Electron transfer and electrocatalytic properties of the immobilized methionine80alanine cytochrome c variant

The M80A variant of yeast iso-1-cytochrome c (cytc), which features a noncoordinating Ala residue in place of the axial heme iron Met ligand, was chemisorbed on a gold electrode coated with 4-mercaptopyridine or carboxyalkanethiol self-assembled monolayers (SAM) and investigated by cyclic voltammetry at varying conditions of temperature, pH, and O2 concentration. The E degrees ' value (standard reduction potential for the heme Fe(III)/Fe(II) couple) of M80A cytc on both SAMs is of approximately -200 mV (vs the standard hydrogen electrode, SHE) at pH 7, which is more than 400 mV lower than that of native cytochrome c in the same conditions. The thermodynamics of Fe(III) to Fe(II) reduction and the kinetics of heterogeneous electron transfer (ET) are dominated by the presence of a hydroxide ion as the sixth axial heme iron ligand above pH 6. On both SAMs, protonation of the bound hydroxide ion is mainly responsible for the changes in these parameters at low pH, since the distances of ET between the heme and the electrode are found to be independent of pH in the range of 5-11. The invariance of the electrochemical features up to pH 11 indicates that no changes in heme iron coordination occur at high pH, at variance with native cytc. Most notably, immobilized M80A cytc is found to act as an efficient biocatalyst for O2 reduction from pH 5 to 11.0. This finding makes M80A cytc a suitable candidate as a constituent of a biocatalytic interface for O2 biosensing and opens the way for the exploitation of engineered cytochrome c in the bio-based detection of chemicals of environmental and clinical interest.     

Heterogeneous electron transfer at Au/SAM junctions in a room-temperature ionic liquid under pressure

Proven electrochemical approaches were applied to study heterogeneous electron transfer (ET) between selected redox couples and gold electrodes modified with alkanethiol self-assembled monolayers (SAMs), using the room-temperature ionic liquid (RTIL) [bmim][NTf2] as reaction medium; ferrocene as freely diffusing redox probe in the RTIL was tested for ET through both thin (butanethiol) and thick (dodecanethiol) assemblages at pressures up to 150 MPa; well behaved kinetic patterns and reproducibility of data were demonstrated for ET within the unique Au/SAM/RTIL arrays.     

Thermodynamics and Kinetics of Electron Transfer of Electrode-Immobilized Small Laccase from Streptomyces coelicolor

The thermodynamic and kinetic properties for heterogeneous electron transfer (ET) were measured for the electrode-immobilized small laccase (SLAC) from Streptomyces coelicolor subjected to different electrostatic and covalent protein-electrode linkages, using cyclic voltammetry. Once immobilized electrostatically onto a gold electrode using mixed carboxyl- and hydroxy-terminated alkane-thiolate SAMs or covalently exploiting the same SAM subjected to N-hydroxysuccinimide+1-Ethyl-3-(3-dimethylaminopropyl)carbodiimide (NHS-EDC) chemistry, the SLAC-electrode electron flow occurs through the T1 center. The E°′ values (from +0.2 to +0.1 V vs. SHE at pH 7.0) are lower by more than 0.2 V compared to the protein either in solution or immobilized with different anchoring strategies using uncharged SAMs. For the present electrostatic and covalent binding, this effect can, respectively, be ascribed to the negative charge of the SAM surfaces and to deletion of the positive charge of Lys/Arg residues due to amide bond formation which both selectively stabilize the more positively charged oxidized SLAC. Observation of enthalpy/entropy compensation within the series indicates that the immobilized proteins experience different reduction-induced solvent reorganization effects. The E°′ values for the covalently attached SLAC are sensitive to three acid base equilibria, with apparent pK_a values of pK_a1ox = 5.1, pK_a1red = 7.5, pK_a2ox = 8.4, pK_a2red = 10.9, pK_a2ox = 8.9, pK_a2red = 11.3 possibly involving one residue close to the T1 center and two residues (Lys and/or Arg) along with moderate protein unfolding, respectively. Therefore, the E°′ value of immobilized SLAC turns out to be particularly sensitive to the anchoring mode and medium conditions.     

Direct electrochemistry of Phanerochaete chrysosporium cellobiose dehydrogenase covalently attached onto gold nanoparticle modified solid gold electrodes

Achieving efficient electrochemical communication between redox enzymes and various electrode materials is one of the main challenges in bioelectrochemistry and is of great importance for developing electronic applications. Cellobiose dehydrogenase (CDH) is an extracellular flavocytochrome composed of a catalytic FAD containing dehydrogenase domain (DH(CDH)), a heme b containing cytochrome domain (CYT(CDH)), and a flexible linker region connecting the two domains. Efficient direct electron transfer (DET) of CDH from the basidiomycete Phanerochaete chrysosporium (PcCDH) covalently attached to mixed self-assembled monolayer (SAM) modified gold nanoparticle (AuNP) electrode is presented. The thiols used were as follows: 4-aminothiophenol (4-ATP), 4-mercaptobenzoic acid (4-MBA), 4-mercaptophenol (4-MP), 11-mercapto-1-undecanamine (MUNH(2)), 11-mercapto-1-undecanoic acid (MUCOOH), and 11-mercapto-1-undecanol (MUOH). A covalent linkage between PcCDH and 4-ATP or MUNH(2) in the mixed SAMs was formed using glutaraldehyde as cross-linker. The covalent immobilization and the surface coverage of PcCDH were confirmed with surface plasmon resonance (SPR). To improve current density, AuNPs were cast on the top of polycrystalline gold electrodes. For all the immobilized PcCDH modified AuNPs electrodes, cyclic voltammetry exhibited clear electrochemical responses of the CYT(CDH) with fast electron transfer (ET) rates in the absence of substrate (lactose), and the formal potential was evaluated to be +162 mV vs NHE at pH 4.50. The standard ET rate constant (k(s)) was estimated for the first time for CDH and was found to be 52.1, 59.8, 112, and 154 s(-1) for 4-ATP/4-MBA, 4-ATP/4-MP, MUNH(2)/MUCOOH, and MUNH(2)/MUOH modified electrodes, respectively. At all the mixed SAM modified AuNP electrodes, PcCDH showed DET only via the CYT(CDH). No DET communication between the DH(CDH) domain and the electrode was found. The current density for lactose oxidation was remarkably increased by introduction of the AuNPs. The 4-ATP/4-MBA modified AuNPs exhibited a current density up to 30 μA cm(-2), which is ～70 times higher than that obtained for a 4-ATP/4-MBA modified polycrystalline gold electrode. The results provide insight into fundamental electrochemical properties of CDH covalently immobilized on gold electrodes and promote further applications of CDHs for biosensors, biofuel cells, and bioelectrocatalysis.     

Surface‐Tuned Electron Transfer and Electrocatalysis of Hexameric Tyrosine‐Coordinated Heme Protein

Molecular modeling, electrochemical methods, and quartz crystal microbalance were used to characterize immobilized hexameric tyrosine‐coordinated heme protein (HTHP) on bare carbon or on gold electrodes modified with positively and negatively charged self‐assembled monolayers (SAMs), respectively. HTHP binds to the positively charged surface but no direct electron transfer (DET) is found due to the long distance of the active sites from the electrode surfaces. At carboxyl‐terminated surfaces, the neutrally charged bottom of HTHP can bind to the SAM. For this “disc” orientation all six hemes are close to the electrode and their direct electron transfer should be efficient. HTHP on all negatively charged SAMs showed a quasi‐reversible redox behavior with rate constant k_s values between 0.93 and 2.86 s^?1 and apparent formal potentials ${E{{0{^{\prime }}\hfill \atop {\rm app}\hfill}}}$ between ‐131.1 and ‐249.1 mV. On the MUA/MU‐modified electrode, the maximum surface concentration corresponds to a complete monolayer of the hexameric HTHP in the disc orientation. HTHP electrostatically immobilized on negatively charged SAMs shows electrocatalysis of peroxide reduction and enzymatic oxidation of NADH.     

Immobilization of the nanoparticle monolayer onto self-assembled monolayers by combined sterically enhanced hydrophobic and electrophoretic forces

The immobilization of surface-derivatized gold nanoparticles onto methyl-terminated self-assembled monolayers (SAMs) on gold surface was achieved by the cooperation of hydrophobic and electrophoretic forces. Electrochemical and scanning probe microscopy techniques were utilized to explore the influence of the SAM's structure and properties of the nanoparticle/SAM/gold system. SAMs prepared from 1-decanethiol (DT) and 2-mercapto-3-n-octylthiophene (MOT) were used as hydrophobic substrates. The DT SAM is a closely packed and organized monolayer, which can effectively block the underlying gold and inhibit a variety of solution species including organic and inorganic molecules from penetrating, whereas the MOT monolayer is poorly packed or disorganized (because of a large difference in dimension between the thiophene head and the alkylchain tail) and permeable to many organic probes in aqueous solution but not to inorganic probes. Thus, the MOT monolayer provides a more energetically favorable hydrophobic surface for the penetration and adsorption of organic species than the DT monolayer. This hypothesis is supported by experiments in which the density of hydrophobically immobilized nanoparticles on the MOT SAM is much larger than that on the DT SAM. The results also suggest new approaches for modification of macroscopic surfaces with nanoscopic particles.     

Catalytic reduction of dioxygen and nitrite ion at a Met80Ala cytochrome c-functionalized electrode

The Met80Ala variant of yeast iso-1-cytochrome c, immobilized on a gold electrode, is found to exchange electrons efficiently with it in nondenaturing conditions and to provide robust and persistent catalytic currents for O 2 and nitrite ion reduction from pH 3 to 11. Direct covalent protein linkage to gold yields the best electrochemical and electrocatalytic performances without drastically affecting the structural properties of the bound protein compared to the freely diffusing species. Therefore, this biocatalytic interface can be of use for the amperometric detection of the above species, which are of great environmental, industrial, and clinical interest, with particular reference to the exploitation in nanostructured biosensing devices. This work shows that the use of a small engineered electron transfer (ET) protein, featuring an axial heme iron coordination position available for the binding of exogenous ligands, in place of a large heme enzyme is a viable strategy for the improvement of the heterogeneous ET rate and the stability and efficiency of sensing gold-protein interfaces over a wide range of T and pH.     

DNA-modified electrodes; part 4: optimization of covalent immobilization of DNA on self-assembled monolayers

The covalent immobilization of DNA onto self-assembled monolayer (SAM) modified gold electrodes (SAM/Au) was studied by X-ray photoelectron spectrometry and electrochemical method so as to optimize its covalent immobilization on SAMs. Three types of SAMs with hydroxyl, amino, and carboxyl terminal groups, respectively, were examined. Results obtained by both X-ray photoelectron spectrometry and cyclic voltammetry show that the largest covalent immobilization amount of dsDNA could be gained on hydroxyl-terminated SAM/Au. The ratio of amount of dsDNA immobilized on hydroxyl-terminated SAMs to that on carboxyl-terminated SAMs and to that on amino-terminated SAMs is (3-3.5): (1-1.5): 1. The dsDNA immobilized covalently on hydroxyl-terminated SAMs accounts for 82.8-87.6% of its total surface amount (including small amount of dsDNA adsorbed). So the hydroxyl-terminated SAM is a good substrate for the covalent immobilization of dsDNA on gold surfaces.     

Immobilization of gold nanorods onto acid-terminated self-assembled monolayers via electrostatic interactions

We report the immobilization of gold nanorods onto self-assembled monolayers (SAMs) of 16-mercaptohexadecanoic acid (16-MHA). The simple two step protocol involves formation of a SAM of 16-MHA molecules onto gold-coated glass slides and subsequent immersion of these slides into the gold nanorod solution. The nanorods, formed by a seed-mediated, surfactant-assisted synthesis protocol, are stabilized in solution due to surface modification by the surfactant cetyltrimethylammonium bromide (CTAB). Attractive electrostatic interactions between the carboxylic acid group on the SAM and the positively charged CTAB molecules are likely responsible for the nanorod immobilization. UV-vis spectroscopy has been used to follow the kinetics of the nanorod immobilization. The nature of interaction between the gold nanorods and the 16-MHA SAM has been probed by Fourier transform infrared spectroscopy (FTIR). The surface morphology of the immobilized rods is studied by scanning electron microscopy (SEM) and atomic force microscopy (AFM) measurements. SEM was also used to determine the density of the immobilized nanorods as a function of the pH of immobilization. Control over the surface coverage of the immobilized gold nanorods has been demonstrated by simple pH variation. Such well-dispersed immobilized gold nanorods with control over the surface coverage could be interesting substrates for applications such as surface-enhanced Raman spectroscopy (SERS).     

Long-range interfacial electron transfer and electrocatalysis of molecular scale <Emphasis Type="Italic">Prussian</Emphasis> Blue nanoparticles linked to Au(111)-electrode surfaces by different chemical contacting groups

We have explored interfacial electrochemical electron transfer (ET) and electrocatalysis of 5–6 nm Prussian Blue nanoparticles (PBNPs) immobilized on Au(111)-electrode surfaces via molecular wiring with variable-length, and differently functionalized thiol-based self-assembled molecular monolayers (SAMs). The SAMs contain positively (?NH₃ ⁺) or negatively charged (–COO–) terminal group, as well an electrostatically neutral hydrophobic terminal group (–CH₃). The surface microscopic structures of the immobilized PBNPs were characterized by high-resolution atomic force microscopy (AFM) directly in aqueous electrolyte solution under the same conditions as for electrochemical measurements. The PBNPs displayed fast and reversible interfacial ET on all the surfaces, notably in multi-ET steps as reflected in narrow voltammetric peaks. The ET kinetics can be controlled by adjusting the length of the SAM forming linker molecules. The interfacial ET rate constants were found to depend exponentially on the ET distance for distances longer than a few methylene groups in the chain, with decay factors (β) of 0.9, 1.1, and 1.3 per CH₂, for SAMs terminated by ?NH₃ ⁺,–COO–, and–CH₃, respectively. This feature suggests, first that the interfacial ET processes follow a tunneling mechanism, resembling that of metalloproteins in a similar assembly. Secondly, the electronic contact of the SAM terminal groups that anchor non-covalently the PBNP are crucial as reported for other types of molecular junctions. Highly efficient PBNP electrocatalysis of H₂O₂ reduction was also observed for the three linker groups, and the electrocatalytic mechanisms analyzed.     

Redox and electrocatalytic properties of mimochrome VI, a synthetic heme peptide adsorbed on gold

Mimochrome VI (MC-VI) is a synthetic heme peptide containing a helix-heme-helix sandwich motif designed to reproduce the catalytic activity of heme oxidases. The thermodynamics of Fe(III) to Fe(II) reduction and the kinetics of the electron-transfer process for MC-VI immobilized through hydrophobic interactions on a gold electrode coated with a nonpolar SAM of decane-1-thiol have been determined through cyclic voltammetry. Immobilization slightly affects the reduction potential of MC-VI, which under these conditions electrocatalytically turns over molecular oxygen. This work sets the premise for the exploitation of totally synthetic mimochrome-modified electrode surfaces for clinical and pharmaceutical biosensing.     

Electron transfer dynamics of cytochrome c bound to self-assembled monolayers on silver electrodes.

Cytochrome c (Cyt-c) was electrostatically immobilised on Ag electrodes coated with self-assembled monolayers (SAM) that are formed by omega-carboxyl alkanethiols with different alkyl chain lengths (C(x)). Surface enhanced resonance Raman (SERR) spectroscopy demonstrated that electrostatic binding does not lead to conformational changes of the heme protein under the conditions of the present experiments. Employing time-resolved SERR spectroscopy, the rate constants of the heterogeneous electron transfer (ET) between the adsorbed Cyt-c and the Ag electrode were determined for a driving force of zero electronvolts. For SAMs with long alkyl chains (C(16), C(11)), the rate constants display a normal exponential distance dependence, whereas for shorter chain lengths (C(6), C(3), C(3)), the ET rate constant approaches a constant value (ca. 130 s(-1)). The onset of the non-exponential distance-dependence is paralleled by an increasing kinetic H/D effect, indicating a coupling of the redox reaction with proton transfer (PT) steps. This unusual kinetic behaviour is attributed to the effect of the electric field at the Ag/SAM interface that increasingly raises the energy barrier for the PT processes with decreasing distance of the adsorbed Cyt-c from the electrode. The distance-dependence of the electric field strength is estimated on the basis of a simple electrostatic model that can consistently describe the redox potential shifts of Cyt-c as determined by stationary SERR spectroscopy for the various SAMs. At low electric fields, PT is sufficiently fast so that rate constants, determined as a function of the driving force, yield the reorganisation energy (0.217 electronvolts) of the heterogeneous ET.     

Impact of surface immobilization and solution ionic strength on the formal potential of immobilized cytochrome C

Four different self-assembled monolayer (SAM) electrode systems were examined electrochemically in order to better understand surface charge effects on the redox thermodynamics of immobilized horse heart cytochrome c (cyt c). Neutralization of protein surface charge upon adsorption on anionic COOH-terminated SAMs was found to cause substantial changes in the formal potential, as determined by cyclic voltammetry. For cyt c immobilized on negatively charged surfaces, the formal potential shifted to more negative values as the ionic strength was decreased, which is opposite to the trend displayed by solution cyt c. In contrast, immobilization to uncharged interfaces resulted in an ionic strength dependence for cyt c that is similar to its solution behavior. The results provide insight into the importance of surface charge on the formal potential of cyt c.     

Mixed charged zwitterionic self-assembled monolayers as a facile way to stabilize large gold nanoparticles

Here we report a facile way of stabilizing large gold nanoparticles (AuNPs) by mixed charged zwitterionic self-assembled monolayers (SAMs). The citrate-capped AuNPs with diameters ranging from 16 nm to even ～100 nm are well stabilized via a simple place exchange reaction with a 1:1 molar ratio mixture of negatively charged sodium 10-mercaptodecanesulfonic acid (HS-C10-S) and positively charged (10-mercaptodecyl)-trimethyl-ammonium bromide (HS-C10-N4). The 16 nm AuNPs protected by mixed charged zwitterionic SAMs not only show much better stability than the single negatively or positively charged AuNPs, but also exhibit exciting stability as well as those modified by monohydroxy (1-mercaptoundec-11-yl) tetraethylene glycol (HS-C11-EG4). Importantly, 16 nm AuNPs protected by mixed SAMs exhibit good stability in cell culture medium with 10% FBS and strong protein resistance, especially with excellent resistance against plasma adsorption. Moreover, the mixed charged zwitterionic SAMs are also able to well-stabilize larger AuNPs with a diameter of 50 nm, and to help remarkably improve their stability in saline solution compared with HS-C11-EG4 protected ones. When it comes to AuNPs with a diameter of 100 nm, the mixed charged zwitterionic SAM protected nanoparticles retain a smaller hydrodynamic diameter and even better long-term stability than those modified by mercaptopolyethylene glycol (M(w) = 2000, HS-PEG2000). The above results demonstrated that the mixed charged zwitterionic SAMs are able to have a similar effect on stabilizing the large gold nanoparticles just like the single-component zwitterionic SAMs. Concerning its ease of preparation, versatility, and excellent properties, the strategy based on the mixed charged zwitterionic SAM protection might provide a promising method to surface tailoring of nanoparticles for biomedical application.     

Determination of the orientation of adsorbed cytochrome C on carboxyalkanethiol self-assembled monolayers by in situ differential modification

The contact domain utilized by horse cytochrome c when adsorptively bound to a C(10)COOH self-assembled monolayer (SAM) was delineated using a chemical method based on differential modification of surface amino acids. Horse cytochrome c was adsorbed at low ionic strength (pH 7.0, 4.4 mM potassium phosphate) onto 10 microm diameter gold particles coated with HS(CH(2))(10)COOH SAMs. After in situ modification of lysyl groups by reductive Schiff-base methylation, the protein was desorbed, digested using trypsin, and the peptide mapped using LC/MS. Relative lysyl reactivities were ascertained by comparing the resulting peptide frequencies to control samples of solution cytochrome c modified to the same average extent. The least reactive lysines in adsorbed cytochrome c were found to be 13, 72, 73, 79, and 86-88, consistent with a contact region located up and to the left (Met-80 side) of the solvent-exposed heme edge (conventional front face view). The most reactive lysines were 39, 53, 55, and 60, located on the lower backside. The proposed orientation features a heme tilt angle of approximately 35-40 degrees with respect to the substrate surface normal. Factors that can complicate or distort data interpretation are discussed, and the generality of differential modification relative to existing in situ methods for protein orientation determination is also addressed.     

Effect of amino,hydroxyl, and carboxyl terminal groups of alkyl chains of self-assembled monolayers on the adsorption pattern of gold nanoparticles

The adsorption pattern of gold nanoparticles (AuNPs) on functionalized self-assembled monolayers (SAMs) produced on a Au(111) surface was characterized. The Au(111) was modified with 11-amino-1-undecanethiol hydrochloride (AUT), 11-mercapto-1-undecanol (MUT), or 11-mercaptoundecanoic acid (MUA) at an elevated temperature and pressure. The AuNPs aggregated on the AUT-SAM surface, whereas they were well dispersed on the MUT-SAM surface and localized on the MUA-SAM surface. The results suggest that interactions between AuNPs differ according to the degree of peeling of citrate-layer-capped AuNPs. The degree of peeling, which is related to both the surface randomness of the SAMs and the functional characteristics of the terminal group of each SAM, was discussed on the basis of scanning tunneling microscopy observations, X-ray photoelectron spectroscopic analyses, and contact angle measurements. Our study shows that AuNP patterns can be controlled by changing the terminal group of the alkyl thiol SAM on a Au(111) surface.     

The Influence of Molecular Dipole Moment on the Redox-Induced Reorganization of α-Helical Peptide Self-Assembled Monolayers: An Electrochemical SPR Investigation

Self-assembled monolayers (SAMs) of ferrocene-labeled α-helical peptides were prepared on gold surfaces and studied using electrochemical surface plasmon resonance (EC-SPR). The leucine-rich peptides were synthesized with a cysteine sulfhydryl group either at the C- or N-terminus, enabling their immobilization onto gold surfaces with control of the direction of the molecular dipole moment. Two electroactive SAMs were studied, one in which all of the peptide dipole moments are oriented in the same direction (SAM1), and the other in which the peptide dipole moment of one peptide is aligned in the opposite direction to that of its surrounding peptide molecules (SAM2). Cyclic voltammetry combined with SPR measurements revealed that SAM reorientations concomitant with the oxidation of the ferrocene label were more significant in SAM2 than in SAM1. The substantially greater change in the peptide film thickness in the case of SAM2 is attributed to the electrostatic repulsion between the electrogenerated ferrocinium moiety and the positively charged gold surface. The greater permeability of SAM1 to electrolyte anions, on the other hand, appears to effectively neutralize this electrostatic repulsion. The film thickness change in SAM2 was estimated to be 0.25 ± 0.05 nm using numerical simulation. The timescale of the redox-induced SPR changes was established by chronoamperometry and time-resolved SPR measurements, followed by fitting of the SPR response to a stretched exponential function. The time constants measured for the anodic process were 16 and 6 ms for SAM1 and SAM2 respectively, indicating that the SAM thickness changes are notably fast.     

Role of surface heterogeneity and molecular interactions in the charge-transfer process through self-assembled thiolate monolayers on Au(111)

A comparative study of charge-transfer processes from/to methyl-terminated and carboxylate-terminated thiolate-covered Au(111) surfaces to/from immobilized methylene blue (MB) molecules is presented. Scanning tunneling microscopy images with molecular resolution reveal the presence of molecular-sized defects, missing rows, and crystalline domains with different tilts that turn the thickness of the alkanethiolate SAM (the spacer) uncertain. The degree of surface heterogeneity at the SAMs increases as the number of C units (n) in the hydrocarbon chain decreases from n = 6. Defective regions act as preferred paths for MB incorporation into the methyl-terminated SAMs, driven by hydrophobic forces. The presence of negative-charged terminal groups at the SAMs reduces the number of molecules that can be incorporated, immobilizing them at the outer plane of the monolayer. Only MB molecules incorporated into the SAMs close to the Au(111) surface (at a distance < 0.5 nm) are electrochemically active. MB molecules trapped in different defects explain the broad shape and humps observed in the voltammogram of the redox couple. The heterogeneous charge-transfer rate constants for MB immobilized into methyl-terminated thiolate SAMs are higher than those estimated for carboxylate- terminated SAMs, suggesting a different orientation of the immobilized molecule in the thiolate environment.     

Chemistry on surface-confined molecules: an approach to anchor isolated functional units to surfaces.

The synthesis of surface-confined, nanometer-sized dendrimers and Au nanoparticles was performed starting from single Pd(II) pincer adsorbate molecules (10) embedded as isolated species into 11-mercapto-1-undecanol and decanethiol self-assembled monolayers (SAMs) on gold. The coordination of monolayer-protected Au nanoclusters (MPCs) bearing phosphine moieties at the periphery (13), or dendritic wedges (8) having a phosphine group at the focal point, to SAMs containing individual Pd(II) pincer molecules was monitored by tapping mode atomic force microscopy (TM AFM). The individual Pd(II) pincer molecules embedded in the decanethiol SAM were visualized by their coordination to phosphine MPCs 13; isolated objects with a height of 3.5 +/- 0.7 nm were observed by TM AFM. Reaction of these embedded Pd(II) pincer molecules with the dendritic wedge 8 yielded individual molecules with a height of 4.3 +/- 0.2 nm.     

Electrochemical Investigation of Cytochrome c Immobilized onto Self‐Assembled Monolayer of Captopril

The electrochemical behavior of cytochrome c (cyt‐c) that was electrostatically immobilized onto a self‐assembled monolayer (SAM) of captopril (capt) on a gold electrode has been investigated. Cyclic voltammetry, scanning electrochemical microscopy (SECM) and electrochemical impedance spectroscopy were employed to evaluate the blocking property of the capt SAM. SECM was used to measure the bimolecular electron transfer (ET) kinetics (k_BI) between a solution‐based redox probe and the immobilized protein. In addition, the tunneling ET between the immobilized protein and the underlying gold electrode was calculated. A k_BI value of (5.0±0.6)×10⁸ mol^?1 cm³ s^?1 for the bimolecular ET and a standard tunneling rate constant (k⁰) of 46.4±0.2 s^?1 for the tunneling ET have been obtained.