首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献,搜索用时 31 毫秒
1.
Arsenic contamination of natural waters is a worldwide concern, as the drinking water supplies for large populations can have high concentrations of arsenic. Traditional techniques to detect arsenic in natural water samples can be costly and time-consuming; therefore, robust and inexpensive methods to detect arsenic in water are highly desirable. Additionally, methods for detecting arsenic in the field have been greatly sought after. This article focuses on the use of bacteria-based assays as an emerging method that is both robust and inexpensive for the detection of arsenic in groundwater both in the field and in the laboratory. The arsenic detection elements in bacteria-based bioassays are biosensor–reporter strains; genetically modified strains of, e.g., Escherichia coli, Bacillus subtilis, Staphylococcus aureus, and Rhodopseudomonas palustris. In response to the presence of arsenic, such bacteria produce a reporter protein, the amount or activity of which is measured in the bioassay. Some of these bacterial biosensor–reporters have been successfully utilized for comparative in-field analyses through the use of simple solution-based assays, but future methods may concentrate on miniaturization using fiberoptics or microfluidics platforms. Additionally, there are other potential emerging bioassays for the detection of arsenic in natural waters including nematodes and clams.  相似文献   

2.
燃煤电厂砷、硒、铅的排放与控制技术研究进展   总被引:3,自引:0,他引:3  
煤炭是中国重要的能源资源,而中国煤中重金属砷、硒、铅含量较高,燃煤电厂已经成为重要的砷、硒、铅排放源之一。针对电厂燃煤带来严峻的砷、硒、铅污染问题, 本文首先介绍了燃煤释放的砷、硒、铅排放量大且危害性强,概述了世界各国关于重金属排放控制的相关政策法规,指出中国对燃煤重金属砷、硒、铅的排放控制势在必行;其次从煤中赋存形态、燃烧过程中的形态转化和质量分布三个方面阐释了燃煤过程中砷、硒、铅的迁移转化规律,重点描述了砷、硒、铅在颗粒物上的形态特征和尺度分布;最后综述了燃烧前、燃烧中和燃烧后对砷、硒、铅的排放控制技术,详述了吸附剂捕集和烟气净化装置协同脱除的研究进展,并论述了低低温除尘器和团聚技术对砷、硒、铅的强化脱除潜力。以期为燃煤电厂重金属砷、硒、铅超低排放的实现提供参考和指导。  相似文献   

3.
《Electroanalysis》2005,17(20):1835-1840
An L ‐cysteine modified gold electrode for the determination of copper in the presence of various amounts of arsenic with anodic stripping voltammetry has been studied. The electrode was fabricated by immersing a gold electrode in an ethanol solution of 5mM L ‐cysteine for 60 min. Various parameters, such as the effect of different supporting electrolytes, the pH of the electrolyte and the deposition potential were investigated. Under optimum conditions, copper was accumulated at ?0.3 V (vs. SEC) for 60 s in 0.1 M phosphate buffer pH 5.0 in the presence of different amounts of arsenic. Essentially the same sensitivities (0.33±0.001 μA/μM) and limits of detection (0.13±0.002 μM) of copper were obtained with various amount of arsenic in the range 2 μM to 20 μM.  相似文献   

4.
Arsenic is the toxic element, which creates several problems in human being specially when inhaled through air. So the accurate and precise measurement of arsenic in suspended particulate matter (SPM) is of prime importance as it gives information about the level of toxicity in the environment, and preventive measures could be taken in the effective areas. Quality assurance is equally important in the measurement of arsenic in SPM samples before making any decision. The quality and reliability of the data of such volatile elements depends upon the measurement of uncertainty of each step involved from sampling to analysis. The analytical results quantifying uncertainty gives a measure of the confidence level of the concerned laboratory. So the main objective of this study was to determine arsenic content in SPM samples with uncertainty budget and to find out various potential sources of uncertainty, which affects the results. Keeping these facts, we have selected seven diverse sites of Delhi (National Capital of India) for quantification of arsenic content in SPM samples with uncertainty budget following sampling by HVS to analysis by Atomic Absorption Spectrometer-Hydride Generator (AAS-HG). In the measurement of arsenic in SPM samples so many steps are involved from sampling to final result and we have considered various potential sources of uncertainties. The calculation of uncertainty is based on ISO/IEC17025: 2005 document and EURACHEM guideline. It has been found that the final results mostly depend on the uncertainty in measurement mainly due to repeatability, final volume prepared for analysis, weighing balance and sampling by HVS. After the analysis of data of seven diverse sites of Delhi, it has been concluded that during the period from 31st Jan. 2008 to 7th Feb. 2008 the arsenic concentration varies from 1.44 ± 0.25 to 5.58 ± 0.55 ng/m3 with 95% confidence level (k = 2).  相似文献   

5.
The state of an arsenic layer electrodeposited at various potentials on platinum electrodes has been examined electrochemically. The relation between the state and the electrocatalytic activity for hydrogen evolution has been investigated. The number of vacant sites have been found to increase with lowering of the deposition potential. The activity has been found to depend not on the amount of deposited arsenic but on the number of vacant sites. The difference in the effects of arsenic and of copper on hydrogen evolution is pointed out. This is attributed to the difference in the affinity of the ad-atoms for hydrogen.  相似文献   

6.
Lim TS  Davila A  Zand K  Wallace DC  Burke PJ 《Lab on a chip》2012,12(15):2719-2725
It has been reported that mitochondrial metabolic and biophysical parameters are associated with degenerative diseases and the aging process. To evaluate these biochemical parameters, current technology requires several hundred milligrams of isolated mitochondria for functional assays. Here, we demonstrate manufacturable wafer-scale mitochondrial functional assay lab-on-a-chip devices, which require mitochondrial protein quantities three orders of magnitude less than current assays, integrated onto 4' standard silicon wafer with new fabrication processes and materials. Membrane potential changes of isolated mitochondria from various well-established cell lines such as human HeLa cell line (Heb7A), human osteosarcoma cell line (143b) and mouse skeletal muscle tissue were investigated and compared. This second generation integrated lab-on-a-chip system developed here shows enhanced structural durability and reproducibility while increasing the sensitivity to changes in mitochondrial membrane potential by an order of magnitude as compared to first generation technologies. We envision this system to be a great candidate to substitute current mitochondrial assay systems.  相似文献   

7.
Jaya S  Rao TP  Rao GP 《Talanta》1987,34(6):574-576
The anodic-stripping voltammetric behaviour of arsenic(III) at a glassy-carbon electrode copper-coated in situ has been investigated. The effects of copper concentration, acidity, deposition potential and sweep rate on the stripping peak have been examined and criteria are given for the choice of experimental conditions. The procedure is applicable to the determination of 7.5-750 ng/ml of arsenic levels and is useful for the analysis of various types of water sample.  相似文献   

8.
The concentrations of total arsenic and arsenic species in the complete organism of the crayfish Procambarus clarkii and its various parts (hepatopancreas, tail, and remaining parts) were analyzed in order to discover the distribution of arsenic and its species. With this information it will be possible to establish where the chemical forms of this metalloid tend to accumulate and what risks may derive from the contents and species present in the edible parts of this crustacean. The total arsenic content in the complete organism and in the various parts analyzed ranged from 2.5 to 12 µg g?1 dry mass (DM), with inorganic arsenic representing 18 to 34% of total arsenic. The arsenical composition varied according to the part of the crayfish considered. The hepatopancreas had the highest levels of total arsenic (9.2–12 µg g?1 DM) and inorganic arsenic (2.7–3.2 µg g?1 DM). The tail (edible part) had the lowest levels of both total arsenic (2.5–2.6 µg g?1 DM) and inorganic arsenic (0.46–0.64 µg g?1 DM). The predominant organoarsenical species were the dimethylarsinoylribosides: glycerol riboside in the hepatopancreas, sulfate riboside in the tail, and sulfonate and phosphate ribosides in the remaining parts. Copyright © 2002 John Wiley & Sons, Ltd.  相似文献   

9.
The ability to detect low concentrations of analytes and in particular low‐abundance biomarkers is of fundamental importance, e.g., for early‐stage disease diagnosis. The prospect of reaching the ultimate limit of detection has driven the development of single‐molecule bioaffinity assays. While many review articles have highlighted the potentials of single‐molecule technologies for analytical and diagnostic applications, these technologies are not as widespread in real‐world applications as one should expect. This Review provides a theoretical background on single‐molecule—or better digital—assays to critically assess their potential compared to traditional analog assays. Selected examples from the literature include bioaffinity assays for the detection of biomolecules such as proteins, nucleic acids, and viruses. The structure of the Review highlights the versatility of optical single‐molecule labeling techniques, including enzymatic amplification, molecular labels, and innovative nanomaterials.  相似文献   

10.
Feeney R  Kounaves SP 《Talanta》2002,58(1):23-31
There are several U.S. EPA approved methodologies for the determination of arsenic in ground water. Such technologies are lab-based, time intensive and can lead to a large capital cost for multi-sample analysis. In light of the number of sites found to contain arsenic at levels higher than the maximum contaminant level (MCL), on-site screening and monitoring systems are an attractive alternative. This review article summarizes several examples in the recent literature to illustrate the breadth of work in voltammetric analysis of arsenic in environmental samples. Also, included are recent voltammetric results, obtained with a microfabricated gold array and a field portable potentiostat, at an arsenic contaminated site in southern New Jersey.  相似文献   

11.
采用氢化物发生-冷阱捕集-原子吸收光谱法(HG-CT-AAS)测定了雄黄染毒大鼠血中不同形态砷的含量.结果表明,雄黄在大鼠体内的代谢产物为无机砷、一甲基胂酸和二甲基胂酸,其中二甲基胂酸是主要代谢产物;3种形态砷的精密度、准确度、回收率及线性关系良好.  相似文献   

12.
The determination of arsenic by atomic-absorption spectrometry with use of a graphite-cloth ribbon placed inside various types of graphite tubes was investigated. It was found that the graphite-cloth ribbon greatly enhances the sensitivity for arsenic and reduces the interferences from various heavy metals, especially when it is placed inside a pyrolytic graphite tube and a nitric acid matrix is used. This is attributed to condensation of arsenic on the ribbon, owing to a temperature lag during the drying and ashing cycles, and to the formation of interlamellar compounds of arsenic with graphite.  相似文献   

13.
A kinetic method is described for the determination of microgram amounts of various organic iodine-containing compounds, based on their catalytic effect on the cerium(IV)/arsenic(III) reaction. The time required for a 15-mV change in potential is inversely proportional to the compound concentration.  相似文献   

14.
Yongjiang Zhang  Lu Li  Jia Cao 《Talanta》2010,80(5):1907-57
The eggshell membrane (ESM) contains several surface functional groups such as amines, amides and carboxylic groups with potential as SPE adsorbent for the retention of target species of interest. In this paper, the potential use of ESM, a typical biomaterial, as solid-phase extraction (SPE) adsorbent is evaluated for analysis of trace arsenic(V) in environmental water samples in combination with hydride generation atomic fluorescence spectrometry (HG-AFS). In order to obtain the satisfactory recovery of arsenic(V), various parameters including the desorption and enrichment conditions such as pH, the flow rate and the volume of sample solution, the amount of ESM and the content of sodium chloride were systematically optimized and the effects of co-existed ions were also investigated in detail. Under the optimal conditions, arsenic(V) could be easily extracted by the ESM packed cartridge and the breakthrough adsorption capacity was found to be 3.9 μg g−1. The favorable limit of detection (LOD) for arsenic(V) was found to be 0.001 μg L−1 with an enrichment factor of 33.3, and the relative standard deviations (R.S.Ds) was 2.1% for 0.6 μg L−1 arsenic (n = 11). The reproducibility among columns was satisfactory (R.S.D. among columns is less than 5%). The proposed method has been successfully applied to analysis of arsenic(V) in aqueous environmental samples, which suggests the ESM can be an excellent SPE adsorbent for arsenic(V) pretreatment and enrichment from real water samples.  相似文献   

15.
Dialkyltin salts are suitable as extractants for various oxygen-containing anions. They are particulary powerful for the extraction of arsenate and phosphate ions, but are also useful for liquid-liquid extraction of anions of dibasic acids. It is shown that the high extraction power of these dialkyltin complexes can be explained by formation of innersphere complexes with the extracted anions. A method is proposed for the separation of arsenic, phosphorus and silicon using dialkyltin salts. Applications to the extraction-spectrophotometric determination of phosphorus and arsenic in vanadium and steel, and to extraction/atomic absorption determinations of arsenic and phosphorus in metals and alloys are surveyed. The use of the dialkyltin salts for the neutron activation determination of arsenic and as active components in membranes of ion-selective electrodes for phosphorus(V) and arsenic(V) is demonstrated.  相似文献   

16.
The extraction of arsenic from freeze-dried apples and subsequent determination of individual arsenic species by HPLC-ICP-MS is described. Solvent extraction with sonication using various aqueous and aqueous/solvent mixtures was initially evaluated by measuring total arsenic extracted by ICP-MS. A two step procedure using overnight treatment with alpha-amylase enzyme followed by sonication for 6 h with 40:60 acetonitrile-water was found to provide good extraction efficiency. The concentration of arsenic extracted was compared with the concentration of total arsenic in the samples determined using ICP-MS after microwave digestion in order to calculate extraction efficiency. Individual arsenic species in the extracts were measured using HPLC-ICP-MS. The three most abundant arsenic species found were arsenite, arsenate and dimethylarsinic acid. Total arsenic concentrations in the freeze-dried apple samples ranged from 8.2 to 80.9 micrograms kg-1 As, dry mass. By HPLC-ICP-MS, the relative amount of inorganic arsenic in the samples ranged from 73 to 90% of the sum of the arsenic species detected in each sample.  相似文献   

17.
Various internal standards and analytical methods were investigated using certified reference materials to evaluate the accuracy of the quantitation of the total As in seafood. Inductively coupled plasma mass spectrometry (ICP-MS) was used to measure the total arsenic. Enhancement of the total arsenic in its concentration caused by the methanol matrix was clearly observed. Selenium (mass 77) was the best internal standard, and the standard addition method combined with the use of Se as an internal standard was the best analytical method. The total arsenic was determined in bluefin tuna, yellowfin tuna, bigeye tuna, and swordfish by ICP-MS. The concentrations of total arsenic in the seafoods ranged from 0.74 to 6.87 mg/kg.Various extraction procedures were also investigated using reference materials to evaluate the extraction efficiency of the different arsenic species in seafood. Inductively coupled plasma mass spectrometry (ICP-MS) was used in conjunction with high performance liquid chromatography (HPLC) to quantitate the arsenic species in seafood. The arsenic species were extracted from tuna fish (BCR 627) with water/methanol mixtures using sonication, a microwave-assisted system, and ultrasonic processor. The major species was arsenobetaine. The total arsenic extraction efficiency ranged from 81 to 87% for water and various methanol concentrations. Chromatograms of the arsenic species extracted from the Korea Research Institute of Standards and Science (KRISS) tuna, bluefin tuna, yellowfin tuna, bigeye tuna, and swordfish were obtained by the optimum extraction methods and the species were quantified.  相似文献   

18.
A sequential arsenic extraction method was developed that yielded extraction efficiencies (EE) that were approximately double those using current methods for terrestrial plants. The method was applied to plants from two arsenic contaminated sites and showed potential for risk assessment studies. In the method, plants were extracted first by 1:1 water-methanol followed by 0.1 M hydrochloric (HCl) acid. Total arsenic in plant and soil samples collected from contaminated sites was mineralized by acid digestion and detected by inductively coupled plasma-atomic emission spectrometry (ICP-AES) and hydride generation-atomic absorption spectrometry (HG-AAS). Arsenic speciation was done by high performance liquid chromatography coupled with HG-AAS (HPLC-HGAAS) and by HPLC coupled with ICP-mass spectrometry (HPLC-ICP-MS). Spike recovery experiments with arsenite (As(III)), arsenate (As(V)), methylarsonic acid (MA) and dimethylarsinic acid (DMA) showed stability of the species in the extraction processes. Speciation analysis by X-ray absorption near edge spectroscopy (XANES) demonstrated that no transformation of As(III) and As(V) occurred due to sample handling. Dilute HCl was efficient in extracting arsenic from plants; however, extraction and determination of organic species were difficult in this medium. Sequential extraction with 1:1 water-methanol followed by 0.1 M-HCl was most useful in extracting and speciating both organic and inorganic arsenic from plants. Trace amounts of MA and DMA in plants could be detected by HPLC-HGAAS aided by the process of separation and preconcentration of the sequential extraction method. Both organic and inorganic arsenic compounds could be detected simultaneously in synthetic gastric fluid extracts (GFE) but EEs by this method were lower than those of the sequential method. The developed sequential method was shown to be reliable and applicable to various terrestrial plants for arsenic extraction and speciation.  相似文献   

19.
龚仓  徐殿斗  马玲玲 《化学通报》2014,77(6):502-509
大气颗粒物中毒性准金属元素砷及其形态含量变化引起的环境健康问题受到了广泛关注。由于工业生产和煤燃烧等人类活动,砷普遍存在于多种环境介质中。排放到大气中的砷能够随气流进行长距离迁移,致使一些偏远区域大气中的砷含量明显超出欧盟的限制标准(6 ng/m3)。砷的毒性表达很大程度依赖其存在种态,无机砷毒性大于有机砷,且砷(Ⅲ)的毒性明显强于砷(Ⅴ)。本文概述了大气中砷的来源,并选取自2000年来的代表性成果比较了不同国家及不同功能区大气砷的含量变化,同时对1975年来多数关于大气颗粒物中砷形态变化特征的研究进行了评述。  相似文献   

20.
Identification of arsenic‐binding proteins is important for understanding arsenic health effects and for developing arsenic‐based therapeutics. We report here a strategy for the capture and identification of arsenic‐binding proteins in living cells. We designed an azide‐labeled arsenical, p‐azidophenylarsenoxide (PAzPAO), to serve bio‐orthogonal functions: the trivalent arsenical group binds to cellular proteins in situ, and the azide group facilitates click chemistry with dibenzylcyclooctyne. The selective and efficient capture of arsenic‐binding proteins enables subsequent enrichment and identification by shotgun proteomics. Applications of the technique are demonstrated using the A549 human lung carcinoma cells and two in vitro model systems. The technique enables the capture and identification of 48 arsenic‐binding proteins in A549 cells incubated with PAzPAO. Among the identified proteins are a series of antioxidant proteins (e.g., thioredoxin, peroxiredoxin, peroxide reductase, glutathione reductase, and protein disulfide isomerase) and glyceraldehyde‐3‐phosphate dehydrogenase. Identification of these functional proteins, along with studies of arsenic binding and enzymatic inhibition, points to these proteins as potential molecular targets that play important roles in arsenic‐induced health effects and in cancer treatment.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号