High-performance liquid chromatography with post-column 2,2′-diphenyl-1-picrylhydrazyl radical scavenging assay: Methodological considerations and application to complex samples

An improved post-column 2,2′-diphenyl-1-picrylhydrazyl (DPPH) radical scavenging assay for the screening of antioxidants in complex matrices was developed. Experimental parameters believed to be influential to DPPH response were studied in a univariate approach. Optimum conditions were found to be: 5 × 10⁻⁵ M DPPH reagent prepared in a 75% methanol: 25% 40 mM citric acid-sodium citrate buffer (pH 6) solution, degassed with nitrogen; reaction coil of 2 m × 0.25 mm i.d. PEEK tubing; detection at 521 nm; analysis at room temperature. The analytical utility of this protocol was evaluated by screening for antioxidants in thyme and green tea, in comparison with two commonly employed methodologies.     

Kinetic deoxyribose degradation assay and its application in assessing the antioxidant activities of phenolic compounds in a Fenton-type reaction system

Pro-oxidant properties of phenolic antioxidants, which are derived from their iron recycling reactivity, render the traditional deoxyribose degradation assay invalid to assess the hydroxyl radical-scavenging activity in Fenton-type reaction systems. In the present paper, we studied in detail the interactions between iron and phenolic compounds, and established a kinetic deoxyribose method by taking advantage of the distinct difference between the completion time of Fenton reaction and that of the iron-reducing process. With the newly established kinetic method, we investigated the effects of phenolics on hydroxyl radical formation in a Fenton-type system and determined successfully the second rate constants of hydroxyl radical-scavenging reactions. The site-specific and non-site-specific hydroxyl radical-scavenging ability suggested that both direct hydroxyl radical-scavenging potency and iron-chelating capacity accounted for their inhibitory effects on deoxyribose oxidation degradation. This method, more simple, time saving, and applicative than the traditional deoxyribose assay, produces as accurate results (RSD<0.05, with dynamic range from 7.5 to 575 μM) as typical methods, such as radiolysis technology, and may be of significance in evaluating and screen the hydroxyl radical-scavenging antioxidants.     

Determination of photoformation rates and scavenging rate constants of hydroxyl radicals in natural waters using an automatic light irradiation and injection system

Photoformation rates and scavenging rate constants of hydroxyl radicals (OH) in natural water samples were determined by an automatic determination system. After addition of benzene as a chemical probe to a water sample in a reaction cell, light irradiation and injection of irradiated water samples into an HPLC as a function of time were performed automatically. Phenol produced by the reaction between OH and the benzene added to the water sample was determined to quantify the OH formation rate. The rate constants of OH formation from the photolysis of nitrate ions, nitrite ions and hydrogen peroxide were comparable with those obtained in previous studies. The percent of expected OH photoformation rate from added nitrate ion were high in drinking water (97.4%) and river water (99.3%). On the other hand, the low percent (65.0%) was observed in seawater due to the reaction of OH with the high concentrations of chloride and bromide ions. For the automatic system, the coefficient of variance for the determination of the OH formation rate was less than 5.0%, which is smaller than that in the previous report. When the complete time sequence of analytical cycle was 40 min for one sample, the detection limit of the photoformation rate and the sample throughput were 8 × 10⁻¹³ M s⁻¹ and 20 samples per day, respectively. The automatic system successfully determined the photoformation rates and scavenging rate constants of OH in commercial drinking water and the major source and sink of OH were identified as nitrate and bicarbonate ions, respectively.     

Optimization of hydroxyl radical formation using TiO2 as photocatalyst by response surface methodology

The determination of the optimum parameters for hydroxyl radicals (OH) formation by a TiO₂ solution has been investigated by measuring the emitted fluorescence after the reaction with terephthalic acid has occurred. After UV irradiation, the terephthalic acid was transformed into 2-hydroxyterephthalic acid whose fluorescence is directly proportional to the generated OH. Optimization of hydroxyl radicals’ formation using TiO₂ as catalyst was carried out by studying the effects of irradiation time, TiO₂ concentration and terephthalic acid concentration on the production of the fluorescent HTA with an experimental design. The aim of our research was to apply response surface methodology as a chemometric method for the optimization of the reaction conditions. The combination of irradiation time, TiO₂ concentration and terephthalic acid concentration was varied at designed points of a central composite rotatable design. The three factors were found to have a significant effect upon the reaction. The optimum conditions for the reaction achievement were estimated to be 10 min for the irradiation time, 25 μg mL⁻¹ TiO₂ concentration and 0.1 mmol L⁻¹ terephthalic acid concentration. Afterwards, using these parameters the method was applied for the determination of the ability of several plant extract samples to scavenge the formed OH.     

Iron-chelating agents never suppress Fenton reaction but participate in quenching spin-trapped radicals

Hydroxyl radical formation by Fenton reaction in the presence of an iron-chelating agent such as EDTA was traced by two different assay methods; an electron spin resonance (ESR) spin-trapping method with 5,5-dimethyl-1-pyrroline N-oxide (DMPO), and high Performance liquid chromatography (HPLC)-fluorescence detection with terephthalic acid (TPA), a fluorescent probe for hydroxyl radicals. From the ESR spin-trapping measurement, it was observed that EDTA seemed to suppress hydroxyl radical formation with the increase of its concentration. On the other hand, hydroxyl radical formation by Fenton reaction was not affected by EDTA monitored by HPLC assay. Similar inconsistent effects of other iron-chelating agents such as nitrylotriacetic acid (NTA), diethylenetriamine penta acetic acid (DTPA), oxalate and citrate were also observed. On the addition of EDTA solution to the reaction mixture 10 min after the Fenton reaction started, when hydroxyl radical formation should have almost ceased but the ESR signal of DMPO-OH radicals could be detected, it was observed that the DMPO-OH signal disappeared rapidly. With the simultaneous addition of Fe(II) solution and EDTA after the Fenton reaction ceased, the DMPO-OH signal disappeared more rapidly. The results indicated that these chelating agents should enhance the quenching of [DMPO-OH] radicals by Fe(II), but they did not suppress Fenton reaction by forming chelates with iron ions.     

A simple and sensitive resonance scattering spectral method for determination of hydroxyl radical in Fenton system using rhodamine S and its application to screening the antioxidant

Based on resonance scattering (RS) effect of rhodamine dye association particles, a new resonance scattering method for the determination of hydroxyl free radical from Fenton reaction was developed. In HCl-NaAc buffer solution, the OH of Fenton reaction oxidized the excess I⁻ to I₃⁻. The I₃⁻ combined, respectively, with rhodamine B (RhB), butyl rhodamine B (b-RhB), rhodamine 6G (RhG) and rhodamine S (RhS) to form association particles that exhibit stronger resonance scattering effect at 420 nm and 610 nm. However, the RS peak at about 610 nm was interfered with its synchronous fluorescence peak at 580 nm for RhB, 580 nm for b-RhB, 560 nm for RhG and 560 nm for RhS, respectively. The concentration of H₂O₂ in the range of 0.648-21.6 μmol/L, 0.423-13.0 μmol/L, 0.216-13.0 μmol/L and 0.092-13.0 μmol/L was linear to its resonance scattering intensity at 420 nm. Its detection limit was 0.15 μmol/L, 0.10 μmol/L, 0.092 μmol/L and 0.044 μmol/L, H₂O₂, respectively. This RhS RS method was applied to selection of the antioxidant, with satisfactory results.     

A novel detection approach based on chromophore-decolorizing with free radical and application to photometric determination of copper with acid chrome dark blue

A novel detection approach named chromophore-decolorizing with free radicals is developed for determination of trace heavy metal. The hydroxyl radicals (HO) generated from Fe(III) and hydrogen peroxide will oxidize the free chromophore into almost colorless products. The copper-acid chrome dark blue (ACDB) complexation was investigated at pH 5.07. In the presence of Fe(III) and hydrogen peroxide, the excess ACDB was decolorized in the Cu-ACDB reaction solution, and the final solution contained only one color compound, the Cu-ACDB complex. After oxidation of free hydroxyl radicals, the complexation becomes sensitive and selective and it has been used for the quantitation of trace amounts of Cu(II) dissolved in natural water. Beer's law is obeyed in the range from 0 to 0.500 μg mL⁻¹ Cu(II) and the limit of detection is only 6 μg L⁻¹ Cu(II). Besides, the Cu-ACDB complex formed was characterized.     

The antioxidant activity of wines determined by the ABTS(+) method: influence of sample dilution and time

The free radical scavenging activity of 42 Spanish commercial wines was determined using the 2,2′-azinobis(3-ethylbenzothiazoline-6-sulfonic acid) radical cation (ABTS⁺). The ABTS⁺ radical was generated enzymatically using a horseradish peroxidase and hydrogen peroxide. The presence of wine phenolic compounds caused the absorbance of the radical to decay at 414 nm. The measurement conditions were optimised. The total phenolic content of wines ranged from 1262 to 2389 mg l⁻¹ for red wines and 70 to 407 mg l⁻¹ for white wines, expressed as gallic acid equivalents. The phenolic content of Sherry wines was similar to that of white wines. Optimum dilutions for white and Sherry wines were set up as a function of their total phenolic content (for total phenol index, TPI<300 mg gallic acid per liter, dilution 2.5:10 to 5:10; for TPI>300 mg gallic acid per liter, dilution 1:10 to 3:10). Red wines absorb at the wavelength of measurement and dilutions between 0.35:10 and 0.1:10 are advisable. Reaction kinetics were also monitored and the antioxidant activity, expressed as Trolox Equivalent Antioxidant Capacity (TEAC), was determined at 2 and 15 min of reaction. The mean values for TEAC_2 min were 5.01±1.40 mM for red wines, 0.46±0.32 mM for white wines and 0.26±0.19 mM for Sherry wines. At 15 min, mean values were 6.93±2.41 mM for red wines, 0.67±0.47 mM for white wines and 0.26±0.19 mM for Sherry wines. The correlation coefficients were better at 2 min (r=0.9012) than at 15 min (r=0.8462) when compared with TPI. Hence, TEAC_2 min seems to be a more appropriate measure.     

Radical scavenging ability of polyphenolic compounds towards DPPH free radical

Free radical scavenging activity of different polyphenolic compounds commonly present in wine has been evaluated using DPPH method. The experiments were performed with different amounts of phenols within the linear interval of response and with an excess of DPPH in all cases. In these conditions, for most of the compounds tested, the reaction was biphasic. Total stoichiometry values n confirm the implication of more than one step in the process. Flavan-3-ol compounds showed the highest values, especially procyanidins B1 (9.8) and B2 (9.1). In this family, n values coincide with the number of hydroxyl groups available. EC₅₀ and TEC₅₀ parameters have been calculated. EC₅₀ values are extremely diverse, being the procyanidins B1 and B2 the most potent scavenging compounds and resveratrol the less one. TEC₅₀ considers the rate of reaction towards the free radical. (+)-Catechin and (−)-epicatechin are the phenolic compounds that need more time to react. In contrast, caftaric and caffeic acids are the phenolic acids that react more rapidly. Antioxidant efficacy (AE) is a parameter that combines both factors. Compounds as kaempferol, with a high EC₅₀ value, could be considered as an antioxidant with low relevance, but instead shows the highest AE value of the phenolic compounds tested, due to its fast rate of reaction, what is of great biological importance.     

Salvia officinalis L. essential oils: effect of hydrodistillation time on the chemical composition, antioxidant and antimicrobial activities

Salvia officinalis L. oils were isolated from the plant's commercial dried aerial parts, by hydrodistillation, with different distillation times. The essential oils were analysed by gas chromatography and gas chromatography-mass spectrometry. The antioxidant ability was measured using a free radical scavenging activity assay using 2,2-diphenyl-1-picrylhydrazyl (DPPH), a thiobarbituric acid reactive substances (TBARS) assay, a deoxyribose assay for the scavenging of hydroxyl radical, an assay for site-specific actions and a 5-lipoxygenase assay. Antibacterial activity was determined by the agar diffusion method. 1,8-Cineole, α-pinene and camphor were the dominant components of all the essential oils. The different hydrodistillation times did not affect the oil yield nor the relative amount of the oil components. The time of hydrodistillation influenced the antioxidant activity. With the DPPH method, the oils isolated for 2 and 3 h were stronger free radical scavengers, while with the TBARS method, the highest antioxidant values were obtained in the oils isolated for 30 min, 2 and 3 h. Hydroxyl radical scavenging and lipoxygenase activity assays showed the best results with oils isolated for 1 and 3 h. With the deoxyribose method, sage oils at concentrations <1000 mg L(-1) showed better activity than mannitol. The essential oil of S. officinalis showed very weak antimicrobial activity.     

Effect of nanoclay and macroinitiator on the kinetics of atom transfer radical homo- and copolymerization of styrene and methyl methacrylate initiated with CCl3-terminated poly (vinyl acetate) macroinitiator

Effect of nanoclay on the kinetics of atom transfer radical bulk homo- and copolymerization of styrene (St) and methyl methacrylate (MMA) initiated with CCl₃-terminated poly (vinyl acetate) macroinitiator at 90 °C was investigated. CuCl/PMDETA was used as a catalyst system. Results showed that nanoclay significantly enhances the homopolymerization rate of MMA. It was attributed to the activated conjugated CC bond of MMA monomer via interaction between the carbonyl group of MMA monomer and the hydroxyl moiety (AlOH) of nanoclay as well as to the effect of nanoclay on the dynamic equilibrium between the active (macro)radicals and dormant species. Homopolymerization rate of St (a noncoordinative monomer with nanoclay) decreased slightly in the presence of nanoclay. It could be explained by inserting of a portion of macroinitiator into the clay galleries, where no sufficient St monomer exists due to the low compatibility or interaction of St monomer with nanoclay to react with the macroinitiator. Controlled/living characteristic of all the reactions were confirmed by GPC results. More reliable reactivity ratios of the St and MMA in the presence of nanoclay were calculated by using the cumulative average copolymer composition at the moderate to high conversion to be r_St = 0.290 ± 0.082, r_MMA = 0.443 ± 0.093 (extended Kelen-Tudos method) and r_St = 0.293 ± 0.071, r_MMA = 0.447 ± 0.080 (Mao-Huglin method). Results indicated that the rate of incorporation of MMA comonomer into the copolymer increases in the presence of nanoclay, verifying the existence of interaction between the carbonyl group of MMA comonomer and the hydroxyl moiety of nanoclay. It was found that in the presence of nanoclay, tendency of the random copolymerization of St and MMA toward an alternating copolymerization increases.     

Determination of the hydroxyl radical by its adduct formation with phenol and liquid chromatography/electrochemical detection

An HPLC-ECD method is described for the indirect determination of the hydroxyl (OH) radical. Fenton's reaction is used to produce OH, which simultaneously attacks phenols (phenol or pyrocatechol) to form the adducts, pyrocatechol or pyrogallic acid. Thus, [OH] quantification is based on the separation and detection of pyrogallic acid and/or pyrocatechol by an isocratic HPLC-ECD method. The quantification of OH is also performed alternatively by a chronoamperometric detection in an electrochemical cell, where simultaneously formed Fe^III (Fenton's reaction) combines [Fe^II(CN)₆]⁴⁻ to produce the Prussian blue (PB) molecules (Fe₄^III[Fe^II(CN)₆]₃). Newly formed PB molecules are then immediately converted to colorless Everitts salt (K₄Fe₄^II[Fe^II(CN)₆]₃) with the reduction of the high-spin Fe^III to Fe^II at the surface of a glassy carbon electrode at +0.150 V (versus Ag/AgCl). The calculated concentration of OH during incubation (0.626 ppm) can be detected with negative errors by the HPLC-ECD (0.595 and 0.615 ppm with the errors −5.2 and −1.8%, respectively) and by the chronoamperometric method (0.552 and 0.607 ppm with the errors −11.8 and −3.0%, respectively). For the comparison of the two sets of data, HPLC-ECD method is much more promising.     

Determination of hydroxyl radical by capillary electrophoresis and studies on hydroxyl radical scavenging activities of Chinese herbs

High-performance capillary electrophoresis (CE) with electrochemical detection (ED) was employed to determine hydroxyl radicals in the Fenton reaction. Hydroxyl radicals can react with salicylic acid to produce 2,3-dihydroxy benzoic acid and 2,5-dihydroxy benzoic acid, which can be analyzed by CE-ED. Based on this principle, hydroxyl radicals were determined indirectly. In a 20 mmol/L phosphate running buffer (pH 7.4), 2,3-dihydroxy benzoic acid and 2,5-dihydroxy benzoic acid would elute simultaneously from the capillary within 6 min. As the working electrode, a 300 m diameter carbon-disk electrode exhibits good responses at +0.60 V (vs. SCE) for the two analytes. Peak currents of the two analytes are additive. Excellent linearity was obtained in the concentration range from 1.0×10^-3 mol/L to 5.0×10^-6 mol/L for 2,3-dihydroxy benzoic acid. The detection limit (S/N=3) was 2.0×10^-6 mol/L. This method was successfully applied for studying hydroxyl radical scavenging activities of Chinese herbs. It is testified that Apocynum Venetum L., Jinkgo bibola L., Morus alba L. and Rhododendron dauricum L. have strong hydroxyl radical scavenging activities.     

Methodological aspects about in vitro evaluation of antioxidant properties

Several of the most commonly used methods for in vitro determination of antioxidant capacity are reviewed in the present paper. The chemical principles of methods based either on biological oxidants (peroxyl radical, superoxide radical anion, hydrogen peroxide, hydroxyl radical, hypochlorous acid, singlet oxygen, nitric oxide radical, and peroxynitrite) or on non-biological assays (scavenging of 2,2′-azinobis-(3-ethylbenzothiazoline-6-sulphonate) radical cation (TEAC assay), scavenging of 2,2-diphenyl-1-picrylhydrazyl radical (DPPH assay), ferric reducing antioxidant power (FRAP assay), Folin-Ciocalteu reducing capacity (FC assay), electrochemical total reducing capacity) are outlined and critically discussed. The scope of application, the advantages and shortcomings of each method are also highlighted.     

Preparation and characterization of sponge-like composites by cross-linking hyaluronic acid and carboxymethylcellulose sodium with adipic dihydrazide

The objective of this study was to develop a novel kind of hyaluronic acid-based biomaterials which had the great potentials to be used as dermal fillers or applied in tissue augmentation or filling. A series of sponge-like composites were prepared by cross-linking different amounts of hyaluronic acid (HA) and carboxymethylcellulose sodium (CMC-Na). Adipic dihydrazide (ADH) was employed as the cross-linker and water-soluble 1-ethyl-3-[3-(dimethylaminopropyl)] carbodiimide (EDC) as the carboxyl-activating agent. Fourier-Transform Infrared (FT-IR) analysis was performed to characterize the expected amide linkages in the cross-linked composites, and the scanning electron microscopic (SEM) analysis was carried out to view the microstructures of the composites. Furthermore, the physico-chemical properties, such as swelling property, thermostability, the resistance to hyaluronidase (HAse) degradation and the antioxidant abilities against hydroxyl free radical (OH), were characterized. The presence of the amide peak at 1476.11 cm⁻¹ in FT-IR spectra indicated the cross-linking between HA and CMC-Na by ADH. As demonstrated by scanning electron microscopy (SEM), the microstructures of the composites were dependent on HA content. The equilibrium swelling ratio was 20.091 ± 0.070, indicating the excellent water-uptake abilities of the composites. The HA-CMCNa composites showed a thermal stability up to 237 °C, independent of the composition of the prepared biomaterials. When exposed to phosphate-buffered saline (PBS) solution containing HAse (100 U/ml), all of the composites could be degraded quickly in 15 h. But when the concentrations of ADH and EDC in the cross-linking reaction system were increased up to 10 mmol/L, respectively, the degradation process lasted for 60 h. The prepared composites possessed great antioxidant abilities against OH and the ability to scavenge OH depended on the composition. With the high water-keeping ability and improved physico-chemical stabilities, the prepared biocompatible HA-CMCNa composites could be used as ideal alternatives for dermal fillers, tissue augmentation/filling biomaterials.     

Sequential injection analysis with electrochemical detection as a tool for economic and rapid evaluation of total antioxidant capacity

This work presents a new flow-based coupled electrochemical technique for evaluation of “total antioxidant capacity (TAC)”. A sequential injection (SI) with amperometric detection was applied to the TAC analysis of commercial instant ginger infusion beverages using 2,2′-azino-bis(3-ethylbenzothiazoline-6-sulfonic acid) (ABTS) assay. Besides having chromogenic properties, the ABTS reagent behaves as an electroactive species at the glassy carbon electrode in phosphate buffer pH 7.0, the decrease of the cathodic current signal of the ABTS⁺ radical after reaction with antioxidants can be monitored. The SI system, furnished with an in-house electrochemical detection cell (ECD), was optimized with respect to the applied potential, sample and reagent volume, and flow rate to the detector. Gallic acid was used as the standard antioxidant and the capacity was reported as gallic acid equivalent (GAE) unit. TAC measurements of ginger infusions at the optimum condition were performed using the proposed technique and also with the classical batch spectrophotometric ABTS assay. TAC values obtained from our method and the standard method are in good agreement (r² = 0.956). The SI-amperometric technique provided satisfactory precision (4.11% RSD) with rapid sample throughput (40 samples h⁻¹). Also using this method, the consumption of the expensive ABTS reagent was greatly reduced.     

Kinetic behavior of the reaction between hydroxyl radical and the SV40 minichromosome

Aqueous solutions containing the minichromosomal form of the virus SV40 and the radical scavenger DMSO were subjected to γ-irradiation, and the resulting formation of single-strand breaks (SSB) was quantified. Under the irradiation conditions, most SSBs were produced as a consequence of hydroxyl radical (OH) reactions. By controlling the competition between DMSO and the viral DNA substrate for OH, we are able to estimate the rate coefficient for the reaction of OH with the SV40 minichromosome. The results cannot be described adequately by homogeneous competition kinetics, but it is possible to describe the rate coefficient for the reaction as a function of the scavenging capacity of the solution. The experimentally determined rate coefficient lies in the range 1×10⁹–2×10⁹ L mol⁻¹ s⁻¹ at 10⁷ s⁻¹, and increases with increasing scavenging capacity.