Preparation of a disperse Fe–Al–Mo system and production of bulk materials on its base

We show the feasibility to prepare a disperse Fe–Al–Mo polymetal system by contact exchange in chloride-containing aqueous solutions. Reaction schemes are suggested to describe the processes that proceed on aluminum microparticles in aqueous solutions where the relevant metal ions are contained. The system is shown to be a precursor for intermetallic compounds, which are generated by high-temperature processes, e.g., spark plasma sintering (SPS).     

Improved silica xerogel film processing for MALDI-TOF–MS quantitative analysis of peptides and small molecules

In this work, sol–gel derived silica films were prepared for direct desorption/ionization of organic compounds in MALDI-TOF–MS analysis with the aim of improving method precision and of reducing interfering signals at low m/z values. Two commonly used MALDI matrices, 2,5-dihydroxybenzoic acid (DHB) and α-cyano-4-hydroxycinnamic acid (CHCA), were incorporated into the sol–gel network in order to absorb laser energy and to induce analyte desorption/ionization with low or absent background signals in the mass spectra. To achieve a reproducible xerogel film formation, experimental parameters for its deposition were optimized. The gel matrices were characterized by Fourier Transform Infrared (FT-IR) spectroscopy, X-ray Diffraction (XRD), and Scanning Electron Microscopy (SEM) analysis. The results proved the embedding of the matrix molecules in a disperse form into the homogeneous sol–gel material. The sol–gel matrix was then tested for the qualitative and quantitative analysis of two reference peptides, such as Bradykinin and P₁₄R. In addition, spectral quality and method performance were assessed for quantitation of melamine, a low-molecular weight compound of food safety concern. In all cases, high quality spectra and excellent mass accuracy (between 3.5 and 13 ppm) were observed. Furthermore, the experimental results evidenced a significant improvement of the measurement repeatability on spot and between spots (relative standard deviation <10%), with respect to the traditional dried-droplet sample deposition method. Good sensitivity and linearity in the concentration range explored were obtained for peptides and melamine, demonstrating the suitability of the sol–gel-based matrix to be used for quantitative analysis.     

Capacity of layered cathode materials for lithium-ion batteries — a theoretical study and experimental evaluation

The theoretical capacity and the vacancy concentration of metal-ion-doped layered compounds such as LiCoO₂, LiNiO₂, and LiMnO₂, acting as cathodes in high-voltage lithium-ion batteries are calculated. The capacity shows strong dependence on valency of the doped metal ion and vacancy concentration. Experimental verification carried out to check the validity of the proposed equation for aluminium substitution into the potential layered materials shows good agreement between the experimental and theoretical capacity values. The vacancy concentration values of doped layered compounds have been found to be high when compared with that of the doped spinel compounds.     

Comparative analysis of variational iteration method and Haar wavelet method for the numerical solutions of Burgers–Huxley and Huxley equations

In this paper, variational iteration method is applied to compute the numerical solutions of non-linear partial differential equations like Huxley and Burgers–Huxley equation. The approximate solutions of the Huxley and Burgers–Huxley equations are compared with the Haar wavelet solution as well as with the exact solutions. The present method is very simple, effective and convenient analytical method with small computational overhead.     

Analytical potential of a laser ablation–glow discharge–optical emission spectrometry system for the analysis of conducting and insulating materials

The analytical capabilities of a glow discharge (GD) as a secondary source for excitation/ionization of the material provided by laser ablation (LA) have been compared to conventional laser induced breakdown spectroscopy (LIBS). In LA–GD both sources can be independently adjusted to optimize the sampling process and then its subsequent excitation. This could involve a number of analytical performance advantages, such as reduced matrix dependence, greater precision and sensitivity than those encountered in LIBS. For such purpose, an ablation chamber design including two electrodes to generate the GD discharge has been built and assayed. A comparison between LIBS and LA–GD–OES has been carried out, both, under reduced argon and helium atmospheres. Different sets of samples (conducting reference materials, glass and fluorine pellets) have been used to evaluate the novel coupled technique. The LA–GD coupled system has shown to provide lower detection limits. In addition, best linear correlations between intensities and concentrations and lower matrix effects have also been found using the coupled system. Moreover, special advantages of the LA–GD–OES have also been demonstrated for the analysis of fluorine.     

The development of a rapid method for the isolation of four azaspiracids for use as reference materials for quantitative LC–MS–MS methods

The azaspiracids are a family of lipophilic polyether marine biotoxins that have caused a number of human intoxication incidents in Europe since 1995 after consumption of contaminated shellfish (Mytilus edulis). Levels of azaspiracids in shellfish for human consumption are monitored in accordance with EU guidelines: only shellfish with less than 160 μg kg⁻¹ are deemed safe. The limited availability of commercially available standards for azaspiracids is a serious problem, because validated LC–MS methods are required for routine analysis of these toxins in shellfish tissues. The procedure described herein has been used for the separation and the isolation of four azaspiracid (AZA) toxins from shellfish, for use as LC–MS–MS reference materials. Five separation steps have been used to isolate azaspiracids 1, 2, 3, and 6. The purity of the toxins obtained has been confirmed by multiple mass spectrometric methods using authentic azaspiracid standards. The same techniques have been used for quantification of the toxins extracted. The isolation procedure involves several chromatographic purification techniques: solid-phase extraction (diol sorbent, 90% mass reduction, and 95 ± 1% toxin recovery); Sephadex size-exclusion chromatography (87% mass reduction and up to 95 ± 2% toxin recovery), Toyopearl HW size-exclusion chromatography (90% mass reduction and up to 92.5 ± 2.5% toxin recovery), and semi-preparative LC (78 ± 3% toxin recovery). The procedure effectively separates the toxins from the sample matrix and furnishes azaspiracid toxins (AZA1, AZA2, AZA3 and AZA6) of sufficient purity with an average yield of 65% (n = 5). Triple-quadrupole mass spectrometry was used for qualitative and quantitative monitoring of the isolation efficiency after each stage of the process. High-resolution mass spectrometric evaluation of the toxic isolated material in both positive and negative modes suggests high purity.     

Comparison of two quantitative GC–MS methods for analysis of tomato aroma based on purge-and-trap and on solid-phase microextraction

Two analytical procedures, one based on purge-and-trap and the other on solid phase microextraction, both followed by GC–MS measurement using an ion-trap mass spectrometer in the electron impact mode, have been developed for determination and quantitation of up to 39 aroma compounds in fresh tomatoes. The method based on purge-and-trap for isolation of the volatile compounds uses Tenax as adsorbent and a hexane–diethyl ether mixture as solvent for elution. The method was validated for linearity, precision (better than 20% for most compounds), and limit of detection, which was approximately 1 ng g⁻¹. This method enabled identification of up to 30 compounds in real samples. Use of SPME was considered as an alternative, to simplify sample treatment while maintaining the information level for the samples (e.g. the number of compounds detected) and quality of quantitation. A procedure based on SPME using a Carboxen/polydimethylsiloxane fibre was developed and validated for determination of 29 aroma compounds; precision was better than 20% and limits of detection ranged from 4 to 30 ng g⁻¹.     

Use of neutron activation analysis and LC–ICP-MS in the development of candidate reference materials for As species determination

Arsenic (As) is widely found in marine organisms, mainly as organic arsenical compounds. With the introduction of regulations for As species in foodstuffs and for environmental control, it has become more important to quantify the amount of arsenic species present. To address this concern new reference materials (RMs) for validation and quality assurance of As speciation measurements are being developed, including a tuna fish tissue and a robalo liver tissue. Instrumental neutron activation analysis (INAA) is used in this work as a proven analytical tool for As determinations and for validating the As mass fraction determined by liquid chromatography coupled to inductively coupled mass spectrometry (LC–ICP-MS) in extracts of the candidate RMs and other fish samples including certified RMs. Various methods for the extraction of water-soluble As species were evaluated. The best results were acquired after methanol/acetone/water extraction yielding in 93 % extractable As in the tuna RM. This procedure was used for the LC–ICP-MS studies. The results demonstrate that INAA can account for 100 % of the distribution of As species in analytical processes. It complements LC–ICP-MS for the validation of the characterization of As species in the development of RMs for such species. Excellent agreement of measured results in certified RMs with the reported values confirms the validity of the applied procedures.     

HPTLC–densitometric and HPTLC–MS methods for analysis of flavonoids

HPTLC silica gel plates without and with fluorescence indicator F₂₅₄ in combination with n-hexane–ethyl acetate–formic acid (20:19:1, v/v/v) as a developing solvent were explored for the HPTLC–densitometric and HPTLC–MS/(MSⁿ) analyses of flavonoids. Pre-development of the plates with chloroform–methanol (1:1, v/v) was needed for reliable HPTLC–densitometric analyses of flavonoid aglycones in the whole R_F range, while 2-step pre-development (1^st methanol–formic acid (10:1, v/v), 2^nd methanol), that decreased background signals of formic acid adducts, was required for HPTLC–MS analyses. Optimization with conditioning of the adsorbent layer with water before development and saturation of the twin trough chamber resulted in required decrease of the R_F values of studied flavonoids (flavone, apigenin, luteolin, chrysin, quercetin dihydrate, myricetin, kaempferide, kaempferol, naringenin, pinocembrin).

Detection was performed based on fluorescence quenching (on the plates with F₂₅₄), natural fluorescence and after post-chromatographic derivatization with natural product reagent without or with further enhancement and stabilization of fluorescent zones with polyethylene glycol (PEG 400 or PEG 4000) or paraffin–n-hexane reagents. For all three reagents, drying temperature and time passed after drying influenced the intensity, which was increasing the first 20?min, and the stability (less than 2?h for PEGs and at least 24?h for paraffin–n-hexane) of the standards’ zones.

Optimal wavelengths for densitometric evaluation were selected based on in-situ absorption spectra scanned before and after derivatization and after stabilization. The developed method was tested via analyses of propolis, roasted coffee, rose hip, hibiscus, rosemary and sage crude extracts. To further increase the reliability of the obtained densitometric results HPTLC–MS/(MSⁿ) analyses of all crude extracts were performed. Several phenolic and non-phenolic compounds were tentatively identified.

Some possible interferences with phenolic acids (chlorogenic acid, rosmarinic acid, protocatechuic acid, gallic acid, syringic acid, ellagic acid, trans-cinnamic acid, o-coumaric acid, m-coumaric acid, p-coumaric acid, caffeic acid, ferulic acid, sinapic acid) that are often present in the extracts together with flavonoids were also examined.     

Simultaneous chemical fingerprint and quantitative analysis of Ginkgo biloba extract by HPLC–DAD

A reverse-phase liquid chromatography method with diode array detection was developed to evaluate the quality of Ginkgo biloba extract through establishing chromatographic fingerprint and simultaneous determination of eight flavonoid compounds, namely rutin, myricetin, quercitrin, quercetin, luteolin, kaempferol, apigenin, and isorhamnetin. The chromatographic separation was performed on an Agilent SB-C18 column (250 × 4.6 mm, 5.0 μm) with a gradient elution program using a mixture of methanol and 0.1% formic acid (v/v) as mobile phase within 55 min at 360-nm wavelength. The correlation coefficients of similarity for different batches of G. biloba extract from the same manufacturer and G. biloba extract from different manufacturers were determined from the LC fingerprints, and they shared a close similarity. The eight flavonoid compounds showed good regression (R ² > 0.9995) within test ranges, and the recovery of the method was in the range of 94.1–101.4%. In addition, the content of those eight flavonoid compounds in G. biloba extract prepared by different manufacturers of China was determined to establish the effectiveness of the method. The results indicated that the developed method by having a combination of chromatographic fingerprint and quantification analysis could be readily utilized as a quality control method for G. biloba extract and its related traditional Chinese medicinal preparations.     

Preparation of calibration materials for microanalysis of Ti minerals by direct fusion of synthetic and natural materials: Experience with LA–ICP–MS analysis of some important minor and trace elements in ilmenite and rutile

Calibration materials for microanalysis of Ti minerals have been prepared by direct fusion of synthetic and natural materials by resistance heating in high-purity graphite electrodes. Synthetic materials were FeTiO₃ and TiO₂ reagents doped with minor and trace elements; CRMs for ilmenite, rutile, and a Ti-rich magnetite were used as natural materials. Problems occurred during fusion of Fe₂O₃-rich materials, because at atmospheric pressure Fe₂O₃ decomposes into Fe₃O₄ and O₂ at 1462?°C. An alternative fusion technique under pressure was tested, but the resulting materials were characterized by extensive segregation and development of separate phases. Fe₂O₃-rich materials were therefore fused below this temperature, resulting in a form of sintering, without conversion of the materials into amorphous glasses. The fused materials were studied by optical microscopy and EPMA, and tested as calibration materials by inductively coupled plasma mass spectrometry, equipped with laser ablation for sample introduction (LA–ICP–MS). It was demonstrated that calibration curves based on materials of rutile composition, within normal analytical uncertainty, generally coincide with calibration curves based on materials of ilmenite composition. It is, therefore, concluded that LA–ICP–MS analysis of Ti minerals can with advantage be based exclusively on calibration materials prepared for rutile, thereby avoiding the special fusion problems related to oxide mixtures of ilmenite composition. It is documented that sintered materials were in good overall agreement with homogeneous glass materials, an observation that indicates that in other situations also sintered mineral concentrates might be a useful alternative for instrument calibration, e.g. as alternative to pressed powders.     

Sandwich heterometallic coordination polymers consisting of copper-cluster pillars and layered networks of {Ln6} wheels: synthesis,structures, spectroscopic properties and Judd–Ofelt analysis

Transition Metal Chemistry - Two novel 3-D Ln(III)–Cu(I) heterometallic coordination polymers, [Ln2Cu2(L3)4(C2O4)2]·H2O (Ln?=?Sm, Eu; HL3?=?5-aminonicotinic...     

Recent advances of layered double hydroxides–based bifunctional electrocatalysts for ORR and OER

The oxygen reduction reaction (ORR) and the oxygen evolution reaction (OER) have attracted increasing attention for the sake of clean, renewable, and efficient energy technologies in recent years. The design of ORR/OER bifunctional electrocatalysts is a challenging task in the promotion of highly efficient rechargeable metal-air batteries as well as regenerative fuel cells. Owing to the wide adaptability of different types and ratios of metals in the interlayer space as well as the adjustable interlayer distance, composite materials with layered double hydroxides (LDHs) and their derivatives have recently been registered as electrode materials and catalysts supports for various electrochemical reactions. This study examines the recent development of bifunctional electrocatalysts based on LDHs for ORR/OER to expand the application of LDHs in the field of energy storage and conversion. Various bifunctional electrocatalysts associated with LDHs are discussed in detail to improve their performance. Finally, existing problems and future prospects for improving the performance of LDHs bifunctional electrocatalysts are proposed.     

Hybrid inorganic–organic layered structures of [AuCl4] and protonated bipyridyl derivatives

Complexes of [AuCl₄]⁻ with 4,4′-dipyridylethane, 4,4′-dipyridylethene and 4,4′-bipyridine-N,N′-dioxide have been prepared by a solvent layering method. All three complexes pack in distinct organic and inorganic layers: [H₂-dpa][AuCl₄]Cl (1) and [H₂-dpe][AuCl₄]Cl (2) are isostructural and consist of layers of [AuCl₄]⁻ anions alternating with hydrogen-bonded dipyridyl?Cl?dipyridyl layers. In [H-bpdo][AuCl₄] (3), the organic layers consist instead of hydrogen-bonded bipyridyldioxide cations. This structure is the first report of a structure containing protonated 4,4′-bipyridine-1,1′-dioxide.     

Investigation of preparation techniques for δ2H analysis of keratin materials and a proposed analytical protocol

Accurate hydrogen isotopic measurements of keratin materials have been a challenge due to exchangeable hydrogen in the sample matrix and the paucity of appropriate isotopic reference materials for calibration. We found that the most reproducible δ(2)H(VSMOW-SLAP) and mole fraction of exchangeable hydrogen, x(H)(ex), of keratin materials were measured with equilibration at ambient temperature using two desiccators and two different equilibration waters with two sets of the keratin materials for 6 days. Following equilibration, drying the keratin materials in a vacuum oven for 4 days at 60 °C was most critical. The δ(2)H analysis protocol also includes interspersing isotopic reference waters in silver tubes among samples in the carousel of a thermal conversion elemental analyzer (TC/EA) reduction unit. Using this analytical protocol, δ(2)H(VSMOW-SLAP) values of the non-exchangeable fractions of USGS42 and USGS43 human-hair isotopic reference materials were determined to be -78.5 ± 2.3 ‰ and -50.3 ± 2.8 ‰, respectively. The measured x(H)(ex) values of keratin materials analyzed with steam equilibration and N(2) drying were substantially higher than those previously published, and dry N(2) purging was unable to remove absorbed moisture completely, even with overnight purging. The δ(2)H values of keratin materials measured with steam equilibration were about 10 ‰ lower than values determined with equilibration in desiccators at ambient temperatures when on-line evacuation was used to dry samples. With steam equilibrations the x(H)(ex) of commercial keratin powder was as high as 28%. Using human-hair isotopic reference materials to calibrate other keratin materials, such as hoof or horn, can introduce bias in δ(2)H measurements because the amount of absorbed water and the x(H)(ex) values may differ from those of unknown samples. Correct δ(2)H(VSMOW-SLAP) values of the non-exchangeable fractions of unknown human-hair samples can be determined with atmospheric moisture equilibration by normalizing with USGS42 and USGS43 human-hair reference materials when all materials have the same powder size.     

Preparation and thermal analysis kinetics of the core–nanoshell composite materials doped with Sm

The core–nanoshell composite materials with magnetic fly-ash hollow cenosphere as core and nano SmFeO₃ as shell were synthesized by high-energy ball milling method. The magnetic fly-ash hollow cenosphere, samarium nitrate, and iron nitrate were used as raw materials. The synthesis and growth kinetics of the composite materials were investigated using the thermogravimetry and differential thermal analysis (TG–DTA) at different heating rates. The results show that the precursor of the composite materials decomposes in three steps. The apparent activation energy of each stage was calculated using the Doyle–Ozawa and Kissinger methods. The reaction order, frequency factor, and rate equations were also determined. The activation energy of the nano crystallite growth is calculated to be 16.12 kJ mol^?1 according to kinetics theory of nano crystallite growth. It can be inferred that the crystallite grows primarily by means of an interfacial reaction during the thermal treatment. The magnetic properties and microwave absorbing properties of samples were analyzed by the vibrating sample magnetometer analysis and vector network analyzer. The results indicated that the exchange coupling interaction happens between ferrite of magnetic fly-ash hollow cenosphere and nanosized ferrite coating, which cause outstanding magnetic properties. In the frequency between 1 MHz and 1 GHz, the absorbing effectiveness of the composite absorbers can achieve ?32 dB. The magnetic properties of the composite material are better than those of single phase. So it is consistent with requirements of the microwave absorbing material at the low-frequency absorption.     

Synthesis, cyclic voltammetry, and UV–Vis studies of ferrocene-dithiafulvalenes as anticipated electron-donor materials

Abstract  

New ferrocenyl ketones were obtained as precursors of novel π-conjugated ferrocene-dithiafulvalene (Fc-DTF) and π-extended-ferrocenedithia-fulvalenes (π-exFc-DTF) as electron-donor conducting materials from ferrocene by a direct aroylation process using the Friedel–Crafts reaction. Novel Fc-DTF conjugates were synthesized using the Wittig–Horner reaction and their structures were determined. The redox behavior of the ferrocenyl carbonyl compounds Fc-DTF and Fc-π-exDTF was investigated in comparison to the parent ferrocene by means of cyclic voltammetry. A one-electron redox behavior was observed for carbonylferrocenes as one wave potential, while a two-electron process was observed as two oxidation waves for the conjugates. Introduction of electron-withdrawing groups led to increasing E _pa values and decreasing ΔE _p values. The UV–Vis spectra of some compounds were studied in comparison with ferrocene. The absorption spectra showed a red-shift with a slight increase in the absorption intensities.