemical performance. The investigated N-doped materials a wide range of specific surface areas, ranging from 181.5 to 3709 m² g⁻¹, signifies a substantial increase in the available electrochemically active surface area, which is crucial for efficient energy storage. Moreover, these materials display notable specific capacitance values, ranging from 58.7 to 754.4 F g⁻¹, highlighting their remarkable capability to effectively store electrical energy. The outstanding electrochemical performance of these materials is attributed to the synergy between heteroatoms, particularly N, and the carbon framework in N-doped porous carbons. This synergy brings about several beneficial effects including, enhanced pseudo-capacitance, improved electrical conductivity, and increased electrochemically active surface area. As a result, these materials emerge as promising candidates for high-performance supercapacitor electrodes. The challenges and outlook in NPCs for supercapacitor applications are also presented. Overall, this review will provide valuable insights for researchers in electrochemical energy storage and offers a basis for fabricating highly effective and feasible supercapacitor electrodes.     

衍生多孔碳材料在固相微萃取中的应用研究进展

固相微萃取是一种集采样、萃取、富集和进样于一体的样品前处理技术,其萃取效果与涂层材料密切相关。多孔碳材料具有比表面积大、多孔结构可控、活性位点多和化学稳定性好等优点,广泛应用于电池、超级电容器、催化、吸附和分离等领域,也是一种热门的用作固相微萃取探针的涂层材料。衍生多孔碳材料因种类丰富、可设计性强被广泛研究,研究主要集中在对衍生多孔碳材料的结构优化方面。但是衍生多孔碳材料在固相微萃取中的应用还存在如下问题:(1)共价有机框架衍生多孔碳材料的制备已取得较大进展,但将其应用于固相微萃取领域的研究仍较少;(2)有待进一步明确制备出的衍生多孔碳材料用作固相微萃取涂层表现出优异提取能力的机理;(3)有待进一步深入研究将衍生多孔碳材料用作固相微萃取涂层以实现对不同物理化学性质污染物的广谱高灵敏度分析。文章综述了近3年衍生多孔碳材料在固相微萃取中的应用研究,并展望了未来衍生多孔碳材料在固相微萃取中的研究前景。引用文献共56篇,主要来源于Elsevier。     

由微孔棒状羟基磷灰石为模板合成的新型层次孔炭材料的电化学电容性能

电化学电容器已经成为极具潜力的可满足高功率需求的储能系统器件. 多孔炭具有大比表面积、高导电性、化学惰性、廉价及可调孔结构等优势, 因此成为电化学电容器最为常用的电极材料. 本文报道由微孔棒状羟基磷灰石为模板及蔗糖为碳源合成的新型具有层次孔道结构的孔炭材料的电化学电容器的性能. 采用X射线衍射分析仪、扫描电子显微镜、透射电子显微镜、X射线光电子能谱及BET表面分析仪表征了合成的多孔炭的形貌及表面特性. 采用循环伏安法、交流阻抗图谱分析及恒流充放电评价多孔炭材料在1 mol·L^-1硫酸中的电化学电容性能. 多孔炭具有高的比表面积(719.7 m²·g^-1)和大的孔容(1.32 cm³·g^-1), 其无序的孔道由任意分布的微孔、坍塌的中孔及类模板形状的相互交织的棒状中孔组成. 随着炭化温度的增加, 微孔及棒状中孔的密度随之降低, 在炭化温度高达900℃时, 孔径分布图上出现了三个峰. 正是由于这些特殊的结构特征, 由900℃炭化得到的多孔炭制成的电极展示出很好的电化学电容性能.     

N-doped honeycomb-like porous carbon towards high-performance supercapacitor

Biomass-derived porous carbon with developed pore structure is critical to achieving high performance electrode materials. In this work, we report a grape-based honeycomb-like porous carbon (GHPC) prepared by KOH activation and carbonization, followed by N-doping (NGHPC). The obtained NGHPC exhibits a unique honeycomb-like structure with hierarchically interconnected micro/mesopores, and high specific surface area of 1268 m²/g. As a supercapacitor electrode, the NGPHC electrode exhibits a remarkable specific capacitance of 275 F/g at 0.5 A/g in a three-electrode cell. Moreover, the NGHPC//NGHPC symmetric supercapacitor displays a high energy density of 12.6 Wh/kg, and excellent cycling stability of approximately 95.2% capacitance retention after 5000 cycles at 5 A/g. The excellent electrochemical performance of NGHPC is ascribed to its high specific surface area, honeycomb-like structure and high-content of pyrodinic-N (36.29%). It is believed that grape-based carbon materials show great potential as advanced electrode materials for supercapacitors.     

金属-有机框架衍生的中空碳材料及其在电化学能源存储与氧还原领域中的应用

金属-有机框架材料(metal-organic frameworks,MOFs)是一类由金属离子或金属团簇与有机配体通过配位键连接形成的具有周期性网络结构的多孔配位聚合物。这类材料通常具有孔道规整、比表面积大、孔隙率高、结构可设计及孔壁易修饰等特点,诸多的优点使得MOFs的研究从配位化学跨越到多个学科领域,成为当前多学科交叉前沿热点之一。近来的研究发现,以MOFs为前驱体碳化后制得的碳材料可保留MOFs的大比表面积和多孔结构,同时可以实现均匀的杂原子(如N、P、S、B等)掺杂,而且通过选择合适的MOFs前驱体可调控产物的组成和形貌尺寸,这些显著的结构特征使其具备了成为高性能功能性材料的潜力。最近,以MOFs为模板或前驱体制备的中空碳材料引起了人们的广泛关注,这主要是因为中空结构可有效缓解材料在电化学过程中产生的体积变化及受到的冲击,而且中空结构可暴露出更多的活性位点,具有快速的传质过程,使得材料发挥出最优性能,故而此类材料可被用在二次电池、电容器、电催化等多种电化学器件和多个领域中。基于此,本文综述了MOFs衍生的中空碳材料在储能器件及电催化领域的研究进展,主要包括锂离子电池、锂硫/硒电池、钠离子电池、超级电容器、电催化氧还原等领域,并对这类材料当前面临的挑战及未来的发展趋势进行了阐述。     

Dual-Templating Approaches to Soybeans Milk-Derived Hierarchically Porous Heteroatom-Doped Carbon Materials for Lithium-Ion Batteries

Biomass derived carbon materials are widely available, cheap and abundant resources. The application of these materials as electrodes for rechargeable batteries shows great promise. To further explore their applications in energy storage fields, the structural design of these materials has been investigated. Hierarchical porous heteroatom-doped carbon materials (HPHCs) with open three-dimensional (3D) nanostructure have been considered as highly efficient energy storage materials. In this work, biomass soybean milk is chosen as the precursor to construct N, O co-doped interconnected 3D porous carbon framework via two approaches by using soluble salts (NaCl/Na₂CO₃ and ZnCl₂/Mg₅(OH)₂(CO₃)₄, respectively) as hard templates. The electrochemical results reveal that these structures were able to provide a stable cycling performance (710 mAh ⋅ g⁻¹ at 0.1 A ⋅ g⁻¹ after 300 cycles for HPHC-a, and 610 mAh ⋅ g⁻¹ at 0.1 A ⋅ g⁻¹ after 200 cycles for HPHC-b) in Li-ion battery and Na-ion storage (210 mAh ⋅ g⁻¹ at 0.1 A ⋅ g⁻¹ after 900 cycles for HPHC-a) as anodes materials, respectively. Further comparative studies showed that these improvements in HPHC-a performance were mainly due to the honeycomb-like structure containing graphene-like nanosheets and high nitrogen content in the porous structures. This work provides new approaches for the preparation of hierarchically structured heteroatom-doped carbon materials by pyrolysis of other biomass precursors and promotes the applications of carbon materials in energy storage fields.     

植物基多孔炭材料在超级电容器中的应用

植物基多孔炭具有发达的孔结构、大的表面积、较为成熟的制备工艺、丰富的来源、低廉的价格,是目前商业应用范围最广的超级电容器电极材料。然而在实际应用中仍然存在着质量/体积比容量较低、倍率性能差等问题。本文针对先进电容器件的高能量密度、优异功率性能的要求,首先介绍了近年来发展的植物基多孔炭的制备方法,讨论了植物前驱体的组成和结构对其产物结构的影响以及与其电化学性能之间的构效关系,特别总结了近年来植物基超大比表面积多孔炭、中孔炭、层次化多孔炭的制备方法和电容储能性能。针对大比表面积多孔炭用于超级电容器时的体积性能不佳这一关键问题,本文还总结了提高植物基多孔炭体积电化学性能的方法。最后,对植物基多孔电极材料存在的问题进行了分析与总结,并展望了其研究前景。     

Atomic Fe-N_4 sites on electrospun hierarchical porous carbon nanofibers as an efficient electrocatalyst for oxygen reduction reaction

Porous carbon materials doped with atomically dispersed metal sites(ADMSs) are promising electrocatalysts for oxygen reduction reaction(ORR) electrocatalysis.In this work,we fabricated hierarchical porous nitrogen-doped carbon nanofibers with atomically dispersed Fe-N_4 sites by carbonization of electrospinning iron-based metal-organic frameworks(MOFs)/polyacrylonitrile nanofibers for ORR electrocatalysis.Remarkably,the re sultant carbon nanofibers with atomically dispersed FeN_4 sites exhibit extraordinary electrochemical performance with an onset potential of 0.994 V and a halfwave potential of 0.876 V in alkaline electrolyte,comparable to the benchmark commercial Pt/C catalyst.The high catalytic performance is originated from the unique hierarchically porous 1 D carbon structure and abundant highly active atomically dispersed Fe-N_4 sites.     

A Template‐Free Method for Preparation of Cobalt Nanoparticles Embedded in N‐Doped Carbon Nanofibers with a Hierarchical Pore Structure for Oxygen Reduction

Designing and preparing porous materials without using any templates is a challenge. Herein, single‐nozzle electrospinning technology coupled with post pyrolysis is applied to prepare cobalt nanoparticles embedded in N‐doped carbon nanofibers with a hierarchical pore structure (HP‐Co‐NCNFs). The resultant HP‐Co‐NCNFs have lengths up to several millimeters with an average diameter of 200 nm and possess abundant micro/meso/macropores on both the surface and within the fibers. Such a microstructure endows the surface area as high as 115 m² g^?1. When used as an electrocatalyst for the oxygen reduction reaction (ORR), the HP‐Co‐NCNFs exhibit outstanding electrochemical performance in terms of activity, methanol tolerance, and durability. The hierarchically porous structure and high surface area can effectively decrease the mass transport resistance and increase the exposed ORR active sites. The sufficient amount of exposed ORR active sites along with accessible transport channel and enhanced electrical conductivity may be responsible for the good electrocatalytic performance.     

Lignin derived porous carbon with favorable mesoporous contributions for highly efficient ionic liquid-based supercapacitors

Lignin and its derivatives hold great potential in developing high performance porous carbon materials for supercapacitors due to the versatile features of high carbon content, abundant multifunctional groups, low cost, and environmental benefits. Unfortunately, their derived porous carbon generally has the features of unfavorable microporous-dominated morphologies and low specific surface area (SSA) attributed from the highly-branched structure of lignin, which are hardly suitable for the supercapacitors with ionic liquid (IL) electrolyte, leading to poor energy density and rate capability. Herein, porous carbon materials with desirable mesoporous contributions from sodium lignosulphonate are designed via a facile template method. Such rich mesoporisity carbon materials not only possess with three-dimensional interconnected network, large SSA, as well as favorable pore size distribution for accelerated ion and electron mass transfer, but also feature low heteroatom content for high electrochemical stability. Consequently, the optimal electrode exhibits a high capacitance of 166 F/g at 0.5 A/g, superior rate performance (59 Wh/kg at 59 kW/kg), as well as impressive cycle life with good capacitance retention of 93.1% in EMIBF₄ electrolytes. The present work opens a new avenue to design porous carbon materials with high mesopore properties from lignin for effective compatibility with IL electrolyte in high-performance supercapacitors.     

A review on the development of a porous carbon-based as modeling materials for electric double layer capacitors

Carbon electrodes are a key factor for electric double layer capacitors (EDLCs). Carbon gels have high porosity with a controllable pore structure by changing synthesis conditions and modifying preparation processing to improve the electrochemical performance of EDLCs. This review summarizes the preparation of carbon gels and their derivatives, the criteria to synthesize high surface area in each process, the development by some carbon forms, and EDLC applications. Porous carbons are also prepared as model materials by concentrating on how pore structure increases electrochemical capacitance, such as electronic and ion resistance, the tortuosity of pore channel, suitable micropore and mesopore sizes, and mesopore size distribution. This review emphasizes the significance of pore structures as the key factor to allow for the design of suitable pore structures that are suitable as the carbon electrode for EDLCs.     

Hierarchically Porous Carbons Derived from Metal–Organic Framework/Chitosan Composites for High‐Performance Supercapacitors

Hierarchically porous carbon materials with high surface areas are promising candidates for energy storage and conversion. Herein, the facile synthesis of hierarchically porous carbons through the calcination of metal–organic framework (MOF)/chitosan composites is reported. The effects of the chitosan (CS) additive on the pore structure of the resultant carbons are discussed. The corresponding MOF/chitosan precursors could be readily converted into hierarchically porous carbons (NPC‐V, V=1, 2, 4, and 6) with much higher ratios of meso‐/macropore volume to micropore volume (V_meso‐macro/V_micro). The derived carbon NPC‐2 with the high ratio of V_meso‐macro/V_micro=1.47 demonstrates a high specific surface area of 2375 m² g^?1, and a high pore volume of 2.49 cm³ g^?1, as well as a high graphitization degree, in comparison to its counterpart (NPC) without chitosan addition. These excellent features are favorable for rapid ion diffusion/transport, endowing NPC‐2 with enhanced electrochemical behavior as supercapacitor electrodes in a symmetric electrode system, corresponding to a high specific capacitance of 199.9 F g^?1 in the aqueous electrolyte and good rate capability. Good cycling stability is also observed after 10 000 cycles.     

Thermal Transition of Bimetallic Metal–Phenolic Networks to Biomass‐Derived Hierarchically Porous Nanofibers

The development and utilization of biomass resources could contribute to new materials for long‐term sustainable energy storage and environmental applications, reduce environmental impacts, and meet the urgent need for green and sustainable development strategies. Herein, a bimetallic metal–phenolic network (MPN) was applied to incorporate different metallic element species into cattle skin and fabricate collagen‐fiber‐derived complex oxide nanofibers using natural polyphenols (Myrica tannins). Direct thermal transition of these biomass–MPN composites generates hierarchically porous nanofibers possessing micro‐ and mesoporous architectures along with a well‐preserved macroscopic structure. The pore system and complex oxide composition provide excellent photocatalytic performance. This low‐cost, simple, and readily scalable MPN‐based approach provides a straightforward route to synthesize nanostructured materials directly from biomass, which could play important roles in a wide range of potential applications.     

Hierarchically imprinted porous films for rapid and selective detection of explosives

On the basis of the combination of colloidal and mesophase templating, as well as molecular imprinting, a general and effective approach for the preparation of hierarchically structured trimodal porous silica films was developed. With this new methodology, controlled formation of well-defined pore structures not only on macro- and mesoscale but also on microscale can be achieved, affording a new class of hierarchical porous materials with molecular recognition capability. As a demonstration, TNT was chosen as template molecule and hierarchically imprinted porous films were successfully fabricated, which show excellent sensing properties in terms of sensitivity, selectivity, stability, and regeneracy. The pore system reported here combines the multiple benefits arising from all length scales of pore size and simultaneously possesses a series of distinct properties such as high pore volume, large surface area, molecular selectivity, and rapid mass transport. Therefore, our described strategy and the resulting pore systems should hold great promise for various applications not only in chemical sensors, but also in catalysis, separation, adsorption, or electrode materials.     

核壳结构金属-有机骨架及其衍生物在锂离子电池负极材料中的应用

金属–有机框架(MOFs)材料具有比表面积较大、孔径可调、制备容易、结构与功能多样性等优势,被广泛应用于电化学能源转化与储存领域。其中独特的核壳结构材料由于表面修饰的作用往往更能表现出核内与壳层的协同作用。本文介绍了具有核壳结构MOFs作为锂离子电池负极材料的发展现状,并重点综述其衍生物(多孔碳材料、金属氧化物、金属硫/硒化物以及金属/金属氧化物)的制备方法以及在锂离子电池负极中的应用。MOFs通过高温煅烧或改变化学反应条件的方法,可制备出结构可调的传统无机电极材料并表现出更优异的电化学性能。最后总结了核壳结构MOFs材料作为锂电负极材料存在的问题和挑战,并提出可能的解决途径和未来的应用前景。     

Self-formation phenomenon to hierarchically structured porous materials: design, synthesis, formation mechanism and applications

In this paper, we will thoroughly review a novel and versatile self-formation phenomenon that can be exploited to target porous hierarchies of materials without need of any external templates only on the basis of the chemistry of metal alkoxides and alkylmetals. These hierarchically porous materials have unique structures, which are made of either parallel funnel-like/straight macrochannels or 3D continuous interconnected macroporous foams with micro/mesoporous walls. The self-generated porogen mechanism has been proposed, leading to a series of techniques to tailor porous hierarchy, i.e. the use of different chemical precursors (single metal alkoxides, mixed metal alkoxides, single molecular precursors with two different alkoxide functionalities, alkylmetals, etc., …), the control of their hydrolysis and condensation rates (pH, chelating agents,…) and the addition of alkoxysilanes as co-reactant. Various chemical compositions from single or binary metal oxides, to aluminosilicates, aluminophosphates, silicoaluminophosphates, metallophosphates,… can be prepared, offering a panel of potential applications. Some perspectives have been proposed to transform the synthesized materials with a hierarchy of pore sizes to micro-meso-macroporous crystalline materials with zeolite architectures. The advantages of this self-formation preparation method have been discussed compared to traditional templating methods. The possibility to combine with other strategies, for example soft or hard templating, to target even more sophisticated hierarchically meso-macroporous materials with specific structure and function for various applications has been presented. The "hierarchical catalysis" concept has been re-visited.     

纤维素纳米晶模板法制备多级孔炭材料及其电化学性能

以纤维素纳米晶(CNC)为模板,酚醛树脂为碳源,KOH为活化剂,通过高温碳化制备了多级孔炭材料.采用透射电子显微镜(TEM)、扫描电子显微镜(SEM)和X射线光电子能谱仪(XPS)等手段对合成的一系列炭材料进行了表征.结果表明,前驱体中CNC的降解会形成与CNC直径相当的介孔,KOH活化则会导致炭材料产生大量的微孔和大孔,以及部分4 nm左右较小尺度的介孔,所制备炭材料呈现明显的多级孔特性,其比表面积达554.7 m²/g,总孔体积为0.323 cm³/g.以CNC为模板,KOH活化的炭材料作为电极材料时,在1.0 A/g电流密度下其比电容达202.8 F/g,当电流密度升高至40.0 A/g时,其电容保持率仍达69%,表明该炭材料具有优异的倍率性能;由该电极材料组装的超级电容器在10000次充放电循环后,电容保持率达95%以上,具有良好的循环稳定性.