Electronic spectra of α,β-unsaturated carbonyl compounds—II : An evaluation of increments characteristic of structural features of β-oxy-α,β-unsaturated ketones

By comparing UV spectra of β-alkoxy-α,β-unsaturated ketones of established steric structure, spectral constants characteristic of the cis/trans configuration change and s-cis/s-trans and O-s-cis/O-s-trans conformation changes have been evaluated. These are: Δλ^cis_trans = 0, Δλ^s-cis_s-trans = 8 nm and Δλ^O-s-trans_O-s-cis = 6 nm. A comparison of cis-s-cis enol ethers with the parent enols yielded the increment for the intramolecular (“chelating”) H-bond, Δγ_chel = 24 nm. The methanol-induced bathochromic shift has been found to depend strongly on s-cis/s-trans isomerism. The substituent increments have been shown to be dependent on the degree of substitution in the reference molecule. The results obtained have been summarized in a set of spectral increments complementing the basic system of Woodward and the Fiesers.     

Isomerization of olefins catalysed by a CoCl2/Ph3P/NaBH4 system

The catalyst generated in situ using CoCl₂/Ph₃P/NaBH₄ in 1/3/1 ratio in THF at −10°C isomerizes 1-decene into predominantly cis-2-decene or trans-2-decene. Allyl benzene and safrole have been converted into the corresponding β-methylstyrenes. The catalyst also isomerizes cis,cis-1,5-cyclooctadiene to cis,cis-1,3-cyclooctadiene.     

Phosphinic complexes of rhenium and tungsten in reactions with stereoindicators

Stereoindicators (cis-4,4′-dimethoxystilbene (DMS) or cis-α,β-dinitrostilbene (DNS)) were used to investigate the donor/acceptor properties of the complexes trans-[ReCl(N₂)(dppe)₂] or trans-[W(CO)₄(dppe)]. The former induced cis/trans conversion of DMS, and the latter cis/trans conversion of DNS, both resulting from charge transfer (in the first case from DMS to the rhenium complex and, in the second case, from the tungsten cofnplex to DNS). The rhenium complex acts as an acceptor, and the tungsten complex as a donor in the framework of the stereoindicator approach.     

Stereoselective synthesis of cis- and trans-2′,5′-disubstituted N-arylpyrrolo[3′,4′:1,9](C60-I h )[5,6]fullerenes by the 1,3-dipolar cycloaddition of azomethine ylides from dialkyl aziridinedicarboxylates to fullerene C60

A stereoselective method for the synthesis of 2′,5′-disubstituted N-arylpyrrolofullerenes from anilines, alkyl glyoxylates, alkyl diazoacetates, and fullerene C₆₀ was proposed. The key step of the synthesis is the 1,3-dipolar cycloaddition reaction of fullerene with azomethine ylides generated by heating of dialkyl aziridinedicarboxylates. The thermal opening of the aziridine ring to azomethine ylide and the cycloaddition of the latter to C₆₀ at 100 °C are nearly completely stereoselective: only trans-adducts are formed from cis-aziridines, whereas trans-aziridines give exclusively cis-adducts.     

Stereochemical effects in the chemical ionization mass spectra of cyclic diols

The chemical ionization mass spectra of configurational isomers of many cyclic diols give substantial differences which are characteristic of their stereochemistry. For the cis-isomer of 1,3- and 1,4-cyclohexanediols, formation of a stable intramolecular proton bridge involving the OH groups gives rise to dominant MH⁺ peaks, suppressing the (M-H)⁺ peaks found in the spectra of the trans-isomers and monoalcohols. The stability of the proton bridge in cis-1,3-cyclohexanediol structures is decreased by a sterically interfering cis-5-methyl substituent, but increased by a cis-5-OH group due to additional proton solvation. cis-Stereochemistry also gives increased formation of the dimeric M₂H⁺ ions, but decreased formation of trimers, at higher diol concentrations, for the 1,3- and 1,4-diols. The similarity of the CI spectra of cis- and trans-1,2-cyclohexanediol are explicable in terms of the similarities of the most stable proton-bridged conformers; the reduced ring flexibility in cis- and trans-1,2-cyclopentanediols makes such similar structures unfavorable, as shown by the substantial differences between their CI spectra. The substantial, but expected, variations in behavior with temperature and reagent gas are useful for maximizing stereochemical effects on CI spectra; conditions of lowest energy are usually, but not always, the most useful.     

The vibrational spectra of cis,cis-,trans,trans- and cis,trans-1,4-dichloro-1,3-butadiene

The i.r. spectra of cis,cis,trans,_trans and cis,trans-1,4-dichloro-1,3-butadiene were recorded in cyclohexane solution in the region 600-40 cm⁻¹. Raman spectra, including polarization measurements of the neat liquids were obtained. Some previously unobserved fundamentals, particularly in the low frequency region, were assigned, and a few revisions in the earlier interpretations were made.Force fields containing 21 parameters for the cis,cis and the trans,trans compounds were constructed by transferring force constants from cis- and trans-1-chloro-1,3-butadiene. By mixing the force constants from these monochlorobutadienes a 29 parameter force field was derived for the cis,trans compound. The calculated r.m.s. amplitudes of vibration and perpendicular amplitude correction coefficients are presented.     

Quantum mechanical study of energetics and mechanisms of cis–trans isomerization of some four-membered heterocycles

Ab initio quantum mechanical calculations using density functional (B3LYP) method and 6-311G** basis set have been performed on two cis and trans conformers of 2,4-diphenyl thietane dioxide (DPTD), 2,4-diphenyl thietane (DPT), 2,4-diphenyl azetidine (DPA) and 2,4-diphenyl oxetane (DPO). The calculated stability energy for cis–trans isomerization in gas phase and in different solvents such as benzene, DMSO, water and methanol indicated that the cis conformer is more stable than trans in all above-mentioned compounds about 11–2 kcal mol^?1. In the next step, a transition states for cis–trans inter-conversion for all four-membered heterocycles (DPTD, DPT, DPA and DPO) were proposed in methanol as solvent. Thermodynamic functions such as standard enthalpies of isomerization (?Hº_iso), standard entropy of isomerization (?Sº_iso) and standard Gibbs free energy of isomerization (?Gº_iso) for all studied compounds were also evaluated. The calculation showed that the conversion of trans to cis isomer is exothermic and spontaneous. In all calculations, solvent effects were considered using a polarized continuum model.     

Reaction de metathese des olefines induite photochimiquement en presence d'un complexe de metal de transition : V. Intervention d'un complexe dinucleaire du tungstene

The photoinduced metathesis [W(CO)₆CCl₄hν] of cis- and trans-RCH=CHMe gives 2-butene in a very high trans but low cis stereoselectivity. Propene behaves like a cis olefin. These results are consistent with the proposal of a dinuclear tungsten intermediate, which requires high steric constraints in the transalkylidenation step.     

Synthesis and reactions of a monosubstituted dithiirane 1-oxide, 3-(9-triptycyl)dithiirane 1-oxide

A 3-monosubstituted dithiirane 1-oxide, 3-(9-triptycyl)dithiirane 1-oxide, was prepared for the first time, by the reaction of (9-triptycyl)diazomethane and S₈O. The dithiirane 1-oxide was obtained as cis- and trans-isomers, and the structure of the trans-isomer was verified by X-ray crystallography. The cis-isomer isomerized gradually to the trans-isomer in solution. The divalent sulfur atom of the cis- and trans-dithiirane 1-oxides were removed on treatment with triphenylphosphine to give the corresponding Z- and E-sulfines, respectively. The reaction of the trans-dithiirane 1-oxide with (Ph₃P)₂Pt(C₂H₄) provided the (sulfenato-thiolato)Pt^II complex, and that with Lawesson's reagent yielded the 1,3,4,2-trithiaphospholane and 1,2,4,5,3-tetrathiaphosphorinane derivatives.     

Mechanochemical-induced cis-to-trans isomerization of poly(2-ethynyl-3-n-octylthiophene) prepared with a Rh complex catalyst

Highly stereoregular polymerization of 2-ethynyl-3-n-octylthiophene was successfully performed with a [Rh(norbornadiene)Cl]₂ catalyst to produce the corresponding polymers in fairly high yields by using triethylamine or a mixture of it with other solvents as the polymerization solvent. We found that the obtained polymer using CHCl₃ was a mixture of cis-transoid form, ca. 68% and trans-transoid form, ca. 32% unlike our previous conjecture. Further, we found that the cis-to-trans isomerization can be also induced when the pristine predominant cis polymer was subjected to mechanochemical grinding (MCG) treatment at 77 K using a mortar filled with liquid nitrogen to decrease the cis content from ca. 68% to ca. 7%. The polymers obtained before and after the MCG treatment were characterized in detail using ¹H NMR, laser Raman, solution UV-vis, diffuse reflective UV-vis, and ESR methods in order to determine the geometry of the main-chain CC bonds in the polymer. The data showed that the polymer obtained by the treatment has a fairly distorted trans conjugation length, i.e., bent trans structure in which less mobile unpaired electrons generated by the rotational scission of the original cis CC bonds are stabilized.     

Chromatographic study of thermal reactions of cis- and trans-[Coen2 (OCOC6H4X)2]NO3 complexes in the solid phase

Thermal reactions of some cis- and trans-[Coen₂(OCOC₆H₄X)₂]NO₃ complexes mixed with ammonium or sodium chloride, nitrate and sulphate are reported. Reflectance spectra have shown a cis to trans thermal isomerization and, in the presence of NH₄Cl, the formation of trans-[Coen₂Cl₂]Y as final product. For the cis-isomers, the most interesting result is the chromatographic evidence of a stepwise reaction, resulting in the replacement of one carboxylato ligand by chloride and the formation of an intermediate species, characterized as trans-[Coen₂(OCOC₆H₄X)Cl]Y. These intermediate species, are hardly detectable in the corresponding reactions of the trans-isomers. These results may mean that in the trans-carboxylato compounds the reaction rate of the second step is higher than that of the first, while the reverse can be supposed in the corresponding reaction of the cis-isomers.     

Strukturuntersuchungen an mono- und bis-alkoxy(triphenylsilyl)-carben-komplexen des rheniums

Steric and electronic influences on bond lengths and angles at the carbene carbon atoms of cis-Re₂(CO)₉C(OR)SiPh₃ (I: R = CH₃, II, R = C₂H₅) and cis,trans-Re₂(CO)₈[C(OEt)SiPh₃]₂ (III) are discussed based on their structural analyses. I (ReRe 305.2(1) pm; ReC(carbene) 209(2) pm) and II (two independent molecules; ReRe 305.0(3) and 305.2(4) pm; ReC (carbene) 208(5) and 210(5) pm) differ by the cis and trans positions of the alkyl groups at the partial C(carbene)O double bonds. The change in configuration affects the bond angles at the carbene carbon. In III the carbene ligands are bonded to different rhenium atoms; cis to one Re atom and trans to the other Re atom (ReRe bond 309.1(2) pm). The ReC(carbene length of the trans- carbene ligand is significantly shorter (185(3) pm) than that of the cis-carbene ligand (208(3) pm).     

Darstellung von PdCl2-komplexen substituierter cis,cis-cycloocta-1,5-diene aussachtringen und den entsprechenden substituierten cis-1,2-divinylcyclobutanen. cis,trans-zuordnung 3,4-,3,7- und 3,8-disubstituierter cis,cis-cycloocta-1,5-diene

cis-1,2-Divinylcyclobutanes are transformed with dibenzonitrilepalladium(II) chloride into the corresponding cis,cis-cycloocta-1,5-diene-PdCl₂ complexes. When e.g. the 3-methyl-cis,cis-cycloocta-1,5-diene-PdCl₂ complex is prepared using trans- or cis-3-methyl-cis-1,2-divinylcyclobutane or the corresponding eight-membered ring. two PdCl₂ complexes with the methyl group in the equatorial or axial position are formed in different percentages. With the aid of ¹H NMR spectroscopy the cis- or trans-configurations of 3,4-, 3,7- or 3,8-disubstituted cis,cis-cycloocta-1,5-dienes can be determined unambiguously in PdCl₂ complexes.     

cis–trans Geometrical isomerization of bis(2-pyridinecarboxylato)nitrosylruthenium complex accompanying electrochemical one-electron reduction

cis-[Ru(NO)(CH₃CN)(pyca)₂] and trans-[Ru(NO)(OH)(pyca)₂] (pyca = 2-pyridinecarboxylato) were synthesized and characterized by X-ray crystallography. Electrochemical behaviors of cis-[Ru(NO)(CH₃CN)(pyca)₂] and cis-[Ru(NO)(CH₃O)(pyca)₂] in acetonitrile were studied. These complexes showed two reduction processes in CH₃CN. The controlled potential electrolyses of cis-[Ru(NO)(CH₃O)(pyca)₂] in a methanol–acetonitrile mixed solution were performed at the potential of the first reduction process. trans-[Ru(NO)(CH₃O)(pyca)₂] was isolated from the electrolyzed solution and characterized by IR and CV. The cis–trans geometrical change reaction occurred in the electrochemical one-electron reduction of cis-[Ru(NO)(CH₃O)(pyca)₂].     

The structure of organotin mercaptoesters

This paper describes the structural differences existing among various organotin mercaptoesters of the general formula R_nSn[S(CH₂)_1–2COOR′]_4–n. Infrared and Mössbauer spectroscopies were the methods of choice to investigate such differences and they have revealed that thioglycolate and 3-mercaptopropionate esters adopt cyclic cis- or trans-trigonal bipyramidal as well as trans-octahedral configurations, according to the composition of the organotin compounds and their mode of preparation. Structural relationship among organotin mercaptides and thioacetates are also discussed.     

Etude du comportement photochimique de complexes {PtCl2(oléfine)(amine)}, influence de la nature de l'olefine et de la configuration du complexe

Irradiation of complexes {PtCl₂(olefine)(amine)} leads to the departure of the olefinic ligand forming a dimeric compound {PtCl₂(amine)}₂ which has a trans configuration. The same behaviour is observed at different irradiation wavelengths, with variation of the nature of the coordinated olefin and with a cis or trans configuration of the starting compound. Experimental results show that the primary photochemical reaction pathway arises probably via a (d → π^★ C₂H₄) charge transfer existed state. A simultaneous cis → trans photoisomerization is observed in the case of the cis complexes.     

The preparation of cis- and trans-[PtH(C6Cl5)(PEt3)2 and a study of the “hydride-donor capacity” of the complexes trans- [PtH(C6X5(PEt3)2] (X = F and Cl)

The preparations of cis- and trans-[PtH(C₆Cl₅)(PEt₃)₂] by thermal decomposition of cis- and trans-[Pt(OCHO)(C₆Cl₅)(PEt₃)₂], respectively, are reported. Also described are cis- and trans-[Pt(SnCl₃)(C₆Cl₅)(PEt₃)₂], obtained by treating SnCl₂ with cis- and trans-[PtCl(C₆,Cl₅)(PEt₃)₂], respectively. It is shown that while trans- [PtH(C₆Cl₅)(PEt₃)₂] does not form hydride-bridged complexes in the presence of trans-(PtH(MeOH)(PEt₃)₂]⁺, the corresponding complex trans-[PtH(C₆)(PEt₃)₂] reacts with the same solvento complex, in methanol, giving labile [(PEt₃)₂HPt(-μH)Pt(C₆F₅)(PEt₃)₂]⁺.     

Syntheses and reactions of terpene β-hydroxyselenides and β-hydroxydiselenides

A convenient method for the synthesis of optically active trans-hydroxyselenides and trans-hydroxydiselenides from the bicyclic terpene group based on the reactions of sodium selenide or sodium diselenide with cis- and trans-(+)-3-carane, trans-(+)-2-carane and (?)-β-pinane epoxides is described. The corresponding cis-hydroxy and cis-methoxydiselenides were obtained in the reaction of sodium diselenide with β-hydroxy- and β-methoxytosylates. The influence of a hydroxy group at the β-position on the diastereomeric ratio of the products of the asymmetric methoxyselenenylation of styrene has been established by composition of the products, crystal structure analyses, and theoretical calculations using a DFT method on the B3LYP level (6-311G(d)).     

Conformations and steric and stacking interactions of trisubstituted ureas and thioureas with alkyl and phenyl groups

The monomeric ν(N—H) vibrations of various trisubstituted ureas of the R₂UPh type and -thioureas of the R₂TUPh type have been studied. The trans—out isomerism in the former and the trans—out—cis isomerism in the latter are discussed from the point of view of steric effect. The monomeric ν(N—H) vibrations of RPhUPh and RPhTUPh are also examined. The single band appearing in the spectrum of both ureas is characteristic of the cis form; this suggests the existence of phenyl—phenyl interaction (the stacking interaction proposed by Galabov et al. [10]). Behavior of ν(N—H) vibrations at several concentrations is shown to be clearly different in the three forms (trans, out and cis). The presence of the cis form is confirmed by solvent effect experiments.     

Identification and conformational significance of amide group vibrational modes contributing to the near-infrared spectra of lactams of trans and mixed configuration

After identifying relevant fundamental vibrational bands in the infrared, amide group overtone and combination vibrational modes contributing to the near-i.r. absorption spectra of a series of lactams of trans and of mixed cis and trans conformation have been elucidated. Experimental studies reveal that the spectral behavior of the trans lactams (11- through 13-membered rings) parallels that for trans open-chain secondary amides more closely than that for small-ring, cis lactams. These findings demonstrate the potential utility of near-i.r. spectrometry to serve as a probe for the conformation of the secondary amide grouping. In addition, a (ν_NH + δ_NH) combination band found in the spectra of both conformational classes of lactam may be able to distinguish between cyclic and acyclic secondary amide groupings. These spectral characteristics are sufficiently distinctive that evidence for both cyclic cis and trans components is readily discerned in the near-i.r. spectra of 2-azacyclononanone, a lactam of mixed conformation.