Fluorometric quantification of total d-gluconate by a flow-injection system using an immobilized-enzyme reactor

A method for the quantification of total d-gluconate by flow-injection analysis was developed using an immobilized-enzyme reactor and fluorescence detection. d-Gluconate was quantified using co-immobilized gluconate kinase (GK) and 6-phosphogluconate dehydrogenase (PGDH) reactor. d-Gluconate was phosphorylated to 6-phospho-d-gluconate by GK in the presence of ATP, and then the 6-phospho-d-gluconate produced was oxidized by PGDH with NADP⁺. The NADPH produced by the GK-PGDH reactor was monitored fluorometrically at 455 nm (excitation at 340 nm). A linear relationship between the responses and concentrations of d-gluconate was obtained in the ranges of 1.0 × 10⁻⁶–1.6 × 10⁻⁴ M. The relative standard deviation for 10 successive injections was 0.57% at the 0.1 mM level. This analytical method was applied to the quantification of d-gluconate in honeys, vinegars and noble rot wines, and the results showed good agreement with those obtained using the conventional F-kit method.     

Sequential fluorometric quantification of malic acid enantiomers by a single line flow-injection system using immobilized-enzyme reactors

A method for the sequential enantiomeric quantification of d-malate and l-malate by a single line flow-injection analysis was developed using immobilized-enzyme reactors and fluorescence detection. An immobilized d-malate dehydrogenase (d-MDH) reactor and an immobilized l-malate dehydrogenase (l-MDH) reactor were introduced into the flow line in series. Sample and coenzyme (NAD⁺ or NADP⁺) were injected into the flow line by an open sandwich method. d-Malate was selectively oxidized by d-MDH when NAD⁺ was injected with a sample. When NADP⁺ was injected with a sample, l-malate was oxidized only by l-MDH. NADH or NADPH produced by the immobilized-enzyme reactors was monitored fluorometrically at 455 nm (excitation at 340 nm). Linear relationships between the responses and concentrations of d-malate and l-malate were observed in the ranges of 1 × 10⁻⁶-1 × 10⁻⁴ M and 1 × 10⁻⁶-2 × 10⁻⁴ M, respectively. The relative standard deviations for ten successive injections were less than 2% at the 0.1 mM level. This analytical method was applied to the sequential quantification of d-malate and l-malate in fruit juices and soft drinks, and the results showed good agreement with those obtained using conventional method (F-kit method).     

Sequential fluorometric quantification of γ-aminobutyrate and l-glutamate using a single line flow-injection system with immobilized-enzyme reactors

A single line flow-injection system with immobilized-enzyme reactors is proposed for the sequential quantification of γ-aminobutyrate (GABA) and l-glutamate. A co-immobilized l-glutamate oxidase and catalase reactor and an immobilized GABase reactor were introduced into the flow line in series. Sample and reagent were injected into the flow line using an open sandwich method. GABA was selectively detected by GABase when α-ketoglutarate at a high concentration and NADP⁺ were injected as the reagents with a sample. When GABA at a high concentration and NADP⁺ were injected as the reagents with a sample, l-glutamate only was determined by the series of enzymatic reactions. NADPH produced by the immobilized-enzyme reactors was monitored fluorometrically at 455 nm (excitation at 340 nm). Linear relationships between the responses and concentrations of GABA or l-glutamate were observed in the ranges of 5.0 × 10⁻⁶-5.0 × 10⁻⁴ M and 1.0 × 10⁻⁵-5.0 × 10⁻⁴ M, respectively. The relative standard deviations for ten successive injections were less than 2% at the 0.5 mM level. This analytical method was applied to the sequential quantification of GABA and l-glutamate that were produced and consumed, respectively, by lactic acid bacteria, and the results showed good agreement with those obtained using liquid chromatography.     

Flow-injection fluorometric quantification of pyruvate using co-immobilized pyruvate decarboxylase and aldehyde dehydrogenase reactor: Application to measurement of acetate, citrate and l-lactate

A flow-injection system for the quantification of pyruvate based on the coupled reactions of pyruvate decarboxylase (PDC) and aldehyde dehydrogenase (AlDH) was conceived and optimized. A co-immobilized PDC and AlDH reactor was introduced into the flow line. Sample and reagent (NAD⁺) were injected into the flow line by an open sandwich method and the increase of NADH produced by the immobilized-enzyme reactor was monitored fluorometrically at 455 nm (excitation at 340 nm). Linear relationships between the responses and concentrations of pyruvate were observed in the ranges of 2.0 × 10⁻⁵ to 1.5 × 10⁻³ M at the flow rate of 1.0 ml min⁻¹ and 5.0 × 10⁻⁶ to 1.0 × 10⁻³ M at the flow rate of 0.5 ml min⁻¹. The relative standard deviation for 10 successive injections was 0.95% at the 1.0 mM level. This FIA system for pyruvate was applied to the measurement of acetate, citrate and l-lactate.     

Determination of melamine in different milk batches using a novel chemosensor based on the luminescence quenching of Ru(II) carbonyl complex

A novel, simple, sensitive and precise spectrofluorimetric method was developed for measuring the melamine concentration in different milk batch samples. The method was based upon measuring the quenching of the luminescence intensity of the produced yellow colored ruthenium^(II) carbonyl complex of the general formula [Ru(CO)₂(L)] (where L = anion of tetradentate Schiff base). The Ru^(II) complex exhibited characteristic luminescence band in the visible region. The remarkable quenching of the luminescence intensity of [Ru(CO)₂(L)] complex by various concentrations of melamine was successfully used as a chemosensor for the assessment of melamine in different milk samples at λ_ex = 400 nm and pH 7.4 in DMSO with a linear dynamic range 1.0 × 10⁻⁶ to 3.0 × 10⁻⁹ mol L⁻¹ and lower detection limit (LOD) and quantification detection limit (QOD) of 3.3 × 10⁻¹⁰ and 1.0 × 10⁻⁹ mol L⁻¹, respectively.     

Determination of 6-mercaptopurine based on the fluorescence enhancement of Au nanoparticles

A novel method for the determination of 6-mercaptopurine (6MP) has been developed based on fluorescence enhancement of Au nanoparticles (AuNPs). The fluorescent AuNPs with mean diameter of ∼15 nm were synthesized in aqueous solution, exhibiting the stable maximum emission at 367 nm, under the excitation at wavelength of 264 nm. The AuNPs self-assembly with 6MP were characterized with transmission electron microscopy (TEM), ultraviolet-visible (UV-vis) absorption, fluorescence and surface-enhanced Raman scattering (SERS) spectroscopy. The results revealed that the surface attachment through versatile binding sites of S10, N3, N9 and N7 atoms in 6MP produced the interparticle coupling and formed aggregates of AuNPs. As a result, the fluorescence emission enhancement was significantly observed upon AuNPs self-assembly with 6MP. The fluorimetric determination under optimal conditions indicated that 6MP could be quantified in good linearity range of 6.35 × 10⁻⁸ to 3.05 × 10⁻⁷ M, with a low detection limit of 4.82 × 10⁻¹⁰ M. The relative standard deviation (n = 11) was 1.8% at 2.54 × 10⁻⁸ M 6MP concentration level. The proposed method was successfully applied for the determination of 6MP in spiked human urine. The probable fluorescence enhancement mechanism was also discussed there.     

Quantification of hemorphin-7 peptides by enzyme linked immunosorbent assay with secondary antibody

This paper describes an enzyme linked immunosorbent assay (ELISA) for the quantification of bioactive peptides: hemorphin-7 peptides (LVV-hemorphin-7, VV-hemorphin-7 and hemorphin-7) using an anti-rabbit secondary antibody conjugated to peroxidase for sandwich antibody assay. Bovine serum albumin (BSA) conjugated to VV-hemorphin-7 was readily coated on a polystyrene microplate. Data acquisition on microtiter wells is performed by an ELISA reader. The standard curve was produced for 1×10⁻¹³ to 2×10⁻⁵ M VV-hemorphin-7. The minimum detectable amount of VV-hemorphin-7 is 5×10⁻¹³ mol and the relative standard deviation was 8.8% for a 1×10⁻⁶ M sample (n=8). The ELISA procedure was selective with respect to structurally similar compounds. This method was applied to quantify hemorphin-7 peptides in bovine plasma.     

Durable diagnosis of seminal vesicle and sexual gland diseases using the nano optical sensor thin film Sm-doxycycline complex

A new method in which a nano optical sensor for diagnosis of different diseases of seminal vesicle and sexual gland was prepared. The working principle of the method depends on the determination of the fructose concentration in semen of different patients by using nano optical sensor thin film Sm-doxycycline doped in sol–gel matrix. The assay is based on the quenching of the characteristic emission bands of Sm³⁺ present in silica doped Sm-doxycycline nanooptode thin film by different fructose concentrations in acetonitrile at λ_ex = 400 nm. This method was optimized for parameters, such as, solvent effect, operational stability, shelf life and interference parameters. Good and reproducible linearity (1 × 10⁻⁹ – 5.0 × 10⁻⁵ mol L⁻¹) with a detection limit of 9.0 × 10⁻¹⁰ mol L⁻¹ and quantification limit of detection (LOQ) 2.7 × 10⁻⁹ mol L⁻¹ were obtained. Seminal fructose determination in different patient samples after appropriate dilutions confirmed the reliability of this technique. The method was successfully applied for routine fructose monitoring in human semen samples of different cases such as; obstructive and non-obstructive azoospermia, inflammation of male accessory glands, atrophy of seminal vesicle, congenital vas deferens and retrograde ejaculation.     

Ultrasensitive determination of silver ion based on synchronous fluorescence spectroscopy with nanoparticles

Based on the characteristics of synchronous fluorescence spectroscopy (SFS), a new method with high sensitivity and selectivity was developed for rapid determination of silver ion with functional cadmium sulphide (CdS) nanoparticles as a fluorescence probe. When Δλ (λ_em − λ_ex) = 215 nm, maximum synchronous fluorescence is produced at 304 nm. Under optimal conditions, functional cadmium sulphide displayed a calibration response for silver ion over a wide concentration range from 0.8 × 10⁻¹⁰ to 1.5 × 10⁻⁸ mol L⁻¹. The limit of detection was 0.4 × 10⁻¹⁰ mol L⁻¹ and the relative standard deviation of seven replicate measurements for the lowest concentration (0.8 × 10⁻¹⁰ mol L⁻¹) was 2.8%. Compared with several fluorescence methods, the proposed method had a wider linear range and improved the sensitivity. Furthermore, the concentration dependence of the synchronous fluorescence intensity is effectively described by a Langmuir-type binding isotherm.     

Determination of naproxen in human urine by high-performance liquid chromatography with direct electrogenerated chemiluminescence detection

A simple and sensitive liquid chromatographic method coupled with electrogenerated chemiluminescence (ECL) was described for the separation and quantification of naproxen in human urine. The method was based on the ECL of naproxen in basic NaNO₃ solution with a dual-electrode system. Factors affected the ECL emission were investigated. Under the optimal conditions, the ECL intensity has a linear relationship with the concentration of naproxen in the range of 4.0 × 10⁻⁸ g mL⁻¹ to 2.0 × 10⁻⁶ g mL⁻¹ and the detection limit was 1.6 × 10⁻⁸ g mL⁻¹ (S/N = 3). Application of the method to the analyses of naproxen in human urine proved feasible.     

Integrated multienzyme electrochemical biosensors for the determination of glycerol in wines

The construction and performance of integrated amperometric biosensors for the determination of glycerol are reported. Two different biosensor configurations have been evaluated: one based on the glycerol dehydrogenase/diaphorase (GDH/DP) bienzyme system, and another using glycerol kinase/glycerol-3-phosphate oxidase/peroxidase (GK/GPOx/HRP). Both enzyme systems were immobilized together with the mediator tetrathiafulvalene (TTF) on a 3-mercaptopropionic acid (MPA) self-assembled monolayer (SAM)-modified gold electrode by using a dialysis membrane. The electrochemical oxidation of TTF at +150 mV (vs. Ag/AgCl), and the reduction of TTF⁺ at 0 mV were used for the monitoring of the enzyme reactions for the bienzyme and trienzyme configurations, respectively. Experimental variables concerning both the biosensors composition and the working conditions were optimized for each configuration. A good repeatability of the measurements with no need of cleaning or pretreatment of the biosensors was obtained in both cases. After 51 days of use, the GDH/DP biosensor still exhibited 87% of the original sensitivity, while the GK/GPOx/HRP biosensor yielded a 46% of the original response after 8 days. Calibration graphs for glycerol with linear ranges of 1.0 × 10⁻⁶ to 2.0 × 10⁻⁵ or 1.0 × 10⁻⁶ to 1.0 × 10⁻⁵ M glycerol and sensitivities of 1214 ± 21 or 1460 ± 34 μA M⁻¹ were obtained with GDH/DP and GK/GPOx/HRP biosensors, respectively. The calculated detection limits were 4.0 × 10⁻⁷ and 3.1 × 10⁻⁷ M, respectively. The biosensors exhibited a great sensitivity with no significant interferences in the analysis of wines. The biosensors were applied to the determination of glycerol in 12 different wines and the results advantageously compared with those provided by a commercial enzyme kit.     

11-Molybdobismuthophosphate—A new reagent for the determination of ascorbic acid in batch and sequential injection systems

The guanidinium salt of the new heteropolymolybdate 11-molybdobismuthophosphate Gua₆PBiMo₁₁O₄₀ (11-MBP) was synthesized, characterized and used as a reagent for batch spectrophotometric (SP) and sequential injection determination of ascorbic acid (AsA). When compared to other Keggin's heteropolyanions, the reduction of 11-MBP with AsA is both fast and maximal within a pH range of 1.6-2.0. The stoichiometry of the reaction was determined using molar ratio and continuous variation methods and was shown to be 1:1. The molar absorptivity of the reduced form of 11-MBP was 6.0 × 10³ L mol⁻¹ cm⁻¹ at 720 nm. The reaction is also specific for AsA. Only cysteine, hydroquinone and hydroxyacids were found to interfere with the reaction, while no interference was observed with the common reducing agents, including reducing sugars, catecholamines, nitrite, sulfite and iron(II) ions. Batch SP and sequential injection analysis (SIA) systems were developed for the determination of AsA, with calibration ranges of the SP methods at 2 × 10⁻⁶-8 × 10⁻⁵ M for a 10 mm cell and 5 × 10⁻⁷-3 × 10⁻⁵ M for a 50 mm cell and a limit of detection at 3 × 10⁻⁷ M. The linear range of the SIA method was 6 × 10⁻⁶-5 × 10⁻⁴ M, with a detection limit of 2 × 10⁻⁶ M and a sample throughput of 15 h⁻¹. The proposed methods were successfully used for the determination of AsA in both pharmaceuticals and fruit juices, and the results were consistent with those provided by the 2,6-dichlorophenolindophenol method.     

Flow-injection turbidimetric determination of homatropine methylbromide in pharmaceutical formulations using silicotungstic acid as precipitant reagent

A flow-injection turbidimetric procedure exploiting merging zones is proposed for determining homatropine methylbromide (HMB) in pharmaceutical preparations. The determination is based on the precipitation reaction of homatropine methylbromide with silicotungstic acid in acidic medium to form a precipitate, which was measured at 410 nm. The analytical curve was linear in the HMB concentration range from 8.1 × 10⁻⁵ to 2.2 × 10⁻⁴ mol l⁻¹, with a detection limit of 5.0 × 10⁻⁶ mol l⁻¹. The recoveries ranged from 96 to 103%, the sampling frequency was 70 determinations per hour and relative standard deviations were less than 1.5% (n = 10). The results obtained for commercial formulations using the FIA procedure were in good agreement with those obtained by using a comparative method.     

Preliminary evaluation of monolithic column high-performance liquid chromatography with tris(2,2′-bipyridyl)ruthenium(II) chemiluminescence detection for the determination of quetiapine in human body fluids

High-performance liquid chromatography (HPLC) with tris(2,2′-bipyridyl)ruthenium(II) chemiluminescence detection methodology is reported for the determination of the atypical antipsychotic drug quetiapine and the observation of its major active and inactive metabolites in human urine and serum. The method uses a monolithic chromatographic column allowing high flow rates of 3 mL min⁻¹ enabling rapid quantification. Flow injection analysis (FIA) with tris(2,2′-bipyridyl)ruthenium(II) chemiluminescence detection and HPLC time of flight mass spectrometry (TOF-MS) were used for the determination of quetiapine in a pharmaceutical preparation to establish its suitability as a calibration standard. The limit of detection achieved with FIA was 2 × 10⁻¹¹ mol L⁻¹ in simple aqueous solution. The limits of detection achieved with HPLC were 7 × 10⁻⁸ and 2 × 10⁻¹⁰ mol L⁻¹ in urine and serum, respectively. The calibration range for FIA was between 5 × 10⁻⁹ and 1 × 10⁻⁶ mol L⁻¹. The calibration ranges for HPLC were between 1 × 10⁻⁷-1 × 10⁻⁴ and 1 × 10⁻⁸-1 × 10⁻⁴ mol L⁻¹ in urine and serum, respectively. The quetiapine concentrations in patient samples were found to be 3 × 10⁻⁶ mol L⁻¹ in urine and 7 × 10⁻⁷ mol L⁻¹ in serum. Without the need for preconcentration, the HPLC detection limits compared favourably with those in previously published methodologies. The metabolites were identified using HPLC-TOF-MS.     

Quantum dot-enhanced chemiluminescence detection for simultaneous determination of dopamine and epinephrine by capillary electrophoresis

A sensitive method based on quantum dot (QD)-enhanced capillary electrophoresis-chemiluminescence (CE-CL) detection was developed for simultaneous determination of dopamine (DA) and epinephrine (E). In this work, CdTe QD was added into the running buffer of CE to catalyze the post-column CL reaction between luminol and hydrogen peroxide, achieving higher CL emission. Negative peaks were produced due to the inhibitory effects on CL emission from DA and E eluted from the electrophoretic capillary. The decrease in CL intensity was proportional to the concentration of DA and E in the range of 8.0 × 10⁻⁸-5.0 × 10⁻⁶ M and 4.0 × 10⁻⁸-5.0 × 10⁻⁶ M, respectively. Detection limits for DA and E were 2.3 × 10⁻⁸ M and 9.3 × 10⁻⁹ M, respectively. Using this method, the levels of DA and E in human urine from healthy donors were determined.     

An emphatic orthogonal signal correction-support vector machine method for the classification of tissue sections of endometrial carcinoma by near infrared spectroscopy

A sequential injection analysis (SIA) spectrophotometric method for determining tetracycline (TC), chlortetracycline (CTC) and oxytetracycline (OTC) in different sample matrices were described. The method was based on the reaction between tetracyclines and yttrium (III) in weak basic micellar medium, yielding the light yellow complexes, which were monitored at 390, 392 and 395 nm, respectively. A cationic surfactant, cetyltrimethylammonium bromide (CTAB) was used to obtain the micellar system. The linear ranges of calibration graphs were between 1.0 × 10⁻⁵ and 4 × 10⁻⁴ mol L⁻¹, respectively. The molar absorptivities were 5.24 × 10⁵, 4.98 × 10⁴ and 4.78 × 10⁴ L mol⁻¹ cm⁻¹. The detection limits (3σ) were between 4.9 × 10⁻⁶ and 7.8 × 10⁻⁶ mol L⁻¹ whereas the limit of quantitations (10σ) were between 1.63 × 10⁻⁵ and 2.60 × 10⁻⁵ mol L⁻¹ the interday and intraday precisions within a weak revealed as the relative standard deviations (R.S.D., n = 11) were less than 4%. The method was rapid with a sampling rate of over 60 samples h⁻¹ for the three drugs. The proposed method has been satisfactorily applied for the determination of tetracycline and its derivatives in pharmaceutical preparations together with their residues in milk and honey samples collected in Chiang Mai Province. The accuracy was found to be high as the Student's t-values were found to be less than the theoretical ones. The results were compared favorably with those obtained by the conventional spectrophotometric method.     

Dual-wavelength β-correction spectrophotometric determination of trace concentrations of cyanide ions based on the nucleophilic addition of cyanide to imine group of the new reagent 4-hydroxy-3-(2-oxoindolin-3-ylideneamino)-2-thioxo-2H-1,3-thiazin-6(3H)-one

A simple, fast, low cost and sensitive direct β-correction spectrophotometric assay of cyanide ions based on its reaction with the reagent 4-hydroxy-3-(2-oxoindolin-3-ylideneamino)-2-thioxo-2H-1,3-thiazin-6(3H)-one, abbreviated as HOTT in aqueous media of pH 7-10 is described. The electronic spectrum of the produced brown-red colored species showed well defined and sharp peak at λ_max = 466 nm. The effective molar absorptivity for the produced cyano compound was 2.5 × 10⁴ L mol⁻¹ cm⁻¹. Beer's law and Ringbom's plots were obeyed in the concentration range 0.05-2.0 and 0.30-1.5 μg mL⁻¹ cyanide ions, respectively. The proposed method offers 16.0 and 50.3 μg L⁻¹ lower limits of detection (LOD) and quantification (LOQ) of the cyanide ion, respectively. The analytical utility of the method for the analysis of cyanide ions in tap and drinking water samples was demonstrated and the results were compared successfully with the conventional cyanide ion selective electrode. The short time response and the detection by the naked eye make the method available for the detection and quantitative determination of cyanide in a variety of samples e.g. fresh and drinking water. Moreover, the structure of the produced colored species was determined with the aid of spectroscopic measurements (UV-Vis, IR, ¹H and ¹³C NMR) and elemental analysis.     

Synergistic flotation of U(VI)-alizarin complex with some diamines followed by spectrophotometric determination of U(VI) using 4,4′-diaminophenylmethane

In this work, synergistic flotation of U(VI)-alizarin complex at the presence of some diamine compounds was firstly investigated by the spectrophotometric method. The flotation process was carried out on aliquots of 100 ml of U(VI) solutions containing alizarin and the diamine at pH of 5.00 using n-heptane. The floated layer was then dissolved in acetonitrile and its absorbance was measured. Since the synergistic effect of 4,4′-diaminophenylmethane (dapm) was much more than the others, it was used for the determination of U(VI) by this method. Beer's law was obeyed (λ_max = 591 nm) in the range of 5 × 10⁻⁷ to 1 × 10⁻⁵ mol l⁻¹ with the apparent molar absorptivity of 1.12 × 10⁶ l mol⁻¹ cm⁻¹, and a correlation coefficient of 0.9991. The detection limit (n = 7) was 1 × 10⁻⁷ mol l⁻¹, and the R.S.D. (n = 7) obtained for 4 × 10⁻⁶ mol l⁻¹ of U(VI) was 2.23%. Except that only a few analogous cations, which could be masked by EDTA, no interference was observed at the presence of various conventional ions, even at high concentrations. The reliability and applicability of the method were confirmed using some geological standard reference materials and spiked synthetic water samples, respectively.     

Rapid simultaneous analysis of 1-hydroxypyrene, 2-hydroxyfluorene, 9-hydroxyphenanthrene, 1- and 2-naphthol in urine by first derivative synchronous fluorescence spectrometry using Tween-20 as a sensitizer

A novel method of first derivative synchronous fluorescence was developed for the rapid simultaneous analysis of trace 1-hydroxypyrene (1-OHP), 1-naphthol (1-NAP), 2-naphthol (2-NAP), 9-hydroxyphenanthrene (9-OHPe) and 2-hydroxyfluorene (2-OHFlu) in human urine. Only one single scan was needed for quantitative determination of five compounds simultaneously when Δλ = 10 nm was chosen. In the optimal experimental conditions, there was a linear relationship between the fluorescence intensity and the concentration of 1-OHP, 1-NAP, 2-NAP, 9-OHPe and 2-OHFlu in the range of 1.75 × 10⁻⁹ to 4.50 × 10⁻⁶ mol L⁻¹, 3.64 × 10⁻⁸ to 2.20 × 10⁻⁴ mol L⁻¹, 8.18 × 10⁻⁹ to 1.20 × 10⁻⁴ mol L⁻¹, 3.26 × 10⁻⁹ to 8.50 × 10⁻⁵ mol L⁻¹ and 4.88 × 10⁻⁹ to 5.50 × 10⁻⁶ mol L⁻¹, respectively. The limits of detection (LOD) were found to be 5.25 × 10⁻¹⁰ mol L⁻¹ for 1-OHP, 1.10 × 10⁻⁸ mol L⁻¹ for 1-NAP, 2.46 × 10⁻⁹ mol L⁻¹ for 2-NAP, 9.77 × 10⁻¹⁰ mol L⁻¹ for 9-OHPe and 1.46 × 10⁻⁹ mol L⁻¹ for 2-OHFlu. The proposed method is reliable, selective and sensitive, and has been used successfully in the determination of traces of 1-OHP, 1-NAP, 2-NAP, 9-OHPe and 2-OHFlu in human urine samples, whose results were in good agreement with those gained by the HPLC method.     

Quantification of N-acetylcysteine in pharmaceuticals using cobalt phthalocyanine modified graphite electrodes

Flow injection analysis (FIA) with amperometric detection was employed for the quantification of N-acetylcysteine (NAC) in pharmaceutical formulations, utilizing an ordinary pyrolytic graphite (OPG) electrode modified with cobalt phthalocyanine (CoPc). Cyclic voltammetry was used in preliminary studies to establish the best conditions for NAC analysis. In FIA-amperometric experiments the OPG-CoPc electrode exhibited sharp and reproducible current peaks over a wide linear working range (5.0 × 10⁻⁵-1.0 × 10⁻³ mol L⁻¹) in 0.1 mol L⁻¹ NaOH solution. High sensitivity (130 mA mol⁻¹ cm²) and a low detection limit (9.0 × 10⁻⁷ mol L⁻¹) were achieved using the sensor. The repeatability (R.S.D.%) for 13 successive flow injections of a solution containing 5.0 × 10⁻⁴ mol L⁻¹ NAC was 1.1%. The new procedure was applied in analyses of commercial pharmaceutical products and the results were in excellent agreement with those obtained using the official titrimetric method. The proposed amperometric method is highly suitable for quality control analyses of NAC in pharmaceuticals since it is rapid, precise and requires much less work than the recommended titrimetric method.