Nickel(II)-selective sensor based on dibenzo-18-crown-6 in PVC matrix

Nickel(II)-selective sensors have been fabricated from poly(vinyl chloride) (PVC) matrix membranes containing neutral carrier dibenzo-18-crown-6 as electroactive material, sodium tetraphenylborate (NaTPB) as an anion excluder and tris-(2-ethylhexyl) phosphate (TEHP) as plasticizing solvent mediator. The membrane having the composition of crown ether:NaTPB:TEHP:PVC in the ratio 10:1:200:200 (w/w) exhibits best results with linear potential response in the concentration range of 1.0 × 10⁻⁵ to 1.0 × 10⁻¹ M and a Nernstian slope of 29.5 mV/decade of activity between 2.6 and 6.8. The sensor exhibits a fast response time of <25 s, is inert towards non-aqueous medium up to 15% (v/v) and was used over a period of 4 months with good reproducibility. It is selective over a number of mono-, bi- and trivalent cations. The practical utility of the sensor has been demonstrated by using it as an indicator electrode in the potentiometric titration of Ni²⁺ against EDTA and also for the estimation of Ni²⁺ in some Indian brand chocolates.     

二苯并-24-王冠-8、KI体系萃取痕量铜

王冠化合物选择性地结合阳离子,使无机盐溶于有机溶剂及类似酶功能的特性在分析化学、有机合成、高分子合成、金属离子的捕集和分离,以及对光学异构体的拆分、酶模拟、生物化学、生物物理、医药及农业等方面应用前景广泛。     

A new Zn(II)-selective potentiometric sensor based on 4-tert-butylcalix[4]arene in PVC matrix

Poly(vinyl chloride) (PVC) based membranes containing 4-tert-butylcalix[4]arene (I) as an electroactive material alongwith anion excluder sodiumtetraphenylborate (NaTPB) and plasticizer tri-butylphosphate (TBP) have been developed to fabricate a new zinc-selective sensor. Out of various compositions, the best performance was exhibited by the membrane having I, NaTPB, TBP and PVC in the ratio 8:5:100:200 (w/w). The sensor works well in the concentration range 9.8 × 10⁻⁶ to 1.0 × 10⁻¹ mol dm⁻³ with a near-Nernstian slope of 28.0 ± 1.0 mV/decade of activity. The detection limit is down to 5.0 × 10⁻⁷ mol dm⁻³. The working pH range of this sensor is 2.5–4.3 and it works well in partially non-aqueous medium up to 15% (v/v) (methanol, ethanol and acetone). It exhibits a fast response time of 30 s and could be used for more than four months without any considerable change in response characteristics. It has excellent selectivity for Zn(II) over other mono-, bi- and trivalent cations which have been reported to cause interference in the working of other sensors. It has been successfully used as an indicator electrode in the potentiometric titration of Zn(II) against EDTA and also to estimate zinc ions in industrial waste waters.     

Thermodynamics of cesium cation complexation with dibenzo-24-crown-8 in mixed nonaqueous solvents

Thermodynamics of complexation of cesium cation by dibenzo-24-crown-8 was studied in three binary solvent mixtures: acetonitrile-nitromethane (AN/NM),N,N-dimethylformamide-nitromethane (DMF/NM) and acetonitrile-propylene carbonate (AN/PC) using the¹³³Cs-NMR technique. In all cases the variation of the formation constant,K _f, with the solvent composition was monotonic:K _f increased as the mole-% of the solvent of low donicity was increased. The temperature dependence ofK _f indicated that the complexes are generally enthalpy stabilized, but entropy destabilized. The enthalpy and entropy of complexation reactions are quite sensitive to the solvent composition. However, their variation with solvent composition was not monotonic but showed maxima or minima at the isosolvation points of the cation or the complexed cation. In all cases an enthalpy-entropy compensating effect was observed.     

Isomeric 2,6-pyridino-cryptands based on dibenzo-24-crown-8

Cryptands 4 and 5 were synthesized from cis- and trans-bis(hydroxymethylbenzo)-24-crown-8 by reaction with pyridine-2,6-dicarboxylic acid chloride in 42 and 48% yields, respectively. The new cryptands form pseudorotaxanes with the paraquat derivative N,N'-bis(beta-hydroxyethyl)-4,4'-bipyridinium bis(hexafluorophosphate) ("paraquat diol", 6): Ka=1.0x10(4) and 1.4x10(4) M-1, respectively. The cryptands also form complexes with ammonium hexafluorophosphate. Formation of the paraquat/cryptand-based pseudorotaxanes can be switched off and on in a controllable manner on the basis of the cryptands' abilities to complex KPF6 strongly, providing a new mechanism for control of molecular shuttles. K+ displaces paraquat diol from the cryptands, converting yellow-orange solutions to colorless; however, addition of 18-crown-6 binds the KPF6 and allows the colored cryptand-paraquat complex to reform. Crystal structures are reported for both cryptands, both paraquat diol-based pseudorotaxanes, both NH4PF6 complexes, and both KPF6 complexes.     

Calcium(II)-selective potentiometric sensor based on p -isopropylcalix6arene in PVC matrix

In Japan, large amounts of fertilizer nitrogen are applied to tea plantations. We collected samples of tea plantation soil each season for a year. Samples were analyzed for their contents of various inorganic chemicals and total N. Nitrogen was present mainly in the top 0 to 30?cm of soil. However, at times the concentration of nitrate N in the soil water was more than 35?mg?L^?1, even in the deepest layers. The contents of various metal elements in the soil were examined. Ba, Fe, Sr and Zn contents were high in the top 0 to 30?cm of soil. But Al and Mn contents were not always high in the top 0 to 30?cm of soil. From the correlation analysis among contents of various inorganic chemicals, it was suggested that increased leaching of Al, Mn, and Zn from tea plantation soil occurred with increased nitrate N concentration.     

A novel cobalt(II)-selective potentiometric sensor based on p-(4-n-butylphenylazo)calix[4]arene

A new poly(vinyl chloride)-based membranes containing p-(4-n-butylphenylazo)calix[4]arene (I) as an electroactive material along with sodiumtetraphenylborate (NaTPB), and dibutyl(butyl)phosphonate in the ratio 10:100:1:200 (I:DBBP:NaTPB:PVC) (w/w) was used to fabricate a new cobalt(II)-selective sensor. It exhibited a working concentration range of 9.2 × 10⁻⁶ to 1.0 × 10⁻¹ M, with a Nernstian slope of 29.0 ± 1.0 mV/decade of activity and the response time of 25 s. This sensor shows the detection limit of 4.0 × 10⁻⁶ M. Its potential response remains unaffected of pH in the range, 4.0-7.2, and the cell assembly can be used successfully in partially non-aqueous medium (up to 10%, v/v) without significant change in the slope of working concentration range. The sensor has a lifetime of about 3 months and exhibits excellent selectivity over a number of mono-, bi-, and tri-valent cations including alkali, alkaline earth metal, heavy and transition metal ions. It can be used as an indicator electrode for the end point determination in the potentiometric titration of cobalt ions against ethylenediaminetetraacetic acid (EDTA) as well as for the determination of cobalt ion concentration in real samples.     

Comparative studies on Tb (III)-selective PVC membrane sensors

A new terbium selective sensor based on N-(2-hydroxyphenyl)-3-(2-hydroxyphenylhydroxyphenylimino)-N-phenylbutanamidine (L₁) and N,N′-bis((1H-indole-3-yl)methylene)butane-1,4 diamine (L₂) as a ionophore is reported. Effect of various plasticizers; 2-nitrophenyloctylether (o-NPOE), dibutyl butylphosphonate (DBBP), chloronaphthelene (CN), dioctylphthalate (DOP) and tri-(2-ethylhexyl)phosphate (TEHP) with anion excluder, potassium tetrakis (p-chloropheny1)borate (KTpClPB) have been studied. The membrane with a composition of ionophore (L₁):KTpClPB:PVC:o-NPOE (w/w, %) in ratio of 3.0:5.0:30.0:62.0 exhibited enhanced selectivity towards terbium ions (III) in the concentration range of 3.5 × 10⁻⁷ to 1.0 × 10⁻² M with a detection limit of 1.2 × 10⁻⁷ M and a Nernstian slope (20.0 ± 0.5 mV dec⁻¹ activity). The sensors showed the working pH range to be 3.5-7.5 with response time of 11 s. The sensor has been found to work satisfactorily in partially non-aqueous media up to 15% (v/v) content of methanol, ethanol or acetonitrile and could be used for a period of 3 months. The selectivity coefficients indicated high selectivity for terbium (III). The fast and stable response, good reproducibility and long-term stability of the sensors were observed. The application of the sensor has been demonstrated in determination of terbium (III) ions in spiked water samples.     

PVC based 5,10,15,20-tetrakis (4-methoxyphenyl) porphyrinatocobalt(II) membrane potentiometric sensor for arsenite

PVC based membranes of 5,10,15,20-tetrakis(4-methoxyphenyl)porphyrinatocobalt(II) (TMOPP-Co) (I) as electroactive material with dibutyl butyl phosphonate (DBBP), dioctyl phthalate (DOP), 1-chloronaphthalene (CN), tri-n-butyl phosphate (TBP) and tris(2-ethylhexyl) phosphate (TEP) as plasticising solvent mediators have been prepared and tried for arsenite determination. The membrane having a composition 150:5:150 (PVC:I:DBBP) exhibited the best results with linear potential response in the concentration range of 7.9 × 10⁻⁵ to 1.0 × 10⁻¹ M of AsO₂⁻ with a slope of 28.8 mV/decade. The useful pH range of the sensor is 6.0-10.5. The membrane worked satisfactorily in non-aqueous medium up to 5% (v/v) non-aqueous content. The selectivity coefficient values for mono- and divalent anions indicate good selectivity for arsenite over a large number of anions.     

Solvent extraction separation of uranium(VI) with dibenzo-24-crown-8

Uranium(VI) was quantitatively extracted with 0.01M DB-24-crown-8 in nitrobenzene from 6 to 10M hydrochloric acid. From the organic phase uranium was stripped with 2M nitric acid and determined spectrophotometrically with PAR at 530 nm. Uranium(VI) was separated from a large number of elements in binary mixtures as well as from multicomponent mixtures. The method was extended to the analysis of uranium in geological samples and animal bone.     

New bis(benzimidazole) cations for threading through dibenzo-24-crown-8

[reaction: see text] We report a simple bis(benzimidazole) dication which can act as new template for threading through dibenzo-24-crown-8. The effect of the solvent and counterion on the magnitude of the binding interaction and on the hydrogen bonding array in the solid state is described.     

Zinc(II)-selective ratiometric fluorescent sensors based on inhibition of excited-state intramolecular proton transfer

To develop a zinc(II)-selective emission ratiometric probe suitable for biological applications, we explored the cation-induced inhibition of excited-state intramolecular proton transfer (ESIPT) with a series of 2-(2'-benzenesulfonamidophenyl)benzimidazole derivatives. In the absence of Zn(II) at neutral pH, the fluorophores undergo ESIPT to yield a highly Stokes' shifted emission from the proton-transfer tautomer. Coordination of Zn(II) inhibits the ESIPT process and yields a significant hypsochromic shift of the fluorescence emission maximum. Whereas the paramagnetic metal cations Cu(II), Fe(II), Ni(II), Co(II), and Mn(II) result in fluorescence quenching, the emission response is not altered by millimolar concentrations of Ca(II) or Mg(II), rendering the sensors selective for Zn(II) among all biologically important metal cations. Due to the modular architecture of the fluorophore, the Zn(II) binding affinity can be readily tuned by implementing simple structural modifications. The synthesized probes are suitable to gauge free Zn(II) concentrations in the micromolar to picomolar range under physiological conditions.     

Crystal Structures of Dibenzo-13-crown-4 and sym-(2-Picolyloxy)dibenzo-13-crown-4

Solid-state structures are determined for two compounds which containdibenzo-13-crown-4 rings. These include the parent crown etherdibenzo-13-crown-4 and its lariat ether derivativesym-(2-picolyloxy)dibenzo-13-crown-4. The solid-state structure ofdibenzo-13-crown-4 is complicated by disorder of the carbon atoms in theethylene and propylene bridges. The asymmetric unit of the crystal for thelariat ether derivative consists of two chemically identical, butcrystallographically different, molecules.     

An efficient synthesis of 4,4′,5,5′-tetraiododibenzo-24-crown-8 and its highly conjugated derivatives

4,4′,5,5′-Tetraiododibenzo-24-crown-8 (9), a practical building block, was prepared under efficient and mild reaction conditions starting from the simple starting material, catechol (1). Highly conjugated 4,4′,5,5′-tetraethynyldibenzo-24-crown-8 (10a,b) were prepared via a Sonogashira coupling reaction from tetraiodocrown ether 9. These highly conjugated crown ethers form complexes in CD₂Cl₂ with dibenzylammonium hexafluorophosphate in a 1:1 ratio. Emission spectrum of pseudorotaxane 11 shows a dramatic shift from the non-complexed precursor.     

Supramolecular phthalocyanine dimers based on the secondary dialkylammonium cation/dibenzo-24-crown-8 recognition motif

[formula: see text] New unsymmetrically substituted DB24C8-phthalocyanines, which are able to form complexes with suitable dialkylammonium cations, have been prepared. These complexes most probably have a pseudorotaxane geometry.     

Comparative studies of neodymium (III)-selective PVC membrane sensors

Sensors based on two neutral ionophores, N,N′-bis((1H-pyrrol-2-yl)methylene)cyclohexane-1,2-diamine (L₁) and 3,3′-(cyclohexane-1,2-diylbis(azan-1-yl-1-ylidene)bis(methan-1-yl-1-ylidene)bis(5-hydroxymethyl)pyridine-2-ol) (L₂) are described for quantification of neodymium (III). Effect of various plasticizers; 2-nitrophenyloctylether (o-NPOE), dibutyl butylphosphonate (DBBP), tri-n-butyl phosphates (TBP), dioctylpthalate (DOP) and chloronapthalen (CN) and anion excluder, sodiumtetraphenylborate (NaTPB) has been studied. The membrane composition of PVC:o-NPOE:ionophore (L₁):NaTPB (w/w; mg) of 150:300:5:5 exhibited best performance. The sensor with ionophore (L₁) exhibits significantly enhanced selectivity towards neodymium (III) in the concentration range 5.0 × 10⁻⁷ to 1.0 × 10⁻² M with a detection limit of 1.0 × 10⁻⁷ M and a Nernstian compliance (19.8 ± 0.3 mV decade⁻¹ of activity) within pH range 4.0-8.0. The response time of sensor was found as 10 s. The influence of the membrane composition and possible interfering ions has also been investigated on the response properties of the electrode. The fast and stable response, good reproducibility and long-term stability of the sensor are observed. The sensor has been found to work satisfactorily in partially non-aqueous media up to 20% (v/v) content of methanol, ethanol or acetonitrile and could be used for a period of 3 months. The selectivity coefficients determined by using fixed interference method (FIM) indicate high selectivity for neodymium. The proposed electrode shows fairly good discrimination of neodymium (III) from other cations. The application of prepared sensor has been demonstrated in the determination of neodymium (III) in spiked water samples.     

Asymmetrical Schiff Bases as Carriers in PVC Membrane Electrodes for Cadmium (II) Ions

5‐[((4‐Methyl phenyl) azo)‐N‐(6‐amino‐2‐pyridin) salicylaldimine] (S₁), and 5‐[((4‐methyl phenyl) azo)‐N‐(2‐diamino‐2‐cyano‐1‐ethyl cyanide) salicylaldehyde] (S₂) with N and O donor atoms are effective ionophores to make Cd²⁺‐selective membrane electrodes. The electrodes based on S₁ and S₂ exhibits a Nernstian or near‐Nernstian response for cadmium ion over a wide concentration range 1.5×10^?1–7.5×10^?7 with a slope of 28 and 2.0×10^?1–4.0×10^?7 with a slope of 22, respectively. They have quick response and can be used for three or four months without any divergence in potential. The proposed sensors show fairly good selectivity over some alkali, alkaline earth, transition and heavy metal ions. The electrodes based on S₁ and S₂ can be used in the pH range 3.5–9. These electrodes were used as an indicator electrode in potentiometric titration of cadmium ion with EDTA and in the direct determination of cadmium ion in aqueous solutions.     

New lead (II) selective membrane potentiometric sensors based on chiral 2,6-bis-pyridinecarboximide derivatives

New membrane sensors with cylindrical configuration for lead (II) ions are described based on the use of three newly synthesized pyridine carboximide derivatives as neutral ionophores in plasticized PVC membranes. The sensors exhibit significantly enhanced response towards lead (II) ions over the concentration range 4×10⁻⁶-1×10⁻² mol l⁻¹ at pH 4.5-7 with a lower detection limit of 0.4-3.7 μg ml⁻¹. The sensors display near-Nernstian slope of 26.0-33.1 mV per decade for Pb(II) ions. Effects of plasticizers, lipophilic salts and various foreign common ions are tested. The sensors show long life span, good selectivity for Pb(II) over a wide variety of other metal ions, long term stability, high reproducibility, and fast response. Validation of the method by measuring the lower detection limit, range, accuracy, precision, repeatability and between-day-variability reveals good performance characteristics of the proposed sensors. The sensors are used for direct determination of lead in stack emissions of lead smelters, assay of lead in rocks and monitoring of potentiometric titration of Pb(II) with EDTA. The results obtained agree fairly well with data obtained by atomic absorption spectrometry.