Study on the interaction between polyelectrolytes and oppositely charged ionic surfactants. Solubilized state of the complexes in the postprecipitation region

The effects of polymer charge and surfactant composition were examined on the complex-precipitation (CP) and phase-separation (PS) regions for cationic cellulose (CC), sodium poly(oxyethylene laurylsulfate) and lauroylamidopropyl-N,N-dimethylammonioacetate and Na₂SO₄. The solubilized state of the complexes was studied by light scattering in the one-phase, 1φ, solution in the postprecipitation region. The cationic charge on the CC and the anionic charge on the surfactant greatly affected the CP and PS regions, to change the domain of the 1φ solution. The relative scattering intensity of the complex, ΔI _complex , was high near the CP region and decreased with increasing surfactant and salt concentrations in the 1φ solution. The presence of solubilized complexes of polymers cross-linked with surfactant micelles was suggested near the CP region. The cross-linking of the complexes decreased with increasing surfactant and salt concentrations, producing increased micelle binding and charge shielding. The shrinkage of the complexes was considered to bring about the boundary on which ΔI _complex is equal to the relative scattering intensity of polymer alone in the 1φ solutions. Separation of the complexes and the transition of the solution into the PS region were suggested at high concentrations over the boundary. Received: 30 September 2000 Accepted: 7 May 2001     

Adsorption of charged macromolecules on oppositely charged porous column materials

A family of cationic polyelectrolytes possessing defined chain lengths, narrow chain length distributions, uniform charge density, but substituents of different hydrophilicity at the quaternary ammonium group served as model compounds for adsorption studies. These studies quantitatively revealed that polymer characteristics and electrostatic parameters affect the adsorption behavior on oppositely charged porous column materials. The presence of electrostatic exclusion, in addition to size exclusion, was proved comparing molecular, electrostatic and geometrical parameters. The dominance of electrostatic effects could be concluded evaluating the relation between molecular and electrostatic dimensions. The results provide a contribution how to estimate the threshold for electrostatic exclusion from pores as a function of dimensions and experimental conditions.     

Liquid crystalline complexes of an azo-containing surfactomesogen with oppositely charged polyelectrolytes

A triethyl-ammonium functionalized 4-nitro-4′-alkoxy azobenzene mesogen with a 10-carbon spacer (azo10Q, a ‘surfactomesogen’) was complexed in equimolar proportions to a variety of oppositely charged polyelectrolytes, and studied by differential scanning calorimetry (DSC), polarizing optical microscopy, and X-ray diffraction. The complexation generates a single-layer smectic A mesophase over a very wide temperature range from a surfactomesogen that, alone, melts directly to the isotropic phase. The clearing temperatures, ranging from 130 to 190 °C and generally higher than the melting point of azo10Q, are dependent on the nature of the polyelectrolyte as well as its molecular weight. In contrast, a prominent glass transition near ambient temperature appears to be independent of molecular weight, but varies somewhat with the type of polyelectrolyte. A second T_g-like transition of much lower intensity is detectable at higher temperatures (generally above 100 °C), and, with literature support, is tentatively attributed to nanophase separation involving sublayer planes in the lamellar packing structure. A series of nonequimolar complexes was also investigated, and it was found that, with decreasing azo10Q content, the clearing temperature viewed by DSC decreases rapidly in intensity (and somewhat in temperature) and then disappears although birefringence remains, whereas the lower glass transition increases rapidly in temperature to finally merge with the upper one. © 2005 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 43: 3421–3431, 2005     

Synthesis and interfacial properties of novel cationic polyelectrolytes with brush-on-brush structure of poly(ethylene oxide) side chains

Novel cationic polyelectrolytes with a brush-on-brush structure of poly(ethylene oxide) (PEO) side chains and a charge-containing polyacrylate backbone were synthesized. The PEO side chains were not directly attached to the backbone but via polymethacrylate spacers, thus locating the PEO chains a distance away from the charged units of the backbone. The cationic brush-on-brush polyelectrolytes with high density of PEO chains showed a strong affinity to silica surfaces, provided the backbone charge density was high enough. The adsorption of these polymers was studied by QCM-D giving very high sensed mass, 20 mg/m². It was shown by direct force measurements that protective surface layers were formed by the novel polyelectrolytes, generating strongly repulsive steric forces, which provided an effective barrier against flocculation. The adsorbed layer was sufficiently robust to withstand sliding experiments under a pressure of up to 35 MPa. The friction force in water was very low, and the lubrication was characterized by a friction coefficient in the range of 0.02-0.06.     

Interaction of polyelectrolytes with oppositely charged micelles studied by fluorescence and liquid chromatography

It is studied by spectrofluorimetry the association of ionized cationic micelles (cetyltrimethylammonium bromide, CTAB) with oppositely charged polyelectrolyte [sodium poly(styrenesulfonate), PSSNa]. CTAB provokes a change in the fluorescence intensity emitted by PSSNa. The investigated surfactants form micelle-like aggregates before critical micellar concentration (CMC). Two approaches (binding and partition equilibrium) are used to obtain the association constant, K_A, number of CTAB molecules in a binding site, N, and apparent partition coefficient, Γ. Analysis of the parameters as a function of polymer concentration and ionic strength μ is performed. The effect of μ shows an enhancement in association as μ decreases. Furthermore as CMC decreases with μ, experiments have to be performed at rather different CMCs. This causes K_A and Γ to increase with μ. The adsorption of polyelectrolyte on the micelle is also studied at the greatest μ using high-performance liquid chromatography (size-exclusion) for the first time, obtaining results similar to those found using spectrofluorimetry.     

Supramolecular systems based on cationic surfactants: an influence of hydrotropic salts and oppositely charged polyelectrolytes

Russian Chemical Bulletin - For cationic surfactant 4-aza-1-dodecyl-1-azoniabicyclo[2.2.2]octane bromide (DABCO-16), a significant decrease in the critical micelle concentration (CMC) is shown in...     

A novel biosensing interfacial design produced by assembling nano-Au particles on amine-terminated plasma-polymerized films

A novel biosensing interfacial design strategy has, for the first time, been produced by assembling nano-Au particles on amine-terminated plasma-polymerized films (PPF). A quartz-crystal microbalance (QCM) as a model transducer was deposited with PPF of n-butylamine by use of a glow discharge and then treated with nano-Au particles. The kinetic assembly process and conditions were studied using the real-time-output device and the surface topology of the resulting crystal was characterized by atomic force microscopy (AFM) imaging. Based on analysis of the experimental data, including the association constant of Au–amine interaction, the assembly mechanism is considered to be partly or even mainly chemical adsorption. Moreover, immobilization of anti-human IgM antibody (IgM Ab), as an example, on the developed PPF-Au interface was investigated. It was found that antibody molecules immobilized by the proposed procedure had higher immunological activity than those immobilized by the conventional glutaraldehyde (GLU) cross-linking procedure or the direct gold-attachment procedure. The newly developed sensor had a better response, with a detection limit of IgM concentration as low as ~1.00 g mL^–1. In particular, the extremely high stability of both PPF and nano-Au monolayer formulated allows the designed biosensing interface to withstand harsh regeneration treatment, making it reusable.     

Novel method for the estimation of the binding isotherms of ionic surfactants on oppositely charged polyelectrolytes

One of the most important characteristics of the polyelectrolyte/surfactant interaction is the binding isotherm of the surfactant because it provides basic thermodynamic information about the binding mechanism. However, the amount of the surfactant bound to the polymer may crucially affect the surface properties of these systems via changing the thermodynamic activity of the components. Therefore, a knowledge of the binding isotherms can also be useful in tuning the efficiency of commercial products. However, the determination of these isotherms is still subject to significant experimental difficulties. In this letter, we offer a novel method for the estimation of binding isotherms based on electrokinetic measurements. The technique provides a simple and quick way to estimate the bound amount of surfactant that might be useful in both fundamental and industrial research. In principle, the proposed method could also be extended to the determination of the binding isotherms of small ligands on biomacromolecules.     

Coatings based on mucin‐tannic acid assembled multilayers. Influence of pH

Although widely used as implantable materials due to their mechanical properties, metal devices show several disadvantages, such as the lack of cellular binding sites, antibacterial properties, or lubricant properties. To this end, the development of engineered surfaces through protein coatings has been largely investigated. Due to their natural origin and complex structure which allows the formation of hydrogels, mucins have been proposed and investigated as effective coatings for metallic implants. The present study evaluates the ability of porcine gastric mucin (PGM) to form stable coatings on a model metal surface, using three buffers with different pH values, ranging from acid to alkaline, as dispersion media. Considering its large number of hydroxyl groups and its ability to form hydrogen bonds with the protein, tannic acid (TA) was used as cross‐linker. In addition to coatings' thickness and elasticity assessed through Quartz Crystal Microbalance with Dissipation monitoring (QCM‐D), the study also evaluates the interactions between PGM and TA at various pH values of the dispersion media through DLS. The corroborated results show that the neutral pH allows the best interactions between PGM and TA leading to the formation of a stable, less elastic coating when compared with that obtained using as dispersion media the other two investigated buffers. Moreover, the hydrophilicity and mechanical properties of the dried coatings were assessed through contact angle measurements and nanoindentation, respectively.     

A model for the Gibbs energy of aqueous solutions of polyelectrolytes

A new model for the excess Gibbs energy of aqueous solutions of polyelectrolytes is presented and applied for the correlation of the activity of water in aqueous solutions of polyelectrolytes without as well as with an added (single) salt. The model considers the phenomenon of counterion condensation, i.e., the partial dissociation of highly charged polyelectrolytes in water. Three parameters (a binary interaction parameter between polymer segments, the equilibrium constant of the dissociation reaction and a parameter which accounts for the polymer configuration) were fitted to the experimental results. The model allows for a reliable correlation of experimental results for the osmotic coefficient of aqueous solutions of a single polyelectrolyte (without as well as with an added salt).     

Thermosensitive polyion complex micelles prepared by self-assembly of two oppositely charged diblock copolymers

Polyion complex (PIC) micelles were spontaneously formed in aqueous solutions through electrostatic interaction between two oppositely charged block copolymers, poly(N-isopropylacrylamide)-b-poly(L-glutamic acid) and poly(N-isopropylacrylamide)-b-poly(L-lysine). Their controlled synthesis was achieved via the ring opening polymerization of N-carboxyanhydrides (NCA), ε-benzyloxycarbonyl-L-lysine (Lys(Z)-NCA) or γ-benzyl-L-glutamate (BLG-NCA) with amino-terminated poly(N-isopropylacrylamide) macroinitiator and the subsequent deprotection reaction. The formation of PIC micelles was confirmed by dynamic light scattering and transmission electron microscopy. Turbidimetric characterization suggested that the formed PIC micelles had a concentration-dependent thermosensitivity and their phase transition behaviors could be easily adjusted either by the block length of coplymers or the concentration of micelles.     

Numerical study of the interplay of monomer-surface electrostatic and non-electrostatic interactions in the adsorption of weak polyelectrolytes on oppositely charged surfaces

The adsorption of weak polybase on oppositely charged planar surfaces has been investigated numerically by using the self-consistent field theory (SCFT). Particular attention was paid to the interplay of monomer-surface electrostatic and non-electrostatic interactions in the adsorption behaviors of weak polybase. In this study, the strength of monomer-surface non-electrostatic interactions was set to be no more than the thermal energy k _B T. It was found from the numerical study that in the regime of low surface charge density of the substrate and low pH or high bulk degree of ionization, both the screening-enhanced and screening-reduced salt effects emerge. On the contrary, in the opposite regime, only the screening-reduced salt effect was observed. Moreover, the overall charge neutrality inside the adsorption layer was analyzed. The underlying mechanism governing the adsorption behaviors of weak polybase on oppositely charged surfaces was elucidated.     

Molecular biosensing system based on intrinsically disordered proteins

Intrinsically disordered proteins (IDPs) that undergo structural transition upon binding their target molecules are becoming increasingly known. IDPs, because of their binding specificity and induced folding properties, can serve as biological recognition elements for sensing applications. In this paper, BRCA1, an IDP, was utilized as the biological recognition element to detect tumor suppressor protein p53 through the BRCA1/p53 binding interaction to serve as a proof-of-concept for the use of IDPs as recognition elements. The binding resulted in a disordered-to-ordered BRCA1 conformational change, as seen in our circular dichroism (CD) measurements. This conformational change in BRCA1 (residues 219-498) was utilized in the detection of p53 (residues 311-393) via both intrinsic and extrinsic fluorescent probes. Intrinsic tryptophan residues within the BRCA1 sequence detected p53 (311-393) with a detection limit of 0.559 nM (0.112 pmol). Two environmentally sensitive fluorophores, tetramethylrhodamine-5-maleimide (TMR) and 6-((5-dimethylaminonaphthalene-1-sulfonyl)amino)hexanoic acid, succinimidyl ester (dansyl-X, SE) were conjugated to BRCA1 (219-498). Dansyl-X, SE-conjugated BRCA1 (219-498) detected p53 (311-393) with a detection limit of 1.50 nM (0.300 pmol). The sensitivities for TMR and dansyl-X, SE-conjugated BRCA1 for the detection of p53 were nearly threefold and twofold higher, respectively, than the sensitivity reported using intrinsic BRCA1 tryptophan fluorescence. CD measurements did not reveal a disruption of p53/dye-conjugated BRCA1 binding, thus validating the applicability of environmentally sensitive fluorophores as transduction moieties to detect molecules which bind to IDPs and induce a structural change.     

Effect of surface cationization on the conformal deposition of polyelectrolytes over cotton fibers

The effect of surface cationization on the conformal deposition of alternating nanolayers of poly(sodium styrene sulfonate) (PSS) [Kleinfeld E, Ferguson G (1996) Chem Mater 8:1575–1578] and poly(allylamine hydrochloride) (PAH) over cotton fibers is reported. Three different levels of cotton cationization were evaluated. Variations in the cationization degree were achieved by manipulating the ratio of 3-chloro-2-hydroxy propyl trimethyl ammonium to NaOH. Experimental results obtained via Carbon–Hydrogen–Nitrogen–Sulfur (CHNS) elemental analysis and X-ray Photoelectron Spectroscopy (XPS) indicated that the deposition process was not significantly influenced by the degree of cotton cationization. The build up of further polyelectrolyte layers was found to be less sensitive to variations in the cationic character of the substrates once a critical number of alternating layers was deposited.     

Influence of the degree of ionization and molecular mass of weak polyelectrolytes on charging and stability behavior of oppositely charged colloidal particles

Positively charged amidine latex particles are studied in the presence of poly(acrylic acid) (PAA) with different molecular masses under neutral and acidic conditions by electrophoresis and time-resolved dynamic light scattering. Under neutral conditions, where PAA is highly charged, the system is governed by the charge reversal induced by the quantitatively adsorbing polyelectrolyte and attractive patch-charge interactions. Under acidic conditions, where PAA is more weakly charged, the following two effects come into play. First, the lateral structure of the adsorbed layers becomes more homogeneous, which weakens the attractive patch-charge interactions. Second, polyelectrolyte adsorption is no longer quantitative and partitioning into the solution phase is observed, especially for PAA of low molecular mass.     

A novel immunoassay based on the dissociation of immunocomplex and fluorescence quenching by gold nanoparticles

This study reports a novel, simple and sensitive immunoassay using fluorescence quenching caused by gold nanoparticles coated with antibody. The method is based on a non-competitive heterogeneous immunoassay of human IgG conducted by the typical procedure of sandwich immunocomplex formation. Goat anti-human IgG was first adsorbed on polystyrene microwells, and human IgG analyte was captured by the primary antibody and then sandwiched by antibody labeled with gold nanoparticles. The sandwich-type immunocomplex was subsequently dissociated by the mixed solution of sodium hydroxide and trisodium citrate, the solution obtained, which contains gold nanoparticles coated with antibody, was used to quench fluorescence. The fluorescence intensity of fluorescein at 517 nm was inversely proportional to the logarithm of the concentration of human IgG in the dynamic range of 10-5000 ng mL⁻¹ with a detection limit of 4.7 ng mL⁻¹. The electrochemical experiments and the UV-vis measurements were applied to demonstrate whether the immunoglod was dissociated completely and whether the gold nanoparticles aggregated after being dissociated, respectively. The proposed system can be extended to detect target molecules such as other kinds of antigen and DNA strands, and has broad potential applications in disease diagnosis.     

Mixed micelles of oppositely charged poly(N‐isopropylacrylamide) diblock copolymers

Mixed micelle formation between two oppositely charged diblock copolymers that have a common thermosensitive nonionic block of poly(N‐isopropylacrylamide) (PNIPAAM) has been studied. The block copolymer mixed solutions were investigated under equimolar charge conditions as a function of both temperature and total polymer concentrations by turbidimetry, differential scanning calorimetry, two‐dimensional proton nuclear magnetic nuclear Overhauser effect spectroscopy (2D ¹H NMR NOESY), dynamic light scattering, and small angle X‐ray scattering measurements. Well‐defined and electroneutral cylindrical micelles were formed with a radius and a length of about 3 nm and 35 nm, respectively. In the micelles, the charged blocks built up a core, which was surrounded by a corona of PNIPAAM chains. The 2D ¹H NMR NOESY experiments showed that a minor block mixing occurred between the core blocks and the PNIPAAM blocks. By approaching the lower critical solution temperature of PNIPAAM, the PNIPAAM chains collapsed, which induced aggregation of the micelles. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2017 , 55, 1457–1469     

A unified analytical treatment of the acid-dissociation equilibria of weakly acidic linear polyelectrolytes and the conjugate acids of weakly basic linear polyelectrolytes

 The influence of added sodium chloride concentration levels on the acid-dissociation equilibria of a weakly acidic linear polyelectrolyte and a conjugate acid of weakly basic linear polyelectrolyte has been investigated potentiometrically by use of polyacrylic acid (PAA) and poly(N-vinylimidazole) (PVIm) as examples of polyelectrolytes. Both equilibria are strongly influenced by the degree of dissociation of the polyacids as well as the concentration levels of sodium chloride due to an electrostatic effect originating from the negatively or positively charged polymer surfaces. These have been analyzed in a unified manner by taking accounts of two-phase properties of the charged linear polyions. Distribution of counterions and coions between a polyelectrolyte phase formed around the polymer skeleton and a bulk solution phase has been rationalized by a Donnan’s relation. Introduction of a volume term for the polyelectrolyte phase permits definition of averaged concentrations of mobile ions in the vicinity of the polyion molecules, which enables us to define hypothetical intrinsic acid-dissociation constants in the polyion domain. The intrinsic constants estimated by extrapolation of apparent acid-dissociation constants at zero-charge state are in good agreement with the acid-dissociation constants of the monomer analogs of the polymers, i.e., acetic acid for PAA and imidazole for PVIm, respectively. The difference between the apparent and intrinsic acid-dissociation constants for PVIm was much higher than that for PAA at defined degree of dissociation of the polyacids, even though the separations of the functionalities fixed on the linear polymers are approximately equal to each other. Received: 4 February 1997 Accepted: 26 May 1997     

A novel amperometric biosensor based on NiO hollow nanospheres for biosensing glucose

NiO hollow nanospheres were synthesized by controlled precipitation of metal ions with urea using carbon microspheres as templates, which were for the first time adopted to construct a novel amperometric glucose biosensor. Glucose oxidase was immobilized on the surface of hollow nanospheres through chitosan-assisted cross-linking technique. Due to the high specific active sites and high electrocatalytic activity of NiO hollow nanospheres, the constructed glucose biosensors exhibited a high sensitivity of 3.43 μA/mM. The low detection limit was estimated to be 47 μM (S/N = 3), and the Michaelis-Menten constant was found to be 7.76 mM, indicating the high affinity of enzyme on NiO hollow nanospheres to glucose. These results show that the NiO hollow nanospheres are a promising material to construct enzyme biosensors.     

New biosensing platforms based on the layer-by-layer self-assembling of polyelectrolytes on Nafion/carbon nanotubes-coated glassy carbon electrodes

We are proposing for the first time the use of a Nafion/multi-walled carbon nanotubes dispersion deposited on glassy carbon electrodes (GCE) as a new platform for developing enzymatic biosensors based on the self-assembling of a chitosan derivative and different oxidases. The electrodes are obtained by deposition of a layer of Nafion/multi-wall carbon nanotubes dispersion on glassy carbon electrodes, followed by the adsorption of a chitosan derivative as polycation and glucose oxidase, l-aminoacid oxidase or polyphenol oxidase, as polyanions and biorecognition elements. The optimum configuration for glucose biosensors has allowed a highly sensitive (sensitivity = (0.28 ± 0.02) μA mM⁻¹, r = 0.997), fast (4 s in reaching the maximum response), and highly selective (0% interference of ascorbic acid and uric acid at maximum physiological levels) glucose quantification at 0.700 V with detection and quantification limits of 0.035 and 0.107 mM, respectively. The repetitivity for 10 measurements was 5.5%, while the reproducibility was 8.4% for eight electrodes. The potentiality of the new platform was clearly demonstrated by using the carbon nanotubes/Nafion layer as a platform for the self-assembling of l-aminoacid oxidase and polyphenol oxidase. Therefore, the platform we are proposing here, that combines the advantages of nanostructured materials with those of the layer-by-layer self-assembling of polyelectrolytes, opens the doors to new and exciting possibilities for the development of enzymatic and affinity biosensors using different transdution modes.